scholarly journals Evaluating Pfeiffer Chromatography for Its Validation as an Indicator of Soil Quality

2020 ◽  
Vol 8 (3) ◽  
pp. 420
Author(s):  
Igor Graciano ◽  
Leopoldo Sussumu Matsumoto ◽  
Gilberto Bueno Demétrio ◽  
Erika Cosendey Toledo Mello Peixoto
Keyword(s):  
Production Systems ◽  
Sodium Hydroxide Solution ◽  
Low Cost ◽  
Central Zone ◽  
Principal Component ◽  
Quality Standard ◽  
Soil Extract ◽  
Soil Monitoring ◽  
Internal Medium ◽  
Physical Chemical

Soil monitoring is fundamental to promote sustainability agroecosystems. It is necessary to consider indicators that bring together biological, physical, chemical and inter-relational attributes. Pfeiffer chromatography (PC) represents an important method for soil diagnosis, so the present study aims to analyze it in order to contribute to its validation. The soil samples of 12 production systems were evaluated in quintuplicate. The chromas were elaborated using Whatman no 4 filter paper, and the soil extract was performed by sodium hydroxide solution 1%. The results were obtained using revealing solution (AgNO3 0.5%) ascension by capillarity, and the chrome zones: central, internal, medium and external were correlated to soil penetration, chemical, biological and enzymatic parameters, respectively. Variance analysis was applied to the results that presented normal distribution and the means were compared by Scott-Knott test. T-test for Spearman correlations and principal component analysis were used to evaluate the correlations. There was negative correlation between the central zone and the average penetration resistance within the range 0-40 cm in depth. The internal, medium and external zones presented positive correlation with organic matter, carbon microbial biomass, and enzymatic activities, respectively. Quality standard features such as coloration, size and proportion of zones, presence of enzymatic clouds, peaks and radial lines were also confirmed. Thus, the standardization developed by this study contributed to validation of PC. Since PC is a low-cost and easy-to-perform method, it proves to be a useful tool allowing farmers autonomy to monitoring different agricultural systems, contributing to their production sustainable.

Causes of gear pump fails and methods for their elimination

2020 ◽  
pp. 98-107
Author(s):  
Vitaliy A. Zuyevskiy ◽  
Daniil O. Klimyuk ◽  
Ivan A. Shemberev
Keyword(s):  
Adhesion Strength ◽  
Production Systems ◽  
Low Cost ◽  
High Strength ◽  
Strength Properties ◽  
Research Purpose ◽  
Working Fluid ◽  
Gear Pump ◽  
Repair Service ◽  
Recovery Method

Gear pumps are an important element of many production systems and their replacement in case of failure can be quite expensive, so it is important to have a modern and well-tuned technology for their recovery. There are many methods for restoring the pump's performance, depending on the reason that led to its failure. (Research purpose) The research purpose is in determining what causes most often lead to loss of pump performance, and developing a recovery method that provides the greatest post-repair service life of the pump and low cost of repair. (Materials and methods) Authors took into account that the applied coatings must have sufficient adhesion strength and resistance to mechanical, thermal and corrosion loads during operation. It was found that most often significant leaks of the working fluid, leading to failure, occur due to an increase in the gap between the inner surface of the housing and the gears due to active wear of the housing wells. Authors determined that the method of electric spark treatment of worn-out housing wells is best suited to perform the task (a large post-repair resource and low costs). (Results and discussion) It was found by laboratory studies of the adhesion strength of electric spark coatings with various electrodes that the best transfer of the material to the substrate is provided by bronze electrodes BrMKts3-1. It was noted that the coatings applied using the BrMKts3-1 electrode have high strength properties. (Conclusions) Research conducted in the center for collective use "Nano-Center" VIM confirmed the possibility of effective recovery of the gear pump by electric spark treatment.

scholarly journals Evaluation of indigenous aromatic rice cultivars from sub-Himalayan Terai region of India for nutritional attributes and blast resistance

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Debayan Mondal ◽  
Prudveesh Kantamraju ◽  
Susmita Jha ◽  
Gadge Sushant Sundarrao ◽  
Arpan Bhowmik ◽  
...  
Keyword(s):  
Nutritive Value ◽  
Amylose Content ◽  
Blast Resistance ◽  
Starch Content ◽  
Low Cost ◽  
Principal Component ◽  
Blast Disease ◽  
Basmati Rice ◽  
Phenotypic Traits ◽  
Rice Cultivars

AbstractIndigenous folk rice cultivars often possess remarkable but unrevealed potential in terms of nutritional attributes and biotic stress tolerance. The unique cooking qualities and blissful aroma of many of these landraces make it an attractive low-cost alternative to high priced Basmati rice. Sub-Himalayan Terai region is bestowed with great agrobiodiversity in traditional heirloom rice cultivars. In the present study, ninety-nine folk rice cultivars from these regions were collected, purified and characterized for morphological and yield traits. Based on traditional importance and presence of aroma, thirty-five genotypes were selected and analyzed for genetic diversity using micro-satellite marker system. The genotypes were found to be genetically distinct and of high nutritive value. The resistant starch content, amylose content, glycemic index and antioxidant potential of these genotypes represented wide variability and ‘Kataribhog’, ‘Sadanunia’, ‘Chakhao’ etc. were identified as promising genotypes in terms of different nutritional attributes. These cultivars were screened further for resistance against blast disease in field trials and cultivars like ‘Sadanunia’, ‘T4M-3-5’, ‘Chakhao Sampark’ were found to be highly resistant to the blast disease whereas ‘Kalonunia’, ‘Gobindabhog’, ‘Konkanijoha’ were found to be highly susceptible. Principal Component analysis divided the genotypes in distinct groups for nutritional potential and blast tolerance. The resistant and susceptible genotypes were screened for the presence of the blast resistant pi genes and association analysis was performed with disease tolerance. Finally, a logistic model based on phenotypic traits for prediction of the blast susceptibility of the genotypes is proposed with more than 80% accuracy.

Identification of cavitation in centrifugal pump by artificial immune network

2021 ◽  
pp. 095440892110284
Author(s):  
Seyed M Matloobi ◽  
Mohammad Riahi
Keyword(s):  
Immune System ◽  
Production Systems ◽  
Principal Component ◽  
Immune Network ◽  
Centrifugal Pumps ◽  
Artificial Immune ◽  
Human Immune System ◽  
Time Frequency ◽  
Artificial Immune Network ◽  
Damage Condition

Reducing the cost of unscheduled shutdowns and enhancing the reliability of production systems is an important goal for various industries; this could be achieved by condition monitoring and artificial intelligence. Cavitation is a common undesired phenomenon in centrifugal pumps, which causes damage and its detection in the preliminary stage is very important. In this paper, cavitation is identified by use of vibration and current signal and artificial immune network that is modeled on the base of the human immune system. For this purpose, first data collection were done by a laboratory setup in health and five stages damage condition; then various features in time, frequency, and time–frequency were extracted from vibration and current signals in addition to pressure and flow rate; next feature selection and dimensions reduction were done by artificial immune method to use for classification; finally, they were used by artificial immune network and some other methods to identify the system condition and classification. The results of this study showed that this method is more accurate in the detection of cavitation in the initial stage compared to methods such as non-linear supportive vector machine, multi-layer artificial neural network, K-means and fuzzy C-means with the same data. Also, selected features with artificial immune system were better than principal component analysis results.

Concept to Support the Flexibility of Manufacturing System through Reconfigurable Structure Based on Modular Design

2015 ◽  
Vol 816 ◽  
pp. 536-546
Author(s):  
Vladimír Rudy ◽  
Andrea Lešková
Keyword(s):  
Flexible Manufacturing ◽  
Manufacturing Systems ◽  
Structural Changes ◽  
Modular Design ◽  
Production Systems ◽  
Low Cost ◽  
Modular Construction ◽  
Production Platform ◽  
Flexible Adaptation ◽  
Reconfigurable Structure

This article deals about the challenges of structural changes in manufacturing conditions. The objective of this paper is to present the modular workstations concept based on miniaturization and re-configurability trends. The article is aimed at problems of designing of production systems with a modular construction structure. The modular structure allows an individual and flexible adaptation to varying requirements but also the realization of low-cost solutions for creation of new or modernized production base. The goal is to present the example of modular workstations solutions that correspond with new designing approach. The specification of basics principles, which should help to designing flexible manufacturing systems, discussed in this paper are: modularity; integrability; convertibility; diagnosability; customization. The theoretical part provides an overview of fundamental design principles in manufacturing structures. In the first part of this article are discussed the specification of basic flexibility types in production system and the main impacts influencing design of manufacturing structures. The closing section of the article provides the specification of example solution of adjustable production platform with modular frame (called desktop factory).

scholarly journals Evolution of Wireless Sensor Network for Air Quality Measurements

Electronics ◽  
2018 ◽  
Vol 7 (12) ◽  
pp. 342 ◽  
Author(s):  
Patricia Arroyo ◽  
Jesús Lozano ◽  
José Suárez
Keyword(s):  
Air Quality ◽  
Sensor Network ◽  
Low Cost ◽  
Principal Component ◽  
Solar Panels ◽  
Success Rates ◽  
Sampling System ◽  
Air Quality Measurements ◽  
Zigbee Protocol ◽  
Benzene Toluene

This study addresses the development of a wireless gas sensor network with low cost, small size, and low consumption nodes for environmental applications and air quality detection. Throughout the article, the evolution of the design and development of the system is presented, describing four designed prototypes. The final proposed prototype node has the capacity to connect up to four metal oxide (MOX) gas sensors, and has high autonomy thanks to the use of solar panels, as well as having an indirect sampling system and a small size. ZigBee protocol is used to transmit data wirelessly to a self-developed data cloud. The discrimination capacity of the device was checked with the volatile organic compounds benzene, toluene, ethylbenzene, and xylene (BTEX). An improvement of the system was achieved to obtain optimal success rates in the classification stage with the final prototype. Data processing was carried out using techniques of pattern recognition and artificial intelligence, such as radial basis networks and principal component analysis (PCA).

scholarly journals A Deep Learning Approach for Table Tennis Forehand Stroke Evaluation System Using an IMU Sensor

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Sahar S. Tabrizi ◽  
Saeid Pashazadeh ◽  
Vajiheh Javani
Keyword(s):  
Evaluation System ◽  
Low Cost ◽  
Estimation Error ◽  
Weighted Average ◽  
Principal Component ◽  
Training System ◽  
Table Tennis ◽  
Sports Activity ◽  
Nonlinear Regression Models ◽  
Shadow Play

Psychological and behavioral evidence suggests that home sports activity reduces negative moods and anxiety during lockdown days of COVID-19. Low-cost, nonintrusive, and privacy-preserving smart virtual-coach Table Tennis training assistance could help to stay active and healthy at home. In this paper, a study was performed to develop a Forehand stroke’ performance evaluation system as the second principal component of the virtual-coach Table Tennis shadow-play training system. This study was conducted to show the effectiveness of the proposed LSTM model, compared with 2DCNN and RBF-SVR time-series analysis and machine learning methods, in evaluating the Table Tennis Forehand shadow-play sensory data provided by the authors. The data was generated, comprising 16 players’ Forehand strokes racket’s movement and orientation measurements; besides, the strokes’ evaluation scores were assigned by the three coaches. The authors investigated the ML models’ behaviors changed by the hyperparameters values. The experimental results of the weighted average of RMSE revealed that the modified LSTM models achieved 33.79% and 4.24% estimation error lower than 2DCNN and RBF-SVR, respectively. However, the R ¯ 2 results show that all nonlinear regression models are fit enough on the observed data. The modified LSTM is the most powerful regression method among all the three Forehand types in the current study.

scholarly journals Unraveling Admixture, Inbreeding, and Recent Selection Signatures in West African Indigenous Cattle Populations in Benin

2021 ◽  
Vol 12 ◽  
Author(s):  
Sèyi Fridaïus Ulrich Vanvanhossou ◽  
Tong Yin ◽  
Carsten Scheper ◽  
Ruedi Fries ◽  
Luc Hippolyte Dossa ◽  
...  
Keyword(s):  
Production Systems ◽  
Principal Component ◽  
West African ◽  
Economic Traits ◽  
Selection Signatures ◽  
Extended Haplotype ◽  
Indigenous Cattle ◽  
Environmental Pressures ◽  
Inbreeding Coefficients ◽  
Recent Selection

The Dwarf Lagune and the Savannah Somba cattle in Benin are typical representatives of the endangered West African indigenous Shorthorn taurine. The Lagune was previously exported to African and European countries and bred as Dahomey cattle, whereas the Somba contributed to the formation of two indigenous hybrids known as Borgou and Pabli cattle. These breeds are affected by demographic, economic, and environmental pressures in local production systems. Considering current and historical genomic data, we applied a formal test of admixture, estimated admixture proportions, and computed genomic inbreeding coefficients to characterize the five breeds. Subsequently, we unraveled the most recent selection signatures using the cross-population extended haplotype homozygosity approach, based on the current and historical genotypes. Results from principal component analyses and high proportion of Lagune ancestry confirm the Lagune origin of the European Dahomey cattle. Moreover, the Dahomey cattle displayed neither indicine nor European taurine (EUT) background, but they shared on average 40% of autozygosity from common ancestors, dated approximately eight generations ago. The Lagune cattle presented inbreeding coefficients larger than 0.13; however, the Somba and the hybrids (Borgou and Pabli) were less inbred (≤0.08). We detected evidence of admixture in the Somba and Lagune cattle, but they exhibited a similar African taurine (AFT) ancestral proportion (≥96%) to historical populations, respectively. A moderate and stable AFT ancestral proportion (62%) was also inferred for less admixed hybrid cattle including the Pabli. In contrast, the current Borgou samples displayed a lower AFT ancestral proportion (47%) than historical samples (63%). Irrespective of the admixture proportions, the hybrid populations displayed more selection signatures related to economic traits (reproduction, growth, and milk) than the taurine. In contrast, the taurine, especially the Somba, presented several regions known to be associated with adaptive traits (immunity and feed efficiency). The identified subregion of bovine leukocyte antigen (BoLA) class IIb (including DSB and BOLA-DYA) in Somba cattle is interestingly uncommon in other African breeds, suggesting further investigations to understand its association with specific adaptation to endemic diseases in Benin. Overall, our study provides deeper insights into recent evolutionary processes in the Beninese indigenous cattle and their aptitude for conservation and genetic improvement.

scholarly journals Regional Seismic Characterization of Shallow Subsoil of Northern Apulia (Southern Italy)

Geosciences ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 416
Author(s):  
Enrico Paolucci ◽  
Giuseppe Cavuoto ◽  
Giuseppe Cosentino ◽  
Monia Coltella ◽  
Maurizio Simionato ◽  
...  
Keyword(s):  
Southern Italy ◽  
Carbonate Platform ◽  
Low Cost ◽  
Principal Component ◽  
Ambient Vibration ◽  
Resonance Effects ◽  
Resonance Phenomena ◽  
Single Station ◽  
Seismic Characterization

A first-order seismic characterization of Northern Apulia (Southern Italy) has been provided by considering geological information and outcomes of a low-cost geophysical survey. In particular, 403 single-station ambient vibration measurements (HVSR techniques) distributed within the main settlements of the area have been considered to extract representative patterns deduced by Principal Component Analysis. The joint interpretation of these pieces of information allows the identification of three main domains (Gargano Promontory, Bradanic Through and Southern Apennines Fold and Thrust Belt), each characterized by specific seismic resonance phenomena. In particular, the Bradanic Through is homogeneously characterized by low frequency (<1 Hz) resonance effects associated with relatively deep (>100 m) seismic impedance, which is contrasting corresponding to the buried Apulian carbonate platform and/or sandy horizons located within the Plio-Pleistocene deposits. In the remaining ones, relatively high frequency (>1 Hz) resonance phenomena are ubiquitous due to the presence of shallower impedance contrasts (<100 m), which do not always correspond to the top of the geological bedrock. These general indications may be useful for a preliminary regional characterization of seismic response in the study area, which can be helpful for an effective planning of more detailed studies targeted to engineering purposes.

scholarly journals The New Brazilian Power Quality Standard and a Low Cost Device Meter

2012 ◽  
Vol 04 (03) ◽  
pp. 144-152
Author(s):  
Guilherme P. Colnago ◽  
Jose L. F. Vieira ◽  
Gilberto C. D. Sousa ◽  
Jose R. Macedo Jr.
Keyword(s):  
Power Quality ◽  
Low Cost ◽  
Quality Standard
Sign in / Sign up

Export Citation Format

Share Document