scholarly journals PERENDAMAN DENGAN PERASAN BUAH JERUK LEMON (Citrus lemon) DAPAT MENURUNKAN KEKERASAN RESIN KOMPOSIT NANOHYBRID

2020 ◽  
Vol 16 (2) ◽  
pp. 49-53
Author(s):  
IGN Bagus Tista ◽  
◽  
IGAA Hartini Hartini ◽  
IA. Gitasanthi KDA ◽  
Keyword(s):  
Composite Resin ◽  
Applied Pressure ◽  
Surface Hardness ◽  
Composite Resins ◽  
Control Group ◽  
Control Group Design ◽  
Mechanical Condition ◽  
Hardness Tester ◽  
Significant Difference ◽  
Nanohybrid Composite

Composite resin is a restoration material that is often used because the composite resin has good aesthetic value like mimetic the teeth color. Composite resins have a physical and mechanical condition. One of the mechanical condition is hardness. The surface hardness of composite resins is the surface resistance of the composite resin material to the applied pressure. One of the factors influencing composite hardness is the food and beverages consumed. Consuming acidic drinks continuously for a long time period can erode composite resin filling. The purpose of this study was to determine the effect of soaking into a citrus lemon on the hardness of nanohybrid composite resin. This type of research was true experimental with pre-test post-test with control group design using 24 composite resin samples which are divided into 4 groups with 6 samples each. The groups in this study were nanohybrid composite resins soaked with citrus lemon and aqua dest for 60 minutes and 120 minutes. The hardness tested using a Vicker hardness tester. The results of the study using the LSD (Least Significant Difference) test showed that the significance value of p= 0.014 (p<0.05), which means that the use of citrus lemon for 120 minutes affected the hardness of nanohybrid composite resin. In conclusion, soaking with citrus lemon for 120 minutes reduces more the hardness of nanohybrid composite resin compared with soaking for 60 minutes.

scholarly journals Comparison of time-dependent changes in the surface hardness of different composite resins

2013 ◽  
Vol 07 (S 01) ◽  
pp. S020-S025 ◽  
Author(s):  
Suat Ozcan ◽  
Ihsan Yikilgan ◽  
Mine Betul Uctasli ◽  
Oya Bala ◽  
Zeliha Gonca Bek Kurklu
Keyword(s):  
Composite Resin ◽  
Surface Hardness ◽  
Multiple Comparisons ◽  
Composite Resins ◽  
Time Dependent ◽  
Bottom Surface ◽  
Significance Level ◽  
Hardness Tester ◽  
Significant Difference ◽  
Hardness Values

ABSTRACT Objective: The aim of this study was to evaluate the change in surface hardness of silorane-based composite resin (Filtek Silorane) in time and compare the results with the surface hardness of two methacrylate-based resins (Filtek Supreme and Majesty Posterior). Materials and Methods: From each composite material, 18 wheel-shaped samples (5-mm diameter and 2-mm depth) were prepared. Top and bottom surface hardness of these samples was measured using a Vicker′s hardness tester. The samples were then stored at 37°C and 100% humidity. After 24 h and 7, 30 and 90 days, the top and bottom surface hardness of the samples was measured. In each measurement, the rate between the hardness of the top and bottom surfaces were recorded as the hardness rate. Statistical analysis was performed by one-way analysis of variance, multiple comparisons by Tukey′s test and binary comparisons by t-test with a significance level of P = 0.05. Results: The highest hardness values were obtained from each two surfaces of Majesty Posterior and the lowest from Filtek Silorane. Both the top and bottom surface hardness of the methacrylate based composite resins was high and there was a statistically significant difference between the top and bottom hardness values of only the silorane-based composite, Filtek Silorane (p < 0.05). The lowest was obtained with Filtek Silorane. The hardness values of all test groups increased after 24 h (p < 0.05). Conclusions: Although silorane-based composite resin Filtek Silorane showed adequate hardness ratio, the use of incremental technic during application is more important than methacrylate based composites.

scholarly journals PENGARUH JUS JERUK DAN MINUMAN BERKARBONASI TERHADAP KEKERASAN PERMUKAAN RESIN KOMPOSIT

2017 ◽  
Vol 4 (1) ◽  
pp. 38
Author(s):  
Rusna Fiki Kafalia ◽  
Muh. Dian Firdausy ◽  
Arlina Nurhapsari
Keyword(s):  
Vickers Hardness ◽  
Orange Juice ◽  
Composite Resin ◽  
Surface Hardness ◽  
Negative Control ◽  
Control Group ◽  
Control Group Design ◽  
Hardness Tester ◽  
Acid Agent ◽  
Group B

Background: Orange juice and Carbonat drink contains an acid agent which can affect the surface hardness of composite resin. Changes of surface hardness of composite resin is caused by infiltration of water containing the acid agent that affect the bonding of matrix to filler composite resin. This study purpose to determine the effect of immersed orange juice and carbonat drink on surface hardness of composite resin. Method: This was experimental laboratory study with a pre and post test control group design. The samples of composite resin had 12 mm in diameters and 2 mm in thickness (n=27). Composite resin used is FiltexTM Z350 XT shades A2. Samples were divided into three groups : group A immersed with orange juice, group B immersed with carbonat drink, and group C immersed with aquadest as the negative control. Samples were immersed for 24 hours. The pre and post immertion of composite resin surface hardness were measured with Micro Vickers Hardness Tester. Results: Post immertion Vickers hardness was compared by using one way anova test. The result showed that immersed orange juice and carbonat drink significantly reduced the surface hardness of composite resin (p < 0,05). Concluision: The conclusion Immersed carbonat drink more reduced the surface hardness of composite than orange juice. It is suggested to reduce the duration direct exprossure of consumption carbonat drink.

scholarly journals Differences of methacrylate and silorane based composite resins surface hardness after 40% hydrogen peroxide application

2013 ◽  
Vol 25 (3) ◽  
Author(s):  
Amalina Putri ◽  
Rahmi Alma Farah Adang ◽  
Opik Taofik Hidayat
Keyword(s):  
Hydrogen Peroxide ◽  
Composite Resin ◽  
Artificial Saliva ◽  
Surface Hardness ◽  
Hardness Test ◽  
Composite Resins ◽  
Average Value ◽  
Hardness Tester ◽  
Significant Difference ◽  
The Difference

Composite restoration is frequently found on teeth before doing any bleaching treatment. Hydrogen peroxide is a bleaching agent which enable transition to one of the composite physical properties. The aim of this research was to observe the difference of surface hardness between methacrylate and silorane based composite resin after application of 40% hydrogen peroxide. This true experiment involved 36 specimens from two different disc-shaped methacrylate and silorane based composite resins, with 18 specimens methacrylate and 18 silorane. Every specimen groups were immersed in artificial saliva solution and divided into two groups; the first group consisted of 9 specimens of control which were tested directly using microvickers hardness tester and another group consisted of 9 specimens which had been added by 40% hydrogen peroxide for hardness test. The result showed the different surface hardness average value of metachrylate and silorane based composite resin after application of 40% hydrogen peroxide. The surface hardness of methacrylate and silorane based composite resins was 41.8 VHN and 33.7 VHN (p>0.05) with t-test, respectively. From this study concluded that there was no significant difference between methacrylate and silorane based composite resins after 40% hydrogen peroxide application.

scholarly journals Effect of whitening dentifrices on the surface roughness of a nanohybrid composite resin

2016 ◽  
Vol 10 (02) ◽  
pp. 170-175 ◽  
Author(s):  
Gabriela Migliorin da Rosa ◽  
Luciana Mendonça da Silva ◽  
Márcio de Menezes ◽  
Hugo Felipe do Vale ◽  
Diego Ferreira Regalado ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Composite Resin ◽  
Wilcoxon Test ◽  
Control Group ◽  
Mean Values ◽  
Short Period ◽  
Significant Difference ◽  
Before And After ◽  
Nanohybrid Composite ◽  
One Way Anova

ABSTRACT Objectives: The present study verified the influence of whitening dentifrices on the surface roughness of a nanohybrid composite resin. Materials and Methods: Thirty-two specimens were prepared with Filtek™ Z350 XT (3M/ESPE) and randomly divided into four groups (n = 08) that were subjected to brushing simulation equivalent to the period of 1 month. The groups assessed were a control group with distilled water (G1), Colgate Total 12 Professional Clean (G2), Sensodyne Extra Whitener Extra Fresh (G3), and Colgate Luminous White (G4). A sequence of 90 cycles was performed for all the samples. The initial roughness of each group was analyzed by the Surface Roughness Tester (TR 200-TIME Group Inc., CA, USA). After the brushing period, the final roughness was measured, and the results were statistically analyzed using nonparametric Kruskal–Wallis and Dunn tests for intergroup roughness comparison in the time factor. For intragroup and “Δ Final − Initial” comparisons, the Wilcoxon test and (one-way) ANOVA were, respectively, performed (α = 0.05). Results: The roughness mean values before and after brushing showed no statistically significant difference when the different dentifrices were used. None of the dentifrices analyzed increased significantly the nanohybrid composite resin surface roughness in a 1 month of tooth brushing simulation. Conclusions: These results suggest that no hazardous effect on the roughness of nanohybrid composite resin can be expected when whitening dentifrices are used for a short period. Similar studies should be conducted to analyze other esthetic composite materials.

Properties of New Glass-Ionomer Restorative Systems Marketed for Stress-Bearing Areas

2020 ◽  
Vol 45 (1) ◽  
pp. 104-110 ◽  
Author(s):  
D Fuhrmann ◽  
D Murchison ◽  
S Whipple ◽  
K Vandewalle
Keyword(s):  
Fracture Toughness ◽  
Composite Resin ◽  
Testing Machine ◽  
Surface Hardness ◽  
Glass Ionomer ◽  
Hardness Tester ◽  
Resin Coating ◽  
Significant Difference ◽  
Restorative Materials ◽  
Post Hoc

SUMMARY Objectives: The purpose of this study was to evaluate the properties (fracture toughness, surface hardness) of newer conventional glass-ionomer restorative materials that are marketed for posterior stress-bearing areas compared with more traditional glass-ionomer restorative materials marketed for non–load-bearing areas and composite-resin restorative materials. Methods and Materials: Notched-beam fracture toughness specimens were created in a mold with each tested material (Equia Forte, GC America, with and without a surface coating of Equia Forte Coat; Ketac Universal, 3M/ESPE; ChemFil Rock, Dentsply; Fuji IX GP Extra, GC; Ionostar Molar, VOCO; Filtek Z250, 3M/ESPE; Filtek Supreme Ultra, 3M/ESPE) and fractured using a universal testing machine after 24 hours of storage. Hardness values were determined on the surface of the fracture toughness specimens using a hardness tester. Data were analyzed with a one-way ANOVA and Tukey's post hoc test per property (alpha=0.05). Results: The composite-resin restorative materials had significantly greater fracture toughness than the glass-ionomer materials. There was no significant difference in fracture toughness between the glass-ionomer materials. The use of a resin coating significantly increased the surface hardness of the newer glass ionomer marketed for stress-bearing areas. Conclusions: Fracture toughness was not improved with the newer glass-ionomer restorative materials marketed for stress-bearing areas compared to the conventional glass-ionomer materials, however a resin coating provided greater surface hardness.

scholarly journals Comparison of microleakage of an alkasite restorative material, a composite resin and a resin-modified glass ionomer

2021 ◽  
Vol 20 ◽  
pp. e213981
Author(s):  
Fariba Motevasselian ◽  
Hamid Kermanshah ◽  
Ebrahim Rasoulkhani ◽  
Mutlu Özcan
Keyword(s):  
Composite Resin ◽  
Composite Resins ◽  
Glass Ionomer ◽  
Etch And Rinse ◽  
Significant Difference ◽  
Resin Modified Glass Ionomer ◽  
Group A ◽  
Nanohybrid Composite ◽  
Group B ◽  
Group D

Aim: To compare the microleakage of Cention N, a subgroup of composite resins with a resin-modified glass ionomer (RMGI) and a composite resin. Methods: Class V cavities were prepared on the buccal and lingual surfaces of 46 extracted human molars. The teeth were randomly assigned to four groups. Group A: Tetric N-Bond etch-and-rinse adhesive and Tetric N-Ceram nanohybrid composite resin, group B: Cention N without adhesive, group C: Cention N with adhesive, and group D: Fuji II LC RMGI. The teeth were thermocycled between 5°-55°C (×10,000). The teeth were coated with two layers of nail vanish except for 1 mm around the restoration margins, and immersed in 2% methylene blue (37°C, 24 h) before buccolingual sectioning to evaluate dye penetration under a stereomicroscope (×20). The data were analyzed by the Kruskal-Wallis and Wilcoxon tests (α=0.05). Results: Type of material and restoration margin had significant effects on the microleakage (p<0.05). Dentin margins showed a higher leakage score in all groups. Cention N and RMGI groups showed significant differences at the enamel margin (p=0.025, p=0.011), and for the latter group the scores were higher. No significant difference was found at the dentin margins between the materials except between Cention N with adhesive and RMGI (p=0.031). Conclusion: Microleakage was evident in all three restorative materials. Cention N groups showed similar microleakage scores to the composite resin and displayed lower microleakage scores compared with RMGI.

scholarly journals Pengaruh kopi arabika terhadap perubahan warna resin komposit hybrid

e-GIGI ◽  
2017 ◽  
Vol 5 (1) ◽  
Author(s):  
Style V. Sirang ◽  
P. S. Anindita ◽  
. Juliatri
Keyword(s):  
Hybrid Composite ◽  
Composite Resin ◽  
Composite Resins ◽  
Control Group ◽  
Control Group Design ◽  
Arabica Coffee ◽  
Group Design ◽  
Hybrid Type ◽  
Post Test ◽  
One Way Anova

Abstract: Composite resin is one of the restorations used in the field of dentistry due to its good esthetic property. To date, the most commonly used composite resin is the hybrid type. Its weakness is the nature of fluid absorbance that can change its color. This discoloration can caused inter alia by food and beverage consumption. Arabica coffee is mostly consumed by our society, however, it has deposit of chlorogenic acid that might cause discoloration. This study was aimed to assess the influence of arabica coffee to the discoloration of hybrid composite resins. This was a true experimental study with a pre test and post test only control group design. Total samples were 24 composite resins of hybrid type (diameter 5 mm and height 2 mm). Each treatment group consisted of 6 samples. The samples were divided into 4 treatment groups, as follows: 0 day, 3 days, 5 days, and 7 days of immersion in arabica coffee solution. The one-way anova test showed that the influence of arabica coffee solution to discoloration of composite resins was significant (p=0.00). Conclusion: There was a significant influence of the duration of immersion in arabica coffee to discoloration of hybrid composite resinsKeywords: resin composite, discoloration, arabica coffee Abstrak: Resin komposit merupakan salah satu bahan restorasi yang sering digunakan di bidang kedokteran gigi karena memiliki nilai estetik yang baik. Saat ini jenis resin komposit yang sering digunakan yaitu resin komposit tipe hybrid. Resin komposit memiliki kekurangan yaitu sifat absorbansi cairan yang dapat menyebabkan perubahan warna. Salah satu penyebab perubahan warna yaitu makanan dan minuman. Kopi arabika merupakan minuman yang sering dikonsumsi oleh masyarakat dan memiliki kandungan asam klorogenik yang dapat memengaruhi perubahan warna. Penelitian ini bertujuan untuk mengetahui pengaruh kopi arabika terhadap perubahan warna resin komposit hybrid. Jenis penelitian ialaj eksperimental murni dengan pre test dan post test only control group design. Jumlah sampel penelitian yaitu 24 resin komposit tipe hybrid dengan ukuran diameter 5 mm dan tinggi 2 mm, dibagi dalam tiga kelompok. Masing-masing kelompok perlakuan terdiri dari 6 sampel. Sampel dibagi menjadi 4 kelompok yaitu kelompok perlakuan 0 hari, 3 hari, 5 hari, dan 7 hari perendaman dalam larutan kopi arabika. Hasil analisis data dengan uji one way Anova menunjukkan adanya pengaruh kopi arabika terhadap perubahan warna resin komposit (p=0,00). Simpulan: Terdapat pengaruh bermakna dari lama perendaman dalam kopi arabika terhadap perubahan warna resin komposit hybrid. Kata kunci : resin komposit, perubahan warna, kopi arabika

scholarly journals PERBEDAAN KEKERASAN PERMUKAAN BAHAN RESTORASI RESIN KOMPOSIT NANOFILLER YANG DIRENDAM DALAM MINUMAN RINGAN BERKARBONASI DAN MINUMAN BERALKOHOL

2016 ◽  
Vol 4 (1) ◽  
pp. 55-66
Author(s):  
Nurul Ikhsan ◽  
Nila Kasuma ◽  
Didin Kustantiningtyastuti
Keyword(s):  
Data Analysis ◽  
Composite Resin ◽  
Resin Composite ◽  
Soft Drink ◽  
Surface Hardness ◽  
Hardness Test ◽  
Alcoholic Beverages ◽  
Control Group ◽  
Control Group Design ◽  
Post Test

Resin composite is dental material filling that is commonly used in dentistry which has good physical properties, mechanical and aesthetics. The properties that have an important role in the resistance of the composite resin surface hardness which directly involved when contact with food, drink and salivary. The purpose of this research is to evaluate the effect of carbonated soft drink and alcoholic beverages on the surface hardness of nanofiller composite resin.The method used in this research is post test only control group design. Samples were made using the mold made of stainless steel, with diameter of 6mm and tick of 2mm, composite was manipulated according to the manufacture’s instructions, and then immersed in aquades, carbonated soft drink and alcoholic beverages for 18 hours in a temperature of 37ºC. Samples were tested using Vickers Hardness Test. Data analysis using Kruskal-Walis test.The result show that the nanofiller composite resin which immersed in alcoholic beverages has higher surface (81,04±10,44 VHN), whreas the composite which immersed in aquades and carbonated soft drink has the surface hardness (70,20±16,6 dan71,10±15,96 VHN). The result of data analysis showed that the data are not distributed normally and showed a significant value of p>0,05. From this research can be concluded that there is no significant differences in surface hardness of nanofiller composite resin which immersed in carbonated soft drink and alcoholic beverages. Keywords: Resin Komposit, nanofiller, surface hardness, mechanical properties.

scholarly journals Efek perendaman rebusan Daun Sirih Merah (Piper crocatum) terhadap kekerasan permukaan resin komposit

2016 ◽  
Vol 2 (2) ◽  
pp. 60
Author(s):  
Devi Puspita Handayani ◽  
Dewi Puspitasari ◽  
Nurdiana Dewi
Keyword(s):  
Composite Resin ◽  
Surface Hardness ◽  
Control Group ◽  
Mouth Rinse ◽  
Control Group Design ◽  
Treatment Groups ◽  
Betel Leaf ◽  
Post Test ◽  
Post Hoc ◽  
One Way Anova

The effect of immersion of decoction water of Red Betel Leaf (Piper crocatum) on the surface hardness of composite resin. The purpose of this study was to determine the effect of immersion of decoction water of red betel leaf on the surface hardness of composite resin compared to alcoholic mouth rinse. It was a pure experimental study with post-test only with control group design. The total samples were 27 samples divided into 2 treatment groups and 1 control group, each of which consisted of 9 samples. The treatment groups were immersed in the decoction water of red betel leaf and alcoholic mouth rinse. The control group was immersed in aquadest. After the immersion, the samples were measured using Vickers Micro hardness Tester. Analysis with one way anova and post hoc Bonferroni showed a significant difference (p<0.05) on the surface hardness of composite resin after being immersed in decoction water of red betel leaf(79,81±3,76) kg/mm2 and alcoholic mouth rinse (67,11±2,51) kg/mm2. Based on this research, it can be concluded that there was an effect of immersion of decoction water of red betel leaf if compared with alcoholic mouth rinse. The value of surface hardness of composite resin immersed in alcoholic mouth rinse was lower than the decoction water of red betel leaf.ABSTRAKPenelitian ini bertujuan untuk mengetahui efek perendaman dalam rebusan daun sirih merah terhadap kekerasan permukaan resin komposit bila dibandingkan dengan obat kumur beralkohol. Penelitian ini merupakan penelitian eksperimental murni dengan post-test only with control group design. Jumlah sampel sebanyak 27 yang dibagi dalam 2 kelompok perlakuan dan 1 kelompok kontrol dengan masing-masing kelompok sebanyak 9 sampel. Kelompok perlakuan direndam dengan air rebusan daun sirih merah dan obat kumur beralkohol. Kelompok kontrol direndam dengan akuades steril. Setelah itu dilakukan pengukuran menggunakan Vickers Microhardness Tester. Hasil uji One Way Anova dan Post Hoc Bonferroni menunjukkan bahwa terdapat perbedaan bermakna nilai kekerasan permukaan resin komposit yang direndam dengan air rebusan daun sirih merah (79,81±3,76) kg/mm2 dan obat kumur beralkohol (67,11±2,51) kg/mm2 dengan nilai kemaknaan (p<0,05). Berdasarkan penelitian yang dilakukan dapat diambil kesimpulan bahwa terdapat efek lebih rendah pada perendaman dalam rebusan daun sirih merah terhadap kekerasan permukaan resin komposit bila dibandingkan dengan obat kumur beralkohol. Nilai kekerasan permukaan resin komposit yang direndam obat kumur beralkohol lebih rendah dibandingkan air rebusan daun sirih merah.

scholarly journals TINGKAT KEKERASAN PERMUKAAN RESIN KOMPOSIT AKIBAT MASA KEDALUWARSA MATERIAL

2018 ◽  
Vol 5 (1) ◽  
pp. 45
Author(s):  
Yuvika Intan Ristian Putri ◽  
Muhammad Dian Firdausy ◽  
Niluh Ringga Woroprobosari
Keyword(s):  
Surface Hardness ◽  
Composite Resins ◽  
Control Group ◽  
Expiration Date ◽  
Control Group Design ◽  
Expiry Date ◽  
Post Test ◽  
Experimental Laboratory ◽  
Post Hoc ◽  
One Way Anova

Background: Aplication of composites resin in relatively small amount as a restorative material often causing the material reaches its expiry date before all of the material can be used. Composites resin that have passed the expiry date would affect charateristic of the material. The aim of this study was to investigate surface hardness difference of composite resins based on material expiration date.Methods: This research was an experimental laboratory using post test only with control group design. Samples for this research were 27 divided into 3 groups based on its expiration date (2016, 2018 and 2019). The surface hardness was measured by Shore D Hardness. The result of this research were tested with One Way Anova and Post Hoc test LSD.Result: The lowest surface hardness result was measured on group 1 (81.02SHD) and the highest was group 3 (94.72 SHD). The result of One Way Anova test showed that there was signifcant differences in all groups (p<0.05). Post Hoc LSD test showed difference signifcantly between each groups.Conclusion: It can be concluded that there was signifcant difference of composite resins surface hardness based on material’s expiration date

Sign in / Sign up

Export Citation Format

Share Document