scholarly journals Magnetic biochar from alkali-activated rice straw for removal of rhodamine B from aqueous solution

2019 ◽  
Vol 25 (4) ◽  
pp. 536-544 ◽  
Author(s):  
Zhaogang Ren ◽  
Fang Chen ◽  
Bin Wang ◽  
Zhongxian Song ◽  
Ziyu Zhou ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Rice Straw ◽  
Rhodamine B ◽  
Electrostatic Interactions ◽  
Organic Dyes ◽  
Low Cost ◽  
Magnetic Biochar ◽  
Other Substances ◽  
Initial Ph ◽  
Alkali Activated

To address organic dye wastewater, economic and effective adsorbents are required. Here, magnetic biochar from alkali-activated rice straw (AMBC) was successfully synthesized using one-step magnetization and carbonization method. The alkaline activation caused the large specific surface area, high pore volume and abundant oxygen-containing groups of the AMBC, and the magnetization gave the AMBC a certain degree of electropositivity and fast equilibrium characteristics. These characteristics collectively contributed to a relative high adsorption capacity of 53.66 mg g<sup>−1</sup> for this adsorbent towards rhodamine B (RhB). In brief, RhB can spontaneously adsorb onto the heterogeneous surface of the AMBC and reach the equilibrium in 60 min. Although the initial pH, ionic strength and other substances of the solution affected the adsorption performance of the AMBC, it could be easily regenerated and reused with considerable adsorption content. Based on the results, H-bonds, π–π stacking and electrostatic interactions were speculated as the primary mechanisms for RhB adsorption onto the AMBC, which was also demonstrated by the FTIR analysis. With the advantageous features of low cost, easy separation, considerable adsorption capacity and favorable stability and reusability, the AMBC would be a potential adsorbent for removing organic dyes from wastewater.

scholarly journals Adsorption Study of Cu2+ Ions from Aqueous Solutions by Bael Flowers (Aegle marmelos)

2020 ◽  
Vol 11 (4) ◽  
pp. 11891-11904
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Metal Ion ◽  
Low Cost ◽  
Sem Analysis ◽  
Ion Concentration ◽  
Maximum Adsorption Capacity ◽  
Aegle Marmelos ◽  
Batch Mode ◽  
Initial Ph

In the present study, batch mode adsorption was carried out to investigate the adsorption capacity of dried bael flowers (Aegle marmelos) for the adsorptive removal of Cu(II) ions from aqueous solutions by varying agitation time, initial metal concentration, the dose of adsorbent, temperature, and initial pH of the Cu(II) ion solution. The percentage removal of 98.7% was observed at 50 ppm initial metal ion concentration, 0.5 g/100.00 cm3 adsorbent dosage, within the contact time of 120 minutes at 30 ºC in the pH range of 4 – 7. The sorption processes of Cu(II) ions was best described by pseudo-second-order kinetics. Langmuir isotherm had a good fit with the experimental data with 0.97 of correlation coefficient (R2), and the maximum adsorption capacity obtained was 23.14 mg g-1 at 30 ºC. The results obtained from sorption thermodynamic studies suggested that the adsorption process is exothermic and spontaneous. SEM analysis showed tubular voids on the adsorbent. FTIR studies indicated the presence of functional groups like hydroxyl, –C-O, –C=O, and amide groups in the adsorbent, which can probably involve in metal ion adsorption. Therefore, dried bael flowers can be considered an effective low-cost adsorbent for treating Cu(II) ions.

scholarly journals Rice Straw Biochar and Magnetic Rice Straw Biochar for Safranin O Adsorption from Aqueous Solution

Water ◽  
2022 ◽  
Vol 14 (2) ◽  
pp. 186
Author(s):  
Do Thi My Phuong ◽  
Nguyen Xuan Loc
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Rice Straw ◽  
Batch Adsorption ◽  
Particle Diffusion ◽  
Order Kinetic ◽  
Magnetic Biochar ◽  
Intra Particle Diffusion ◽  
Rice Straw Biochar ◽  
Safranin O

This study investigates the adsorption of Safranin O (SO) from aqueous solution by both biochar and magnetic biochar derived from rice straw. Rice straw biochar (RSB) was made by pyrolysis in a furnace at 500 °C, using a heating rate of 10 °C·min−1 for 2 h in an oxygen-limited environment, whilst the magnetic rice straw biochar (MRSB) was produced via the chemical precipitation of Fe2+ and Fe3+. The physicochemical properties of the synthesized biochars were characterized using SEM, SEM- EDX, XRD, FTIR techniques, and N2 adsorption (77 K) and pHpzc measurements. Batch adsorption experiments were used to explore the effect of pH, biochar dosage, kinetics, and isotherms on the adsorption of SO. Experimental data of RSB and MRSB fit well into both Langmuir and Freundlich isotherm models, and were also well-explained by the Lagergren pseudo-second-order kinetic model. The maximum SO adsorption capacity of MRSB was found to be 41.59 mg/g, while for RSB the figure was 31.06 mg/g. The intra-particle diffusion model indicated that the intra-particle diffusion may not be the only rate-limiting step. The collective physical and chemical forces account for the adsorption mechanism of SO molecules by both RSB and MRSB adsorbents. The obtained results demonstrated that the magnetic biochar can partially enhance the SO adsorption capacity of its precursor biochar and also be easily separated from the solution by using an external magnet.

scholarly journals Neem Leaves as Adsorbent for Dye Waste water Treatment

2019 ◽  
Vol 8 (9) ◽  
pp. 3071-3073
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Ph Value ◽  
Low Cost ◽  
Waste Water Treatment ◽  
Blue Dye ◽  
Aqueous Streams ◽  
Neem Leaves ◽  
Initial Ph ◽  
Adsorbent System

In the present investigation , neem leaves are obtained from the agricultural fields and its potential for the removal of dye is tested with the model system of methylene blue in water . The MB has health hazards, its been reported that exposures to the dyes cause allergic reactions, and hence its reflected as toxic. The results obtained from batch experiments are quite useful in giving information about the efficacy of dye-adsorbent system. The influence of factors such as the initial pH value, adsorbent dose, and time of contact was investigated. The results indicate that the percentage removal also increased with the rise in the adsorption capacity (qe). 82% of colour elimination can be obtained at the dose of 100g/l NLP for methylene blue of 10mg/l concentration. The optimal parameters for this experiment were 10mg/l for initial dye concentration, 5gm/50ml adsorbent dosage and pH 8. In the batch system, the adsorption capacity was increased when the parameters were increased until it achieved the equilibrium. Langmuir adsorption isotherm graphics plotted with l/qevis 1/Ce. Trend lines for the adsorption data of different concentration of methylene blue with neem leave as adsorbent is plotted. The linear regression was piloted using plot l/qevis 1/Ce; it was found that R2 value are quite closer to 1 signifying Langmuir isotherm as a good fit for this experimental data. Results indicated that neem leaves has potential to remove Methylene Blue Dye from aqueous streams and can be successfully used as a low cost adsorbent.

The Behaviors of Removing Silver Ions by Low-Cost Expanded Rice Husk, Nature Diatomite and Nature Bentonite as Sorbents

2012 ◽  
Vol 724 ◽  
pp. 472-475
Author(s):  
Xuan Liang ◽  
Xue Gang Luo ◽  
Xiao Yan Lin ◽  
Qiang Mei
Keyword(s):  
Adsorption Capacity ◽  
Rice Husk ◽  
Ph Value ◽  
Low Cost ◽  
Silver Ions ◽  
Maximum Adsorption Capacity ◽  
Removal Of Heavy Metals ◽  
Initial Ph ◽  
Influence Of Ph ◽  
By Products

Low cost industrial and agricultural by-products are promising materials for water pollution treatment such as removal of heavy metals. This work deals with removal of silver ions from solutions using expanded rice husk (ERH), nature diatomite (ND) and nature bentonite (NB). Firstly the influence of pH value of the solution on adsorption capacity for silver ions was studied, and then the effect of initial silver concentration on adsorbents adsorption capacity was investigated. The silver ions removal percentage increases with initial pH and achieves a maximum value of nearly 94% at pH= 5.0 ± 0.5 for ERH. The maximum adsorption capacity is 18.6 mg/g for ERH.

scholarly journals Effectiveness of Alkali-Acid Treatment in Enhancement the Adsorption Capacity for Rice Straw: The Removal of Methylene Blue Dye

2013 ◽  
Vol 2013 ◽  
pp. 1-15 ◽  
Author(s):  
Nady A. Fathy ◽  
Ola I. El-Shafey ◽  
Laila B. Khalil
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Rice Straw ◽  
Acid Treatment ◽  
Low Cost ◽  
Second Order ◽  
Isotherm Models ◽  
Blue Dye ◽  
Acid Modification ◽  
Pseudo Second Order

The effectiveness of alkali-acid modification in enhancement the adsorption capacity of rice straw (RS) for removing a basic dye was studied. The obtained adsorbents were characterized by slurry pH, pHPZC, iodine number, methylene blue number, FTIR, and SEM analyses. Adsorption of methylene blue (MB) was described by the Langmuir, Freundlich, Tempkin, and Redlich-Peterson isotherm models. Effects of contact time, initial concentration of MB dye, pH of solution, adsorbent dose, salt concentration of NaCl, and desorbing agents on the removal of MB were reported. Kinetic studies were analyzed using the pseudo-first-order, pseudo-second-order, and the intraparticle diffusion models and were found to follow closely the pseudo-second-order model. Equilibrium data were best represented by the Langmuir and Redlich-Peterson isotherms. The adsorption capacities were varied between 32.6 and 131.5 mg/g for untreated and treated RS samples with NaOH-1M citric acid (ARS-1C), respectively. Adsorption behavior of the ARS-1C sample was experimented in a binary mixture containing methylene blue (basic) and reactive blue 19 (acidic) dyes which showed its ability to remove MB higher than RB19. Overall, the results indicate that the alkali-acid treatment proved to be potential modification for producing effective low-cost adsorbents for the removal of the basic dyes from wastewater.

A functionalized tannin-chitosan bentonite composite with superior adsorption capacity for Cr(VI)

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Zhongmin Li ◽  
Peng Zou ◽  
Junzhou Yang ◽  
Miaoyang Huang ◽  
Linye Zhang ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Raw Materials ◽  
Low Cost ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
Initial Ph ◽  
System Part ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Xrd Patterns

AbstractA novel functionalized tannin-chitosan bentonite composite (TCBC) was successfully synthesized. The formation of the composite was confirmed by the X-ray diffraction (XRD) patterns and Fourier transform infrared spectroscopy (FT-IR) analysis. The pHpzc of TCBC was 3.38. The influences such as pH, dosage of TCBC, temperature and initial Cr(VI) concentration on adsorption capacity were investigated. The experimental data indicated that the almost saturated adsorption of the TCBC towards Cr(VI) in 100 min. The maximum adsorption capacity was 262.08 mg/g at 333 K with initial pH = 2.5. The adsorption kinetics of Cr(VI) on TCBC followed the pseudo-second-order kinetics model. The isothermal data were well described by the models of Langmuir, Freundlich and Temkin. The results revealed that the adsorption of Cr(VI) on TCBC existed comprehensive effects and mainly belong to the chemisorption. The TCBC could keep good performances (qe = 192.17 mg/g) in five runs, 1 M NaOH was used as eluent for desorption, which showed a high desorption efficiency. Studies showed TCBC prepared with low cost and green raw materials, and simple green preparation technology had high adsorption capacity, good reusability and acidic tolerance. By exploring the Cr(VI)-Cr(III) hybrid system, part of Cr(VI) was reduced to Cr(III) and adsorbed by TCBC. The optimal adsorption pH of Cr(III) was 5.0.

scholarly journals Biochars derived from bamboo and rice straw for sorption of basic red dyes

PLoS ONE ◽  
2021 ◽  
Vol 16 (7) ◽  
pp. e0254637
Author(s):  
Ebenezer Ampofo Sackey ◽  
Yali Song ◽  
Ya Yu ◽  
Haifeng Zhuang
Keyword(s):  
Adsorption Capacity ◽  
Rice Straw ◽  
Low Cost ◽  
Dye Adsorption ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Isotherm Models ◽  
Acceptor Interaction ◽  
Equilibrium Data ◽  
Pseudo Second Order

The primary purpose of this study is to eliminate Basic Red 46 dye from aqueous solutions utilizing batch experiments by adsorption on biochars prepared from bamboo and rice straw biomass. Biochars prepared from bamboo (B), and rice straw (R) was pyrolyzed at 500°C (B500 and R500). Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR) Spectroscopy, X-ray Diffraction (XRD), and surface area and porosity analyzers were used to characterize the B500 and R500 samples. The characterization results indicated that the biochars possessed an amorphous porous structure with many functional groups consisting primarily of silicates. The adsorption rate of BR46 was evaluated using two kinetic models (pseudo-first-order and pseudo-second-order), and the results indicated that the pseudo-second-order model fitted to the experimental data well (R2>0.99). Nearly 24 h was sufficient to achieve equilibrium with the dye adsorption for the two biochars. R500 had a greater adsorption efficiency than B500. As pH levels increased, the dye’s adsorption capability increased as well. The Langmuir and Freundlich isotherm models were used to investigate the equilibrium behavior of BR46 adsorption, and the equilibrium data fitted well with the Langmuir model (R2>0.99) compared to the Freundlich model (R2>0.89). The maximum adsorption capacities of BR46 are 9.06 mg/g for B500 and 22.12 mg/g for R500, respectively. Additionally, adsorption capacity increased as temperature increased, indicating that adsorption is favored at higher temperatures. The electrostatic interaction is shown to be the dominant mechanism of BR46 adsorption, and BR46 acts as an electron-acceptor, contributing to n-π EDA (Electron Donor-Acceptor) interaction. Thermodynamic parameters for the dye-adsorbent system revealed that the adsorption process is spontaneous and feasible. The values of the adsorption coefficient (Kd) were on the order of 102−103. Kd of R500 was greater than that of B500, indicating that R500 had a greater adsorption capacity. The results showed that R500 could be used as a low-cost alternative adsorbent for removing BR46 from effluents.

scholarly journals Kinetic, Mechanistic, Thermodynamic and Equilibrium Studies on the Adsorption of Rhodamine B by Acid Activated Low Cost Carbon

2008 ◽  
Vol 5 (2) ◽  
pp. 187-200 ◽  
Author(s):  
S. Arivoli ◽  
M. Henkuzhali
Keyword(s):  
Rhodamine B ◽  
Langmuir Isotherm ◽  
Low Cost ◽  
Mineral Acid ◽  
Isotherm Models ◽  
Equilibrium Studies ◽  
Freundlich Isotherms ◽  
Initial Ph ◽  
Equilibrium Data ◽  
Intra Particle Diffusion

A carbonaceous adsorbent prepared from an indigenous waste by acid treatment was tested for its efficiency in removing Rhodamine B (RDB). The parameters studied include agitation time, initial dye concentration, carbon dose, pH and temperature. The adsorption followed first order reaction equation and the rate is mainly controlled by intra-particle diffusion. Freundlich and Langmuir isotherm models were applied to the equilibrium data. The adsorption capacity (Qm) obtained from the Langmuir isotherm plots were 51.546, 47.236, 44.072 and 41.841 mg/g respectively at an initial pH of 7.0 at 30, 40, 50 and 60°C. The temperature variation study showed that the Rhodamine B adsorption is endothermic and spontaneous with increased randomness at the solid solution interface. Significant effect on adsorption was observed on varying the pH of the Rhodamine B solutions. Almost 90% removal of Rhodamine B was observed at 60°C. The Langmuir and Freundlich isotherms obtained, positive ΔH0value, pH dependent results and desorption of dye in mineral acid suggest that the adsorption of Rhodamine B on PSC involves physisorption mechanism.

Structural, Morphological and Optical Bandgap Analysis of Multifunction Applications of Y2O3 -ZnO Nanocomposites : Varistors and Visible Photocatalytic Degradations of Wastewater

2021 ◽  
Author(s):  
T.H AlAbdulaal ◽  
Manal AlShadidi ◽  
Mai Hussien ◽  
Ganesh Vanga ◽  
Abdel-Fatah Bouzidi ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Degradation ◽  
Rhodamine B ◽  
Diffuse Reflectance Spectroscopy ◽  
Organic Dyes ◽  
Low Cost ◽  
Combustion Method ◽  
Ac Electrical Conductivity ◽  
Nanoparticle Structure ◽  
Yttrium Doping

Abstract In this study, a combustion method as an efficient, easy, low-cost, and eco-friendly technique was used to synthesize nano-ZnO as a matrix with different yttrium doping ratios with different doping concentrations. Not only X-ray diffraction (XRD), but also scanning electron microscopy (SEM), and Fourier transformation Infrared spectroscopy (FT-IR) technique employed to characterize the structural and surface morphology of the Y2O3-ZnO nanocomposites. The obtained results supported ZnO's growth from crystalline to satisfactory nanoparticle structure by changing the yttrium doping concentrations inside ZnO nanoparticles. Moreover, UV-Vis diffuse reflectance spectroscopy, AC electrical conductivity, and current-voltage characteristics were considered to characterize the effects of yttrium doping on the energy bandgaps and electrical/dielectric properties and discussed the parameters of the ceramic varistors of the studied Y2O3-ZnO nano-complex oxides. The photocatalytic degradation efficiency of phenol, Methylene Blue, and Rhodamine B was investigated using all prepared Y2O3-ZnO nanostructured samples. As the yttrium doping ratios increased, the photocatalytic efficiency increased. After the addition of moderate Y3+ ions-doping, Further generation of hydroxyl radicals over ZnO. For Y2O3-ZnO (S5), the optimal photocatalyst is a degradation of 100 % of phenol, Methylene Blue, and Rhodamine B solutions compared to 80% of photocatalysis for ZnO stand alone. The prepared Y2O3-ZnO nanostructured materials are considered novel potential candidates in broad nano-applications ranging from biomedical and photocatalytic degradation for organic dyes and phenol to environmental and varistor applications.

scholarly journals Removal of humic acid from aqueous solution using polyacrylamide/chitosan semi-IPN hydrogel

2018 ◽  
Vol 2017 (1) ◽  
pp. 16-26 ◽  
Author(s):  
Zejun Liu ◽  
Shaoqi Zhou
Keyword(s):  
Aqueous Solution ◽  
Humic Acid ◽  
Ionic Strength ◽  
Adsorption Capacity ◽  
Electrostatic Interactions ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Initial Ph ◽  
Wide Ph Range ◽  
Order Kinetic Model

Abstract In this study, we provide the first documented removal of humic acid (HA) from aqueous solution using polyacrylamide/chitosan (PAAm/CS) semi-IPN hydrogel. The prepared semi-IPN hydrogel was characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). The factors effecting HA adsorption performance were individually tested, including initial pH, ionic strength, contact time, initial HA concentration, and temperature. The results indicated that semi-IPN hydrogel was successfully fabricated and can be applied in a wide pH range, from 3 to 9. Low ionic strength effectively enhanced the adsorption capacity. As the ionic strength increased, this enhancement was less obvious but still positive. The adsorption kinetics were fitted to a pseudo-first-order kinetic model, and the adsorption isotherm was described using the Sips isotherm model. The HA adsorption capacity increased with increasing temperature. The maximum adsorption capacity has the potential to attain 166.30 mg g−1, based on the Sips isotherm at 25 °C. Experiments demonstrated that the HA adsorption process can be primarily attributed to electrostatic interactions, and hydrogen bonding was also involved. Facile synthesis and good adsorptive performance indicate that semi-IPN hydrogel can be used for removing HA from water.

Sign in / Sign up

Export Citation Format

Share Document