scholarly journals IMPACT OF NEODYMIUM AND SCANDIUM IONIC RADII ON SORPTION DYNAMICS OF AMBERLITE IR120 AND AB-17-8 REMOTE INTERACTION

2021 ◽  
pp. 26-41
Author(s):  
T.K. Jumadilov ◽  
◽  
Kh. Khimersen ◽  
R.G. Kondaurov ◽  
A.M. Imangazy ◽  
...  
Keyword(s):  
Research Work ◽  
Atomic Emission ◽  
Sorption Process ◽  
Extraction Rate ◽  
Molar Ratio ◽  
Ion Exchangers ◽  
Ionic Radii ◽  
Remote Interaction ◽  
Neodymium Sulfate ◽  
Exchange Resins

The aim of this research work is comparative study of influence of ionic radii of heavy metal ions of neodymium and scandium on their sorption process from corresponding water solutions of sulfates by sorbents such as individual ion-exchangers Amberlite IR120, AB-17-8 and mixture of these sorbents related to interpolymer system Amberlite IR120-AB-17-8 at the various molar relations. Laboratory experiments of this work of sorption heavy ions of neodymium and scandium were carried out and inves-tigated by using the following physico-chemical methods of analysis: conductometry-based on the electrical conductor, pH-metry-based on the concentration of hydrogen ions, colorimetry, atomic-emission spectro-scopy. Ion-exchangers in the interpolymer system undergo remote interaction with further transition into highly ionized state. There is formation of optimal conformation in structure of the initial ion- exchangers. Significant increase of ionization of the ion-exchange resins occurs at molar ratio Amberlite IR120:AB-17-8 = 5:1. Significant increase of sorption properties is observed at this ratio due to mutual activation of ion-exchangers. The extraction rate of Nd3+ ions in 48 hours is 42.32%, and the extraction rate of Sc3+ ions is 38.06%. A possible reason for higher sorption of neodymium ions in comparison with scandium ions is maximum conformity of globes of internode links of Amberlite IR120 and AB-17-8 after activation to sizes of neodymium sulfate in an aqueous medium.

scholarly journals Impact of Neodymium and Scandium Ionic Radii on Sorption Dynamics of Amberlite IR120 and AB-17-8 Remote Interaction

Materials ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5402
Author(s):  
Talkybek Jumadilov ◽  
Bakytgul Totkhuskyzy ◽  
Zamira Malimbayeva ◽  
Ruslan Kondaurov ◽  
Aldan Imangazy ◽  
...  
Keyword(s):  
Atomic Emission ◽  
Sorption Process ◽  
Sorption Properties ◽  
Molar Ratio ◽  
Ion Exchangers ◽  
Ionic Radii ◽  
Average Growth ◽  
Optimal Conformation ◽  
Neodymium Sulfate ◽  
Exchange Resins

The aim of the work is to provide a comparative study of influence of ionic radii of neodymium and scandium ions on their sorption process from corresponding sulfates by individual ion exchangers Amberlite IR120, AB-17-8 and interpolymer system Amberlite IR120-AB-17-8. Experiments were carried out by using the following physicochemical methods of analysis: conductometry, pH-metry, colorimetry, and atomic-emission spectroscopy. Ion exchangers in the interpolymer system undergo remote interactions with a further transition into highly ionized state. There is the formation of optimal conformation in the structure of the initial ion exchangers. A significant increase of ionization of the ion-exchange resins occurs at molar ratio of Amberlite IR120:AB-17-8 = 5:1. A significant increase of sorption properties is observed at this ratio due to the mutual activation of ion exchangers. The average growth of sorption properties in interpolymer system Amberlite IR120:AB-17-8 = 5:1 is over 90% comparatively to Amberlite IR120 and almost 170% comparatively to AB-17-8 for neodymium ions sorption; for scandium ions sorption the growth is over 65% comparatively to Amberlite IR120 and almost 90% comparatively to AB-17-8. A possible reason for higher sorption of neodymium ions in comparison with scandium ions is maximum conformity of globes of internode links of Amberlite IR120 and AB-17-8 after activation to sizes of neodymium sulfate in an aqueous medium.

scholarly journals Effective Sorption of Europium Ions by Interpolymer System Based on Industrial Ion-Exchanger Resins Amberlite IR120 and AB-17-8

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3837
Author(s):  
Talkybek Jumadilov ◽  
Khuangul Khimersen ◽  
Zamira Malimbayeva ◽  
Ruslan Kondaurov
Keyword(s):  
Atomic Emission ◽  
Exchange Capacity ◽  
Sorption Properties ◽  
Strong Increase ◽  
Ion Exchangers ◽  
Molar Ratios ◽  
Remote Interaction ◽  
Exchange Resins ◽  
The Impact ◽  
Interaction Phenomenon

The research is aimed at checking the impact of a remote interaction phenomenon on growth of sorption properties of ion-exchange resins during sorption of europium ions. Industrial ion exchangers Amberlite IR120 and AB-17-8 were selected as objects for the study. Investigation was undertaken using the following physico-chemical methods of analysis: conductometry, pH-metry, colorimetry, Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and atomic emission spectroscopy. Remote interaction of the initial ion exchangers in the interpolymer system leads to their transition into highly ionized state due to formation of optimal conformation. Found that high ionization areas of Amberlite IR120 and AB-17-8 are the molar ratios Amberlite IR120:AB-17-8 = 4:2 and 1:5. The remote interaction effect provides significant increase of the following sorption properties: sorption degree, polymer chain binding degree, effective dynamic exchange capacity. A strong increase of the sorption properties (average increase for all time of remote interaction is over 50%) in the interpolymer system Amberlite IR120-AB-17-8 was observed with individual polymer structures of Amberlite IR120 and AB-17-8. The remote interaction phenomenon can be successfully used for effective modification of industrial ion exchangers for sorption of rare-earth metals.

scholarly journals Ion Exchange Dynamics in Cerium Nitrate Solution Regulated by Remotely Activated Industrial Ion Exchangers

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3491
Author(s):  
Talkybek Jumadilov ◽  
Laila Yskak ◽  
Aldan Imangazy ◽  
Oleg Suberlyak
Keyword(s):  
Rare Earth ◽  
Ion Exchange ◽  
Nitrate Solution ◽  
Atomic Emission ◽  
Molar Ratio ◽  
Ion Exchangers ◽  
Ionization Degree ◽  
Emission Analysis ◽  
Molar Ratios ◽  
Remote Interaction

Many technological solutions contain valuable components as waste and can become an additional source of rare-earth elements to meet the needs of modern production. The development of technologies based on commercially available and cheap sorbents reveals the possibility for rare earth recovery from various solutions. This paper provides research on using a combination of KU-2-8 and AV-17-8 ion exchangers in different molar ratios for cerium ions sorption from its nitrate solution. The mutual activation of the ion exchangers in an aqueous medium provides their transformation into a highly ionized state by the conformational and electrochemical changes in properties during their remote interaction. The ion exchange dynamics of solutions were studied by the methods of electrical conductivity, pH measurements, and atomic emission analysis of the solutions. The research showed that the maximum activation of polymers was revealed within the molar ratio of KU-2-8:AV-17-8 equal to 3:3. In more detail, in comparison to AV-17-8, this interpolymer system showed an increase in the sorption degree by more than 1.5 times after 6 h of interaction. Moreover, compared with KU-2-8, the same interpolymer system showed an increase in the degree of cerium ions sorption by seven times after 24 h of interaction. As a result, the total cerium ions sorption degree after 48 h of sorption by individual KU-2-8 and AV-17-8 was 38% and 44%, respectively, whereas the cerium ions sorption degree by the same interpolymer system in the molar ratio 3:3 became 51%. An increase in the sorption degree of cerium ions by the interpolymer system in comparison with individual ion exchangers can be explained by the achievement of a high ionization degree of ion exchangers being activated in the interpolymer system by the remote interaction effect.

scholarly journals Phosphorus extracted by ion exchange resins and mehlich-1 from oxisols (latosols) treated with different phosphorus rates and sources for varied soil-source contact periods

2013 ◽  
Vol 37 (3) ◽  
pp. 667-677 ◽  
Author(s):  
Irio Fernando de Freitas ◽  
Roberto Ferreira Novais ◽  
Ecila Mercês de Albuquerque Villani ◽  
Sarah Vieira Novais
Keyword(s):  
Sandy Loam ◽  
Extraction Methods ◽  
Available P ◽  
Molar Ratio ◽  
P Availability ◽  
Triple Superphosphate ◽  
Experimental Conditions ◽  
Reactive Phosphate ◽  
Exchange Resins ◽  
P Sources

Despite the large number of studies addressing the quantification of phosphorus (P) availability by different extraction methods, many questions remain unanswered. The aim of this paper was to compare the effectiveness of the extractors Mehlich-1, Anionic Resin (AR) and Mixed Resin (MR), to determine the availability of P under different experimental conditions. The laboratory study was arranged in randomized blocks in a [(3 x 3 x 2) + 3] x 4 factorial design, with four replications, testing the response of three soils with different texture: a very clayey Red Latosol (LV), a sandy clay loam Red Yellow Latosol (LVA), and a sandy loam Yellow Latosol (LA), to three sources (triple superphosphate, reactive phosphate rock from Gafsa-Tunisia; and natural phosphate from Araxá-Minas Gerais) at two P rates (75 and 150 mg dm-3), plus three control treatments (each soil without P application) after four contact periods (15, 30, 60, and 120 days) of the P sources with soil. The soil acidity of LV and LVA was adjusted by raising base saturation to 60 % with the application of CaCO3 and MgCO3 at a 4:1 molar ratio (LA required no correction). These samples were maintained at field moisture capacity for 30 days. After the contact periods, the samples were collected to quantify the available P concentrations by the three extractants. In general, all three indicated that the available P-content in soils was reduced after longer contact periods with the P sources. Of the three sources, this reduction was most pronounced for triple superphosphate, intermediate for reactive phosphate, while Araxá phosphate was least sensitive to the effect of time. It was observed that AR extracted lower P levels from all three soils when the sources were phosphate rocks, while MR extracted values close to Mehlich-1 in LV (clay) and LVA (medium texture) for reactive phosphate. For Araxá phosphate, much higher P values were determined by Mehlich-1 than by the resins, because of the acidity of the extractor. For triple superphosphate, both resins extracted higher P levels than Mehlich-1, due to the consumption of this extractor, particularly when used for LV and LVA.

scholarly journals Application of the Remote Interaction Effect and Molecular Imprinting in Sorption of Target Ions of Rare Earth Metals

Polymers ◽  
2022 ◽  
Vol 14 (2) ◽  
pp. 321
Author(s):  
Talkybek Jumadilov ◽  
Ruslan Kondaurov ◽  
Aldan Imangazy
Keyword(s):  
Molecularly Imprinted Polymers ◽  
Atomic Emission ◽  
Model Solution ◽  
Sorption Properties ◽  
Molecularly Imprinted ◽  
Imprinted Polymers ◽  
Selective Sorption ◽  
Molar Ratios ◽  
Maximum Sorption ◽  
Remote Interaction

The goal of the present work is a comparative study of the effectiveness of the application of intergel systems and molecularly imprinted polymers for the selective sorption and separation of neodymium and scandium ions. The following physico-chemical methods of analysis were used in this study: colorimetry and atomic-emission spectroscopy. The functional polymers of polyacrylic acid (hPAA) and poly-4-vinylpyridine (hP4VP) in the intergel system undergo significant changes in the initial sorption properties. The remote interaction of the polymers in the intergel system hPAA–hP4VP provides mutual activation of these macromolecules, with subsequent transfer into a highly ionized state. The maximum sorption of neodymium and scandium ions is observed at molar ratios of 83%hPAA:17%hP4VP and 50%hPAA:50%hP4VP. Molecularly imprinted polymers MIP(Nd) and MIP(Sc) show good results in the sorption of Nd and Sc ions. Based on both these types of these macromolecular structures, principally new sorption methods have been developed. The method based on the application of the intergel system is cheaper and easier in application, but there is some accompanying sorption (about 10%) of another metal from the model solution during selective sorption and separation. Another method, based on the application of molecularly imprinted polymers, is more expensive and the sorption properties are higher, with the simultaneous sorption of the accompanying metal from the model solution.

scholarly journals Removal of Hexavalent Chromium Ions from Aqueous Solutions by an Anion-Exchange Resin

2008 ◽  
Vol 26 (9) ◽  
pp. 693-703 ◽  
Author(s):  
P. Senthil Kumar ◽  
K. Kirthika ◽  
K. Sathish Kumar
Keyword(s):  
Aqueous Solutions ◽  
Anion Exchange ◽  
Hexavalent Chromium ◽  
Exchange Resin ◽  
Ph Value ◽  
Anion Exchange Resin ◽  
Freundlich Isotherm ◽  
Sorption Process ◽  
Isotherm Models ◽  
Exchange Resins

The removal of hexavalent chromium, Cr(VI), from aqueous solutions under different conditions using an anion-exchange resin (AXR) as an adsorbent was investigated under batch conditions. Such studies indicated that the percentage adsorption decreased with increasing initial Cr(VI) concentration, with the maximum removal of such ions occurred at a pH value of ca. 2.0. Both the Langmuir and Freundlich isotherm models were capable of reproducing the isotherms obtained experimentally. The sorption process was rapid during the first 20 min with equilibrium being attained within 30 min. The process followed first-order kinetics. The results demonstrate that such anion-exchange resins can be used for the efficient removal of Cr(VI) ions from water and wastewater.

scholarly journals Initial Investigation into the Leaching of Manganese from Nodules at Room Temperature with the Use of Sulfuric Acid and the Addition of Foundry Slag—Part I

Minerals ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 565 ◽  
Author(s):  
Norman Toro ◽  
Nelson Herrera ◽  
Jonathan Castillo ◽  
Cynthia Torres ◽  
Rossana Sepúlveda
Keyword(s):  
Particle Size ◽  
Sulfuric Acid ◽  
Acid Concentration ◽  
Room Temperature ◽  
Sulfuric Acid Concentration ◽  
Extraction Rate ◽  
Molar Ratio ◽  
Independent Variables ◽  
Initial Investigation ◽  
Optimization Methodology

In this study, the surface optimization methodology was used to assess the effect of three independent variables—time, particle size and sulfuric acid concentration—on Mn extraction from marine nodules during leaching with H2SO4 in the presence of foundry slag. The effect of the MnO2/Fe ratio and particle size (MnO2) was also investigated. The maximum Mn extraction rate was obtained when a MnO2 to Fe molar ratio of 0.5, 1 M of H2SO4, −320 + 400 Tyler mesh (−47 + 38 μm) nodule particle size and a leaching time of 30 min were used.

Resorcinol-Formaldehyde Resins for Cesium Removal from Solutions Produced after Processing Spent Ion-Exchangers

2020 ◽  
Vol 842 ◽  
pp. 107-114
Author(s):  
Eduard Tokar' ◽  
Marina Palamarchuk ◽  
Mikhail Tutov ◽  
Anna Matskevich ◽  
Andrei Egorin
Keyword(s):  
Chemical Stability ◽  
Contact Time ◽  
Sorption Properties ◽  
Molar Ratio ◽  
Ion Exchangers ◽  
Resorcinol Formaldehyde ◽  
Dynamic Conditions ◽  
Cesium Removal ◽  
Dynamic Sorption ◽  
Short Contact Time

A series of resorcinol-formaldehyde resins (RFR) has been prepared and studied in terms of Cs-137 uptake efficiency from solutions (0.75М NaOH-2.25M NaNO3) intended for processing spent ion-exchangers. Sample synthesized at molar ratio of resorcinol to formaldehyde of 1.8:2.2 and solidified at 210 °C (sample RFR-3-1-210) has shown the best sorption-selective performance and chemical stability. Implementing RFR in dynamic sorption scheme enables to reduce its decay due to short contact time. In dynamic conditions, after feeding 1000 bed volumes of the solution, RFR 3-1-210 maintains its sorption properties after 6 sorption-desorption cycles.

Genetic Algorithm Approach to Optimize Biodiesel Production by Ultrasonic System

2014 ◽  
Vol 9 (1) ◽  
pp. 59-70 ◽  
Author(s):  
Ebrahim Fayyazi ◽  
Barat Ghobadian ◽  
Gholamhassan Najafi ◽  
Bahram Hosseinzadeh
Keyword(s):  
Genetic Algorithm ◽  
Catalyst Concentration ◽  
Ultrasonic Method ◽  
Research Work ◽  
Optimization Method ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Genetic Algorithm Approach ◽  
Mixing Method

Abstract Ultrasonic processing is an effective tool to attain required mixing while providing the necessary activation energy in the field of biofuels. In this regard, optimization of fast transesterification of waste cooking oil is very important. The goal of this research paper is therefore to determine the effect of important parameters such as methanol to oil molar ratio, catalyst concentration (potassium hydroxide), temperature, and horn position on oil conversion to methyl ester in ultrasonic mixing method. Result of experiments showed that the optimum conditions for the transesterification process have been obtained as molar ratio of alcohol to oil as 6:1, catalyst concentration of 1 wt.%, temperature as 45°C, and horn position at the interface of methanol to oil. The results show that the ultrasonic method decreases the reaction time as much as up to eight times compare to the conventional stirring. For practically evaluating the theoretical optimum point using genetic algorithm, the obtained values were verified experimentally. In order to perform this, the catalyst concentration, temperature, and the time of reaction were determined, and the values are 1%, 48°C, and 449s, respectively. For the obtained values, the biodiesel conversion was 93.2%, so that the experimental optimum value is closed to that of the theoretical values. As a result, experimental data confirmed the obtained values from optimization method in this research work.

Evaluation of the tribological properties and oxidative stability of epoxidized and ring opened products of pure rice bran oil

2020 ◽  
pp. 135065012095053
Author(s):  
Ananthan D Thampi ◽  
Abhishek R John ◽  
M Muhammed Arif ◽  
S Rani
Keyword(s):  
Hydrogen Peroxide ◽  
Vegetable Oils ◽  
Rice Bran ◽  
Rice Bran Oil ◽  
Research Work ◽  
Viscosity Index ◽  
Oxidation Stability ◽  
High Viscosity ◽  
Molar Ratio ◽  
Four Levels

Vegetable oils constitute a potential base stock for bio-lubricants, which has good biodegradability, high flash point, high viscosity index and excellent boundary lubrication properties. They also possess some limitations like low thermal and oxidation stability, poor low temperature properties and narrow range of viscosities. These limitations can be altered by modifying the vegetable oils chemically or by providing additives into the oils. This research work focused on the chemical modification of pure rice bran oil by epoxidation process using 30% hydrogen peroxide and glacial acetic acid. The epoxidized rice bran oil was then subjected to ring opening process using butanoic acid. The epoxidation process was optimized with four factors (Temperature, Time, Weight % of Catalyst, Hydrogen Peroxide molar ratio), each factors having four levels. The lubricant properties of pure rice bran oil (RBO), epoxidized rice bran oil (ERBO) and ring opened rice bran oil (RRBO) were studied. It was noted that the lubricant properties of ERBO and RRBO were better compared to pure RBO.

Sign in / Sign up

Export Citation Format

Share Document