The validity and reliability of the “My Jump App” for measuring jump height of the elderly

Background The ability to jump has been related to muscle strength and power, speed and amplitude of the lower limbs movements, and specifically for the elderly, the vertical jump has been shown to be a good predictor of functional capacity and risk of falling. The use of a mobile application (App) which can measure the vertical jump (i.e., iPhone App My Jump) has recently emerged as a simple, cheap and very practical tool for evaluation of jump ability. However, the validity of this tool for the elderly population has not been tested yet. The elderly usually perform very low jumps and therefore the signal-to-noise ratio may compromise the validity and reliability of this method. Thus, the aim of the current study was to verify the validity and reliability of the iPhone App “My Jump” for the evaluation of countermovement jump (CMJ) height within an elderly population. Methods After familiarization, 41 participants performed three CMJs assessed via a contact mat and the My Jump App. The intraclass correlation coefficient (ICC) was used to verify the relative reliability, while the coefficient of variation (CV%) and the typical error of measurement (TEM) were used to verify the absolute reliability. Pearson’s correlation coefficient was used to verify the strength of the relationship between methods (i.e., concurrent validity), a Bland–Altman plot to show their agreement, and the Student’s t-test to identify systematic bias between them. For reliability analyses, all jumps were considered (i.e., 123). All jumps (i.e., 123), the average height of each attempt (i.e., 41), and the highest jump, were considered for validity analyses. Results The CMJ height of the highest jump was 10.78 ± 5.23 cm with contact mat, and 10.87 ± 5.32 with My Jump App, with an identified systematic bias of 0.096 cm (P = 0.007). There was a nearly perfect correlation between methods (r = 0.999; P = 0.000, in all cases) with a very good agreement observed (0.3255 to −0.5177 cm, 0.2797 to −0.5594 cm, and 0.3466 to −0.6264 cm, for highest jump height, average jump height, and all jump heights, respectively). The ICC of the My Jump App was 0.948, the TEM was 1.150 cm, and the CV was 10.10%. Conclusion Our results suggest that the My Jump App is a valid and reliable tool compared to the contact mat for evaluating vertical jump performance in the elderly. Therefore, it allows a simple and practical assessment of lower limbs’ power in this population. For the elderly, as well as for other populations with low jumping heights, the highest jump height and the average jump height could be used indistinctly.

Download Full-text

Concurrent Validity and Reliability of My Jump 2 App for Measuring Vertical Jump Height in Recreationally Active Adults

Applied Sciences ◽

10.3390/app10113805 ◽

2020 ◽

Vol 10 (11) ◽

pp. 3805 ◽

Cited By ~ 1

Author(s):

Špela Bogataj ◽

Maja Pajek ◽

Slobodan Andrašić ◽

Nebojša Trajković

Keyword(s):

Concurrent Validity ◽

Female Athletes ◽

Vertical Jump ◽

Intraclass Correlation ◽

Jump Height ◽

Validity And Reliability ◽

Retest Reliability ◽

Study Results ◽

Test Retest Reliability ◽

Active Adults

This study aimed to examine the reliability, validity, and usefulness of the smartphone-based application, My Jump 2, against Optojump in recreationally active adults. Participants (18 women, 28.9 ± 5.6 years, and 26 men, 30.1 ± 10.6 years) completed squat jumps (SJ), counter-movement jumps (CMJ), and CMJ with arm swing (CMJAS) on Optojump and were simultaneously recorded using My Jump 2. To evaluate concurrent validity, jump height, calculated from flight time attained from each device, was compared for each jump type. Test-retest reliability was determined by replicating data analysis of My Jump 2 recordings on two occasions separated by two weeks. High test-retest reliability (Intraclass correlation coefficient (ICC) > 0.93) was observed for all measures in both male and female athletes. Very large correlations were observed between the My Jump 2 app and Optojump for SJ (r = 0.95, p = 0.001), CMJ (r = 0.98, p = 0.001), and CMJAS (r = 0.98, p = 0.001) in male athletes. Similar results were obtained for female recreational athletes for all jumps (r > 0.94, p = 0.001). The study results suggest that My Jump 2 is a valid, reliable, and useful tool for measuring vertical jump in recreationally active adults. Therefore, due to its simplicity and practicality, it can be used by practitioners, coaches, and recreationally-active adults to measure vertical jump performance with a simple test as SJ, CMJ, and CMJAS.

Download Full-text

Concurrent Validity and Reliability of Three Ultra-Portable Vertical Jump Assessment Technologies

Sensors ◽

10.3390/s20247240 ◽

2020 ◽

Vol 20 (24) ◽

pp. 7240

Author(s):

Casey M. Watkins ◽

Ed Maunder ◽

Roland van den Tillaar ◽

Dustin J. Oranchuk

Keyword(s):

Repeated Measures ◽

Contact Time ◽

Vertical Jump ◽

Force Plate ◽

Field Analysis ◽

Systematic Bias ◽

Jump Height ◽

Validity And Reliability ◽

Drop Jumps ◽

Set Up

Vertical jump is a valuable training, testing, and readiness monitoring tool used across a multitude of sport settings. However, accurate field analysis has not always been readily available or affordable. For this study, two-dimensional motion capture (Mo-Cap), G-Flight micro-sensor, and PUSH accelerometer technologies were compared to a research-grade force-plate. Twelve healthy university students (7 males, 5 females) volunteered for this study. Each participant performed squat jumps, countermovement jumps, and drop jumps on three separate occasions. Between-device differences were determined using a one-way repeated measures ANOVA. Systematic bias was determined by limits of agreement using Bland–Altman analysis. Variability was examined via the coefficient of variation, interclass correlation coefficient, and typical error of measure. Dependent variables included jump height, contact-time, and reactive strength index (RSI). Mo-Cap held the greatest statistical similarity to force-plates, only overestimating contact-time (+12 ms). G-Flight (+1.3–4 cm) and PUSH (+4.1–4.5 cm) consistently overestimate jump height, while PUSH underestimates contact-time (−24 ms). Correspondingly, RSI was the most valid metric across all technologies. All technologies held small to moderate variably; however, variability was greatest with the G-Flight. While all technologies are practically implementable, practitioners may want to consider budget, athlete characteristics, exercise demands, set-up, and processing time before purchasing the most appropriate equipment.

Download Full-text

Validity and reliability of the WIMU inertial device for the assessment of the vertical jump

PeerJ ◽

10.7717/peerj.4709 ◽

2018 ◽

Vol 6 ◽

pp. e4709 ◽

Cited By ~ 8

Author(s):

José Pino-Ortega ◽

Javier García-Rubio ◽

Sergio J. Ibáñez

Keyword(s):

Correlation Coefficient ◽

Pearson Correlation ◽

Vertical Jump ◽

Intraclass Correlation ◽

Flight Time ◽

Soccer Players ◽

Validity And Reliability ◽

Squat Jump ◽

Health Technologies ◽

Counter Movement Jump

The aim of this study was to test the validity and reliability of the inertial device WIMU (Realtrack Systems SL, Almería, Spain) for the assessment of the vertical jump, counter movement jump (CMJ) and squat jump (SJ). Fifteen soccer players were evaluated in two identical sessions separated by one week. In each session, participants performed three jumps of each type. The flight time was quantified by the inertial device WIMU and by a force platform (Twin Plates; Globus Sport and Health Technologies LLC, Codogné, Italy) at the same time. For the analysis of reliability of the flight time of the CMJ and the SJ, the intraclass correlation coefficient was used. The calculation of the concurrent validity was performed by using the Pearson correlation coefficient (r). This analysis was complemented with the realization of the Bland–Altman plots. For the analysis of reliability, the coefficient of variation and the standard error of the means were calculated. The analysis presented a high validity and reliability of the device. The results show the inertial device WIMU (Realtrack Systems SL, Almería, Spain) as a useful tool for measuring the jump capacity of the athletes, presenting immediate results in real time, on any type of surface and in a simple way since it does not need cables.

Download Full-text

AGREEEMENT BETWEEN MEASUREMENT OF JUMP HEIGHT IN DIFFERENT VERTICAL JUMP TESTS EXECUTED BY YOUNG FOOTBALL PLAYERS

Journal of Applied Sports Sciences ◽

10.37393/jass.2020.02.4 ◽

2020 ◽

Vol 2 (2020) ◽

pp. 51-63

Author(s):

Marin Gadev ◽

◽

Petar Peev ◽

Oleg Hristov ◽

◽

...

Keyword(s):

Vertical Jump ◽

Energy System ◽

Lower Limbs ◽

Football Players ◽

Systematic Bias ◽

Jump Height ◽

Explosive Power ◽

Vertical Jump Height ◽

Counter Movement Jump ◽

Anaerobic Energy

ABSTRACT Football is an intermittent sport with a great number of short and explosive actions. These characteristics of the game require a good level of anaerobic power. The main field tests used as indicators of the development of the anaerobic energy system were the jumps in the vertical plane. The same tests also measured the strength of the lower limbs. We presume that the explosive power of the lower limbs characterizes the development of the alactic anaerobic energy system and strength capacity at the same time. In that case the explosive power of the lower limbs was an important component of the conditioning and strength training of football players. There was a great variety of methods and devices which registered vertical jump height. From this point of view, we wanted to add our study to the research work in the specialized literature. The purpose of this study was to analyze the differences of the jump height measured via two devices. We used the following methods of research: accelerometry, chronometry and statistical analysis. We studied the vertical jump height of 32 football players of the Youth Academy of PFC “Levski”– Sofi a at the age of 13,4. In the research the participants performed three jump tests (squat jump [SJ], counter movement jump [CMJ] and counter movement jump with arm swing [CMJA]) as the jump height was measured via accelerometer and Infrared platform. The results from these two devices were compared via Bland Altman plot and calculation of Intraclass correlation coefficients [ICC]. The results of ICC between the two devices showed very strong correlation of the results for the three tests (SJ (R= .91), CMJ (R= .92) and CMJA (R= .87)). The results of the ANOVA showed statistical difference between the measured jump heights (p< .05 for all test, systematic bias was equal to: SJ=15.6; CMJ=15.2; CMJA= 19.5 and effect size (η2) was large SJ= .65; CMJ= .69; CMJA= .65) for the three different types of jump. Conclusions:1) Both of the devices showed good consistency of the collected results; 2) The data collected from the two devices showed significant difference of the jump heights.

Download Full-text

Validity and Reliability of the Informant Questionnaire on Cognitive Decline in the Elderly (IQCODE)

GeroPsych ◽

10.1024/1662-9647/a000209 ◽

2019 ◽

Vol 32 (3) ◽

pp. 145-151

Author(s):

Mahshid Foroughan ◽

Zahra Jafari ◽

Ida Ghaemmagham Farahani ◽

Vahid Rashedi

Keyword(s):

Psychometric Properties ◽

Elderly Population ◽

Formal Education ◽

The Elderly ◽

Cognitive State ◽

Validity And Reliability ◽

Internal Reliability ◽

Dsm Iv ◽

Test Retest Reliability ◽

Farsi Version

Abstract. This study examines the psychometric properties of the IQCODE and its applicability in the Iranian elderly population. A group of 95 elderly patients with at least 4 years of formal education who fulfilled the criteria of DSM-IV-TR for dementia were examined by the MMSE and the AMTs. The Farsi version of the IQCODE was subsequently administered to their primary caregivers. Results showed a significant correlation ( p = .01) between the score of the questionnaire and the results of the MMSE ( r = −0.647) and AMTs ( r = −0.641). A high internal reliability of the questionnaire was confirmed by Cronbach’s alpha coefficient (α = 0.927) and test-retest reliability by correlation coefficient ( r = 0.81). This study found that the IQCODE has acceptable psychometric properties and can be used for evaluating the cognitive state in the elderly population of Iran.

Download Full-text

Development and validation of a questionnaire measuring knowledge, attitudes, and practices (KAP) to healthy eating and activity patterns in school children (HEAPS)

Nutrition and Health ◽

10.1177/0260106020982356 ◽

2021 ◽

pp. 026010602098235 ◽

Cited By ~ 1

Author(s):

Panchali Moitra ◽

Preeti Verma ◽

Jagmeet Madan

Keyword(s):

Correlation Coefficient ◽

Healthy Eating ◽

School Children ◽

Content Validity ◽

Activity Patterns ◽

Intraclass Correlation ◽

Validity And Reliability ◽

Attitudes And Practices ◽

Item Content ◽

Knowledge Attitudes And Practices

Background: Development of culturally appropriate and psychometrically sound instruments that measure knowledge and health behaviors of children will help to inform appropriate interventions. Aim: To develop and test the validity and reliability of a questionnaire measuring knowledge, attitudes, and practices to healthy eating and activity patterns in school children in India. Methods: Review of literature, focus-group discussions, and theoretical constructs of the Health Belief Model guided the development of an item pool. Face and content validity were assessed by children and a panel of experts and the item content validity, item difficulty, and discrimination indices were calculated. Construct validity was determined using the principal axis method of exploratory factor analysis among a cross-sectional sample of children ( n=252). Internal consistency (Cronbach α values >0.7) and test-retest reliability (intraclass correlation coefficient values >0.75) were estimated. Results: Item content validity index for clarity and relevance were satisfactory (>0.80) and internal consistency for knowledge (Kuder-Richardson 20 = 0.832), attitude (Cronbach’s α = 0.912), and practice items (Cronbach’s α = 0.769) were good. Four factors (children’s eating habits, family dietary practices, and consumption of healthy and unhealthy foods) and two factors (moderate to vigorous activities and sedentary activities) explained 67.7% and 48.2% of the total variance in practice items. Intraclass correlation coefficient estimates ranged from good to excellent (0.72–0.99). Conclusions: The results of the validity and reliability of the 84-item knowledge, attitudes, and practices to healthy eating and activity patterns in schoolchildren questionnaire were promising. The detailed description of the methodology employed may prove useful to researchers conducting similar studies in children.

Download Full-text

A study of the validity and reliability of the Brazilian version of the Body Shape Questionnaire (BSQ) among adolescents

Revista Brasileira de Saúde Materno Infantil ◽

10.1590/s1519-38292009000300012 ◽

2009 ◽

Vol 9 (3) ◽

pp. 331-338 ◽

Cited By ~ 82

Author(s):

Maria Aparecida Conti ◽

Táki Athanássios Cordás ◽

Maria do Rosário Dias de Oliveira Latorre

Keyword(s):

Body Image ◽

Nutritional Status ◽

Correlation Coefficient ◽

Internal Consistency ◽

Body Shape ◽

Discriminant Validity ◽

Total Population ◽

Intraclass Correlation ◽

The Body ◽

Validity And Reliability

OBJECTIVES: to produce evidence of the validity and reliability of the Body Shape Questionnaire (BSQ) - a tool for measuring an individual's attitude towards his or her body image. METHODS: the study covered 386 young people of both sexes aged between 10 and 18 from a private school and used self-applied questionnaires and anthropometric evaluation. It evaluated the internal consistency, the discriminant validity for differences from the means, according to nutritional status (underweight, eutrophic, overweight and obese), the concurrent validity by way of Spearman's correlation coefficient between the scale and the Body Mass Index (BMI), the waist-hip circumference ratio (WHR) and the waist circumference (WC). Reliability was tested using Wilcoxon's Test, the intraclass correlation coefficient and the Bland-Altman figures. RESULTS: the BSQ displayed good internal consistency (±=0.96) and was capable of discriminating among the total population, boys and girls, according to nutritional status (p<0.001). It correlated with the BMI (r=0.41; p<0.001), WHR (r=-0.10; p=0.043) and WC (r=0.24; p<0.001) and its reliability was confirmed by intraclass correlation (r=0.91; p<0.001) for the total population. The questionnaire was easy to understand and could be completed quickly. CONCLUSIONS: the BSQ presented good results, thereby providing evidence of its validity and reliability. It is therefore recommended for evaluation of body image attitudes among adolescents.

Download Full-text

Reliability and Validity of the Polar V800 Sports Watch for Estimating Vertical Jump Height

Journal of Sports Science and Medicine ◽

10.52082/jssm.2021.149 ◽

2021 ◽

pp. 149-157

Author(s):

Manuel V. Garnacho-Castaño ◽

Marcos Faundez-Zanuy ◽

Noemí Serra-Payá ◽

José L. Maté-Muñoz ◽

Josep López-Xarbau ◽

...

Keyword(s):

High Speed ◽

Vertical Jump ◽

Reliability And Validity ◽

Force Platform ◽

Systematic Bias ◽

High Speed Camera ◽

Jump Height ◽

Random Errors ◽

Physically Active ◽

Vertical Jump Height

This study aimed to assess the reliability and validity of the Polar V800 to measure vertical jump height. Twenty-two physically active healthy men (age: 22.89 ± 4.23 years; body mass: 70.74 ± 8.04 kg; height: 1.74 ± 0.76 m) were recruited for the study. The reliability was evaluated by comparing measurements acquired by the Polar V800 in two identical testing sessions one week apart. Validity was assessed by comparing measurements simultaneously obtained using a force platform (gold standard), high-speed camera and the Polar V800 during squat jump (SJ) and countermovement jump (CMJ) tests. In the test-retest reliability, high intraclass correlation coefficients (ICCs) were observed (mean: 0.90, SJ and CMJ) in the Polar V800. There was no significant systematic bias ± random errors (p > 0.05) between test-retest. Low coefficients of variation (<5%) were detected in both jumps in the Polar V800. In the validity assessment, similar jump height was detected among devices (p > 0.05). There was almost perfect agreement between the Polar V800 compared to a force platform for the SJ and CMJ tests (Mean ICCs = 0.95; no systematic bias ± random errors in SJ mean: -0.38 ± 2.10 cm, p > 0.05). Mean ICC between the Polar V800 versus high-speed camera was 0.91 for the SJ and CMJ tests, however, a significant systematic bias ± random error (0.97 ± 2.60 cm; p = 0.01) was detected in CMJ test. The Polar V800 offers valid, compared to force platform, and reliable information about vertical jump height performance in physically active healthy young men.

Download Full-text

Translation and Cross-Cultural Adaptation of the Persian Version of Minnesota Living With Heart Failure Questionnaire (MLHFQ)

ACTA MEDICA IRANICA ◽

10.18502/acta.v57i7.2330 ◽

2020 ◽

Author(s):

Behrouz Attarbashi Moghadam ◽

Hasan Tamartash ◽

Sara Fereydunnia ◽

Mahdieh Ravand

Keyword(s):

Heart Failure ◽

Correlation Coefficient ◽

Short Form ◽

Intraclass Correlation ◽

Validity And Reliability ◽

Cronbach’S Alpha ◽

Cronbach's Alpha ◽

Persian Version ◽

Sf 36 ◽

Heart Failure Questionnaire

The Minnesota Living with Heart Failure Questionnaire (MLHFQ) has been developed to measure health-related quality of life (HRQoL) status of Heart Failure (HF) patients. The aim of this study was to translate MLHFQ into the Persian version and assess the validity and reliability of the translated version. We used a forward-backward procedure for translation. In a cross-sectional study, 105 HF patients and 50 healthy subjects were selected to assess the reliability and construct validity of the instrument. The face and content validity were used to assess the questionnaire validity. Validity was examined on the HF patients group, using the Persian version of the Short form-36 health survey (SF-36) Questionnaire. In order to assess the questionnaire’s reliability, the Intraclass correlation coefficient (ICC) and Cronbach’s alpha were calculated. Test-retest reliability was examined by re-administering the MLHFQ after 2 weeks. Test-retest results demonstrated that the Persian version has excellent reliability (ICC for all 2 domains were higher than 0.91, P≤0.000). Internal consistency for Physical domain (PD), emotional domain (ED) and total scores using Cronbach’s alpha were 0.90, 0.84 and 0.92, respectively. ICC for PD, ED and total scores were 0.95, 0.94, and 0.97, respectively. Good and very good Pearson's Correlation Coefficient was seen between MLHFQ and SF-36 (r= -0.47 to -0.775, P≤0.000 for PD; r= -0.47 to -0.65, P≤0.000 for ED). The Persian version of the MLHFQ had satisfactory reliability and validity for assessing HRQoL status of Iranian HF patients. © 2019 Tehran University of Medical Sciences. All rights reserved. Acta Med Iran 2019;57(7):435-441.

Download Full-text

Valid and Reliable Barbell Velocity Estimation Using an Inertial Measurement Unit

International Journal of Environmental Research and Public Health ◽

10.3390/ijerph18179170 ◽

2021 ◽

Vol 18 (17) ◽

pp. 9170

Author(s):

Steffen Held ◽

Ludwig Rappelt ◽

Jan-Philip Deutsch ◽

Lars Donath

Keyword(s):

Inertial Measurement Unit ◽

Intraclass Correlation ◽

Correlation Coefficients ◽

Velocity Estimation ◽

Measurement Unit ◽

Systematic Bias ◽

Validity And Reliability ◽

Inertial Measurement ◽

Intraclass Correlation Coefficients ◽

Reliability Indicators

The accurate assessment of the mean concentric barbell velocity (MCV) and its displacement are crucial aspects of resistance training. Therefore, the validity and reliability indicators of an easy-to-use inertial measurement unit (VmaxPro®) were examined. Nineteen trained males (23.1 ± 3.2 years, 1.78 ± 0.08 m, 75.8 ± 9.8 kg; Squat 1-Repetition maximum (1RM): 114.8 ± 24.5 kg) performed squats and hip thrusts (3–5 sets, 30 repetitions total, 75% 1RM) on two separate days. The MCV and displacement were simultaneously measured using VmaxPro® and a linear position transducer (Speed4Lift®). Good to excellent intraclass correlation coefficients (0.91 < ICC < 0.96) with a small systematic bias (p < 0.001; ηp2 < 0.50) for squats (0.01 ± 0.04 m·s−1) and hip thrusts (0.01 ± 0.05 m·s−1) and a low limit of agreement (LoA < 0.12 m·s−1) indicated an acceptable validity. The within- and between-day reliability of the MCV revealed good ICCs (0.55 < ICC < 0.91) and a low LoA (<0.16 m·s−1). Although the displacement revealed a systematic bias during squats (p < 0.001; ηp2 < 0.10; 3.4 ± 3.4 cm), no bias was detectable during hip thrusts (p = 0.784; ηp2 < 0.001; 0.3 ± 3.3 cm). The displacement showed moderate to good ICCs (0.43 to 0.95) but a high LoA (7.8 to 10.7 cm) for the validity and (within- and between-day) reliability of squats and hip thrusts. The VmaxPro® is considered to be a valid and reliable tool for the MCV assessment.

Download Full-text