scholarly journals Polymers of Intrinsic Microporosity

2012 ◽  
Vol 2012 ◽  
pp. 1-16 ◽  
Author(s):  
Neil B. McKeown
Keyword(s):  
Structural Diversity ◽  
Gas Absorption ◽  
Structure Property ◽  
Historical Account ◽  
Covalent Bonds ◽  
Comprehensive Review ◽  
Structure Property Relationships ◽  
Combine Solution ◽  
Polymers Of Intrinsic Microporosity ◽  
Intrinsic Microporosity

This paper focuses on polymers that demonstrate microporosity without possessing a network of covalent bonds—the so-called polymers of intrinsic microporosity (PIM). PIMs combine solution processability and microporosity with structural diversity and have proven utility for making membranes and sensors. After a historical account of the development of PIMs, their synthesis is described along with a comprehensive review of the PIMs that have been prepared to date. The important methods of characterising intrinsic microporosity, such as gas absorption, are outlined and structure-property relationships explained. Finally, the applications of PIMs as sensors and membranes for gas and vapour separations, organic nanofiltration, and pervaporation are described.

scholarly journals 1,3-Diketone Calix[4]arene Derivatives—A New Type of Versatile Ligands for Metal Complexes and Nanoparticles

Molecules ◽  
2021 ◽  
Vol 26 (5) ◽  
pp. 1214
Author(s):  
Sergey N. Podyachev ◽  
Rustem R. Zairov ◽  
Asiya R. Mustafina
Keyword(s):  
Structural Diversity ◽  
Building Blocks ◽  
Structural Features ◽  
Structure Property ◽  
One Pot ◽  
Arene Ligands ◽  
Structure Property Relationships ◽  
New Type ◽  
Synthetic Routes ◽  
Magnetic Resonance Imaging Mri

The present review is aimed at highlighting outlooks for cyclophanic 1,3-diketones as a new type of versatile ligands and building blocks of the nanomaterial for sensing and bioimaging. Thus, the main synthetic routes for achieving the structural diversity of cyclophanic 1,3-diketones are discussed. The structural diversity is demonstrated by variation of both cyclophanic backbones (calix[4]arene, calix[4]resorcinarene and thiacalix[4]arene) and embedding of different substituents onto lower or upper macrocyclic rims. The structural features of the cyclophanic 1,3-diketones are correlated with their ability to form lanthanide complexes exhibiting both lanthanide-centered luminescence and magnetic relaxivity parameters convenient for contrast effect in magnetic resonance imaging (MRI). The revealed structure–property relationships and the applicability of facile one-pot transformation of the complexes to hydrophilic nanoparticles demonstrates the advantages of 1,3-diketone calix[4]arene ligands and their complexes in developing of nanomaterials for sensing and bioimaging.

scholarly journals Surface Modification by Polyzwitterions of the Sulfabetaine-Type, and Their Resistance to Biofouling

Polymers ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 1014 ◽  
Author(s):  
Eric Schönemann ◽  
André Laschewsky ◽  
Erik Wischerhoff ◽  
Julian Koc ◽  
Axel Rosenhahn
Keyword(s):  
Structural Diversity ◽  
Negative Control ◽  
Butyl Methacrylate ◽  
Structure Property ◽  
High Molar Mass ◽  
Zwitterionic Polymers ◽  
Chemical Structures ◽  
Structure Property Relationships ◽  
Repeat Units ◽  
The Individual

Films of zwitterionic polymers are increasingly explored for conferring fouling resistance to materials. Yet, the structural diversity of polyzwitterions is rather limited so far, and clear structure-property relationships are missing. Therefore, we synthesized a series of new polyzwitterions combining ammonium and sulfate groups in their betaine moieties, so-called poly(sulfabetaine)s. Their chemical structures were varied systematically, the monomers carrying methacrylate, methacrylamide, or styrene moieties as polymerizable groups. High molar mass homopolymers were obtained by free radical polymerization. Although their solubilities in most solvents were very low, brine and lower fluorinated alcohols were effective solvents in most cases. A set of sulfabetaine copolymers containing about 1 mol % (based on the repeat units) of reactive benzophenone methacrylate was prepared, spin-coated onto solid substrates, and photo-cured. The resistance of these films against the nonspecific adsorption by two model proteins (bovine serum albumin—BSA, fibrinogen) was explored, and directly compared with a set of references. The various polyzwitterions reduced protein adsorption strongly compared to films of poly(n‑butyl methacrylate) that were used as a negative control. The poly(sulfabetaine)s showed generally even somewhat higher anti-fouling activity than their poly(sulfobetaine) analogues, though detailed efficacies depended on the individual polymer–protein pairs. Best samples approach the excellent performance of a poly(oligo(ethylene oxide) methacrylate) reference.

scholarly journals Functional Materials Based on Cyclometalated Platinum(II) β-Diketonate Complexes: A Review of Structure–Property Relationships and Applications

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4236
Author(s):  
Ashanul Haque ◽  
Hani El Moll ◽  
Khalaf M. Alenezi ◽  
Muhammad S. Khan ◽  
Wai-Yeung Wong
Keyword(s):  
Photophysical Properties ◽  
Functional Materials ◽  
Polymeric Materials ◽  
Organometallic Complexes ◽  
Structure Property ◽  
Covalent Bonds ◽  
Ancillary Ligands ◽  
Structure Property Relationships ◽  
Materials Research ◽  
Recent Developments

Square planar organoplatinum(II) complexes have garnered immense interest in the area of materials research. The combination of the Pt(II) fragment with mono-, bi- tri- and tetradentate organic ligands gives rise to a large variety of complexes with intriguing properties, especially cyclometalated Pt(II) complexes in which ligands are connected through covalent bonds demonstrate higher stability, excellent photoluminescence properties, and diverse applications. The properties and applications of the Pt(II)-based materials can be smartly fine-tuned via a judicious selection of the cyclometalating as well as ancillary ligands. In this review, attempts have been made to provide a brief review of the recent developments of neutral Pt(II) organometallic complexes bearing bidentate cyclometalating ligands and β-diketonate ancillary ligands, i.e., (C^N)Pt(O^O) and (C^C)Pt(O^O) derivatives. Both small (monomeric, dimeric) and large (polymeric) materials have been considered. We critically assessed the role of functionalities (ligands) on photophysical properties and their impact on applications.

Structure-property relationships of PE/PP sandwiched films

1987 ◽  
Vol 45 ◽  
pp. 454-455
Author(s):  
J. Petermann ◽  
G. Broza ◽  
U. Rieck ◽  
A. Jaballah ◽  
A. Kawaguchi
Keyword(s):  
Mechanical Tests ◽  
Polymer Materials ◽  
Ionic Crystals ◽  
Structure Property ◽  
Polymer Systems ◽  
Structure Property Relationships ◽  
Oriented Films ◽  
Materials Used ◽  
Polymer Laminates ◽  
Heated Glass

Oriented overgrowth of polymer materials onto ionic crystals is well known and recently it was demonstrated that this epitaxial crystallisation can also occur in polymer/polymer systems, under certain conditions. The morphologies and the resulting physical properties of such systems will be presented, especially the influence of epitaxial interfaces on the adhesion of polymer laminates and the mechanical properties of epitaxially crystallized sandwiched layers.Materials used were polyethylene, PE, Lupolen 6021 DX (HDPE) and 1810 D (LDPE) from BASF AG; polypropylene, PP, (PPN) provided by Höchst AG and polybutene-1, PB-1, Vestolen BT from Chemische Werke Hüls. Thin oriented films were prepared according to the method of Petermann and Gohil, by winding up two different polymer films from two separately heated glass-plates simultaneously with the help of a motor driven cylinder. One double layer was used for TEM investigations, while about 1000 sandwiched layers were taken for mechanical tests.

Approaches for TEM imaging of cavitation in toughened nylon

1989 ◽  
Vol 47 ◽  
pp. 352-353
Author(s):  
Barbara A. Wood
Keyword(s):  
Morphological Characteristics ◽  
Structure Property ◽  
Polymer Systems ◽  
Selective Staining ◽  
Structure Property Relationships ◽  
Rubber Toughened ◽  
Shear Yield ◽  
Controversial Topic ◽  
Selection Of ◽  
Diamond Knife

A controversial topic in the study of structure-property relationships of toughened polymer systems is the internal cavitation of toughener particles resulting from damage on impact or tensile deformation.Detailed observations of the influence of morphological characteristics such as particle size distribution on deformation mechanisms such as shear yield and cavitation could provide valuable guidance for selection of processing conditions, but TEM observation of damaged zones presents some experimental difficulties.Previously published TEM images of impact fractured toughened nylon show holes but contrast between matrix and toughener is lacking; other systems investigated have clearly shown cavitated impact modifier particles. In rubber toughened nylon, the physical characteristics of cavitated material differ from undamaged material to the extent that sectioning of heavily damaged regions by cryoultramicrotomy with a diamond knife results in sections of greater than optimum thickness (Figure 1). The detailed morphology is obscured despite selective staining of the rubber phase using the ruthenium trichloride route to ruthenium tetroxide.

Catalyst Halogenation Enables Rapid and Efficient Polymerizations with Visible to Near-Infrared Light

2020 ◽  
Author(s):  
Alex Stafford ◽  
Dowon Ahn ◽  
Emily Raulerson ◽  
Kun-You Chung ◽  
Kaihong Sun ◽  
...  
Keyword(s):  
Near Infrared ◽  
Transient Absorption ◽  
Reaction Times ◽  
Infrared Light ◽  
Structure Property ◽  
Light Emitting ◽  
Structure Property Relationships ◽  
Nir Light ◽  
Light Intensities ◽  
Emission Quenching

Driving rapid polymerizations with visible to near-infrared (NIR) light will enable nascent technologies in the emerging fields of bio- and composite-printing. However, current photopolymerization strategies are limited by long reaction times, high light intensities, and/or large catalyst loadings. Improving efficiency remains elusive without a comprehensive, mechanistic evaluation of photocatalysis to better understand how composition relates to polymerization metrics. With this objective in mind, a series of methine- and aza-bridged boron dipyrromethene (BODIPY) derivatives were synthesized and systematically characterized to elucidate key structure-property relationships that facilitate efficient photopolymerization driven by visible to NIR light. For both BODIPY scaffolds, halogenation was shown as a general method to increase polymerization rate, quantitatively characterized using a custom real-time infrared spectroscopy setup. Furthermore, a combination of steady-state emission quenching experiments, electronic structure calculations, and ultrafast transient absorption revealed that efficient intersystem crossing to the lowest excited triplet state upon halogenation was a key mechanistic step to achieving rapid photopolymerization reactions. Unprecedented polymerization rates were achieved with extremely low light intensities (< 1 mW/cm<sup>2</sup>) and catalyst loadings (< 50 μM), exemplified by reaction completion within 60 seconds of irradiation using green, red, and NIR light-emitting diodes.

A Review on Camptothecin Analogs with Promising Cytotoxic Profile

2019 ◽  
Vol 18 (13) ◽  
pp. 1796-1814 ◽  
Author(s):  
Sk. Abdul Amin ◽  
Nilanjan Adhikari ◽  
Tarun Jha ◽  
Shovanlal Gayen
Keyword(s):  
Cell Lines ◽  
Cancer Cell ◽  
Cancer Cell Lines ◽  
Structure Property ◽  
Cytotoxic Potential ◽  
Structure Property Relationships ◽  
Structure Activity ◽  
Camptothecin Analogs ◽  
Pharmacokinetic Properties ◽  
Quantitative Structure Activity Relationships

Camptothecin (CPT), obtained from Camptotheca acuminata (Nyssaceae), is a quinoline type of alkaloid. Apart from various traditional uses, it is mainly used as a potential cytotoxic agent acting against a variety of cancer cell lines. Though searches have been continued for last six decades, still it is a demanding task to design potent and cytotoxic CPTs. Different CPT analogs are synthesized to enhance the cytotoxic potential as well as to increase the pharmacokinetic properties of these analogs. Some of these analogs were proven to be clinically effective in different cancer cell lines. In this article, different CPT analogs have been highlighted extensively to get a detail insight about the structure-property relationships as well as different quantitative structure-activity relationships (QSARs) modeling of these analogs are also discussed. This study may be beneficial for designing newer CPT analogs in future.

Structure-property relationships in bainitic steels

1990 ◽  
Vol 21 (6) ◽  
pp. 1527-1540 ◽  
Author(s):  
D. V. Edmonds ◽  
R. C. Cochrane
Keyword(s):  
Structure Property ◽  
Structure Property Relationships ◽  
Bainitic Steels
Sign in / Sign up

Export Citation Format

Share Document