scholarly journals Experimental assessment on preparation of biodegradable polythylene/polylatic acid-chithosan composite from renewable resources

2021 ◽  
Vol 14 (1) ◽  
pp. 45-53
Author(s):  
B.U. Gumel ◽  
S.M. Gumel ◽  
A.A. Bawa ◽  
A.S. Auwal
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Polylactic Acid ◽  
Renewable Resources ◽  
Enzymatic Degradation ◽  
Renewable Resource ◽  
Natural Polymers ◽  
Homogeneous Surface ◽  
Elongation At Break ◽  
Potato Waste

Due to poor degradability and contamination risk of synthetic plastics, utilization of renewable resources is encouraged. Biobased thermoplastic polymers from renewable resource that is inexpensive, biodegradable, compostable and renewably non-toxic, is focused. In this paper mixtures of synthetic and natural polymers were used as a potential option to reduce pollution by plastic waste. The study is aimed at assessing utilization of sweet potato waste as a source of bioplastic for package application, the polymer was modified with a biopolymer chitosan to obtain polylactic acid-chitosan plastic. The developed polymer matrix was blended with polyethylene to obtain biodegradable packaging material. The bioplastic was characterized using Fourier Transformed Infra-Red Spectroscopy (FTIR) and scaning electron microscope (SEM). Physical and mechanical properties of the composites were evaluated by measuring enzymatic degradation, tensile strength, and elongation at break. The results have shown that the film obtained have homogeneous surface by (SEM). Mechanical properties of the bio plastics revealed that tensile strength increases with increases in the concentration of chitosan and hence, the elongation at break decreases with increase in chitosan content. While the fastest enzymatic degradation was observed to have high microbial growth on the bio plastics with high content of Chitosan-Polylactic acid.

scholarly journals Characteristics of Self-Healable Copolymers of Styrene and Eugenol Terminated Polyurethane Prepolymer

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1674 ◽  
Author(s):  
Jing-Yu Liang ◽  
Se-Ra Shin ◽  
Soo-Hyoung Lee ◽  
Dai-Soo Lee
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Fossil Fuel ◽  
Renewable Resource ◽  
Self Healing ◽  
Elongation At Break ◽  
Good Thermal Stability ◽  
Healing Property ◽  
Polyurethane Prepolymer ◽  
Reversible Nature

With limited biomass that can be currently utilized as a renewable resource, it is important to develop a method to convert biomass into materials that can replace fossil fuel product. In this paper, eugenol, a bio-based allyl chain-substituted guaiacol, was used to synthesize self-healable copolymers. Eugenol terminated polyurethane prepolymer (ETPU) was synthesized from eugenol and polyurethane prepolymers terminated with isocyanate groups. ETPU contained two allyl groups. Self-healing copolymer networks were obtained by copolymerization of ETPU and styrene monomer via free radical polymerization. Effects of ETPU content on the properties of copolymers were then studied. These copolymers containing ETPU exhibited good thermal stability and mechanical properties. These copolymers showed higher tensile strength and elongation at break than PS. Their maximum tensile strength reached 19 MPa. In addition, these copolymers showed self-healing property at elevated temperature due to the reversible nature of urethane units in ETPU.

In Situ Synthesis and Mechanical Properties of Polylactic Acid/Hydroxyapatite Functionalized Graphene Nanocomposite

2017 ◽  
Vol 735 ◽  
pp. 230-234
Author(s):  
Aekkapan Sriboonrung ◽  
Siree Tangbunsuk ◽  
Chomdao Sinthuvanich ◽  
Wirunya Keawwattana
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Polylactic Acid ◽  
Tensile Modulus ◽  
Precipitation Method ◽  
Functionalized Graphene ◽  
X Ray Diffraction ◽  
Elongation At Break ◽  
Graphene Nanocomposite

The hydroxyapatite functionalized graphene (HAp-GnP) was prepared by precipitation method. It was characterized by Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). Polylactic acid (PLA)/HAp-GnP and PLA/HAp-GnP composites were prepared in film by solution casting. The amount of HAp-GnP and HAp/GnP filled in PLA was fixed at 5% (by weight). The influence of HAp-GnP in the mechanical properties including tensile strength (TS), tensile modulus (E) and elongation at break (EB) of composites was investigated. It was found that tensile strength (TS) and tensile modulus (E) of the PLA/HAp-GnP composite were higher than those of PLA/HAp/GnP composite as a result of HAp making the interfacing with graphene leading to the greater distribution of HAp-GnP in PLA matrix. The PLA/HAp-GnP composite is applicable to be applied as bone substitute in the future.

Biocomposites from Cassava Pulp/Polylactic Acid/Poly(butylene Succinate)

2013 ◽  
Vol 747 ◽  
pp. 367-370 ◽  
Author(s):  
Parina Kangwanwatthanasiri ◽  
Nitinat Suppakarn ◽  
Chaiwat Ruksakulpiwat ◽  
Ruksakulpiwat Yupaporn
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Polylactic Acid ◽  
Glycidyl Methacrylate ◽  
Interfacial Adhesion ◽  
Butylene Succinate ◽  
Elongation At Break ◽  
Cassava Pulp ◽  
Polybutylene Succinate ◽  
Internal Mixer

In this study, effect of PBS content on physical properties of polylactic acid (PLA) and polybutylene succinate (PBS) blends was studied. The content of PBS was varied from 0 30 %wt. The blends were mixed using an internal mixer. The samples were prepared using a compression molding. It was shown that tensile strength and Youngs modulus of PLA/PBS blends were decreased with increasing PBS content from to 0 30 %wt. Nevertheless, elongation at break and impact strength of the blend were increased with increasing the amount of PBS up to 20 %wt. Polylactic acid grafted glycidyl methacrylate (PLA-g-GMA) was used as the compatibilizer in PLA/PBS/PLA-g-GMA blends. PLA-g-GMA was shown to improve interfacial adhesion between PLA and PBS. With the addition of PLA-g-GMA, mechanical properties of PLA/PBS blend were improved. The preparation of cassava pulp (CP) to be used as filler in PLA/PBS blends and PLA/PBS/PLA-g-GMA blends was studied. Effect of CP content on mechanical properties CP/PLA/PBS composites was studied. PLA-g-GMA was also used as compatibilizer in CP/PLA/PBS composites. The mechanical properties of CP/PLA/PBS composites were improved with the addition of PLA-g-GMA as well.

Nanoarchitectonics Composites of Thermoplastic Starch and Montmorillonite Modified with Low Molecular Weight Polylactic Acid

2020 ◽  
Vol 20 (5) ◽  
pp. 2955-2963
Author(s):  
Peixian Li ◽  
Huimin Guo ◽  
Kaixiong Yang ◽  
Xiaoyan Yu ◽  
Xiongwei Qu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
Tensile Strength ◽  
Polylactic Acid ◽  
Composite Films ◽  
Thermoplastic Starch ◽  
Nanocomposite Films ◽  
Low Molecular Weight ◽  
Elongation At Break ◽  
Starch Films

Nano montmorillonite (MMT) was modified by low molecular weight polylactic acid (PLA), then, the PLA modified MMT and raw MMT were added into thermoplastic starch (TPS) to prepare biodegradable nanocomposite films, respectively. For both nanocomposite films with raw MMT and modified MMT, the Tmax of degradation was enhanced and the mechanical properties were improved. The composite films containing 4 wt.% MMT displayed tensile strength of 5.06 MPa, approximately 1.4 times of that for the pure TPS films. The tensile strength of composite films containing 4 wt.% modified MMT is 6.74 MPa approximately 2 times of those for pure starch films. On the other hand, the composite film containing 4 wt.% modified MMT displayed elongation at break as high as 34.25%, which is 1.3 times of that of the pure starch film, while the composite films containing raw MMT had reduced elongation at break. This study showed that the MMT modified with PLA could significantly enhance the mechanical properties of TPS, and provides a new method to prepare fully biodegradable starch-based nanocomposites.

Influence of Natural Oil Polyol on Mechanical Properties of Polylactic Acid

2017 ◽  
Vol 866 ◽  
pp. 208-211 ◽  
Author(s):  
Kantima Chaochanchaikul
Keyword(s):  
Mechanical Properties ◽  
Differential Scanning Calorimetry ◽  
Tensile Strength ◽  
Polylactic Acid ◽  
Castor Oil ◽  
Oil Content ◽  
Scanning Calorimetry ◽  
Elongation At Break ◽  
Natural Oil ◽  
Oil Blend

The aim of this work was to improve the mechanical properties of polylactic acid (PLA) by natural oil polyol. Castor oil is natural oil polyol used for this work. It was directly extracted from castor seed and without chemical modification. The contents of castor oil were varied from 0 to 10 wt%. The effect of castor oil content on mechanical properties of PLA were evaluated by tensile and impact testings. Differential scanning calorimetry (DSC) and morphology analysis were used for explanation of the result. The result showed that the elongation at break and impact strength of PLA /10 wt% castor oil blend were increased about 108 and 30 % as comparing neat PLA whereas tensile strength tended to decrease about 24 %. The changes in glass transition temperature, crystallinity content and morphology of PLA corresponded well with the result of mechanical properties.

scholarly journals The Structure and Mechanical Properties of Hemp Fibers-Reinforced Poly(ε-Caprolactone) Composites Modified by Electron Beam Irradiation

2021 ◽  
Vol 11 (12) ◽  
pp. 5317
Author(s):  
Rafał Malinowski ◽  
Aneta Raszkowska-Kaczor ◽  
Krzysztof Moraczewski ◽  
Wojciech Głuszewski ◽  
Volodymyr Krasinskyi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Electron Beam ◽  
Impact Strength ◽  
Flexural Modulus ◽  
Natural Fibers ◽  
High Energy ◽  
Electron Radiation ◽  
Elongation At Break ◽  
Hemp Fibers

The need for the development of new biodegradable materials and modification of the properties the current ones possess has essentially increased in recent years. The aim of this study was the comparison of changes occurring in poly(ε-caprolactone) (PCL) due to its modification by high-energy electron beam derived from a linear electron accelerator, as well as the addition of natural fibers in the form of cut hemp fibers. Changes to the fibers structure in the obtained composites and the geometrical surface structure of sample fractures with the use of scanning electron microscopy were investigated. Moreover, the mechanical properties were examined, including tensile strength, elongation at break, flexural modulus and impact strength of the modified PCL. It was found that PCL, modified with hemp fibers and/or electron radiation, exhibited enhanced flexural modulus but the elongation at break and impact strength decreased. Depending on the electron radiation dose and the hemp fibers content, tensile strength decreased or increased. It was also found that hemp fibers caused greater changes to the mechanical properties of PCL than electron radiation. The prepared composites exhibited uniform distribution of the dispersed phase in the polymer matrix and adequate adhesion at the interface between the two components.

scholarly journals Effect of Moisture Content on the Processing and Mechanical Properties of a Biodegradable Polyester

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1616
Author(s):  
Vincenzo Titone ◽  
Antonio Correnti ◽  
Francesco Paolo La Mantia
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Moisture Content ◽  
Mechanical Testing ◽  
Hydrolytic Degradation ◽  
Slight Reduction ◽  
Biodegradable Polyester ◽  
Molding Process ◽  
Elongation At Break ◽  
Effect Of Moisture

This work is focused on the influence of moisture content on the processing and mechanical properties of a biodegradable polyester used for applications in injection molding. The pellets of the biodegradable polyester were exposed under different relative humidity conditions at a constant temperature before being compression molded. The compression-molded specimens were again placed under the above conditions before the mechanical testing. With all these samples, it is possible to determine the effect of moisture content on the processing and mechanical properties separately, as well as the combined effect of moisture content on the mechanical properties. The results obtained showed that the amount of absorbed water—both before processing and before mechanical testing—causes an increase in elongation at break and a slight reduction of the elastic modulus and tensile strength. These changes have been associated with possible hydrolytic degradation during the compression molding process and, in particular, with the plasticizing action of the moisture absorbed by the specimens.

Effect of Castor Oil Impregnation on the Physical and Mechanical Properties of Bacterial Cellulose

2012 ◽  
Vol 3 (1) ◽  
pp. 13-26
Author(s):  
Myrtha Karina ◽  
Lucia Indrarti ◽  
Rike Yudianti ◽  
Indriyati
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Bacterial Cellulose ◽  
Young’S Modulus ◽  
Castor Oil ◽  
Young's Modulus ◽  
Physical And Mechanical Properties ◽  
Scanning Electron Micrographs ◽  
Elongation At Break ◽  
Acetone Water

The effect of castor oil on the physical and mechanical properties of bacterial cellulose is described. Bacterial cellulose (BC) was impregnated with 0.5–2% (w/v) castor oil (CO) in acetone–water, providing BCCO films. Scanning electron micrographs revealed that the castor oil penetrated the pores of the bacterial cellulose, resulting in a smoother morphology and enhanced hydrophilicity. Castor oil caused a slight change in crystallinity indices and resulted in reduced tensile strength and Young's modulus but increased elongation at break. A significant reduction in tensile strength and Young's modulus was achieved in BCCO films with 2% castor oil, and there was an improvement in elongation at break and hydrophilicity. Impregnation with castor oil, a biodegradable and safe plasticiser, resulted in less rigid and more ductile composites.

Graphite/Bio-Based Epoxy Composites: The Mechanical Properties Interface

2015 ◽  
Vol 799-800 ◽  
pp. 115-119 ◽  
Author(s):  
Anika Zafiah M. Rus ◽  
Nur Munirah Abdullah ◽  
M.F.L. Abdullah ◽  
M. Izzul Faiz Idris
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Elastic Modulus ◽  
Filler Content ◽  
Weight Percent ◽  
Epoxy Composites ◽  
Elongation At Break ◽  
Graphite Content ◽  
Dispersion Condition ◽  
Strong Interfacial Bonding

Graphite reinforced bio-based epoxy composites with different particulate fractions of graphite were investigated for mechanical properties such as tensile strength, elastic modulus and elongation at break. The graphite content was varied from 5 wt.%, 10 wt.%, 15 wt.%, 20 wt.%, 25 wt.%, 30 wt.% by weight percent in the composites. The results showed that the mechanical properties of the composites mainly depend on dispersion condition of the treated graphite filler, aggregate structure and strong interfacial bonding between treated graphite in the bio-based epoxy matrix. The composites showed improved tensile strength and elastic modulus with increase treated graphite weight loading. This also revealed the composites with increasing filler content was decreasing the elongation at break.

scholarly journals Fabrication and Characterization of Electrospun Polycaprolactone Blended with Chitosan-Gelatin Complex Nanofibrous Mats

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Yongfang Qian ◽  
Zhen Zhang ◽  
Laijiu Zheng ◽  
Ruoyuan Song ◽  
Yuping Zhao
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Weight Ratio ◽  
Degree Of Crystallinity ◽  
X Ray Diffraction ◽  
Tissue Engineering Scaffolds ◽  
Elongation At Break ◽  
Nanofibrous Scaffolds ◽  
Two Peaks

Design and fabrication of nanofibrous scaffolds should mimic the native extracellular matrix. This study is aimed at investigating electrospinning of polycaprolactone (PCL) blended with chitosan-gelatin complex. The morphologies were observed from scanning electron microscope. As-spun blended mats had thinner fibers than pure PCL. X-ray diffraction was used to analyze the degree of crystallinity. The intensity at two peaks at 2θof 21° and 23.5° gradually decreased with the percentage of chitosan-gelatin complex increasing. Moreover, incorporation of the complex could obviously improve the hydrophilicity of as-spun blended mats. Mechanical properties of as-spun nanofibrous mats were also tested. The elongation at break of fibrous mats increased with the PCL content increasing and the ultimate tensile strength varied with different weight ratios. The as-spun mats had higher tensile strength when the weight ratio of PCL to CS-Gel was 75/25 compared to pure PCL. Both as-spun PCL scaffolds and PCL/CS-Gel scaffolds supported the proliferation of porcine iliac endothelial cells, and PCL/CS-Gel had better cell viability than pure PCL. Therefore, electrospun PCL/Chitosan-gelatin nanofibrous mats with weight ratio of 75/25 have better hydrophilicity mechanical properties, and cell proliferation and thus would be a promising candidate for tissue engineering scaffolds.

Sign in / Sign up

Export Citation Format

Share Document