scholarly journals Soybean seed origin effects on physiological and sanitary quality and crop yield

2019 ◽  
Vol 40 (5) ◽  
pp. 1789 ◽  
Author(s):  
Eduardo Silvestrini Tonello ◽  
Nataliê Luíse Fabbian ◽  
Deivid Sacon ◽  
Aline Netto ◽  
Vanessa Neumann Silva ◽  
...  

The suitable establishment of a crop depends on seed quality, among another factors. However, with high production costs many producers use uncertified seeds, to reduce expenses with this input at sowing time. The objective was to evaluate germination, vigor and health of soybean seeds, diseases incidence in cvs. NS 5445 IPRO and BMX Ativa RR, whose seeds were of certified and uncertified origins, as well as yield components and grain yield of soybeans, with or without fungicides application. The experiments were conducted in the 2015/16 and 2016/17 crop season, in Erechim-RS. Two experiments were carried out in a completely randomized design (DIC): one in the laboratory, under a 2 x 2 factorial scheme (cultivar x origin); and another in the field in a homogeneous area, in a 2 x 2 factorial scheme (with/without fungicide application and certified/uncertified seed) for two cultivars, both with four replications. The variables evaluated were: germination and seed health, yield (kg ha-1), thousand grains weight (g), number of grains per plant, and incidence of foliar fungal diseases. The main fungi identified in seeds were Aspergillus sp., Penicillium sp. and Fusarium sp. The highest incidence percentage were obtained in uncertifed seeds, at two harvests. Both cultivars and origins presented the minimum germination required for commercialization, however, certified seeds had better performance for seed vigor. As for normal seedlings, there was a significant difference only for the 2016/17 crop season, with the highest percentage obtained in certified seeds (52.0% for NS 5445 and 73.5% for BMX Ativa). Best productivity was achieved with cultivation of certified seeds associated with fungicides in both crops and cultivars. For thousand grains weight (TGW) there was no difference in origin, but only for cultivar and fungicides apply. The number of grains per plant was higher in plants from certified seeds and that received fungicides, being cv. BMX Ativa the most responsive for the two harvests analyzed. The main diseases found in the two harvests were: Asian rust, powdery mildew, mildew, septoriosis and cercosporiosis. However, seed origin, in both crops, did not differ in the incidence of Asian rust, powdery mildew and mildew, but for septoriosis and cercosporiosis, considered soybean late season diseases, seed origin is a determining fator.

2017 ◽  
Vol 38 (1) ◽  
pp. 57
Author(s):  
Daniele Piano Rosa ◽  
Danúbia Aparecida Costa Nobre ◽  
Diego Santos Oliveira ◽  
Francisco Charles dos Santos Silva ◽  
André Ricardo Gomes Bezerra ◽  
...  

This study aimed to assess the effect of genetic diversity on physiological quality of soybean seeds stored in cold chamber and under environmental conditions. Ten cultivars were assessed in a randomized factorial design (2x10). Factor 1 corresponded to two storage conditions and factor 2 to ten soybean cultivars, with four replications. The evaluated variables were total germination (G%), first count of germination (F%), percentage of abnormal seedlings (AS%), germination speed index (GSI), water content (WC), electrical conductivity (EC), dry matter of seedlings (DMS) and length of seedlings (LS). Data underwent ANOVA, followed by Scott Knott test, as well as multivariate analysis of genetic diversity. The results showed a higher physiological quality for seeds under cold storage. Half of the cultivars (FPS Júpiter, FPS Urano, FPS Antares, FPS Netuno and CD 250) presented high germination rates and seed vigor, being thus indicated as high-standard materials for further breeding programs. Besides that, storage environment had influence on the clustering of soybean cultivars. Moreover, cultivars had genetic dissimilarity for almost all assessed traits as G%, GSI, F%, AS%, EC, DMS and LS.


2010 ◽  
Vol 67 (5) ◽  
pp. 540-545 ◽  
Author(s):  
Bruno Guilherme Torres Licursi Vieira ◽  
Roberval Daiton Vieira ◽  
Francisco Carlos Krzyzanowski ◽  
José de Barros França Neto

The growing demand for high quality soybean [Glycine max (L.) Merrill] seeds requires a precise seed quality control system from the seed industry. One way to accomplish this is by improving vigor testing. Cold test has been traditionally employed for corn seeds. However, it has also been used for other seed crops such as cotton (Gossypium spp.), soybean (Glycine Max), dry bean (Phaseolus vulgaris) and pea (Pisum sativum). This study was carried out with the objective of adjusting an alternative procedure for the cold test to determine soybean seed vigor. Six commercial soybean seed lots of the cultivar BRS 133 were used. The physiological potential of the seed lots was evaluated by germination on paper towel and sand box, seedling field emergence, tetrazolium, accelerated aging and electrical conductivity tests. Seed moisture content was also determined. The temperature used for the cold test procedures was 10ºC during five days. Four cold test procedures were evaluated: i) plastic boxes with soil; ii) rolled paper towel with soil; iii) rolled paper towel without soil, and iv) an alternative procedure, using rolled paper towel without soil under cold water. A completely randomized experimental design with eight replications was used and the means were compared by the Tukey test (p = 0.05). To verify the dependence between the alternative test and others single linear correlation was used. All cold test procedures had similar coefficients of variation (CV), highlighting that rolled paper towel with soil and the alternative procedure had the best performance, with an average of 94% and 93% normal seedlings and CV of 3.2% and 3.6%, respectively. The alternative procedure has satisfactory results for estimating soybean seed vigor, yielding consistent results compared to the traditional procedure.


2016 ◽  
Vol 37 (3) ◽  
pp. 1219
Author(s):  
Danúbia Aparecida Costa Nobre ◽  
Carlos Sigueyuki Sediyama ◽  
Valter Arthur ◽  
Newton Deniz Piovesan ◽  
Alisson Santos Lopes da Silva

High quality seeds are required for soybean production. This study evaluated the effect of gamma irradiation and storage time on seed quality in soybean lines VX04-6828 and VX04-5692. Seeds were gamma irradiated (60Co) with 0, 50, 150, and 250 Gy. After the first seed production cycle (M1), the harvested seeds were stored in the laboratory for 0, 2, 4, and 6 months. Moisture content, seed quality (germination rate, dead seeds, and normal and abnormal seedlings), and seed vigor (first germination count, germination index, and seedling length) were determined. Data were submitted to analysis of variance for each soybean line using a 4 x 4 factorial design (four storage times x four gamma irradiation doses). Response surfaces were constructed based on the F test significance (p ? 0.05). VX04-5692 seeds were more sensitive to gamma radiation than were VX04-6828 seeds. Soybean seed quality was highest in M2 seeds derived from seeds irradiated with less than 100 Gy and stored for up to two months. High gamma irradiation doses and long storage times reduced soybean seed quality.


2018 ◽  
Vol 1 (1) ◽  
pp. 25-31
Author(s):  
P.K. Dewi Hayati

Soybeans undergo rapid deterioration due to its chemical composition and unfavourable storage conditions. The objective of the research was to determine the length period of seed hidration and dehydration which is integrated with rhizobateri to viability and vigor of deteriorated soybean seed.  A completely randomized design with four replicates were used in this experiment. Seeds were treated with varied combination of hydration period in a rhizobacteria suspension and followed by dehydration time.  Data were analysed using the F-test and significant differences were further tested with Least Significant Difference at the 5% level. Results showed that the hydration and dehydration period of seeds in a rhizobacteria suspension improved viability and vigor of seed which have 59.5% initial germination percentage. The improvement was 12.28%, 0.56, 25.4% and 1.4 days for standard germination test, vigor index, first count test percentage and T50, respectively. The hydration for 60 minutes followed by dehydration for 60 minutes gave the best results on seed viability and vigor.


Jurnal Agro ◽  
2022 ◽  
Vol 8 (2) ◽  
pp. 178-187
Author(s):  
Agustiansyah Agustiansyah ◽  
Paul B Timotiwu ◽  
Nabila Lutfiah

Kandungan aluminium yang tinggi pada tanah Ultisol merupakan salah satu masalah utama dalam budidaya tanaman kedelai mulai dari fase perkecambahan hingga pertumbuhan tanaman. Perlakuan priming pada benih diyakini mampu memperbaiki perkecambahan pada lingkungan yang kurang menguntungkan. Penelitian dilakukan untuk mengetahui pengaruh priming pada perkecambahan benih kedelai yang dikecambahkan dalam media masam dan mengandung aluminium. Penelitian disusun dalam Rancangan Acak Lengkap (RAL) pola faktorial. Faktor pertama adalah jenis priming : tanpa priming, H2O (air), KNO3 1%, KNO3 2%, GA3 50 ppm, GA3 100 ppm, dan PEG 6000 7,5%. Faktor kedua adalah varietas kedelai yaitu: Anjasmoro, Burangrang, dan Grobogan. Data dianalisis sidik ragamnya dan dilanjutkan dengan uji Beda Nyata Jujur (BNJ) 5% menggunakan program statistika R Studio. Hasil penelitian menunjukkan priming PEG 7,5% dan varietas Burangrang secara mandiri merupakan perlakuan terbaik untuk meningkatkan vigor benih kedelai berdasarkan variabel waktu muncul kecambah, kecepatan perkecambahan, dan panjang hipokotil. Implikasi penelitian ini adalah PEG 7,5% dapat digunakan untuk perbaikan perkecambahan pada tanah masam dengan kandungan aluminium yang relatif tinggi. High aluminium content in Ultisol is the main problem in soybean cultivation from germination to planting growth phases.Priming treatment is believed to improve seed germination in a poor-growing environment. This study aimed to determine the effect of priming of soybean seeds germinated under acid medium and aluminium stress. The experimental design used was Completely Randomized Design (CRD) with factorial pattern. The first factor was priming type : no priming, H2O (water), 1% KNO3, 2% KNO3, 50 ppm GA3, 100 ppm GA3, and 7.5% PEG 6000. The second factor was soybean variety : Anjasmoro, Burangrang, and Grobogan.  The data obtained were analyzed using the R Studio statistic program with a 5% HSD test. The study resulted that each PEG 7.5% priming and Burangrang  variety independently was the best in increasing soybean seed vigor based on sprout time emergence, germination speed and hypocotyl length. This research implicates that PEG 7.5% can be used to improve seed germination on acid soils with high aluminium content. 


2019 ◽  
Vol 41 (4) ◽  
pp. 506-513
Author(s):  
Rafael Vergara ◽  
Raimunda Nonata Oliveira da Silva ◽  
Arieli Paula Nadal ◽  
Gizele Ingrid Gadotti ◽  
Tiago Zanatta Aumonde ◽  
...  

Abstract: Soybean is one of the leading commodities in Brazilian agribusiness. Its cultivation is widespread in different seed-producing regions of the country, where it generates income and local development. In this context, the soybean seed is a fundamental input, as its quality strongly influences the success of the crop. However, the period after the achievement of physiological maturity is critical for the maintenance of seed quality. For that reason, this study aimed at evaluating the effect of harvest delay on both the initial and final qualities of soybean seeds. The research consisted of four harvest times, in which the initial quality was assessed through tests of first germination count, germination, accelerated aging and tetrazolium. After 120 days of storage, the germination and accelerated aging tests were once again conducted. The experiment complied with a completely randomized block design with eight replications. The rainfall was monitored during the pre-harvest phase. All variables experienced negative impacts due to the delay in harvesting. Also, the seeds suffered more damage as the delay progressed, and the variables germination and seed vigor decreased after the storage period.


2021 ◽  
Vol 51 (7) ◽  
Author(s):  
Michele Renata Revers Meneguzzo ◽  
Géri Eduardo Meneghello ◽  
Ariele Paula Nadal ◽  
Fernanda da Mota Xavier ◽  
Simone Morgan Dellagostin ◽  
...  

ABSTRACT: The differentiation of seedling growth and development is the result of the vigor level of the seed lot. Because of this, knowing the seedling growth curve is essential for the evaluation of the seedling length test, to be carried out at the moment when any differences in vigor really manifest, thus being able to reduce the time of evaluation of the test. In this research, the objective was to determine the most efficient time interval to perform the seedling length test in soybean seeds, depending on the vigor levels. The evaluated characteristics were percentage of seed germination, first germination count, emergency, days for emergence, aerial, root and total length (evaluated every 12 hours), aerial, root and total dry mass in completely randomized design. High vigor seeds originated seedlings with higher growth rates (cm. h-1), with vigor being one of the factors that interfere in the seedling length test. After 96 hours of the seedling length test, there was a statistical differentiation between the three vigor levels tested. The soybean seedling length test between lots, with different vigor, can be performed 96 hours after sowing.


Plants ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 993
Author(s):  
Richard E. Turner ◽  
M. Wayne Ebelhar ◽  
Teresa Wilkerson ◽  
Nacer Bellaloui ◽  
Bobby R. Golden ◽  
...  

Purple seed stain disease, caused by (Cercospora kukuchii), is a major concern in soybean (Glycine max (L.)) in Mississippi, USA, due to its effects on seed quality, reducing soybean seed grade and potential market price at elevators. Therefore, investigating the effects of purple seed stain (PSS) on seed quality (germination and vigor) and seed composition (nutrition) is critical. The objective of this study was to investigate the effects of PSS on seed harvest index, seed germination, seed vigor, and seed composition components (protein, oil, fatty acids, and sugars). A field experiment was initiated in 2019 in Stoneville, MS, at the Delta Research and Extension Center (DREC) on a Commerce silt loam soil (fine-silty, mixed, superactive, nonacid, thermic Fluventic Epiaquepts). Soybean variety Credenz 4748 LL was used. The results showed that infected (symptomatic) seed had a 5.5% greater Seed Index (based on 100 seed weight) when compared to non-infected (non-symptomatic, as control) seed. Non-infected seed had greater percent germination and seedling vigor when compared to infected seed. Germination was 30.9% greater and vigor was 58.3% greater in non-infected seed. Also, the results showed that infected seed with PSS had higher protein content and some amino acids. No changes in total oil and fatty acids. Sucrose and stachyose were lower in infected seed than in non-infected seed. The research showed that PSS impacted seed health and seed quality (germination and vigor) and seed composition (protein, sugars, and some amino acids). Purple stained seed should be avoided when planting and should be managed properly as low germination is a potential risk. Planting population should be adjusted accordingly due to lack of germination and vigor if PSS is present. This research help growers for purple seed management, and scientists to further understand the potential negative impact on seed quality and nutrition. Further research is needed before conclusive recommendations are made.


2014 ◽  
Vol 36 (3) ◽  
pp. 273-281 ◽  
Author(s):  
Carolina Maria Gaspar de Oliveira ◽  
Francisco Carlos Kryzanowski ◽  
Maria Cristina Neves de Oliveira ◽  
José de Barros França-Neto ◽  
Ademir Assis Henning

The aim of this study was to evaluate the influence of pod wall permeability on the physiological quality of soybean seed. The cultivars studied were Sant'Ana, FT-2, FT-10, Bossier, Davis and the breeding line F 84-7-30, with a black seed coat. Pods were collected from plants at the R4, R5, R6, R7 and R8 development stages, which composed the treatments in regard to time of harvest. The parameters of permeability and the lignin content of the pods and the seeds within the pods were evaluated. The seeds were collected just after full maturity (R8), and the following tests were performed: germination, electrical conductivity, and tetrazolium, which determined seed viability and vigor. A randomized complete block design in a split-plot in time arrangement was used, with four replications per treatment. The soybean genotypes (six) composed the plots, and the split-plots consisted of the development stages (R4, R5, R6, R7 and R8). In seed evaluation, the same design was used, reducing the number of treatments to three in the split-plots (R6, R7 and R8). Pod permeability varied with the genotype and stage of development; this affected seed vigor, but not the viability of newly-harvested seeds. The pod lignin content did not show any influence on pod permeability.


2014 ◽  
Vol 36 (2) ◽  
pp. 213-221 ◽  
Author(s):  
Juliana Tieme Yagushi ◽  
Denis Santiago Costa ◽  
José de Barros França-Neto

Seed deterioration causes losses to seed companies during the storage. For researches, the challenge has been to develop techniques which improve the seed longevity as well as laboratory analysis methods required for evaluating the evolution of deterioration in storage. This study had the objective of determining the effectiveness of the accelerated aging test with a saturated NaCl solution and Seed Vigor Imaging System (SVIS) analysis in checking soybean seed physiological in comparison with the recommended vigor tests. Soybean seeds from the cultivars BRS 184 and M-Soy 7908 RR were used, each of them were represented by six lots and stored for six months under two environment conditions. Seed physiological quality was checked every two months in storage through germination evaluations, accelerated aging (different methods), tetrazolium test (vigor and viability) seedling emergence, and SVIS analysis. The tetrazolium test is the most advisable method for evaluating soybean seed quality during storage. The results of the saturated salt accelerated aging test with NaCl at 41 ºC for 72 or 96 hours and the SVIS evaluation are also both efficient for estimating the physiological potential of seeds.


Sign in / Sign up

Export Citation Format

Share Document