scholarly journals CHEMICAL AND MECHANICAL PROPERTIES OF VELVET TAMARIND FRUIT (DIALIUM GUINEENSE)

2016 ◽  
Vol 36 (1) ◽  
pp. 252-260
Author(s):  
FU Asoiro ◽  
SL Ezeoha ◽  
GI Ezenne ◽  
CB Ugwu
Keyword(s):  
Mechanical Properties ◽  
Chemical Properties ◽  
Mineral Elements ◽  
Fruit Pulp ◽  
Crude Fibre ◽  
Nutritional Values ◽  
Promising Source ◽  
Yield Force ◽  
And Storage ◽  
Pronounced Reduction

Information on chemical properties of fruits is crucial in processing it into different foods. Mechanical properties of fruits determine their susceptibility to mechanical damages that occur during harvest, transportation, and storage; and which eventually lead to a pronounced reduction in commercial value. This study was conducted to investigate the chemical and mechanical properties of unshelled (black), shelled (yellow) and kernel of Dialium guineense fruit. The chemical properties investigated include some proximate and mineral elements. The mechanical properties were bio-yield force, rupture force, deformation at rupture point, deformation ratio at rupture point, compressive strength and total strain energy. The fruit pulp was found to be composed of protein (9.4%), carbohydrate (75%), crude fat (5.2%), crude fibre (4.6%), and ash content (2.4%) at 19% moisture content (wb). The mineral composition of the pulp were sodium (3.2 g/kg), magnesium (2.9 g/kg), phosphorus (0.5 g/kg), calcium (0.5 g/kg), iron (0.1 g/kg), and vitamin C (0.3 g/kg) at a pH  of 3.9. Less force is required to crack the fruit across the length, followed by across the thickness and then across the width. Velvet tamarind (Dialium guineense) fruit pulp is a promising source of food and essential minerals due to its nutritional values, hence facilitating its postharvest processing is inevitable.  http://dx.doi.org/10.4314/njt.v36i1.30

scholarly journals Chemical and microbial properties of kiln-smoked catfish in selected locations in Ilorin Metropolis, Nigeria

2021 ◽  
Vol 23 (2) ◽  
pp. 83-94
Author(s):  
O. A. Abiodun ◽  
A. Ojo ◽  
R. M. O. Kayode ◽  
V. E. Edem ◽  
M. O. Shittu ◽  
...  
Keyword(s):  
Chemical Properties ◽  
Mineral Elements ◽  
Polycyclic Hydrocarbon ◽  
Salmonella Spp ◽  
Crude Fibre ◽  
Trichoderma Spp ◽  
Lead And Cadmium ◽  
Shigella Spp ◽  
Klebsiella Spp ◽  
Vibrio Spp

The use of smoking kiln for drying catfish is on the increase in Nigeria due to its effectiveness in reducing moisture and contamination with toxic compounds during smoking. Chemical properties of kiln-smoked catfish in selected locations in Ilorin metropolis were determined in this study. Kiln-smoked catfish were obtained from four major locations (Oyun, Asa-Dam, Tanke and Agbo-Oba) in Ilorin, Nigeria. The samples were subjected to chemical and polycyclic hydrocarbon content analyses. Dried catfish from all the locations had low moisture and crude fibre contents. There were no significant differences (p>0.05) in the crude fibre contents of the kiln-smoked catfish. Protein contents ranging from 53.72-56.49% were obtained for the kilnsmoked catfish samples. Fat contents ranged from 9.92-11.77% while the carbohydrate contents ranged from 19.02-23.59%. Potassium was the most abundant mineral in the samples with no traces of lead and cadmium. Agbo-Oba samples contained the highest pyrene (2983.215 ng/ml) and total polycyclic hydrocarbon (PAHs) (3349.090 ng/ml). Data on steroid fractions indicated that 17b-estradiol was significantly greater in quantity than those recorded from other steroid fractions. Microbial analyses of the samples revealed the presence of the following pathogenic organisms: Klebsiella spp, Salmonella spp, Shigella spp, Pseudomonas aeruginosa, Staphylococcus aureus, Bacillus cereus, Vibrio spp, Aspergillus niger, penicilium spp, Trichoderma spp which are harmful to man. The use of smoking kiln method improved the nutrients and reduced PAHs in catfish. Keywords: Smoking kiln, Catfish, Chemical properties, Polycyclic hydrocarbon, Mineral elements

scholarly journals MICROORGANISMS IN MACAUBA FRUITS (Acrocomia aculeata) AFTER DIFFERENT POST-HARVEST TREATMENTS AND STORAGE

2016 ◽  
Vol 2 (3) ◽  
pp. 001-013
Author(s):  
Lorena Aires Lombardi Queiroz ◽  
Camila Sales Nascimento ◽  
Ana Luíza Machado Silveira ◽  
Vera Lúcia dos Santos ◽  
Maria Helena Caño Andrade
Keyword(s):  
Vegetable Oil ◽  
Lipase Activity ◽  
Storage Period ◽  
Fruit Pulp ◽  
High Productivity ◽  
Post Harvest ◽  
Rapid Deterioration ◽  
Acrocomia Aculeata ◽  
Promising Source ◽  
And Storage

The  Macauba fruits (Acrocomia aculeata) may be promising source of vegetable oil for food purposes, cosmetics and energy, due to the high productivity and obtainment of  two oil types. However, the main constraint is associated with the rapid deterioration of the fruit, leading to production of oil with high acidity. The acidification process can be caused by microorganisms growing associated with fruits, by high pulp moisture and by the endogenous lipase activity. This study aimed to quantify microorganisms present in the husk and fruit pulp after different post-harvest treatments and after 30 days storage, comparing effectiveness of different conservation treatments by simple and inexpensive techniques. The storage period was determined according to preliminary tests where it was observed that at 30 days of harvest the fruits were already deteriorating. After storage there was a predominance of fungi in pulp and bacteria and yeasts in the husk.

scholarly journals Nutrition Evaluation of Faidherbia albida Seeds and Pulp as Source of Feeds for Livestock

2007 ◽  
Vol 7 (16) ◽  
pp. 01-11
Author(s):  
Hassan L. G. ◽  
◽  
Kabiru J Umar ◽  
Yuguda H
Keyword(s):  
Crude Protein ◽  
Dry Matter ◽  
Mineral Elements ◽  
Proximate Analysis ◽  
Faidherbia Albida ◽  
Crude Fibre ◽  
Crude Lipid ◽  
Nutritional Values ◽  
Livestock Feeds ◽  
Acacia Albida

The present study was conducted to find out the nutritional values of Faidherbia albida (Acacia albida) seeds and pulp to be used as components in livestock feeds. The samples were randomly collected from various trees during the period of January to February. The samples were separated, milled and analysed for proximate components and mineral elements using standard methods of the AOAC. Proximate analysis results showed that the concentrations of tested parameters in the seed and the pulp respectively on % dry matter were: dry matter (90.0 + 0.4; 93.3 + 0.2), ash (3.3 + 0.1; 6.7 + 0.1), crude protein (20.6 + 1.2; 19.5 + 0.4), crude lipid (13.3 + 0.1; 3.3 + 0.1), crude fibre (6.7 + 0.1; 13.3 + 0.2), and available carbohydrate (46.1 + 0.1; 50.53 + 0.7). The results indicated that the contents of dry matter, ash, crude fibre and available carbohydrate were significantly higher (p < 0.05) in the pulp compared to the seed while the crude lipid values, however, were significantly higher (p < 0.05) in seeds compared to pulp. Crude protein values did not differ significantly (p > 0.05) between treatment means of seeds and pulp. The estimated energy value was significantly higher (p < 0.05) in the seed (1,682 kJ/100g) compared to pulp (1,363kJ/100g). The results for the mineral analysis indicate that the seeds and pulp contain appreciable concentrations (mg/100g) of Ca (136.6 + 5.0; 55.0 + 5.0); Mg (135.0 + 2.0 + 5.0; 84.7 + 3.0); P (26.6 + 0.9; 29.6 + 0.7); K (144.5 + 0.2; 88.8 + 0.1); Na (12.5 + 0.1; 6.8 + 0.1); Fe (6.2 + 0.2; 8.8 + 0.3); Cu (5.8 + 0.1; 2.5 + 0.1) and Zn (8.0 + 0.1; 3.0 + 0.1). Mineral elements in seed are significantly higher (p < 0.05) compared to that of pulp in most cases. From the results it can be inferred that the seed and pulp of F. albida could be an important source of feed ingredient for livestock if properly harnessed.

scholarly journals Use of Families of Euphorbiaceae for the Production of Biodiesel in Semiarid Areas

Proceedings ◽  
2021 ◽  
Vol 52 (1) ◽  
pp. 2
Author(s):  
Noé Anes García ◽  
Antonio Luis Marqués Sierra
Keyword(s):  
Fossil Fuels ◽  
Chemical Properties ◽  
Petroleum Products ◽  
Prolonged Storage ◽  
Physical Chemical ◽  
Semiarid Areas ◽  
Storage Times ◽  
And Storage ◽  
Improved Characteristics ◽  
Made In

In recent years, developments made to reduce the consequences generated using petroleum products have been strengthening; therefore, biofuels have become a requirement in different countries worldwide with the objective of reducing not only the high levels of current pollution, but also mitigating the effects generated by global warming. Despite the advances that have been made in the field of research on Jatropha, it is still necessary to carry out more detailed studies aimed at achieving a better use of it, identifying the influence of its physical–chemical properties in terms of quality levels, as well as determining its behavior when mixed with palm oil to achieve a biodiesel with better yields, whose impact will be reflected mainly in the environmental field, helping to mitigate the production of greenhouse gases that are produced by petroleum products. Although currently the biofuels sector has made important advances in research, it is necessary to deepen the physical–chemical analyses both in the production and storage processes of biodiesel, so that in the future it can be fully fulfilled with the energy requirements that are currently only achieved with fossil fuels, so it is necessary to direct this research toward the development of new products with improved characteristics, especially when exposed to prolonged storage times and low temperatures.

scholarly journals Seasonal and Temperature Dependent Variations in Proximate Parameters and Mineral Elements of Smoke-Dried Catfish (Clarias gariepinus, Burchell, 1822) using Traditional and Eco-Friendly Kilns in Lagos, Nigeria

2020 ◽  
Vol 24 (4) ◽  
pp. 639-643
Author(s):  
M.M. Ogunbambo
Keyword(s):  
Crude Protein ◽  
Clarias Gariepinus ◽  
Mineral Elements ◽  
Drying Process ◽  
Temperature Dependent ◽  
Crude Fibre ◽  
Significant Difference ◽  
Dry Seasons ◽  
Mineral Compositions ◽  
Wet And Dry Seasons

Smoke-drying Clarias gariepinus (catfish) provides animal protein and a source of livelihood in Lagos, Nigeria. Changes occurring to seasonal and mineral compositions of smoke-dried catfish using local Traditional Drum Kiln (TDK) and a newly constructed Eco-Friendly Kiln (EFK) fitted with a flame, drying and electronic components was carried out in this study. The smoke-drying process was carried out in both wet and dry seasons and smoke-dried catfish samples stored at ambient and adjusted refrigerated temperatures of 28 and 4 0C. The smoke-drying procedure was  standardized at 60 - 80 0C and kiln lasted 24 ± 3 hours. Moisture content results showed a significant difference when the catfish samples were smoke-dried using TDK and EFK and stored in ambient and controlled temperatures in both wet and dry seasons while crude protein, lipid, ash and crude fibre values were significantly different when stored only in dry season. Mineral elements phosphorus, sodium, copper, magnesium and iron showed a significant difference when stored at both temperatures and seasons using both kilns. Mineral elements were found to be most stable in smoke-dried catfish samples when stored at controlled temperatures. This work proved that standardizing smoke-drying process using both kilns resulted in good quality smoke-dried catfish but showed that higher biochemical values were obtained when EFK is used. Key words: Nigeria, Smoke-drying Kilns, Seasons, Ambient, Controlled Temperatures

scholarly journals Waste Tire Particles and Gamma Radiation as Modifiers of the Mechanical Properties of Concrete

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Eduardo Sadot Herrera-Sosa ◽  
Gonzalo Martínez-Barrera ◽  
Carlos Barrera-Díaz ◽  
Epifanio Cruz-Zaragoza
Keyword(s):  
Mechanical Properties ◽  
Gamma Radiation ◽  
Chemical Properties ◽  
Plain Concrete ◽  
Cement Matrix ◽  
Portland Cement Concrete ◽  
High Concentration ◽  
Good Tool ◽  
Waste Tire ◽  
Physical And Chemical

In polymer reinforced concrete, the Young’s modulus of both polymers and cement matrix is responsible for the detrimental properties of the concrete, including compressive and tensile strength, as well as stiffness. A novel methodology for solving such problems is based on use of ionizing radiation, which has proven to be a good tool for improvement on physical and chemical properties of several materials including polymers, ceramics, and composites. In this work, particles of 0.85 mm and 2.80 mm obtained from waste tire were submitted at 250 kGy of gamma radiation in order to modify their physicochemical properties and then used as reinforcement in Portland cement concrete for improving mechanical properties. The results show diminution on mechanical properties in both kinds of concrete without (or with) irradiated tire particles with respect to plain concrete. Nevertheless such diminutions (from 2 to 16%) are compensated with the use of high concentration of waste tire particles (30%), which ensures that the concrete will not significantly increase the cost.

Sign in / Sign up

Export Citation Format

Share Document