Study on the Effect of Bleaching Treatment on the Mechanical Properties of Kenaf Fibers

2020 ◽  
Vol 1000 ◽  
pp. 278-284
Author(s):  
Yuli Amalia Husnil ◽  
Evana Yuanita ◽  
Nurfitri Ramadhani ◽  
Mochamad Chalid
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Mechanical Strength ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Annual Growth Rate ◽  
Kenaf Fiber ◽  
Market Growth ◽  
Compound Annual Growth Rate ◽  
Bleaching Treatment

Automotive industries are trying to reduce the weight of cars by replacing parts that are made of steel and aluminum with lighter material but equally strong. It is an emerging trend in these industries to utilize polypropylene reinforced with natural fiber as the alternative lightweight material. PP-natural fiber composite is projected to have market growth with compound annual growth rate (CAGR) of 9.5% within 2018-2025. Blending PP with natural fiber is a challenging process considering these two materials are not compatible enough to produce composite with desired mechanical properties. Prior treatment to the fiber is required to improve its compatibility with PP with cautionary that it does not degrading the mechanical strength of the fiber. The aim of this work was to study the effect of chemical treatment on Kenaf fiber to the tensile strength of the fiber. Kenaf fiber was bleached with NaClO solution at various concentration (1-10% v/w), temperature (25-55°C), and duration (1-6 hours). The effect of bleaching treatment to the chemical structure and the tensile strength of the fiber was analyzed using FTIR and UTM respectively. This study showed that the fiber with highest tensile strength was the one that treated with NaClO solution with concentration 1% v/w, at 25°C for 1 hour. This treatment removed impurities for the surface and reduced some amorphous part of the fiber. However further increasing NaClO concentration, mixing temperature and duration will damage the cellulose chain in Kenaf fiber which will decrease the mechanical strength of the fiber.

scholarly journals Effect of Environmental Degradation on Mechanical Properties of Kenaf/Polyethylene Terephthalate Fiber Reinforced Polyoxymethylene Hybrid Composite

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Mohamad Zaki Abdullah ◽  
Yakubu Dan-mallam ◽  
Puteri Sri Melor Megat Yusoff
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Environmental Degradation ◽  
Hybrid Composite ◽  
Fiber Composite ◽  
Accelerated Weathering ◽  
Fiber Reinforced ◽  
Kenaf Fiber ◽  
Pet Fibers ◽  
Outdoor Application

The main objective of this research is to investigate the effect of environmental degradation on the mechanical properties of kenaf/PET fiber reinforced POM hybrid composite. Kenaf and PET fibers were selected as reinforcements because of their good mechanical properties and resistance to photodegradation. The test samples were produced by compression molding. The samples were exposed to moisture, water spray, and ultraviolet penetration in an accelerated weathering chamber for 672 hours. The tensile strength of the long fiber POM/kenaf (80/20) composite dropped by 50% from 127.8 to 64.8 MPa while that of the hybrid composite dropped by only 2% from 73.8 to 72.5 MPa. This suggests that the hybrid composite had higher resistance to tensile strength than the POM/kenaf composite. Similarly, the results of flexural and impact strengths also revealed that the hybrid composite showed less degradation compared to the kenaf fiber composite. The results of the investigation revealed that the hybrid composite had better retention of mechanical properties than that of the kenaf fiber composites and may be suitable for outdoor application in the automotive industry.

scholarly journals Mechanical Properties of Banana Fabric and Kenaf Fiber Reinforced Epoxy Composites: Effect of Treatment and Hybridization

2019 ◽  
Vol 8 (10) ◽  
pp. 1870-1874
Keyword(s):  
Mechanical Properties ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Fiber Reinforced Composites ◽  
Synthetic Fiber ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Kenaf Fiber ◽  
Fiber Reinforced Composite ◽  
Reinforced Composite

Nowadays, Natural Fiber Reinforced composites (NFCs) are emerging to be a good substitute for synthetic fiber reinforced composites as NFCs have many advantages such as low density, high specific strength, recyclability, low cost and good sound abatement quality etc. Among all types of NFCs, a vast study has been done on banana fiber and kenaf fiber reinforced composite. However, only limited work has been done on the banana fabric, kenaf fiber reinforced composite and the effect of their hybridization on mechanical properties. In this paper, an attempt has been made to study the mechanical properties of the banana fabric, kenaf fiber and hybrid banana fabric/kenaf fiber reinforced composites. Effect of alkali treatment on kenaf fiber reinforced composite is discussed in the paper. For the present work, plain-woven banana fabric and randomly oriented kenaf fiber are used as reinforcement while the epoxy resin is used as a matrix. samples are fabricated using hand lay-up and vacuum bagging method. Curing is done at ambient temperature (250C-300C) for 48h. Tensile, impact and hardness test has been performed on a specimen according to ASTM standards. Improvement in mechanical properties is observed after alkali (6% NaOH) treatment on kenaf fiber reinforced composite. Tensile testing behavior of randomly oriented kenaf fiber composite has been studied using Finite element method and results are compared with experimental investigations. This topic present big potential because it seeks to find solution for sustainable development with environmental concerns.

Environmental Degradation Behavior of Kenaf Fiber Mat Composite

2014 ◽  
Author(s):  
Mengyuan Liao ◽  
Toshihiko Hojo ◽  
Guijun Xian ◽  
Yuqiu Yang ◽  
Hiroyuki Hamada
Keyword(s):  
Mechanical Properties ◽  
Weight Change ◽  
Fossil Fuels ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Unsaturated Polyester ◽  
Extreme Temperature ◽  
Performance Ratio ◽  
Monsoon Climate ◽  
Kenaf Fiber

Nowadays “eco-design” is becoming a philosophy to guide next generation of materials and products as global environmental issue produced by fossil fuels and resource overusing. With an industrial increasing interest in sustainable, eco-efficient and green material’s application, natural fiber in polymer composite is guided to develop rapidly. As well know that, natural fibers possess advantages over synthetic or manmade fibers due to its abundance, biodegradability, CO2 neutrality, excellent price/performance ratio and comparable specific strength properties. However, outdoor applications of natural fiber composite are still constrained and raising concerns in terms of their durability, including UV resistance, moisture resistance and extreme temperature withstand and dimensional stability. Continuing with previous research on kenaf non-woven reinforced unsaturated polyester composites three months degradation performance, in order to get a good knowledge of its degradation process/cycle in complicated outdoor environments, longer degradation periods up to 6 months and 12 months in this paper were added for further investigation and comparison. Initially, three sets of kenaf fiber mat composite samples were located in extreme cold temperature (Harbin), mild sea climate Kyoto (Japan), subtropical marine monsoon climate Shanghai (China) and tropical monsoon climate Zaria (Nigeria) respectively from the same starting time until predetermined ageing periods, afterwards weight change and mechanical behavior in terms of tensile, flexural, impact and fracture toughness were measured instrumentally for ageing effect discussion and comparison. As expected, the aged specimens in those different positions all showed the dropped mechanical properties with increasing ageing periods. Furthermore, the trend of degradation in various mechanical parameters was established, which demonstrated weight loss made more serious effect on aged sample’s mechanical properties’ reduction than water absorption behavior. In a word, dropped mechanical properties of the degraded composites accompanied with weight change behavior were clarified, in which degradation phenomenon of embrittled the matrix polymer, deteriorated reinforced fiber and interfacial properties were detected.

Optically Transparent Polymethyl Methacrylate Composites made with Glass Fibers of Varying Refractive Index

1997 ◽  
Vol 12 (4) ◽  
pp. 1091-1101 ◽  
Author(s):  
Seunggu Kang ◽  
Hongy Lin ◽  
Delbert E. Day ◽  
James O. Stoffer
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Refractive Index ◽  
Mechanical Strength ◽  
Glass Fiber ◽  
Polymethyl Methacrylate ◽  
Optical Transmission ◽  
Annealing Temperature ◽  
Glass Fibers ◽  
Optically Transparent

The dependence of the optical and mechanical properties of optically transparent polymethyl methacrylate (PMMA) composites on the annealing temperature of BK10 glass fibers was investigated. Annealing was used to modify the refractive index (R.I.) of the glass fiber so that it would more closely match that of PMMA. Annealing increased the refractive index of the fibers and narrowed the distribution of refractive index of the fibers, but lowered their mechanical strength so the mechanical properties of composites reinforced with annealed fibers were not as good as for composites containing as-pulled (chilled) glass fibers. The refractive index of as-pulled 17.1 μm diameter fibers (R.I. = 1.4907) increased to 1.4918 and 1.4948 after annealing at 350 °C to 500 °C for 1 h or 0.5 h, respectively. The refractive index of glass fibers annealed at 400 °C/1 h best matched that of PMMA at 589.3 nm and 25 °C, so the composite reinforced with those fibers had the highest optical transmission. Because annealed glass fibers had a more uniform refractive index than unannealed fibers, the composites made with annealed fibers had a higher optical transmission. The mechanical strength of annealed fiber/PMMA composites decreased as the fiber annealing temperature increased. A composite containing fibers annealed at 450 °C/1 h had a tensile strength 26% lower than that of a composite made with as-pulled fibers, but 73% higher than that for unreinforced PMMA. This decrease was avoided by treating annealed fibers with HF. Composites made with annealed and HF (10 vol. %)-treated (for 30 s) glass fibers had a tensile strength (∼200 MPa) equivalent to that of the composites made with as-pulled fibers. However, as the treatment time in HF increased, the tensile strength of the composites decreased because of a significant reduction in diameter of the glass fiber which reduced the volume percent fiber in the composite.

Preparation Techniques and Property Evaluations of Highly Air Permeable Needle-Punched Geotextiles

2015 ◽  
Vol 749 ◽  
pp. 278-281
Author(s):  
Jia Horng Lin ◽  
Jing Chzi Hsieh ◽  
Jin Mao Chen ◽  
Wen Hao Hsing ◽  
Hsueh Jen Tan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Service Life ◽  
Mechanical Strength ◽  
Pore Structure ◽  
Test Results ◽  
Needle Punching ◽  
Pet Fibers ◽  
Environmental Requirements ◽  
Preparation Techniques

Geotextiles are made of polymers, and their conjunction with different processes and materials can provide geotextiles with desirable characteristics and functions, such as filtration, separation, and drainage, and thereby meets the environmental requirements. Chemical resistant and mechanical strong polymers, including polyester (PET) and polypropylene (PP), are thus used to prolong the service life of the products made by such materials. This study proposes highly air permeable geotextiles that are made with different thicknesses and various needle punching speeds, and the influences of these two variables over the pore structure and mechanical properties are then examined. PET fibers, PP fibers, and recycled Kevlar fibers are blended, followed by being needle punched with differing spaces and speeds to form geotextiles with various thicknesses and porosities. The textiles are then evaluated for their mechanical strength and porosity. The test results show that a thickness of 4.5 cm and 1.5 cm demonstrate an influence on the tensile strength of the geotextiles, which is ascribed to the webs that are incompletely needle punched. However, the excessive needle punching speed corresponding to a thickness of 0.2 cm results in a decrease in tensile strength, but there is also an increase in the porosity of the geotextiles.

scholarly journals Effects of High-Temperature Exposure on the Mechanical Properties of Kenaf Composites

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1643 ◽  
Author(s):  
Nabilah Afiqah Mohd Radzuan ◽  
Dulina Tholibon ◽  
Abu Bakar Sulong ◽  
Norhamidi Muhamad ◽  
Che Hassan Che Haron
Keyword(s):  
Mechanical Properties ◽  
Natural Fiber ◽  
Molding Process ◽  
Kenaf Fiber ◽  
Polypropylene Composites ◽  
Safety Issues ◽  
Automotive Parts ◽  
Kenaf Composites ◽  
Temperature Exposure ◽  
Kenaf Fibers

Automotive parts, including dashboards and trunk covers, are now fabricated through a compression-molding process in order to produce lightweight products and optimize fuel consumption. However, their mechanical strength is not compromised to avoid safety issues. Therefore, this study investigates kenaf-fiber-reinforced polypropylene composites using a simple combing approach to unidirectionally align kenaf fibers at 0°. The kenaf composite was found to withstand a maximal temperature of 120 °C. The tensile and flexural strengths of the aligned kenaf composites (50 and 90 MPa, respectively) were three times higher than those of the commercialized Product T (between 39 and 30.5 MPa, respectively) at a temperature range of 90 to 120 °C. These findings clearly showed that the mechanical properties of aligned kenaf fibers fabricated through the combing technique were able to withstand high operating temperatures (120 °C), and could be used as an alternative to other commercial natural-fiber products.

scholarly journals Thermal and Mechanical properties of epoxy-jute fiber composite

2014 ◽  
Vol 27 (2) ◽  
pp. 77-82 ◽  
Author(s):  
H Ahmad ◽  
MA Islam ◽  
MF Uddin
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Tensile Strength ◽  
Fiber Length ◽  
Epoxy Composite ◽  
Fiber Composite ◽  
Young Modulus ◽  
Fiber Content ◽  
Jute Fiber ◽  
Elongation At Break

Chopped jute fiber-epoxy composites with varying fiber length (2-12 mm) and mass fraction (0.05-0.35) had been prepared by a heat press unit. The cross-linked product was characterized in terms of specific gravity, thermal conductivity, tensile strength, Young modulus and elongation at break. The transverse thermal conductivities for randomly oriented fibers in the composite were investigated by Lees and Charlton’s method. The tensile strength, Young modulus and elongation at break were investigated by a Universal Tensile Tester. With an increase in the fiber content (irrespective of the fiber length), the thermal conductivity of the composite decreases; the decreasing rate being highest for the fiber length of 2 mm followed by that for the fiber length of 6 and 12 mm. The decreasing rate of the thermal conductivity of the jute-epoxy composite is comparatively higher to that reported in literature for acrylic polymer hemp fiber composite. The tensile strength also decreases with the increase of the fiber content in the composite. The fiber length does not show to have significant effect on the tensile strength of the composite; the variation in strength being masked within experimental error. The Young modulus increases with the increase of fiber content within elastic limit; showing the highest values for the fiber length of 6 mm followed by those for the fiber length of 2 mm and 12 mm. The elongation at break shows slightly increasing trend up to 15% fiber content, but beyond that it decreases drastically. The specific gravity decreases with the increase in the fiber content and thus the recalculated specific tensile strength is found to keep at a stable level of 36MPa up to the fiber content of 20%, and beyond that the specific tensile strength decreases with the increase in the fiber content. It is concluded that jute fiber-epoxy composite could be used as a good heat-insulating material. Further investigation is recommended on the improvement of the thermal insulation keeping the mechanical properties unchanged or even improved. The TGA study is also required to ascertain the field of application of the material. DOI: http://dx.doi.org/10.3329/jce.v27i2.17807 Journal of Chemical Engineering, IEB Vol. ChE. 27, No. 2, December 2012: 77-82

scholarly journals Mechanical properties of kenaf fibrous pulverized fuel ash concrete

2018 ◽  
Vol 250 ◽  
pp. 05007
Author(s):  
Norazura Mizal Azzmi ◽  
Jamaludin Mohamad Yatim ◽  
Hazlan Abdul Hamid ◽  
Azmahani Abdul Aziz ◽  
Adole Michael Adole
Keyword(s):  
Mechanical Properties ◽  
Natural Fiber ◽  
Coal Ash ◽  
Physical And Mechanical Properties ◽  
Short Fiber ◽  
Pozzolanic Reaction ◽  
Strength Development ◽  
Kenaf Fiber ◽  
Fuel Ash ◽  
Pulverized Fuel

The main objective of the experimental work is to identify the mechanical properties of Kenaf Fiber incorporate with Ordinary Portland Cement (OPC) and Pulverised Fuel Ash (PFA) in the mix proportions of concrete. Kenaf Fibrous Concrete (KFC) and Kenaf Fibrous Pulverised Fuel Ash Concrete (KFPC) will be measured on physical and mechanical properties in order to investigate the suitability of this natural fiber as a composite material. A comparison of properties between these two composites will determine the density, workability, compressive, tensile, and flexural strength of the concrete. Eight different mixes with varying percentage of Kenaf fiber were prepared with 30N/mm2 strength at 28days ,56 days and 90 days. Short fiber with 25mm and 50mm length were randomly distribute in composite to enhance the tensile and durability. PFA was obtained by the process of burning in the Power Station Coal Ash at Tanjung Bin, Johor. The unburning powder from the process is called as a PFA generally suitable for cement replacement in the concrete mix. The pozzolanic reaction will improve the adhesion of cement gel, hence increased the properties of concrete in a long-term strength development. The result shows that the inclusion of Kenaf fiber improve tensile strength of composite, furthermore the 25% PFA mix increase the durability of concrete.

Degradation Behaviour of Nanosilica Enhanced Oil Palm Empty Fruit Bunch Fiber Epoxy Composites

2020 ◽  
Vol 305 ◽  
pp. 28-35
Author(s):  
Anslem Wong Tsu An ◽  
Sujan Debnath ◽  
Vincent Lee Chieng Chen ◽  
Moola Mohan Reddy ◽  
Alokesh Pramanik
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Oil Palm ◽  
Environmental Conditions ◽  
Natural Fiber ◽  
Fiber Composites ◽  
Epoxy Composites ◽  
Empty Fruit Bunch ◽  
Degradation Behaviour ◽  
Brine Solution

In recent years, studies regarding natural fiber reinforced composites have been increased as they are biodegradable with good mechanical performance therefore can help to overcome the environmental issue. As the natural fibers are easy to obtain, many industries have started to make use of natural fiber composites which are light in weight and possess good mechanical properties. However, the natural fiber composites also possess certain limitations most importantly their high moisture absorption ability which makes them incompatible at degradable environment. The fiber constituents of natural fiber composite may have different type of interactions at different environmental conditions. In addition, the involvement of nanoparticles in the composite may be the solution to overcome the deficiencies. In this research, the degradation behaviour of Oil palm empty fruit bunch (OPEFB) fibers reinforced epoxy composites upon exposure to degradable environmental conditions and the effect of adding nanoparticles have been studied. The tensile tests were conducted before and after the exposure to different environmental conditions including plain water, moist soil, brine solution, and cooking oil. Results shows that the addition of 10wt% of OPEFB fiber to the epoxy composites had improved the mechanical tensile strength up to 15.97% and composites exposed to brine solution have the most prominent sign of degradation in mechanical properties in both composites with and without nanosilica. Nevertheless, the composites with nanosilica have shown up to 24.28% improvement in tensile strength after exposure to different environmental conditions. The improvement were attributed due to filling the voids of the composites with nanosilica and good interfacial adhesion between the nanofiller, fiber, and matrix.

Fabrication and Testing of Abaca Fibre Reinforced Epoxy Composites for Automotive Applications

2013 ◽  
Vol 718-720 ◽  
pp. 63-68 ◽  
Author(s):  
Raja R. Niranjan ◽  
S. Junaid Kokan ◽  
R. Sathya Narayanan ◽  
S. Rajesh ◽  
V.M. Manickavasagam ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Natural Fiber ◽  
Fibre Composite ◽  
Fiber Composite ◽  
Salt Water ◽  
Natural Fibers ◽  
Natural Fibre ◽  
Industrial Applications ◽  
Vertical Orientation ◽  
The Matrix

The natural fibre composite materials are nowadays playing a vital role in replacing the conventional and synthetic materials for industrial applications. This paper proposes a natural fiber composite made of Abaca fibre as reinforcing agent with Epoxy resin as the matrix, manufactured using Hand Lay-up method. Glass Fiber Reinforced Plastics (woven rovings) are used to improve the surface finish and impart more strength and stiffness to natural fibers. In this work, the fibers are arranged in alternative layers of abaca in horizontal and vertical orientation. The mechanical properties of the composite are determined by testing the samples for tensile and flexural strength. It is observed that the tensile strength of the composite material is dependent on the strength of the natural fiber and also on the interfacial adhesion between the reinforcement and the matrix. The composite is developed for automobile dashboard/mudguard application. It may also be extended to biomedical, electronics and sports goods manufacturing. It can also be used in marine products due to excellent resistance of abaca to salt water damage since the tensile strength when it is wet.

Sign in / Sign up

Export Citation Format

Share Document