Influence of Natural Oil Polyol on Mechanical Properties of Polylactic Acid

2017 ◽  
Vol 866 ◽  
pp. 208-211 ◽  
Author(s):  
Kantima Chaochanchaikul
Keyword(s):  
Mechanical Properties ◽  
Differential Scanning Calorimetry ◽  
Tensile Strength ◽  
Polylactic Acid ◽  
Castor Oil ◽  
Oil Content ◽  
Scanning Calorimetry ◽  
Elongation At Break ◽  
Natural Oil ◽  
Oil Blend

The aim of this work was to improve the mechanical properties of polylactic acid (PLA) by natural oil polyol. Castor oil is natural oil polyol used for this work. It was directly extracted from castor seed and without chemical modification. The contents of castor oil were varied from 0 to 10 wt%. The effect of castor oil content on mechanical properties of PLA were evaluated by tensile and impact testings. Differential scanning calorimetry (DSC) and morphology analysis were used for explanation of the result. The result showed that the elongation at break and impact strength of PLA /10 wt% castor oil blend were increased about 108 and 30 % as comparing neat PLA whereas tensile strength tended to decrease about 24 %. The changes in glass transition temperature, crystallinity content and morphology of PLA corresponded well with the result of mechanical properties.

Effect of Castor Oil Impregnation on the Physical and Mechanical Properties of Bacterial Cellulose

2012 ◽  
Vol 3 (1) ◽  
pp. 13-26
Author(s):  
Myrtha Karina ◽  
Lucia Indrarti ◽  
Rike Yudianti ◽  
Indriyati
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Bacterial Cellulose ◽  
Young’S Modulus ◽  
Castor Oil ◽  
Young's Modulus ◽  
Physical And Mechanical Properties ◽  
Scanning Electron Micrographs ◽  
Elongation At Break ◽  
Acetone Water

The effect of castor oil on the physical and mechanical properties of bacterial cellulose is described. Bacterial cellulose (BC) was impregnated with 0.5–2% (w/v) castor oil (CO) in acetone–water, providing BCCO films. Scanning electron micrographs revealed that the castor oil penetrated the pores of the bacterial cellulose, resulting in a smoother morphology and enhanced hydrophilicity. Castor oil caused a slight change in crystallinity indices and resulted in reduced tensile strength and Young's modulus but increased elongation at break. A significant reduction in tensile strength and Young's modulus was achieved in BCCO films with 2% castor oil, and there was an improvement in elongation at break and hydrophilicity. Impregnation with castor oil, a biodegradable and safe plasticiser, resulted in less rigid and more ductile composites.

scholarly journals Combined Effects of Cellulose Nanofiber Nucleation and Maleated Polylactic Acid Compatibilization on the Crystallization Kinetic and Mechanical Properties of Polylactic Acid Nanocomposite

Polymers ◽  
2021 ◽  
Vol 13 (19) ◽  
pp. 3226
Author(s):  
Siti Shazra Shazleen ◽  
Lawrence Yee Foong Ng ◽  
Nor Azowa Ibrahim ◽  
Mohd Ali Hassan ◽  
Hidayah Ariffin
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Polylactic Acid ◽  
Crystallization Kinetics ◽  
Crystallization Kinetic ◽  
Crystallization Rate ◽  
Combined Effects ◽  
Dsc Analysis ◽  
Scanning Calorimetry ◽  
Isothermal Crystallization Kinetics

This work investigated the combined effects of CNF nucleation (3 wt.%) and PLA-g-MA compatibilization at different loadings (1–4 wt.%) on the crystallization kinetics and mechanical properties of polylactic acid (PLA). A crystallization kinetics study was done through isothermal and non-isothermal crystallization kinetics using differential scanning calorimetry (DSC) analysis. It was shown that PLA-g-MA had some effect on nucleation as exhibited by the value of crystallization half time and crystallization rate of the PLA/PLA-g-MA, which were increased by 180% and 172%, respectively, as compared to neat PLA when isothermally melt crystallized at 100 °C. Nevertheless, the presence of PLA-g-MA in PLA/PLA-g-MA/CNF3 nanocomposites did not improve the crystallization rate compared to that of uncompatibilized PLA/CNF3. Tensile strength was reduced with the increased amount of PLA-g-MA. Contrarily, Young’s modulus values showed drastic increment compared to the neat PLA, showing that the addition of the PLA-g-MA contributed to the rigidity of the PLA nanocomposites. Overall, it can be concluded that PLA/CNF nanocomposite has good performance, whereby the addition of PLA-g-MA in PLA/CNF may not be necessary for improving both the crystallization kinetics and tensile strength. The addition of PLA-g-MA may be needed to produce rigid nanocomposites; nevertheless, in this case, the crystallization rate of the material needs to be compromised.

scholarly journals PREPARATION AND CHARACTERIZATIONS OF LATEX/FILLER NANOCOMPOSITES

2020 ◽  
Vol 21 (2) ◽  
pp. 230-238
Author(s):  
Mohamad Firdaus Omar ◽  
NURIAH MOHAMAD ◽  
Fathilah Ali
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Coupling Agent ◽  
Morphological Properties ◽  
Rubber Matrix ◽  
Silane Coupling Agents ◽  
Scanning Calorimetry ◽  
Elongation At Break ◽  
Silane Coupling ◽  
Latex Compounding

Latex compounding which incorporates various types of clays as filler to the rubber can significantly give reinforcement in the rubber matrix when rubber/clay nanocomposites are formed, but the filler agglomerates. Thus, study was conducted by using Kaolin clay as the filler in the rubber nanocomposites with silane coupling agent to functionalize the surface of the filler. This study was done in order to investigate the mechanical properties of various functionalized Kaolin in latex nanocomposites, to prepare various ratios of Kaolin to rubber, and to characterize mechanical, thermal and morphological properties of the Kaolin in latex nanocomposites. To achieve these, six types of silane coupling agents was used for Kaolin filler surface functionalization purpose during the filler’s incorporation in latex compounding. The optimized coupling agent, USi-7301 (?-chloropropyltrimetoxysilane) – with tensile strength value of 32.77 MPa, elongation at break value of 632.589 % and force at break value of 6.737 N – was used to further functionalize Kaolin filler in different ratios so as to achieve the optimum mechanical, thermal and morphological properties of the filler in the polymer matrix. Universal tensile machine was used to analyze the mechanical properties of the nanocomposites, while the Scanning Electron Microscopy (SEM) and Differential Scanning Calorimetry (DSC) were used to observe the morphological and thermal properties of the nanocomposites, respectively. The results showed that reducing the Total Solids Content (TSC) of Kaolin filler to 26 % somehow showed the optimized properties of the nanocomposites, giving 34.00 MPa tensile strength, 576.494 % elongation at break and 6.564 N force at break. Rough surface morphology was observed under SEM suggesting the occurrence of phase separation between the hydrophilic filler and the hydrophobic rubber matrix. In the DSC plot, sample with USi-7301 and with functionalized Kaolin filler 26 % TSC showed glass transition temperature shifted to lower region compared to normal nitrile rubber. The reinforcement of nanocomposites formed will not only enhance the properties of the nanocomposites, but is also economically feasible thus brings advantages to the industry. ABSTRAK: Penyebatian lateks yang menggabungkan pelbagai jenis tanah liat sebagai pengisi dalam getah dapat memberi pengukuhan dalam matriks getah dengan ketara apabila nanokomposit getah / tanah liat terbentuk, tetapi pengisi mengagregat. Oleh itu, kajian dijalankan dengan menggunakan tanah liat Kaolin sebagai pengisi dalam nanokomposit getah dengan ejen gandingan silan untuk menambah-fungsi permukaan pengisi tersebut. Kajian ini dilakukan untuk mengenalpasti sifat mekanik pelbagai Kaolin (yang berfungsi) dalam nanokomposit lateks, untuk menyediakan pelbagai nisbah Kaolin terhadap getah, dan untuk mencirikan sifat mekanik, haba dan morfologi Kaolin dalam nanokomposit lateks. Untuk mencapainya, enam jenis ejen gandingan silan digunakan untuk tujuan menambah-fungsi permukaan pengisi Kaolin semasa penggabungan pengisi dalam penyebatian lateks. Ejen gandingan silan yang paling optimum, USi-7301 (?-silan kloropropiltrimetoksi) - dengan nilai kekuatan tegangan 32.77 MPa, nilai pemanjangan ketika pemutusan 632.589% dan kekuatan daya ketika pemutusan 6.737 N - digunakan dengan lebih lanjut untuk menambah-fungsi pengisi Kaolin dalam nisbah yang berbeza untuk lebih mencapai sifat mekanikal, haba dan morfologi optimum pengisi dalam matriks polimer lateks. Mesin tegangan universal digunakan untuk menganalisis sifat mekanik nanokomposit, sementara Mikroskopi Elektron Pengimbasan (SEM) dan Kalorimetri Pengimbasan Berbeza (DSC) digunakan untuk menganalisa sifat morfologi dan haba nanokomposit tersebut. Hasil kajian menunjukkan bahawa pengurangan Jumlah Kandungan Pepejal (TSC) pengisi Kaolin kepada 26% menunjukkan sifat optimum nanokomposit, dengan kekuatan tegangan 34.00 MPa, pemanjangan ketika pemutusan sebanyak 576.494% dan daya ketika pemutusan sebanyak 6.564 N. Morfologi permukaan kasar diperhatikan di bawah SEM dan ia menunjukkan berlakunya pemisahan fasa antara pengisi hidrofilik dan matriks getah hidrofobik. Dalam plot DSC, sampel dengan USi-7301 dan dengan pengisi Kaolin yang difungsikan dengan 26% TSC menunjukkan suhu peralihan kaca beralih ke kawasan yang lebih rendah berbanding getah nitril biasa. Pengukuhan nanokomposit yang terbentuk bukan sahaja akan meningkatkan sifat nanokomposit, tetapi juga dapat dilaksanakan secara ekonomi sehingga memberi banyak kelebihan kepada industri.

Influence of PNA012 on Crystallization and Mechanical Properties of Polybutylene Terephthalate

2012 ◽  
Vol 624 ◽  
pp. 264-268 ◽  
Author(s):  
Duo You Zhang ◽  
Peng Liu ◽  
Chun Fa Ouyoung ◽  
Qun Gao ◽  
Kang Sheng Zheng ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Differential Scanning Calorimetry ◽  
Tensile Strength ◽  
Bending Strength ◽  
Testing Machine ◽  
Nucleating Agent ◽  
Polybutylene Terephthalate ◽  
Scanning Calorimetry ◽  
Universal Testing ◽  
Crystallization Degree

PNA012 is a new nucleating agent on polybutylene terephthalate. The effect of different dosage of PNA012 on crystallization and mechanical properties were investigated by means of differential scanning calorimetry, universal testing machine, melt flow indexer and vicat softening testing machine. It was revealed that the PNA012 could substantially accelerate the crystallization of PBT. Compared with the pure PBT,the crystallization temperature of PBT/PNA012 rises from 196.3 °C to 199.7 °C and crystallization degree from 34.2% to 39.9%. The tensile Strength of PBT/PNA012 is increased 9.7%. The Bending Strength has a rise of 9.3% and the heat distortion temperatures of PBT/PNA012 is increased from 115.07°C to 125.94°C.

The Mechanical Properties and Thermodynamic Study on Polypropylene/Talc Composites

2014 ◽  
Vol 915-916 ◽  
pp. 751-754
Author(s):  
Shao Hui Wang
Keyword(s):  
Mechanical Properties ◽  
Differential Scanning Calorimetry ◽  
Tensile Strength ◽  
Electron Microscope ◽  
Impact Strength ◽  
Scanning Electron Microscope ◽  
Stearic Acid ◽  
Crystallization Rate ◽  
Scanning Calorimetry ◽  
Scanning Electron

The composites of PP/Talc modified by stearic acid were prepared and its effect on the properties of PP/Talc composites was investigated in this paper. The tensile strength and impact strength of PP/Talc composites increased about 15% and 30% compared with pure PP respectively. Based on surface analysis by scanning electron microscope (SEM), the Talcparticles buried well in PP matrix when the Talc was coated with the stearic acid. At the same time, it was found that Talc significantly increased the crystallization temperature and crystallization rate of PP by differential scanning calorimetry (DSC).

In Situ Synthesis and Mechanical Properties of Polylactic Acid/Hydroxyapatite Functionalized Graphene Nanocomposite

2017 ◽  
Vol 735 ◽  
pp. 230-234
Author(s):  
Aekkapan Sriboonrung ◽  
Siree Tangbunsuk ◽  
Chomdao Sinthuvanich ◽  
Wirunya Keawwattana
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Polylactic Acid ◽  
Tensile Modulus ◽  
Precipitation Method ◽  
Functionalized Graphene ◽  
X Ray Diffraction ◽  
Elongation At Break ◽  
Graphene Nanocomposite

The hydroxyapatite functionalized graphene (HAp-GnP) was prepared by precipitation method. It was characterized by Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). Polylactic acid (PLA)/HAp-GnP and PLA/HAp-GnP composites were prepared in film by solution casting. The amount of HAp-GnP and HAp/GnP filled in PLA was fixed at 5% (by weight). The influence of HAp-GnP in the mechanical properties including tensile strength (TS), tensile modulus (E) and elongation at break (EB) of composites was investigated. It was found that tensile strength (TS) and tensile modulus (E) of the PLA/HAp-GnP composite were higher than those of PLA/HAp/GnP composite as a result of HAp making the interfacing with graphene leading to the greater distribution of HAp-GnP in PLA matrix. The PLA/HAp-GnP composite is applicable to be applied as bone substitute in the future.

MORFOLOGI DAN PROPERTI CAMPURAN KARET ALAM/POLYPROPYLENE YANG DIVULKANISASI DINAMIK DALAM INTERNAL MIXER

REAKTOR ◽  
2007 ◽  
Vol 11 (2) ◽  
pp. 71
Author(s):  
Bahruddin Bahruddin ◽  
Sumarno Sumarno ◽  
Gede Wibowo ◽  
Nonot Suwarno
Keyword(s):  
Differential Scanning Calorimetry ◽  
Tensile Strength ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Scanning Calorimetry ◽  
Elongation At Break ◽  
Izod Impact ◽  
Internal Mixer ◽  
Scanning Electron

Morfologi dan properti campuran (blend) karet alam jenis SIR-20/polypropylene (NR/PP) yang divulkanisasi dinamik dalam internal mixer telah dipelajari. Blend dibuat dengan rasio berat NR/PP 10/90, 20/80, 50/50, 60/40 dan 70/30 dan komposisi sulfur 3 dan 5 phr (per hundred rubber). Proses pencampuran dilakukan pada suhu 180 oC dan kecepatan rotor 60 rpm. Analisa morfologi menggunakan SEM (Scanning Electron Microscope) dan DSC (Differential Scanning Calorimetry). Properti mekanik yang diukur meliputi tensile strength, elongation at break, izod impact, tearing dan hardness, berdasarkan standar ASTM. Didapatkan bahwa peningkatan rasio NR/PP menghasilkan distribusi partikel NR yang makin merata dengan ukuran yang makin kecil. Morfologi blend menunjukkan sistem dua fasa dan vulkanisasi fasa NR terjadi secara parsial dalam matrik PP. Peningkatan rasio NR/PP dan komposisi sulfur dapat meningkatkan properti elongation at break, namun menurunkan properti tensile strength, izod impact, tearing dan hardness. Elongation at break tertinggi yang dapat diperoleh adalah 70% pada rasio blend NR/PP 70/30 dan komposisi sulfur 5 phr.

Biocomposites from Cassava Pulp/Polylactic Acid/Poly(butylene Succinate)

2013 ◽  
Vol 747 ◽  
pp. 367-370 ◽  
Author(s):  
Parina Kangwanwatthanasiri ◽  
Nitinat Suppakarn ◽  
Chaiwat Ruksakulpiwat ◽  
Ruksakulpiwat Yupaporn
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Polylactic Acid ◽  
Glycidyl Methacrylate ◽  
Interfacial Adhesion ◽  
Butylene Succinate ◽  
Elongation At Break ◽  
Cassava Pulp ◽  
Polybutylene Succinate ◽  
Internal Mixer

In this study, effect of PBS content on physical properties of polylactic acid (PLA) and polybutylene succinate (PBS) blends was studied. The content of PBS was varied from 0 30 %wt. The blends were mixed using an internal mixer. The samples were prepared using a compression molding. It was shown that tensile strength and Youngs modulus of PLA/PBS blends were decreased with increasing PBS content from to 0 30 %wt. Nevertheless, elongation at break and impact strength of the blend were increased with increasing the amount of PBS up to 20 %wt. Polylactic acid grafted glycidyl methacrylate (PLA-g-GMA) was used as the compatibilizer in PLA/PBS/PLA-g-GMA blends. PLA-g-GMA was shown to improve interfacial adhesion between PLA and PBS. With the addition of PLA-g-GMA, mechanical properties of PLA/PBS blend were improved. The preparation of cassava pulp (CP) to be used as filler in PLA/PBS blends and PLA/PBS/PLA-g-GMA blends was studied. Effect of CP content on mechanical properties CP/PLA/PBS composites was studied. PLA-g-GMA was also used as compatibilizer in CP/PLA/PBS composites. The mechanical properties of CP/PLA/PBS composites were improved with the addition of PLA-g-GMA as well.

Hydrodegradation of starch incorporated polylactic acid with acrylic acid as interfacial linker

e-Polymers ◽  
2010 ◽  
Vol 10 (1) ◽  
Author(s):  
Yinghong Xiao ◽  
Jianfei Che ◽  
Anne Bergeret ◽  
Chun Mao ◽  
Jian Shen
Keyword(s):  
Mechanical Properties ◽  
Differential Scanning Calorimetry ◽  
Acrylic Acid ◽  
Polylactic Acid ◽  
Interfacial Adhesion ◽  
Composite Graft ◽  
Dsc Analysis ◽  
Scanning Calorimetry ◽  
Graft Modification ◽  
Scanning Electron

AbstractGraft modification of polylactic acid (PLA) with acrylic acid (AA) using double initiators was studied. The composition of the graft copolymer (PLA-AA) was characterized with Fourier transform infrared (FTIR) spectroscopy and introduction of AA was demonstrated. Differential scanning calorimetry (DSC) analysis indicated that due to the increasing graft efficacy the modified PLA had better interfacial adhesion with starch compared to neat PLA. Fracture surfaces of starch/PLA and starch/PLA-AA were observed using scanning electron microscope (SEM) and the results also demonstrated the better interfacial adhesion of the latter composite. Graft modification of PLA matrix and introduction of starch played important roles in enhancing the mechanical properties (strength and modulus) while remaining good degradability of the composite.

Influence of Bagasse Carboxymethyl Cellulose Addition on the Thermal and Mechanical Properties of PLA Composites

2013 ◽  
Vol 747 ◽  
pp. 157-161
Author(s):  
S. Kamthai ◽  
Rathanawan Magaraphan
Keyword(s):  
Mechanical Properties ◽  
Differential Scanning Calorimetry ◽  
Tensile Strength ◽  
Carboxymethyl Cellulose ◽  
Room Temperature ◽  
Environmental Concern ◽  
Thermal And Mechanical Properties ◽  
Scanning Calorimetry ◽  
Melting Temperatures ◽  
Bagasse Waste

According to the availability of bagasse waste and increasing environmental concern, this research is focused on the preparation of polylactic acid (PLA)/bagasse carboxymethyl cellulose (CMCB) composite in order to improve the thermal and mechanical properties of PLA/CMCB film. PLA were mixed with CMCB at different ratios (1, 2, 4 and 8%, w/w of PLA), by kneading in two roll mills and then hot pressing into film. The results revealed that the addition of CMCB had significant effects on PLA composites properties. Differential scanning calorimetry (DSC) measurement indicated that the presence of CMCB accelerated the reduction of glass transition, and melting temperatures. Moreover the CMCB could improve the storage modulus of PLA composites at high temperature because its cold crystallization was developed. At room temperature, the tensile strength and elongation of PLA composite (but not modulus) were not significantly different with an increase of CMCB contents.

Sign in / Sign up

Export Citation Format

Share Document