Application of Metallographic Analysis Techniques for Detection and Identification of Spray Paint Defects

2017 ◽  
Vol 270 ◽  
pp. 118-123
Author(s):  
Michaela Remešová ◽  
Lenka Klakurková ◽  
Ivana Ročňáková ◽  
Ladislav Čelko ◽  
Lucie Páleníková ◽  
...  
Keyword(s):  
Substrate Material ◽  
Consumer Electronics ◽  
Metallographic Analysis ◽  
Surface Appearance ◽  
X Ray ◽  
Detection And Identification ◽  
Digital Microscope ◽  
Negative Effect ◽  
Paint Films

The paper is focused on the metallographic analysis of spray paint films with defects. The painting has two important roles. Firstly, it protects the substrate material (ferrous, nonferrous and plastic) and secondly, it improves the appearance of the surface. Appearance and quality of painting film play an important role in the industry (automotive, aerospace, consumer electronics, etc.). Defects of spray painting film, which have a negative effect on the appearance of the product, can be detected and further analysed by common methods used in metallography. Such methods are very effective tool for revealing the cause of defects and their elimination within the technological process (degreasing, cleaning, pickling, drying, technological discipline, etc.). In this paper, defects were characterized by high-resolution digital microscope (LM) and scanning electron microscope (SEM) equipped with energy dispersive X-ray analyser (EDX).

Failure Analysis of a Metallic Component Used in Hospital Cooling Equipment

2015 ◽  
Vol 638 ◽  
pp. 310-315
Author(s):  
George Coman ◽  
Sorin Ciuca ◽  
Mirela Sohaciu ◽  
Ecaterina Matei ◽  
Andra Predescu ◽  
...  
Keyword(s):  
Failure Analysis ◽  
Microstructural Analysis ◽  
Optical Emission ◽  
Emission Spectrometry ◽  
Metallographic Analysis ◽  
Metallic Component ◽  
Metallic Material ◽  
X Ray ◽  
Made In

The paper presents the investigations made on samples taken from the related rotor blade of an hospital cooling equipment.The failure analysis was made in order to find if the failure appear because the metallic material used or was functional problem.The objectives of our analysis and techniques used are described below:determining the chemical composition by optical emission spectrometry;determining the hardness of the material;metallographic analysis by optical microscopy;micro compositional and microstructural analysis by scanning electron microscopy (SEM) and by microanalysis, energy dispersive X-ray (EDAX). Research has highlighted the quality of piece elaboration and casting, which led to a long life of its use.

scholarly journals Analysis of the Quality of Sulfomolybdenum Coatings Obtained by Electrospark Alloying Methods

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6332
Author(s):  
Oksana P. Gaponova ◽  
Bogdan Antoszewski ◽  
Viacheslav B. Tarelnyk ◽  
Piotr Kurp ◽  
Oleksandr M. Myslyvchenko ◽  
...  
Keyword(s):  
Quality Parameters ◽  
Substrate Material ◽  
Metallographic Analysis ◽  
Electrospark Alloying ◽  
X Ray Diffraction ◽  
Surface Layers ◽  
Molybdenum Electrode ◽  
Tribological Coatings ◽  
Machine Parts

The authors of this paper have attempted to improve the quality of surface layers applied to steel elements of machine parts constituting friction couples. The main goal of the research was to investigate an electrospark alloying method process for obtaining abrasion-resistant tribological coatings containing molybdenum disulfide on a steel surface. A substance in the form of sulfur ointment with a sulfur content of 33.3% was applied on the surfaces of C22 and C40 steel specimens. In order to determine the influence of the energy parameters of ESA equipment on the quality parameters of coatings, the ESA process was carried out using a molybdenum electrode with discharge energies Wp = 0.13; Wp = 0.55; Wp = 3.4 J. The following tests were carried out on specimens with such coatings: metallographic analysis, microhardness tests, surface roughness, and local X-ray diffraction microanalysis. The experiments revealed that sulfomolybdenum coatings consist of four zones with different mechanical properties. Depending on the discharge energy and the substrate material, the hardness of these zones varies from approx. 1100 to over 10,000 MPa. Differences in the distribution of, among others, sulfur and molybdenum in the obtained coatings, as well as differences in the microstructure of the observed coatings, were observed.

Lithography below 100 nm

1983 ◽  
Vol 41 ◽  
pp. 96-99
Author(s):  
L. D. Jackel
Keyword(s):  
Spatial Distribution ◽  
Electron Beam ◽  
Electron Scattering ◽  
Electron Beam Lithography ◽  
Substrate Material ◽  
Local Electron ◽  
Electron Dose ◽  
Positive Resist ◽  
Exposure Process

Most production electron beam lithography systems can pattern minimum features a few tenths of a micron across. Linewidth in these systems is usually limited by the quality of the exposing beam and by electron scattering in the resist and substrate. By using a smaller spot along with exposure techniques that minimize scattering and its effects, laboratory e-beam lithography systems can now make features hundredths of a micron wide on standard substrate material. This talk will outline sane of these high- resolution e-beam lithography techniques.We first consider parameters of the exposure process that limit resolution in organic resists. For concreteness suppose that we have a “positive” resist in which exposing electrons break bonds in the resist molecules thus increasing the exposed resist's solubility in a developer. Ihe attainable resolution is obviously limited by the overall width of the exposing beam, but the spatial distribution of the beam intensity, the beam “profile” , also contributes to the resolution. Depending on the local electron dose, more or less resist bonds are broken resulting in slower or faster dissolution in the developer.

Vocation Education Quality from Demand Side’s Perspective: The Case of Transport Technology Universities in the North of Vietnam

2019 ◽  
Vol 10 (11) ◽  
pp. 1089-1097
Author(s):  
Nguyen Quynh Hoa ◽  
◽  
Phung Chu Hoang ◽  
Keyword(s):  
Vocational Training ◽  
Vocational Education And Training ◽  
Quality Outcomes ◽  
The North ◽  
Job Opportunities ◽  
Management Capacity ◽  
Negative Effect ◽  
Training Quality ◽  
And Training

Quality outcomes from vocational education and training (VET) are fundamental to ensuring a skilled workforce and supporting a productive economy. The quality of vocational training from the demand’s perspective is defined as meeting the customer specification, needs or requirements. Using the method of Exploratory Factor Analysis (EFA) and Multiple Regression Analysis to get the analytical results of 275 respondents as graduates of University of Transport and Communication, University of Transport Technology (the two universities training on transportation in the North of Vietnam), the results show that factors are measured by the observed variables in the study that ensure reliability and relevance. The descriptive statistics result of vocational training quality is 3.28, while all independent variables are at average level (between 3.1 to 3.48) with the highest value related to the quality of the teacher and the lowest are facilities and training programs and management capacity of university. However, the regression results show that the qualification of the teacher, material facilities and training program, management capacity and job opportunities at the training school do not affect the quality of the training while “Learners-NH” have a great positive effect and the labor market information has a negative effect on the training quality of the school significantly. Base on those data, some policy recommendations have been given out in order to improve the training quality of transport technology universities in the north of Vietnam in particular and the vocational training quality of Vietnam in general.

The Impact of Competitive Quasi-Market on Service Delivery in Benue State University, Makurdi Nigeria

GIS Business ◽  
2019 ◽  
Vol 14 (4) ◽  
pp. 85-98
Author(s):  
Idoko Peter
Keyword(s):  
Service Delivery ◽  
A Priori ◽  
Least Square ◽  
Secondary Source ◽  
State University ◽  
Ordinary Least Square ◽  
Negative Effect ◽  
The Impact ◽  
The Relationship

This research the impact of competitive quasi market on service delivery in Benue State University, Makurdi Nigeria. Both primary and secondary source of data and information were used for the study and questionnaire was used to extract information from the purposively selected respondents. The population for this study is one hundred and seventy three (173) administrative staff of Benue State University selected at random. The statistical tools employed was the classical ordinary least square (OLS) and the probability value of the estimates was used to tests hypotheses of the study. The result of the study indicates that a positive relationship exist between Competitive quasi marketing in Benue State University, Makurdi Nigeria (CQM) and Transparency in the service delivery (TRSP) and the relationship is statistically significant (p<0.05). Competitive quasi marketing (CQM) has a negative effect on Observe Competence in Benue State University, Makurdi Nigeria (OBCP) and the relationship is not statistically significant (p>0.05). Competitive quasi marketing (CQM) has a positive effect on Innovation in Benue State University, Makurdi Nigeria (INVO) and the relationship is statistically significant (p<0.05) and in line with a priori expectation. This means that a unit increases in Competitive quasi marketing (CQM) will result to a corresponding increase in innovation in Benue State University, Makurdi Nigeria (INVO) by a margin of 22.5%. It was concluded that government monopoly in the provision of certain types of services has greatly affected the quality of service experience in the institution. It was recommended among others that the stakeholders in the market has to be transparent so that the system will be productive to serve the society effectively

X-ray fluorescence determination of zinc sulfate in acidic zinc plating electrolyte

2020 ◽  
Vol 86 (10) ◽  
pp. 18-22
Author(s):  
K. N. Vdovin ◽  
K. G. Pivovarova ◽  
N. A. Feoktistov ◽  
T. B. Ponamareva
Keyword(s):  
Zinc Sulfate ◽  
Zinc Coating ◽  
Electrolyte Composition ◽  
Complexometric Titration ◽  
X Ray ◽  
Fluorescence Determination ◽  
Zinc Plating ◽  
Zinc Determination

Zinc sulfate is the main component in the composition of the acidic zinc plating electrolyte. Deviation in the electrolyte composition from the optimum content leads to destabilization of the electrolysis process and deteriorate the quality of the resulting zinc coating. The proper quality of a zinc coating obtained by galvanic deposition can be ensured only with timely monitoring and adjustment of the electrolyte composition. A technique of X-ray fluorescence determination of zinc (in terms of zinc sulfate) in an acidic zinc plating electrolyte is proposed. The study was carried out using an ARL Quant’X energy dispersive spectrometer (Thermo Fisher Scientific, USA) with a semiconductor silicon-lithium detector. The features of the spectrometer design are presented. The optimal parameters of excitation and detection of zinc radiation were specified when the electrolyte sample was diluted 1:1000. The ZnKα1 line was used as an analytical line. The plotted calibration graph is linear, the correlation coefficient being 0.999234. The results of zinc determination according to the developed method were compared with the data of the reference method of complexometric titration to prove the reliability of the procedure. The results are characterized by good convergence and accuracy. The proposed method of X-ray fluorescence zinc determination in a zinc plating electrolyte equals complexometric titration in the limiting capabilities and even exceeds the latter in terms of the simplicity of sample preparation and rapidity. The developed method of X-ray fluorescence determination of zinc is implemented in analysis of the electrolyte used in the continuous galvanizing unit at «METSERVIS LLC».

INFLUENCE OF DICARBOXYLIC ACIDS ON SOWING QUALITY OF SPRING BARLEY

1970 ◽  
pp. 22-25
Author(s):  
N. N. Loy ◽  
S. N. Gulina
Keyword(s):  
Organic Acids ◽  
Spring Barley ◽  
Dose Range ◽  
Dicarboxylic Acids ◽  
Rotary Machine ◽  
Working Solution ◽  
Negative Effect ◽  
Sprouted Seeds

The effect of presowing seed treatment on various concentrations of dicarboxylic (organic) acids on the sowing characteristics of spring barley has been studied. Seeds were treated with organic acids obtained by exposing cuttings to the radiation with a dose of 100 kGy and consequent hydrolysis, in concentrations: 1•10-7 %; 1•10-9; 1•10-11; 1•10-13 and 1•10-15 % on a laboratory rotary machine RVO-64 for one day before laying for germination. Distilled water was used for the control case. The rate of application of the working solution calculated as 10 liters / ton of seeds. Seeds were germinated in filter paper rolls in accordance with GOST 12038-84 requirements. The temperature was maintained at +24 ° C in the thermostat where the glasses with rolls were placed. For determination of germinative power and laboratory germination the sprouted seeds were evaluated after three and seven days, respectively. In laboratory experiments it was established that the treatment of barley seeds of varieties Zazersky 85, Nur and Vladimir with organic acids (OK) in different concentrations had both a stimulating and a negative effect. On the Zazersky 85 variety, in variants with acid concentrations of 1•10-9 and 1•10-11, an increase in germination energy (EP) by 2-4% and a significant decrease (by 3-4%) of laboratory germination (LV) of barley seeds were noted. On the Nur variety, the increase in EP was observed at 4% (concentration 1•10-11), LV and seed growth force (CPC) by 2-7% at a concentration of 1•10-7 and in the dose range 1•10-11 - 1•10-14 compared to the control values. On the grade of Vladimir, an increase in EP, LV, and CPC was found to increase by 1-6% at concentrations OK 1•10-7 and 1•10-13. It was shown that the treatment of seeds with acids led to an increase in the length of the germ in all studied varieties (by 3-9%) and dry biomass of 7-day-old seedlings - by 3-6%. Consequently, the treatment of seeds with a mixture of dicarboxylic acids has a stimulating effect on the sowing quality of spring barley.

Counterfeit Parts Recognition and Detection for Failure Analysts

2010 ◽  
Author(s):  
Katherine V. Whittington
Keyword(s):  
Thermal Cycle ◽  
Visual Inspection ◽  
Acoustic Microscopy ◽  
Scanning Acoustic Microscopy ◽  
3D Measurement ◽  
X Ray ◽  
Wide Range ◽  
Electronic Parts ◽  
Testing Awareness

Abstract The electronics supply chain is being increasingly infiltrated by non-authentic, counterfeit electronic parts, whose use poses a great risk to the integrity and quality of critical hardware. There is a wide range of counterfeit parts such as leads and body molds. The failure analyst has many tools that can be used to investigate counterfeit parts. The key is to follow an investigative path that makes sense for each scenario. External visual inspection is called for whenever the source of supply is questionable. Other methods include use of solvents, 3D measurement, X-ray fluorescence, C-mode scanning acoustic microscopy, thermal cycle testing, burn-in technique, and electrical testing. Awareness, vigilance, and effective investigations are the best defense against the threat of counterfeit parts.

Beech sapling architecture following small and medium gap disturbances in silver fir-beech old-growth forests in Slovenia

2005 ◽  
Vol 156 (12) ◽  
pp. 481-486 ◽  
Author(s):  
Jurij Diaci ◽  
Lahorka Kozjek
Keyword(s):  
Light Intensity ◽  
Quality Characteristics ◽  
Stem Length ◽  
Silver Fir ◽  
Beech Forests ◽  
Vertical Growth ◽  
Relative Light Intensity ◽  
Stem Bending ◽  
Negative Effect

The objective of our research was to examine the effect of canopy shading on beech sapling architecture in the oldgrowth silver fir-beech forests of Pecka and Rajhenavski Rog. In August 2003 we sampled one plot (352 m2) in a large gap in Pecka, which was a result of a strong windstorm in 1983, and eight small gaps (26–78 m2) with similar sapling heights (3.8–8 m). A ground view of each gap was drawn including the characteristics of gap border trees and the density of separate sapling layers was recorded. The height and diameter were measured for each sapling, as well as the following quality characteristics on selected dominant saplings: width of the crown,number of larger branches and knots (&gt;1/3 DBH), intensity of stem bending, deviation from vertical growth, number of terminal shoots, and the type of damage. The results show a negative effect of high canopy shading (estimated relative light intensity was below 5%) on the architectural quality of saplings. A lower overall density of saplings, greater intensity of bending and deviation from vertical growth, a shorter stem length without branches, a larger number of saplings with two terminal shoots, and a larger number of damaged saplings were observed in small gaps.

OSTEOPOROSIS AND RISK FACTORS IN THE PATIENTS ON CHRONIC HEMODIALYSIS

2015 ◽  
pp. 50-58
Author(s):  
Thi Dung Nguyen ◽  
Tam Vo
Keyword(s):  
Quality Of Life ◽  
Risk Factors ◽  
Bone Density ◽  
Region Of Interest ◽  
Cross Sectional Study ◽  
Chronic Hemodialysis ◽  
Cross Sectional ◽  
X Ray ◽  
Density Reduction

Background: The patients on hemodialysis have a significantly decreased quality of life. One of many problems which reduce the quality of life and increase the mortality in these patients is osteoporosis and osteoporosis associated fractures. Objectives: To assess the bone density of those on hemodialysis by dual energy X ray absorptiometry and to examine the risk factors of bone density reduction in these patients. Patients and Method: This is a cross-sectional study, including 93 patients on chronic hemodialysis at the department of Hemodialysis at Cho Ray Hospital. Results: Mean bone densities at the region of interest (ROI) neck, trochanter, Ward triangle, intertrochanter and total neck are 0.603 ± 0.105; 0.583 ± 0.121; 0.811 ± 0.166; 0.489 ± 0.146; 0.723 ± 0.138 g/cm2 respectively. The prevalences of osteoporosis at those ROI are 39.8%, 15.1%; 28%; 38.7%; and 26.9% respectively. The prevalences of osteopenia at those ROI are 54.8%; 46.3%; 60.2%; 45.2% and 62.7% respectively. The prevalence of osteopososis in at least one ROI is 52.7% and the prevalence of osteopenia in at least one ROI is 47.3%. There are relations between the bone density at the neck and the gender of the patient and the albuminemia. Bone density at the trochanter is influenced by gender, albuminemia, calcemia and phosphoremia. Bone density at the intertrochanter is affected by the gender. Bone density at the Ward triangle is influenced by age and albuminemia. Total neck bone density is influenced by gender, albuminemia and phosphoremia. Conclusion: Osteoporosis in patients on chronic hemodialysis is an issue that requires our attention. There are many interventionable risk factors of bone density decrease in these patients. Key words: Osteoporosis, DEXA, chronic renal failure, chronic hemodialysis

Sign in / Sign up

Export Citation Format

Share Document