scholarly journals GROWTH AND FLOWERING OF ‘PUYAT’ DURIAN (Durio zibethinus Murr.) AS INFLUENCED BY DIFFERENT TYPES OF FERTILIZER APPLICATION

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Alminda Magbalot-Fernandez ◽  
Kharelle Samantha Ablen ◽  
Saikat Basu
Keyword(s):  
Statistical Analysis ◽  
Soil Analysis ◽  
Block Design ◽  
Fertilizer Application ◽  
Foliar Fertilizer ◽  
Durio Zibethinus ◽  
Different Types ◽  
Old Trees ◽  
Optimum Production

This study was conducted to evaluate the effect of different types of fertilizer application on the growth and flowering of 'Puyat' Durian (Durio Zibethenus Murr.); and determine the best fertilizer application for the optimum production of Durian. Ten (10) year old trees at Canoy Durian Farm, Pindasan, Mabini, Compostela Valley Province were tested from November 2015 to March 2016. The experiment was laid out in Randomized Completely Block Design (RCBD) with six treatments, replicated three times. The treatments were: T1- Untreated; T2-Recommended Rate- RR (based on soil analysis); T3- Optimum RateOR + (3kg NPK+1kg MOP); T4- OR+ GOFF; T5- RR+ GOFF; T6- GOFF (Green-shield Organic-based Fortified Foliar Fertilizer).Statistical analysis showed that there were significant differences among treatments in terms of trees with flushes and number of flowers per cluster but no significant effects were observed in canopy diameter and number of flower cluster per tree. Result of the study showed that fertilizer application increased the number of flower per cluster of 'Puyat' Durian and enhanced flushing of durian trees. The study further revealed that organic based foliar fertilizer alone enhanced flowering up to five times higher than without application (control). While numerically, GOFF (Green-shield Organic-based Fortified Foliar Fertilizer) alone had the highest number of flower cluster per tree.

Influence of a BactoFil microbiological preparation on the intensity of infection by Rhizoctonia solani and the effects on sugar beet yield and quality

2012 ◽  
pp. 102-109
Author(s):  
Suzana Kristek ◽  
Andrija Kristek ◽  
Dragana Kocevski ◽  
Antonija K. Jankovi ◽  
Dražen Juriši
Keyword(s):  
Sugar Beet ◽  
Rhizoctonia Solani ◽  
Nitrogen Fertilizer ◽  
Soil Analysis ◽  
Block Design ◽  
Sugar Content ◽  
Pathogenic Fungi ◽  
Fertilizer Application ◽  
Beet Root ◽  
Set Up

The experiment was set up on two types of the soil: Mollic Gleysols (FAO, 1998) and Eutric Cambisols where the presence of pathogenic fungi – sugar beet root decay agent – Rhizoctonia solani has been detected since 2005. In a two year study (2008, 2009), the experiment was set up by completely randomized block design in 4 repetitions and 16 different variants. Two beet varieties, Belinda, sensitive to pathogenic fungi R. solani, and Laetitia, tolerant to pathogenic fungi R. solani), were grown. The microbiological preparation BactoFil was applied in different amounts in autumn and spring. In addition, the nitrogen fertilizer application, based on the results of soil analysis, was varied. The following parameters were tested: amount of infected and decayed plants, root yield, sugar content, sugar in molasses and sugar yield. The best results were obtained by applying the microbiological preparation BactoFil, and by 30% reduced nitrogen fertilizer application. Preparation dosage and time of application depended on soil properties.

scholarly journals Prunning technique and foliar fertilizer application to improve yield of pecco in fourth prunning year of tea plant

2016 ◽  
Vol 19 (1) ◽  
Author(s):  
Muthia Syafika Haq ◽  
Adhi Irianto Mastur ◽  
Dr H Karyudi
Keyword(s):  
Humic Acid ◽  
Block Design ◽  
Fertilizer Application ◽  
Tea Plant ◽  
The Other ◽  
Foliar Fertilizer ◽  
Randomized Block Design ◽  
Tea Production ◽  
Field Area ◽  
Better Than

Effect of prunning technique and foliar fertilizer application had been conducted to improve yield of pecco in the Research Institute for Tea and Cinchona experiment station, Gambung, Indonesia with altitude of 1.350 m above sea level, and with andysol soil type. The experiment was held from July to October 2015 in tea production field area containing 480 plants. The clone was GMB 7and was in the fourth prunning year, interval of plucking pecco was seven days. The experiment was arranged in a randomized block design with four treatments, replicated six times. Foliar fertilizer application was performed following every plucking. The results indicated that breaking apical dominance of tea short by 5 cm–10 cm of prunning above plucking table combined with foliar fertilizer application of N 1% and ZnSo<sub>4</sub> 2% + 0,1% of humic acid, could increase weight of pecco per plot in the first nine weeks of the prunning. This treatment was better than the other three. But the percentage of pecco shoots was low, lower than 50%, the weight of one pecco was also very low 0,7 g, indicating that the treatment of harvesting pecco in the fourth prunning year was not recomended to be practiced in improving yield of pecco.

scholarly journals The effect of the type of preparation on the deposit of copper while spraying the winter oilseed rape

2018 ◽  
Vol 27 (1) ◽  
Author(s):  
Katarzyna Dereń ◽  
Antoni Szewczyk ◽  
Tomasz Robert Sekutowski ◽  
Monika Kowalska-Góralska
Keyword(s):  
Statistical Analysis ◽  
Oilseed Rape ◽  
Element Concentration ◽  
Copper Deposit ◽  
Development Phase ◽  
Winter Oilseed Rape ◽  
Working Fluids ◽  
Foliar Fertilizer ◽  
Different Types ◽  
Flat Fan Nozzle

The aim of the research was to determine the copper deposit volume on winter oilseed rape in three development phase (according to the BBCH scale: 12, 14 and 16). The experiment was performed in triplicate at the spraying speed of 0.86 m s-1. Two working fluids were used: foliar fertilizer Mikrovit Copper 80 and a nanocopper preparation, at the dose of 160 g Cu ha-1. The deposition treatment of the plants was conducted in the spraying chamber ‘Aporo1’ at two pressures (0.20 and 0.28 MPa), using two different types of flat fan nozzles. The dried rape plants were mineralized, and then, in order to determine the deposit, the Cu element concentration was measured using the spectrometer. The largest deposit of copper was obtained using the foliar fertilizer Mikrovit Copper 80 and using a double flat fan nozzle DF 120-02. The statistical analysis of the results of the study showed a significant effect of the type of liquid used on the value of copper deposit on winter oilseed rape plants.

scholarly journals Pengaruh Waktu dan Frekuensi Aplikasi Pupuk Daun Terhadap Pertumbuhan dan Pembungaan Anggrek Dendrobium ’Tong Chai Gold’

2011 ◽  
Vol 1 (2) ◽  
pp. 96
Author(s):  
Dewi Sukma ◽  
Ary Setiawati
Keyword(s):  
Key Words ◽  
High Frequency ◽  
Block Design ◽  
Fertilizer Application ◽  
Leaf Length ◽  
Young Leaf ◽  
Application Time ◽  
Foliar Fertilizer ◽  
Time Of Application

<p>ABSTRACT</p><p><br />Most of orchids grow slowly. Low fertilizer concentration with high frequency of fertilization can be the alternative to increase orchids growth. The objective of the research was to evaluate the effect of time and frequency of fertilizer application on Dendrobium ‘Tong Chai Gold’. The experiment was arranged in <br />randomized of completely block design with two factor of treatment. The first factor is time of application and the second one is frequency of application of foliar fertilizer. The time applications in the morning about 6.30 to 7.30 <br />o’clock, at mid day about 11.30 to 12.30 o’clock, and in the afternoon about 16.30 to 17.30 o’clock. The frequency of foliar fertilizer application were every three days or six days. The result of this experiment showed that time and frequency application of foliar fertilizer could not increased number of bulb, but increased young leaf length, and width. Fertilizer was applied in the morning combined with every three days frequency of fertilizer tended to result a better flowering of Dendrobium ‘Tong Chai Gold’.</p><p><br />Key words : Dendrobium, fertilizer, application time and frequency, growth, flowering,</p>

scholarly journals The Effect of Concentration and Timing of Application of Green Tonik Foliar Fertilizer on theGrowth and Yield of Cucumber (Cucumis sativusL.) Mercy Variety

AGRIFOR ◽  
2018 ◽  
Vol 17 (2) ◽  
pp. 323
Author(s):  
Rahman Hakim
Keyword(s):  
Block Design ◽  
Fertilizer Application ◽  
Fruit Weight ◽  
Growth And Yield ◽  
Application Time ◽  
Application Timing ◽  
Foliar Fertilizer ◽  
Randomized Block Design ◽  
The Village ◽  
Fruit Diameter

This experiment aims to: (1) to study of the effect of concentration and application timing of Green Tonik foliar fertilizeras well as their interaction on the growth and yield of cucumber plants; and (2) to find proper concentration and application timing of Green Tonik foliar fertilizer for better growth and yield of cucumber plants.The experiment carried out from March 2016 to May 2016, in the Village of Muara Bengkal Ilir, Muara Bengkal Subdistrict, East Kutai District.  It applied Completely Randomized Block Design with factorial experiment 4 x 3 and three replications.  The first factor was the concentration of the Green Tonik  foliarfertilizer (K) consists of 4 levels, namely: no Green Tonik foliar fertilizer application (k0), 1 ml l-1 water(k1), 2 ml l-1 water(k2), and 3 ml l-1 water(k3). The second factor wasinterval of the application time of Green Tonik foliar fertilizer(W) consists of 3 levels: 5, 10, 15, 20, and 25 days after planting (w1), 7, 14, 21, 28, and 35 days after planting (w2), and 10, 20, 30, 40, and 50 days after planting (w3).Result of the experiment revealed that : (1) concentration of Green Tonik foliar fertilizer application was affected significantly to very significantly on plant lenght at 30 and 45 days after planting, days of plant flowered, number of fruits per plant, diameter of fruit, weight of one fruit, and production of fruits, but no significant on the plant lenght at 15 days after planting, and lenght of fruit.  The highest production of fruit is attained by the 2 ml l-1 water (k3), namely 54,67 Mg ha-1, In reverse, the least production is attained by without Green Tonik foliar fertilizer (k0), namely 24,00 Mg ha ̵ ¹; (2) interval of Green Tonik foliar fertilizer application time was no significant on the plant lenght at 15 and 45 days after planting, days of plant flowered, number of fruits per plant, lenght of fruit, diameter of fruit, weight of one fruit, and production of fruit, but affected significant on the plant lenght at 30 days after planting; and (3) interaction between concentration and application timing of Green Tonik foliar fertilizer was no significant on the all parameters observed.

scholarly journals EFFECT OF ORGANO- BASED FOLIAR FERTILIZER ON CHLOROPHYLL AND NUTRITIONAL QUALITY OF OKRA VARIETIES IN DERIVED SAVANAH OF NIGERIA

2020 ◽  
Vol 19 (1) ◽  
pp. 113-131
Author(s):  
P. O. AKINTOKUN ◽  
D. U. AMUOFU ◽  
M. R. OSHO
Keyword(s):  
Nutritional Quality ◽  
Field Experiments ◽  
Block Design ◽  
Fertilizer Application ◽  
Vegetable Crop ◽  
Crude Fibre ◽  
Foliar Fertilizer ◽  
Randomized Complete Block Design ◽  
The Tropics

Cultivation of okra (Abelmoschus esculentus L.) which is a commonly grown vegetable crop in the tropics is constrained by depleting soil fertility. Use of foliar fertilizer as a supplement has been successfully reported in the temperate region hence there is need to determine the effect of foliar liquid fertilizer on okra growth and nutritional quality. Field experiments were conducted at the Abeokuta (Federal University of Agriculture [FUNAAB] ) and Ibadan (National Horticulture Research Institute [NIHORT] ), between May and August 2015 to evaluate the response of two okra varieties to types and rates of organic-based foliar fertilizer application. Experiment was a 2 × 2 × 5 factorial combinations laid out in Randomized Complete Block Design with three replicates at both locations. Factors were okra variety (LD88 and NHae47-4), the fertilizer types (D.I. Grow Green ® and D.I.Grow Red®) and four rate of foliar applications (0 [control], 300, 600 and 900 ml/ha) while NPK 15:15:15 served as check. The results showed that the D.I.Grow Red® at 300ml/ha produced the higher Ash (8.23%), fat (2.54%,), moisture (14.65%),  and carbohydrate (47.31%)  at Abeokuta while 600 ml/ha produced significantly the higher ash, crude fibre, moisture and carbohydrate (9.37%, 15.94%, 9.13%, and 52.02%), respectively in Ibadan. The study concluded that okra variety LD88 had superior growth performance. Application of D.I.Grow Red® at the rate of 300 ml/ha at Abeokuta and 600 ml/ha at Ibadan enhance fruit nutritional quality of okra. Therefore, 300 and 600 ml/ha is recommended to farmers in Abeokuta and Ibadan, respectively.    

scholarly journals Economic production of maize under chemical and granular organic fertilizer with hormone mixed formula, NPK and organic fertilizer

2019 ◽  
Author(s):  
A. K. Keteku ◽  
P. Intanon ◽  
S. Terapongtanakorn ◽  
R. Intanon
Keyword(s):  
Soil Analysis ◽  
Block Design ◽  
Organic Fertilizer ◽  
Fertilizer Application ◽  
Application Rate ◽  
Growth Data ◽  
Maize Production ◽  
Economic Production ◽  
Fertilizer Application Rate ◽  
And Control

A new hybrid of maize (Pacific 999 Super) was investigated under six treatments; organic fertilizer (OF), chemical and granular organic fertilizer with hormone mixed formula A (HO-A), formula B (HO-B), formula C (HO-C), NPK-15-15-15 and control in 2017 and 2018 seasons at Phitsanulok, Thailand. The treatments were arranged in randomized complete block design (RCBD) with 3 replications. Fertilizer application rate was 300 kg/ha. Initial soil analysis had shown lower rates of NPK (0.394%, 0.013% and 0.191%). The vegetative growth data showed that, mean plant height, leaf area, leaf chlorophyll and total dry matter/plant were highest in HO-C (255.49 cm, 158.37 dm2, 61.10 and 299.62g, respectively). A maximum grain weight (9,289.67 kg/ha), crude protein (8.99%) and profit (889.6 $/ha) were again recorded in HO-C. The results have demonstrated that the HO-C produced the greatest yield, income and is recommend for maize production.

scholarly journals APLIKASI PUPUK DAUN UNTUK MENINGKATKAN PERTUMBUHAN DAN HASIL BAWANG DAYAK (Eleutherine palmifolia (L.) Merr)

2021 ◽  
Vol 23 (1) ◽  
pp. 66-71
Author(s):  
Elva Suryani ◽  
Ronny Yuniar Galingging ◽  
Widodo Widodo ◽  
Marlin Marlin
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Fertilizer Application ◽  
Growth And Yield ◽  
Yield Response ◽  
Time Interval ◽  
Time Intervals ◽  
Foliar Fertilizer ◽  
Randomized Block Design ◽  
Leaf Fertilizer

[APPLICATION OF LEAF FERTILIZER TO INCREASE THE GROWTH AND YIELD OF BAWANG DAYAK (Eleutherine palmifolia (L.) Merr)]. Bawang Dayak (Eleutherine palmifolia (L.) Merr) is a potential medicinal plant and required improved growth and yield through the application of appropriate fertilizers. This study aimed to increase the growth and yield of bawang Dayak by determining the optimum concentration and time interval of foliar fertilizer application. The experiment was arranged in a completely randomized block design factorial. The first factor was the concentration of foliar fertilizer, consisting of 0,1, 2, and 3 g/L. The second factor was interval application of foliar fertilizer, consisting of every day, every 3 days, every 6 days, and every 9 days. The results showed that bawang Dayak did not show a significant response to foliar fertilizers. However, there was an interaction between the concentration and interval of foliar fertilizer application which had a significantly different effect on plant height. The highest plant height occurred at intervals of 3-day foliar fertilizer application with a concentration of 3 g/L. The concentration of foliar fertilizer had a significant effect on the variables of plant height, bulb fresh weight, as well as the bulb numbers. All concentrations of foliar fertilizer (0-3 g/L), and time intervals of foliar fertilizer application (1-9 days) affected the same growth and yield response of Bawang Dayak. 

scholarly journals Efektivitas Pupuk Daun terhadap Pertumbuhan dan Hasil Kedelai pada Sistem Tanpa Olah Tanah

2019 ◽  
Vol 21 (2) ◽  
pp. 29
Author(s):  
Dewi Auliya Ulva ◽  
Supriyono Supriyono ◽  
Pardono Pardono
Keyword(s):  
Block Design ◽  
Fertilizer Application ◽  
Growth And Yield ◽  
Soil Tillage ◽  
Soil System ◽  
Area Index ◽  
Foliar Fertilizer ◽  
Central Java ◽  
Tillage System ◽  
Leaf Fertilizer

<p>Maintaining soil quality can be done by cultivating soybean using the conservation soil tillage principle, which can be applied in no tillage soil system. The purpose of this study was to obtain the influence of the type of leaf fertilizer and the frequency of leaf fertilizer application on the growth and yield of soybeans in the without tillage system. This research was conducted in Kedawung, Sragen Central Java on May-August 2018. The research used randomized complete block design (RCBD) with 7 levels and 4 replications. Foliar fertilizer was given every 10 and 15 days. The observed variables were periodic observations, maximum vegetative, and yield. Maximum vegetative and periodic observations showed that P3 (gandasil D fertilizer every 15 days) has significant effect and resulted the highest yield. The results of the study showed that gandasil D fertilizer every 15 days treatment increased leaf area index. Gandasil b every 15 days treatment increased the yield of 100 seeds, but reduce the quantity of seed weight/plot, and foliar fertilizer is not effectively used in this cultivation.</p>

Nutrients demand of cactus forage

2019 ◽  
Author(s):  
João Macedo Moreira ◽  
Aldrin Martin Pérez-Marin ◽  
Jucilene Silva Araújo ◽  
George Rodrigues Lambais ◽  
Aldo Sales
Keyword(s):  
Block Design ◽  
Nutrient Utilization ◽  
Nutrient Recovery ◽  
Fertilizer Treatment ◽  
Treatment Control ◽  
Mineral Fertilization ◽  
Randomized Block Design ◽  
Nutrient Use ◽  
Different Types ◽  
Semi Arid Region

The study aimed to evaluate the efficiency of nutrient use in three cactus forage (CF) cultivars (Opuntia stricta and Nopalea cochenillifera), 365 days after planting under different types of fertilizer in two research sites (Condado and Riachão) of the semi-arid region of Paraiba state, Brazil. The experimental design was a randomized block design with treatments in a factorial scheme (3×4), three cultivars of CF (Orelha de elefante Mexicana; Miúda; Bahiana), and four fertilizer treatment (Control; Manure; Manure with Nitrogen; Mineral fertilization) with four replications. The CF cultivars did not differ significantly in nutrient use. That means of physiological efficiency by CF cultivars were 1.62, and 2.36 kg of biomass per kg of nutrient applied in Condado and Riachão, respectively. The efficiency of nutrient recovery was 16% for the Condado, according the following order: K&gt; P&gt; Ca&gt; N&gt; C = Mg and 12% for Riachão: K&gt; P&gt; N&gt; C = Ca = Mg. In the two research sites, the treatment with mineral fertilization significantly increased the efficiency use of N, P and K in comparison to the other treatments. The average for efficiency of nutrient utilization was 25% and 19% for Condado and Riachão, respectively, in the following order for Condado: K&gt; P&gt; N&gt; Ca = Mg&gt; C, and Riachão: K&gt; P&gt; N&gt; C&gt; Mg = Ca. In a CF production system aiming to obtain a yearly harvest cycle, it is necessary to replenish of K and P to maintain the nutritional balance between the soil and CF plant.

Sign in / Sign up

Export Citation Format

Share Document