scholarly journals Change Character of Electric Conductive Properties of Weeds Plants Tissue at Electric Impulse Damage

2021 ◽  
Vol 57 (5) ◽  
pp. 78-87
Author(s):  
I.V. Yudaev ◽  
◽  
Yu.V. Daus ◽  
Keyword(s):  
Plant Tissue ◽  
Experimental Studies ◽  
Electrical Energy ◽  
High Tech ◽  
Low Frequencies ◽  
Practical Applications ◽  
Energy Supply System ◽  
Electrical Impulse ◽  
Tissue Resistance ◽  
Electric Impulse

Currently, in order to obtain pre-planned results and increase the efficiency of using existing technologies, electrotechnological operations are applied in the processes of agricultural production, food and processing industries, including those that implement the effects of high voltage impulses. One of such promising technologies in agriculture can be considered to be electric impulse weeding that is the fight against unwanted and weed vegetation. Such operation, which is carried out with high rates of technological efficiency, is environmentally friendly and refers to high-tech processes. For practical applications and technical implementations, it is necessary to study various properties and parameters of effected objects – weeds. The partial dependence of the electrical resistance of the plant tissue or the dispersion of resistance over the frequency of the measuring current was decided to be used as the studied characteristic. This approach allows to consider weeds not only as a load with which the electrical energy supply system is in contact but also to thoroughly study how this resistance changes during processing. The conducted experimental studies made it possible to clarify the nature of the change in resistance under the damage process to plant tissue, as well as to estimate the quantitative indicators of both the energy absorbed by the plant tissue and the ranges of variations of its resistance. The change character in the plant tissue resistance at the process of the electrical impulse damage remains unchanged, only the resistance value at low frequencies decreases. The total damage corresponds to the period of processing when the resistance of the plant tissue is practically equal at low and high frequencies. This behavior of the mentioned parameter is typical for internal and surface tissues of weeds, as well as for their root systems and leaf-stem parts. Theoretical verification of the change character in the plant tissue resistance of destroyed weeds confirmed the description of the proposed mechanism of change in resistance in the process of irreversible electrical impulse damage.

EXPERIMENTAL STUDIES OF CAR PROPERTIES ON A PHYSICAL MODEL

2019 ◽  
pp. 10-16
Author(s):  
Oleksii Timkov ◽  
Dmytro Yashchenko ◽  
Volodymyr Bosenko
Keyword(s):  
Mathematical Model ◽  
Remote Control ◽  
Physical Model ◽  
Model Experiment ◽  
Experimental Studies ◽  
Electrical Energy ◽  
Short Term ◽  
Motor Current ◽  
Memory Card ◽  
The Mathematical Model

The article deals with the development of a physical model of a car equipped with measuring, recording and remote control equipment for experimental study of car properties. A detailed description of the design of the physical model and of the electronic modules used is given, links to application libraries and the code of the first part of the program for remote control of the model are given. Atmega microcontroller on the Arduino Uno platform was used to manage the model and register the parameters. When moving the car on the memory card saved such parameters as speed, voltage on the motor, current on the motor, the angle of the steered wheel, acceleration along three coordinate axes are recorded. Use of more powerful microcontrollers will allow to expand the list of the registered parameters of movement of the car. It is possible to measure the forces acting on the elements of the car and other parameters. In the future, it is planned to develop a mathematical model of motion of the car and check its adequacy in conducting experimental studies on maneuverability on the physical model. In addition, it is possible to conduct studies of stability and consumption of electrical energy. The physical model allows to quickly change geometric dimensions and mass parameters. In the study of highway trains, this approach will allow to investigate the various layout schemes of highway trains in the short term. It is possible to make two-axle road trains and saddle towed trains, three-way hitched trains of different layout. The results obtained will allow us to improve not only the mathematical model, but also the experimental physical model, and move on to further study the properties of hybrid road trains with an active trailer link. This approach allows to reduce material and time costs when researching the properties of cars and road trains. Keywords: car, physical model, experiment, road trains, sensor, remote control, maneuverability, stability.

Diagnostics of metal samples using the results of experimental and theoretical study of positively charged microparticles formed upon sample destruction

2018 ◽  
Vol 84 (10) ◽  
pp. 23-28
Author(s):  
D. A. Golentsov ◽  
A. G. Gulin ◽  
Vladimir A. Likhter ◽  
K. E. Ulybyshev
Keyword(s):  
Experimental Data ◽  
Early Stage ◽  
Experimental Studies ◽  
Material Model ◽  
Total Charge ◽  
Cross Sectional ◽  
Practical Applications ◽  
Mechanical And Electrical Properties ◽  
Order Of Magnitude ◽  
Using Data

Destruction of bodies is accompanied by formation of both large and microscopic fragments. Numerous experiments on the rupture of different samples show that those fragments carry a positive electric charge. his phenomenon is of interest from the viewpoint of its potential application to contactless diagnostics of the early stage of destruction of the elements in various technical devices. However, the lack of understanding the nature of this phenomenon restricts the possibility of its practical applications. Experimental studies were carried out using an apparatus that allowed direct measurements of the total charge of the microparticles formed upon sample rupture and determination of their size and quantity. The results of rupture tests of duralumin and electrical steel showed that the size of microparticles is several tens of microns, the particle charge per particle is on the order of 10–14 C, and their amount can be estimated as the ratio of the cross-sectional area of the sample at the point of discontinuity to the square of the microparticle size. A model of charge formation on the microparticles is developed proceeding from the experimental data and current concept of the electron gas in metals. The model makes it possible to determine the charge of the microparticle using data on the particle size and mechanical and electrical properties of the material. Model estimates of the total charge of particles show order-of-magnitude agreement with the experimental data.

scholarly journals Modelling of new generation plasma optical devices

Nukleonika ◽  
2016 ◽  
Vol 61 (2) ◽  
pp. 207-212 ◽  
Author(s):  
Irina V. Litovko ◽  
Alexy A. Goncharov ◽  
Andrew N. Dobrovolskiy ◽  
Lily V. Naiko ◽  
Irina V. Naiko
Keyword(s):  
Low Cost ◽  
Rocket Engine ◽  
Cost Effective ◽  
Optical Devices ◽  
High Tech ◽  
Practical Applications ◽  
Plasma Accelerators ◽  
New Generation ◽  
Closed Electron ◽  
Positive Space

Abstract The paper presents new generation plasma optical devices based on the electrostatic plasma lens configuration that opens a novel attractive possibility for effective high-tech practical applications. Original approaches to use of plasma accelerators with closed electron drift and open walls for the creation of a cost-effective low-maintenance plasma lens with positive space charge and possible application for low-cost, low-energy rocket engine are described. The preliminary experimental, theoretical and simulation results are presented. It is noted that the presented plasma devices are attractive for many different applications in the state-of-the-art vacuum-plasma processing.

scholarly journals Metal-Water mixtures for Propulsion and Energy-Conversion Applications: Recent Progress and Future Directions

2018 ◽  
Vol 20 (1) ◽  
pp. 53 ◽  
Author(s):  
Dilip Sundaram
Keyword(s):  
Particle Size ◽  
Energy Conversion ◽  
Experimental Studies ◽  
High Energy ◽  
High Energy Density ◽  
Full Potential ◽  
Predictive Tool ◽  
Practical Applications ◽  
Relative Safety ◽  
Metal Water

The metal-water system is attractive for propulsion and energy-conversion applications. Of all metals, aluminum is attractive due to its high energy density, relative safety, and low cost. Experimental studies provide new insight on the combustion and propulsive behaviors. The burning rate is found to be a strong function of both pressure and particle size. Furthermore, there is a wide scatter in the measured pressure exponents due to differences in particle size, pressure, pH, and equivalence ratio. A major problem with Al/H2O mixtures is incomplete combustion and poor impulses, thereby rendering Al/H2O mixtures unsuitable for practical applications. Efforts to improve the performance of Al/H2O mixtures have only met with moderate success. Although experiments have revealed these new trends, not much is offered in terms of the underlying physics and mechanisms. To explore the combustion mechanisms, theoretical models based on energy balance analysis have been developed. These models involve numerous assumptions and many complexities were either ignored or treated simplistically. The model also relies on empirical inputs, which makes it more a useful guide than a predictive tool. Future works must endeavor to conduct a more rigorous analysis of metal-water combustion. Empirical inputs should be avoided and complexities must be properly treated to capture the essential physics of the problem. The model should help us properly understand the experimental trends, offer realistic predictions for unexplored conditions, and suggest guidelines and solutions in order to realize the full potential of metal-water mixtures.

Effect of magnetic field on viscoelastic wave characteristics

2017 ◽  
Vol 232 (19) ◽  
pp. 3482-3490 ◽  
Author(s):  
Gülen Dilara Günalp ◽  
Cemal Baykara ◽  
Uğur Güven
Keyword(s):  
Magnetic Field ◽  
Attenuation Coefficient ◽  
Transverse Magnetic Field ◽  
Experimental Studies ◽  
Magnetic Field Effect ◽  
Transverse Magnetic ◽  
Magnetic Field Effects ◽  
Low Frequencies ◽  
Remarkable Effect ◽  
Wave Characteristics

In this study, the longitudinal wave characteristics of magnetic field sensitive viscoelastic rods under the transverse magnetic field effect is addressed by including lateral inertia effect. The analysis is based on the Love rod theory. The polymeric rod is modeled as standard linear solid viscoelastic material. The obtained explicit solution is illustrated graphically. The comparative results of the analysis show that the transverse magnetic field has a remarkable effect on the wave phase velocity and attenuation coefficient. The transverse magnetic field especially leads to a significant reduction on attenuation coefficient for high frequencies values and large diameters. The analysis results presented here especially for low frequencies ranges can provide a reliable support for the similar experimental studies in related the magnetic field effects.

A review on recent advances and challenges of ionic wind produced by corona discharges with practical applications

2021 ◽  
Author(s):  
Jingguo Qu ◽  
Minjun Zeng ◽  
Dewei Zhang ◽  
Dakai Yang ◽  
Xiongwei Wu ◽  
...  
Keyword(s):  
Corona Discharge ◽  
Experimental Studies ◽  
Wind Generation ◽  
Future Research ◽  
Discharge Process ◽  
Ionic Wind ◽  
Practical Applications ◽  
Wind Generators ◽  
Wide Range ◽  
Gas Ionization

Abstract Ionic wind, an induced phenomenon during corona discharge, possessing the features of silent operation and no moving parts, has a wide range of applications. Ionic wind generation is accompanied by complex physical processes, involving gas ionization, ion recombination, flow, and various chemical reactions, as well as mutual couplings between some of them. Therefore, understanding the corona discharge process and ionic wind generation is crucial for researchers and engineers to better utilize this phenomenon in practical applications. In this review, the principles of corona discharge and its induced ionic wind are presented. Subsequently, ionic wind generators (IWGs) are discussed according to their applications, and the corresponding advances based on experimental studies and numerical simulations are also reviewed. Moreover, the challenges of transitioning the ionic wind technology from laboratory studies to practical applications are discussed. These challenges include the excessively high onset voltage of the corona, ozone emission, and influence of environmental conditions. Furthermore, the mechanisms of these barriers and several effective approaches for mitigating them are provided. Finally, some future research prospects and the conclusions are presented.

USE OF PHOTOELECTRIC MODULES WITH DOUBLE-SIDED RECEIVING SURFACE FOR SMALL GENERATION UNITS

2021 ◽  
pp. 93-100
Author(s):  
V. V. Kuvshinov ◽  
E. A. Bekirov ◽  
E. V. Guseva
Keyword(s):  
Solar Cells ◽  
Energy Storage ◽  
Solar Energy ◽  
Power Plants ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Experimental Studies ◽  
Electrical Energy ◽  
Photovoltaic Systems ◽  
Energy Storage Systems

In the presented work, the possibility of using photovoltaic silicon panels with a double-sided arrangement of solar cells on the front and back sides is presented. With a lack of space for placing solar panels, these types of modules can significantly increase the generation of electrical energy. Equipping photovoltaic systems with rechargeable batteries contributes to a more rational consumption of electrical energy, while energy storage systems significantly increase the efficiency of solar generating systems. The proposed designs are intended to increase the power characteristics of solar energy converters in the winter months, in the presence of snow or when using reflective surfaces on road surfaces. The results of the experimental studies have shown a significant efficiency of the proposed designs, as well as an increase in the total generation of electrical energy. With the development of the global technical potential and a significant increase in the production of power plants for solar energy, a new opportunity has emerged to use combined solar plants for photovoltaic conversion of the flux of incident solar radiation. At the Department of Renewable Energy Sources and Electrical Systems and Networks at Sevastopol State University, at the site of the Institute of Nuclear Energy and Industry, a photovoltaic installation was developed and studied, consisting of two side silicon solar cells and energy storage systems. The article presents the results of experimental and theoretical studies, presents diagrams, drawings and graphs of various characteristics of the FSM-110D photovoltaic panel and storage batteries. The research results show the increased efficiency of the proposed installation, as well as a good possibility of using the presented photovoltaic systems to provide them with autonomous and individual consumers living in the Crimean region and the city of Sevastopol.

Towards an Inclusive Walk-in Customer Service Facility

2016 ◽  
pp. 525-544 ◽  
Author(s):  
Tiago Cinto
Keyword(s):  
Customer Service ◽  
Electrical Energy ◽  
World Health ◽  
High Tech ◽  
Service Facility ◽  
Service Channel ◽  
Utility Company ◽  
Digital Environments ◽  
Self Service ◽  
Health Organization

It is estimated that 15% of the world's population has some sort of physical or sensory disability, according to the World Health Organization (2011). In an era marked by the rising of new technological devices, the inclusion of this public in digital environments still faces many obstacles, what frequently lets it out of this informational society. In this sense, Companhia Energética de Minas Gerais – CEMIG, one of the biggest Brazilian electrical energy utility company, has started to design and deploy a high-tech, user-friendly, inclusive customer service facility aimed at rendering a wide range of services by means of several gadgets such as self-service kiosks, tablets, and interactive panels and tables to help address the digital divide. For doing so, the applications to be developed and run on those devices need to be carefully studied and previously tested in order to meet the needs and expectations of the target audience. This paper describes the process of designing these innovative solutions to meet the demands of this new service channel.

Theoretical and experimental studies of a piezoelectric ring energy harvester

2019 ◽  
Vol 30 (7) ◽  
pp. 998-1009 ◽  
Author(s):  
XF Zhang ◽  
HS Tzou
Keyword(s):  
Energy Harvesting ◽  
Power Output ◽  
Output Voltage ◽  
Laboratory Experiments ◽  
Electromechanical Coupling ◽  
Energy Harvester ◽  
Experimental Studies ◽  
Design Parameters ◽  
Resistive Load ◽  
Practical Applications

Based on the electromechanical coupling of piezoelectricity, a piezoelectric ring energy harvester is designed and tested in this study, such that the harvester can be used to power electric devices in the closed-circuit condition. Output energies across the external resistive load are evaluated when the ring energy harvester is subjected to harmonic excitations, and various design parameters are discussed to maximize the power output. In order to validate the theoretical energy harvesting results, laboratory experiments are conducted. Comparing experiment results with theoretical ones, the errors between them are under 10% for the output voltage. Laboratory experiments demonstrate that the ring energy harvester is workable in practical applications.

QUANTUM 1/f EFFECT BASED ON QUANTUM INFORMATION THEORY

2006 ◽  
Vol 20 (11n13) ◽  
pp. 1343-1362 ◽  
Author(s):  
THOMAS F. GEORGE ◽  
PETER H. HANDEL
Keyword(s):  
Information Theory ◽  
Quantum Information ◽  
Dynamical Evolution ◽  
Conditional Entropy ◽  
Quantum Information Theory ◽  
High Tech ◽  
Theory Approach ◽  
Apparent Lack ◽  
Practical Applications ◽  
Entropy Increase

The Quantum Information Theory Approach (QIT) explains for the first time the apparent lack of unitarity caused by the entropy increase in the Quantum 1/f Effect (Q1/fE). This allows for a deeper understanding of the quantum 1/f effect, showing no resultant entropy increase and therefore no violation of unitarity in the quantum-mechanical dynamical evolution. This new interpretation involves the von Neumann Quantum Entropy, including the negative conditional entropy concept for quantum entangled states introduced by QIT. The Q1/fE was applied to many high-tech systems, in particular to ultra small electronic devices in nanotechnology. The present paper explains how the additional entropy implied by the observed 1/f noise arises in spite of the entropy-conserving evolution of the system. On this basis, a derivation of the conventional and coherent quantum 1/f effect is given. The latter is derived from a non-relativistic form of the branch-point propagator derived by excluding the long range Coulomb interaction from the interaction hamiltonian. The paper concludes with examples of practical applications in various devices and systems, allowing for a new characterization of high technology.

Sign in / Sign up

Export Citation Format

Share Document