scholarly journals Analisis Standar Belanja Kegiatan Penyediaan Alat Tulis Kantor Pada Pemerintah Kota Sungai Penuh

2015 ◽  
Vol 3 (2) ◽  
pp. 62-79
Author(s):  
Rina Widyanti

Analysis of Expense Standards (ASB) is a guideline used to analyze the reasonableness of workload or cost of each activity undertaken by the Unit (SKPD) in one fiscal year. The purpose of this research is to develop ASB especially for activity provision of stationery (ATK). The data used in this research is secondary data obtained from the DPA-SKPD Sungai Penuh City government. The primary data of interviews with leaders and some of the staff as well as the relevant officials. Data analysis method used is a simple regression. Simple regression analysis is a method of forecasting which will predict the cost standards for ATK activities. This activity is affected by the triggering factors (cost drivers) is the amount of activity. The results of this study in the form of equations where the standard shopping ASB ATK influenced by the activity of providing fixed expenditure and expenditure variables. Shopping variable for this activity is influenced by the amount of activity. To create a model for the analysis of expenditure standard ATK activity is grouped into nine (9) functions of government services consisting of the economic service./unction, the function of health care, educational services, protective services, public services, tourism services and security, public services and housing facilities, service districts, and village services. Verify the reasonableness of calculations based on the formulation of the model ASB shopping on 9 functions of government services shows that the value of expenditure contained in each DPA SKPD can be approved based on the criteria of fairness shopping. However, there are obstacles in the processing of data in the form of data on some SKPDs DPA form the basis of ASB which included incomplete and the allocation of its budget is too high thus affecting the results of the formulation ASB. It is hoped that this study provides an overview to the team of local government budgets to increase performance budgeting in the future.

2016 ◽  
Vol 8 (2) ◽  
Author(s):  
Arif Hasan ◽  
Dedi Budiman Hakim ◽  
Irdika Mansur

This study aims to analyze causes of the low uptake of the budget and formulate a strategy of maximizing the absorption of expenditure on Balai Penelitian dan Pengembangan Lingkungan Hidup dan Kehutanan Manokwari. Respondents involved are 20 people that consist of: treasury officials and holder output of activity. The data used were secondary data in the form of reports on budget realization (LRA) quarter I, II, III and IV of the fiscal year 2011 to 2015, and the primary data were in the form of interviews with the help of a questionnaire. While the analysis of the data used was descriptive analysis using data tabulation, and the analysis of the three stages strategy of the decision making used IFE and EFE matrix, SWOT matrix and QSPM matrix.The results showed that there are 19 factors causing low of budget absorption until the end of the third quarter, and there were 10 drafts of policy as a strategy for maximizing the absorption of the budget on Balai Penelitian dan Pengembangan Lingkungan Hidup dan Kehutanan Manokwari.ABSTRAKPenelitian ini bertujuan untuk menganalisis penyebab rendahnya penyerapan anggaran belanja dan merumuskan strategi maksimalisasi penyerapan anggaran belanja pada Balai Penelitian dan Pengembangan Lingkungan Hidup dan Kehutanan Manokwari. Responden yang terlibat adalah 20 orang yaitu pejabat perbendaharaan dan pemegang output kegiatan. Data yang digunakan adalah data sekunder berupa laporan realisasi anggaran (LRA) triwulan I, II, III dan IV tahun anggaran 2011 sampai 2015, dan data primer berupa wawancara dengan bantuan kuesioner. Sedangkan analisis data yang digunakan adalah analisis deskriptif menggunakan analisis tabulasi, dan analisis analisis strategi tiga tahap pengambilan keputusan menggunakan matriks IFE dan EFE, matriks SWOT dan matriks QSPM. Hasil penelitian menunjukkan bahwa terdapat 19 faktor penyebab rendahnya penyerapan anggaran belanja sampai akhir triwulan III, dan terdapat 10 rancangan kebijakan sebagai strategi maksimalisasi penyerapan anggaran belanja di Balai Penelitian dan Pengembangan Lingkungan Hidup dan Kehutanan Manokwari.


2020 ◽  
Vol 2 (2) ◽  
pp. 68-74
Author(s):  
Isro' Lailia

Fast and effective public services are a supporter of public administration so that continuous innovation is needed to improve the quality of public services. The city of Surabaya as one of the cities with the title of smart city has tried to always make innovations in an effort to improve the quality of public services, one of which is through the Surabaya Single Window. Surabaya Single Window is an online-based licensing service created to create effective public services. This article attempts to describe how the licensing service innovation carried out by the City Government of Suraya through the Surabaya Single Window covers five important aspects. The method used is descriptive qualitative using secondary data. It was found that the City of Surabaya succeeded in creating public service innovations through the Surabaya Single Window. The Surabaya Single Window has a positive impact on licensing services in the City of Surabaya, although in its implementation there are still certain guarantees. 


2018 ◽  
Vol 13 (1) ◽  
pp. 13-28
Author(s):  
Anggi Saputra ◽  
Intiyas Utami ◽  
Ika Kristianti

The high level of corruption in the Indonesian government sector makes good governance difficult to achieve. Accountability and transparency is a must in the effort to realize good governance. The efforts to reduce the level of corruption in Indonesia is the awareness of civil servants to disclose the fraud in the workplace agencies. This research uses qualitative methods with the aim to describe the implementation of accountability and transparency of local government financial reporting as well as identify potential whistleblowing for misuse of funds. This research uses primary data in the form of in-depth interviews with informants and secondary data in the form of financial statements of Salatiga local government that has been audited by BPK. The resource persons in this research are civil servants domiciled in Salatiga City and work in SKPD Salatiga City in the finance department of each SKPD. The results of this research indicate that Salatiga City Government has been accountable and transparent in local government financial reporting as well as there is no potential whistleblowing for misuse of funds. The results of this research can be used as an evaluation material for government agencies to establish a good whistleblowing mechanism so that civil servants working in government agencies are more willing to disclose the fraud. Keywords: Accountability, Civil Servant, Good governance, Transparency, Whistleblowing.


Author(s):  
Dedi Djuliansah ◽  
Trisna Insan Noor ◽  
Yosini Deliana ◽  
Meddy Rachmadi

This study aims to identify the cost, revenue, and income of soybean farming, identify the feasibility of soybean farming, identify the breakeven point and change the break-even point due to changes in selling prices in Jatiwaras District, Tasikmalaya Regency. The method used in this study is a survey method, while the data used consists of primary data and secondary data. Determination of sample farmers using the Two Stage Cluster Random Sampling method, with a sample size of 65 people with a proportion of 27 farmers in paddy fields and 38 farmers in land, from a population of soybean farmers as many as 185 people.            The results of this study indicate that the cost of soybean farming per hectare in paddy fields is Rp. 5,896,896.90 with receipts of Rp 8,478,139.53 and income of Rp. 2,581,242.63, while the cost of soybean farming per hectare on land is Rp. 4,163,487.48 with receipts of 8,342,774.57 and income of Rp. 4,179,287.09. Soybean farming in land is more feasible to be cultivated with an R / C value of 2.01 while the R / C value in paddy fields is 1.45. Minimum acceptance received by farmers from soybean farming so as not to lose in one planting season of Rp. 63,911.14 in paddy fields and Rp. 668,378.02 in land, the minimum production volume received by farmers from soybean farming so as not to lose in one planting season is 10.65 Kg in paddy fields and 111.40 Kg in land and minimum land area that must be processed by farmers so that no loss in one planting season of 0.01 ha in paddy fields and 0.08 ha on land. Decrease in output price of Rp. 1,000.00 (16.67%) causes the minimum acceptance received by farmers from soybean farming so as not to lose in one planting season of Rp. 100,196.38 in paddy fields and Rp. 767,384.61 on land. The margin value of safety on soybean farming is 90.53 in wetland and 82.40 in land area


2021 ◽  
Vol 4 (1) ◽  
pp. 135
Author(s):  
Murni Ratna sari Alauddin ◽  
Nursamsir Nursamsir ◽  
Indar Ismail Jamaluddin

After the earthquake, tsunami, and liquefaction on 28 September 2018, the condition of the five-story building was damaged, but it is still inhabited by dozens of families. This paper seeks to explore the attitude of the Palu City Government-Regional People's Representative Council (DPRD), residents, and parties outside the government and outside the residents regarding the use of these flats after the earthquake. The research was conducted qualitatively. Primary data were collected from direct observation and interviews and sources of mass media coverage also complement the secondary data needs. Borrowing Robert K Merton's structural functionalism theory, this research finds a condition if after a disaster, residents strengthen their institutions by building consensus or mutual agreement. Meanwhile, the City Government of Palu, although stated that they prohibited them from returning to the apartment, they have not been able to provide a more feasible housing solution after the earthquake. Ironically, members of the DPRD, as partners of the mayor in the government in Palu City, do not yet know about this condition.


Author(s):  
Fitsum Etefa Ahmed ◽  
Rotick K. Gideon

Cutting is the process in which goods or garment material are cut and converted into pattern shapes of the goods or garment components. There are two methods of Leather cutting, which are hand cutting and machine cutting. Hand cutting is done with the use of hand knife, cutting board and cutting patterns. Machine cutting can be done using semi-automatic cutting machines or fully-automatic cutting machines. Currently, in Ethiopia, different local and foreign investors are participating in leather products manufacturing. Most of the leather product manufacturing industry and some Small and Medium enterprise’s (SME’s) in the country are using leather cutting machines in order to cut leather goods or garment parts. Most of the industry and SMEs are using imported cutting board made of plastics and rubbers. However, these cutting boards are expensive.   This research aimed at developing a cutting board made from HDPE (High-Density Polyethylene) plastic waste as main material, calcium carbonate as a filler and glass fiber as a reinforcing material. Primary and secondary data gathering techniques were applied simultaneously. Primary data were collected through interview and field observation. Secondary data was gathered by reviewing different literature. The cutting board developed through collecting HDPE plastic waste, washing, shredding and melting the shredded plastic with filler and reinforcing material. The melted plastic poured in to cutting board mold and cooled. The developed cutting board was compared with HDPE cutting board available in the local market. The developed board showed relative compression and hardness properties with the HDPE cutting board available in the market. In the cost analysis, the developed cutting board is cheaper than the cutting board which available in the market. However, the cutting board in the market has better surface texture and quality than the developed cutting board. Melting HDPE plastic waste using metal or clay cooking pots and charcoal fire is a tedious task and smoke from the fire will cause human health problem and will affect environment. Consequently, manual plastic melting method is not feasible for mass production, because it is difficult to control the amount of heat (charcoal fire) during melting process. Based on this the authors recommend using machine based plastic melting and molding during HDPE and related plastic recycling.


1970 ◽  
Vol 4 (1) ◽  
Author(s):  
Lina Sarasdevi Santosa ◽  
P. Alit Suthanaya ◽  
I B. Rai Adnyana

Abstract : Based on data from the Central Statistics Agency (BPS) of Bali in 2013, the population density in the Metropolitan area SARBAGITA (Denpasar-Badung-Gianyar-Tabanan) was 1.057 inhabitants/km2 with an area of 1.753,63 km2 and population was 1.853.017 inhabitants. Availability of facilities and adequate transportation infrastructure is needed, but in fact the performance of roads in the city center has declined. It is characterized by an increase in travel delay problem. Traffic delay problems in the City of Denpasar commonly occur on the stretch of Gatot Subroto street. To minimize the existing problems, Denpasar City Government plans to develop an underpass at the intersection of Gatot Subroto street and Ahmad Yani street. The aim of this study was to analyze the direct benefits of underpass for road users, to analyze the costs necessary to realize and operate the underpass, and to analyze the economic feasibility of the underpass development investment. Based on primary data and secondary data were obtained from government agencies, the method of analysis in this study used the technique of Net Present Value (NPV), Benefit Cost Ratio (BCR) and Internal Rate of Return (IRR). Economic analysis conducted in this study used three criteria (NPV, BCR and IRR) with three interest rates (12%, 15% and 18% per year) stating that the construction of an underpass was economically feasible. For example in the second scenario where the interest rate 15% gain on the analysis of value NPV, BCR and IRR respectively is Rp. 233.462.340.102,00; 1,948 and 30,81%. Suggestions can be submitted from this research is the need to contemplate the effect of changes in land use in areas close to the area around the underpass and needed further study that takes into account the needs of additional traffic lanes.


2019 ◽  
Vol 13 (3) ◽  
pp. 317
Author(s):  
Ella Latifarruhma ◽  
Tutik Dalmiyatun ◽  
Dyah Mardiningsih

Indonesia is an agricultural country where the majority of population has a livelihood as a farmers. Rice is one of the many agricultural commodities needed by the community to fulfill their daily needs. Rice farmers has problems running their farms so they join a group to solve the problem. Farmers group have a role as a learning class, a vehicle for cooperation, production units and business units, sampling is done using census method, the data taken is primary data and secondary data which is then analyzed using simple regression. The result of the study show that farmer group as a learning class has a high category, as vehicle of cooperation has a moderate category, as a production units has a moderate category and as a business units has a high category. Akasia farmer groups have taken on all the roles as a farmer groups. Advice given is the existence of a rice storage warehouse facility for members of the akasia farmer groups.


2018 ◽  
Vol 14 (2) ◽  
pp. 131
Author(s):  
Simon Samuel A. Wales ◽  
Agnes E. Loho ◽  
Jean F. J. Timban

This study aims to determine the circular mobility that occurs in the Sea Satu Village, Pineleng Sub-district of Minahasa Regency, based on several aspects. The data needed to answer for the objectives is primary data and secondary data. Data were collected from direct interviews with respondents, as well as other data taken directly at the Village Head Office. The data were analyzed descriptively and described based on aspects related to circular mobility in this Sea Satu Village. The characteristics of circular mobility practitioners in Desa Sea Satu Village are due to aspects of age, gender, number of family members, education level, occupation type (TNI/POLRI), civil servant, private employee, entrepreneur, Honorer, Craftman, Driver and Ojek) , the number of dependents. The incentive factors are the types of transportation, mileage, and the towing factors are the status of home ownership, and the cost of living.*jnkd*.


2021 ◽  
Vol 306 ◽  
pp. 02026
Author(s):  
Khoiru Rizqy Rambe ◽  
Jonri Suhendra Sitompul ◽  
Sugeng Widodo ◽  
Ahmad Misbah ◽  
Annisa Dhienar Alifia

The existing cultivation pattern of chilli pepper in Riau Islands is unable to fulfilled all market demands. Dissemination of double production (Produksi Lipat Ganda or Proliga) technology was an effort to increase chilli pepper production in Riau Islands. This study aims to analyze the efficiency of chilli pepper farming with Proliga technology application. This research was conducted in Mei 2019 until April 2020 at Maju Mandiri Farmer Group, Setokok Village, Bulang District, Batam City. The primary data obtained from interviews, and the secondary data obtained from related agencies. Data analysis was carried out by calculating costs, revenues, income, and farming efficiency. Based on analysis results, it can be concluded that chilli pepper farming with Proliga technology generates an income of IDR 699,000,000, and the cost incurred in one planting season (12 months) reached IDR 213,193,500. Therefore, the income obtained by farmers is IDR 485,806,500 / hectare. This chilli pepper farming is considered efficient and profitable for farmers, as indicated by the R/C ratio value of 3.27.


Sign in / Sign up

Export Citation Format

Share Document