scholarly journals Effect of Beverages on Release of Paracetamol Tablet by In-vitro Dissolution Method Using Modified Media

2021 ◽  
pp. 50-57
Author(s):  
Baheti Akshay ◽  
Gothoskar Abhijit ◽  
Palkar Kanchan ◽  
Wani Manish ◽  
Polshettiwar Satish ◽  
...  
Keyword(s):  
Oral Route ◽  
In Vitro Dissolution ◽  
Plain Water ◽  
Dissolution Profile ◽  
Type Ii ◽  
Dissolution Apparatus ◽  
Modified Media ◽  
Paracetamol Tablet ◽  
Carbonated Drink

Oral route of drug delivery is one of the most preferred route of drug administration. People often consume oral solids, especially OTC drugs, at any time before or after breakfast with water or any other available hot or cold beverages. Crocin is one of the popular OTC brands of paracetamol, which is preferred in large number. Patient consumes this OTC tablet with available beverages which may be hot or cold. However, beverages interact with paracetamol, affecting the release of drug. In view of this, work was focused on study of the effect of various beverages such as coffee, tea, milk, carbonated drink and buttermilk on release of paracetamol (Crocin tablet) tablet using USP type II dissolution apparatus.  Dissolution media used was modified phosphate buffer (pH 5.8) which was further added with beverages and was analyzed by UV spectrophotometrically. Dissolution profile revealed the maximum drug release 97.03 ± 1.29% in plain water was while minimum with tea 23.64 ± 2.00%. In conclusion, beverages consumed while administering with paracetamol tablet affects the release of drug and therefore should be cautiously used or avoided with dosage forms.

scholarly journals Assessment of Dissolution Profile of Aceclofenac Tablets Available in Bangladesh

1970 ◽  
Vol 3 (1) ◽  
pp. 1-3
Author(s):  
Tajnin Ahmed ◽  
Afia Ferdous ◽  
Subrata Kumar Biswas ◽  
Farhana Sharif
Keyword(s):  
Drug Release ◽  
Key Words ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Medium Ph ◽  
Time Period ◽  
Dissolution Apparatus ◽  
Tablet Formulations

The objective of this work is to find out brand-to-brand variation by applying profile comparison approaches to the dissolution data of marketed aceclofenac tablet formulations. Commercially available five brands of aceclofenac tablets were studied in simulated intestinal medium (pH 6.8) for 60 minutes time period using USP reference dissolution apparatus. Four samples complied with the USP in vitro dissolution specifications for drug release (not less than 80% of the labeled amount of Aceclofenac should be dissolved in 60 minutes). One brand (Code: S1) failed to meet the criteria; drug release was 66.85% within the specified time period. Key words: Bangladesh; In vitro dissolution; market preparations; aceclofenac; tablet. DOI: 10.3329/sjps.v3i1.6790S. J. Pharm. Sci. 3(1): 1-3

Formulation and Evaluation of Microbially- triggered tablets of Valdecoxib

2010 ◽  
Vol 2 (1) ◽  
Author(s):  
Surender Verma ◽  
S. Singh ◽  
D. Mishra ◽  
Atul Gupta ◽  
Rakesh Sharma
Keyword(s):  
Phosphate Buffer ◽  
Guar Gum ◽  
Oral Route ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Wet Granulation ◽  
Dissolution Study ◽  
Caecal Content ◽  
Model Drug

The objective of present study was to develop colon targeted drug delivery using bacterially triggered approach through oral route. Valdecoxib (COX-2 inhibitor) was chosen as a model drug in order to target it to colon which may prove useful in inflammatory bowel disease and related disorders. Matrix tablets of Valdecoxib were prepared by wet granulation technique utilizing different ratio of Guar gum and Sodium starch glycholate. The prepared matrix tablets were evaluated for uniformity of weight, uniformity of content, hardness and in vitro dissolution study in simulated gastric and intestinal fluid (Phosphate Buffer pH-1.2, pH-6.8 and pH-7.4), followed by Dissolution study in bio-relevant dissolution media Phosphate Buffer (pH-6.8) containing rat caecal content. The results revealed that the formulated batch had released lesser quantity of drug at pH 1.2 and pH 7.4 in 2 hors whereas in biorelevent dissolution media containing rat caecal content it released significantly higher amount of drug which was also significantly higher than the dissolution media of same pH without caecal content (microflora) and it was concluded that guar gum can be used as a potential carrier for targeting drugs to colon.

PERILAKU DISOLUSI KETOPROFEN DAN INDOMETASIN FARNESIL TERSALUT GEL KITOSAN-GOM GUAR

2012 ◽  
Vol 12 (1) ◽  
Author(s):  
Purwantiningsih Sugita ◽  
Bambang Srijanto ◽  
Budi Arifin ◽  
Fithri Amelia ◽  
Mahdi Mubarok
Keyword(s):  
Room Temperature ◽  
Guar Gum ◽  
Tween 80 ◽  
Chitosan Solution ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Magnetic Stirrer ◽  
Dissolution Behaviour ◽  
Shrimp Shell Waste

Chitosan, a modification of shrimp-shell waste, has been utilized as microcapsule. However, it’s fragile gel property needs to be strengthened by adding glutaraldehyde (glu) and natural hydrocolloid guar gum (gg). This research’s purposes were to study dissolution behaviour of ketoprofen and infar through optimum chitosan-guar gum microcapsule. Into 228.6 mL of 1.75% (w/v) chitosan solution in 1% (v/v) acetic acid,38.1 mL of gg solution was added with concentration variation of 0.35, 0.55, and 0.75% (w/v) for ketoprofen microcapsules and 0.05, 0.19, and 0.33% (w/v) for infar microcapsules, and stirred with magnetic stirrer until homogenous. Afterwards, 7.62mL of glu was added slowly under stirring, with concentrations varied: 3, 3.5, and 4% (v/v) for ketoprofen microcapsules, and 4, 4.5, and 5% (v/v) for infar microcapsules. All mixtures were shaked for 20 minutes for homogenization. All mixtures wereshaked for 20 minutes for homogenization. Into each  microcapsule mixture for ketoprofen, a solution of 2 g of ketoprofen in 250 mL of 96% ethanol was added, whereas solution of 100 mg of in 250 mL of 96% ethanol was added into each microcapsule mixture for infar. Every mixture was then added with 5 mL of 2% Tween-80 and stirred with magnetic stirrer for an hour at room temperature. Everymixture was then added with 5 mL of 2% Tween-80 and stirred with magnetic stirrer for an hour at room temperature. Conversion of suspension into fine powders/granules (microcapsules) was done by using spray dryer. The data of [gg], [glu], and medicine’s content from each microcapsule were treated with Minitab 14 software to obtain optimum [gg] and [glu] for microencapsulation. The dissolution behaviour of optimum ketoprofen and infar microcapsules were investigated. The result of optimization by using Minitab Release 14 software showed that among the microcapsule compositions of [gg] and [glu] were 0.35% (w/v) and 3.75% (v/v), respectively, optimum to coat ketoprofen, whereas [gg] and [glu] of 0.05% (w/v) and4.00% (v/v), respectively, optimum to coat infar, at constant chitosan concentration (1.75% [w/v]). In vitro dissolution profile showed that chitosan-guar gum gel microcapsule was more resistant in intestinal pH condition (rather basic) compared with that in gastric pH (very acidic).

Formulation and Evaluation of Bilayer Sustained Release Tablets of Salbutamol and Theophylline

2009 ◽  
Vol 2 (3) ◽  
pp. 638-646
Author(s):  
R. Nagaraju ◽  
Rajesh Kaza
Keyword(s):  
Ethyl Cellulose ◽  
Xanthan Gum ◽  
Dosage Forms ◽  
In Vitro Dissolution ◽  
Dissolution Studies ◽  
Sustained Release Tablets ◽  
Dissolution Apparatus ◽  
Single Dosage

Salbutamol and theophylline are available in conventional dosage forms, administered four times a day, leading to saw tooth kinetics and resulting in ineffective therapy. The combination of these two drugs in a single dosage form will enhance the patient compliance and prolong bronchodilation. Various polymers, such as hydroxy propyl methylcellulose K4M (HPMC- K4M), hydroxy propyl methylcellulose K100M (HPMC- K100M), xanthan gum, ethyl cellulose and hydroxy propyl methylcellulose phthalate (HPMC-P) were studied. HPMC-P and HPMC- K4M were found to be best in controlling the release. In-vitro dissolution studies were carried out for all the bi-layered tablets developed using USP dissolution apparatus type 2 (paddle). It was found that the tablet FB15-FW3 showed 50% release of salbutamol in first hour and the remaining was released for eight hours. However, theophylline was found to be released as per the USP specifications. The IR spectrum was taken for FB15-FW3 formulation and it revealed that there is no disturbance in the principal peaks of pure drugs salbutamol and theophylline. This further confirms the integrity of pure drugs and no incompatibility of them with excipients. Also, formulation of FB15-FW3 has shown required release pattern and complies with all the evaluated parameters and comparable to the marketed formulation.

Formulation and Evaluation of Benidipine Nanosuspension

2021 ◽  
pp. 4111-4116
Author(s):  
Sejal Patel ◽  
Anita P. Patel
Keyword(s):  
Particle Size ◽  
Water Solubility ◽  
Polymer Concentration ◽  
Oral Route ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Scanning Calorimetry ◽  
23 Factorial Design ◽  
Selection Of

In the interest of administration of dosage form oral route is most desirable and preferred method. After oral administration to get maximum therapeutic effect, major challenge is their water solubility. Water insoluble drug indicate insufficient bioavailability as well dissolution resulting in fluctuating plasma level. Benidipine (BND) is poorly water soluble antihypertensive drug has lower bioavailability. To improve bioavailability of Benidipine HCL, BND nanosuspension was formulated using media milling technique. HPMC E5 was used to stabilize nanosuspension. The effect of different important process parameters e.g. selection of polymer concentration X1(1.25 mg), stirring time X2 (800 rpm), selection of zirconium beads size X3 (0.4mm) were investigated by 23 factorial design to accomplish desired particle size and saturation solubility. The optimized batch had 408 nm particle size Y1, and showed in-vitro dissolution Y2 95±0.26 % in 30 mins and Zeta potential was -19.6. Differential scanning calorimetry (DSC) and FT-IR analysis was done to confirm there was no interaction between drug and polymer.

scholarly journals In Silico Prediction of Plasma Concentrations of Fluconazole Capsules with Different Dissolution Profiles and Bioequivalence Study Using Population Simulation

Pharmaceutics ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 215 ◽  
Author(s):  
Marcelo Dutra Duque ◽  
Daniela Amaral Silva ◽  
Michele Georges Issa ◽  
Valentina Porta ◽  
Raimar Löbenberg ◽  
...  
Keyword(s):  
Reference Product ◽  
Plasma Concentrations ◽  
Drug Dissolution ◽  
In Vitro Dissolution ◽  
Dissolution Behavior ◽  
Dissolution Profile ◽  
Time Data ◽  
Simulation Results ◽  
Population Simulation

A biowaiver is accepted by the Brazilian Health Surveillance Agency (ANVISA) for immediate-release solid oral products containing Biopharmaceutics Classification System (BCS) class I drugs showing rapid drug dissolution. This study aimed to simulate plasma concentrations of fluconazole capsules with different dissolution profiles and run population simulation to evaluate their bioequivalence. The dissolution profiles of two batches of the reference product Zoltec® 150 mg capsules, A1 and A2, and two batches of other products (B1 and B2; C1 and C2), as well as plasma concentration–time data of the reference product from the literature, were used for the simulations. Although products C1 and C2 had drug dissolutions < 85% in 30 min at 0.1 M HCl, simulation results demonstrated that these products would show the same in vivo performance as products A1, A2, B1, and B2. Population simulation results of the ln-transformed 90% confidence interval for the ratio of Cmax and AUC0–t values for all products were within the 80–125% interval, showing to be bioequivalent. Thus, even though the in vitro dissolution behavior of products C1 and C2 was not equivalent to a rapid dissolution profile, the computer simulations proved to be an important tool to show the possibility of bioequivalence for these products.

scholarly journals FORMULATION AND EVALUATION OF SUSTAINED RELEASE MATRIX TABLET OF LORNOXICAM BY DIRECT COMPRESSION METHOD

2021 ◽  
Vol 10 (5) ◽  
pp. 131-136
Author(s):  
Asim pasha ◽  
C N Somashekhar
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Prolonged Release ◽  
Matrix Tablet ◽  
Direct Compression ◽  
Dissolution Profile ◽  
Drug Content

The aim of the present work was to develop sustained release Lornoxicam matrix tablets with polymers like HPMC K15M, Ethyl cellulose, and Crospovidone as carriers in varying quantities. Direct compression was used to make matrix tablets. Various assessment parameters, such as hardness, friability, thickness, percent drug content, weight variation, and so on, were applied to the prepared formulations. In vitro dissolution studies were carried out for 24 hrs. The tablets were subjected to in-vitro drug release in (pH 1.2) for first 2 hrs. Then followed by (pH 6.8) phosphate buffer for next 22 hrs. And the results showed that among the six formulations FL3 showed good dissolution profile to control the drug release respectively. The drug and polymer compatibility were tested using FT-IR spectroscopy, which revealed that the drug was compatible with all polymers. It is also required to design an appropriate prolonged release formulation for Lornoxicam in order to maintain the drug's release. Hence by using the compatible polymers sustained release tablets were formulated and subjected for various types of evaluation parameters like friability, hardness, drug content and dissolution behaviour. Finally, the findings reveal that the prepared sustained release matrix tablets of lornoxicam have improved efficacy and patient compliance.

scholarly journals Enhancement of Solubility and Improvement of Dissolution Rate of Atorvastatin Calcium Prepared as Nanosuspension

2019 ◽  
Vol 28 (2) ◽  
pp. 46-57
Author(s):  
Ahmed H. Ali ◽  
Shaimaa N. Abd-Alhammid
Keyword(s):  
Particle Size ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Precipitation Method ◽  
Size Analysis ◽  
Dissolution Profile ◽  
Disintegration Time ◽  
Atorvastatin Calcium ◽  
Freeze Dried

       Atorvastatin have problem of very slightly aqueous solubility (0.1-1 mg/ml). Nano-suspension is used to enhance it’s of solubility and dissolution profile. The aim of this study is to formulate Atorvastatin as a nano-suspension to enhance its solubility due to increased surface area of exposed for dissolution medium, according to Noyes-Whitney equation.         Thirty one formulae were prepared to evaluate the effect of ; Type of polymer, polymer: drug ratio, speed of homogenization, temperature of preparation and inclusion of co-stabilizer in addition to the primary one; using solvent-anti-solvent precipitation method under high power of ultra-sonication. In this study five types of stabilizers (TPGS, PVP K30, HPMC E5, HPMC E15, and Tween80) were used in three different concentrations 1:1, 1:0.75 and 1:0.5 for preparing of formulations. At the same time, tween80 and sodium lauryl sulphate have been added as a co-stabilizer.          Atorvastatin nano-suspensions were evaluated for particle size, PDI, zeta potential, crystal form and surface morphology. Finally, results of particle size analysis revealed reduced nano-particulate size to 81nm for optimized formula F18 with the enhancement of in-vitro dissolution profile up to 90% compared to 44% percentage cumulative release for the reference Atorvastatin calcium powder in 6.8 phosphate buffer media. Furthermore, saturation solubility of freeze dried Nano suspension showed 3.3, 3.8, and 3.7 folds increments in distilled water, 0.1N Hcl and 6.8 phosphate buffers, respectively. Later, freeze dried powder formulated as hard gelatin capsules and evaluated according to the USP specifications of the drug content and the disintegration time.        As a conclusion; formulation of poorly water soluble Atorvastatin calcium as nano suspension significantly improved the dissolution of the drug and enhances its solubility.

scholarly journals Enrichment of aqueous solubility and dissolution profile of mesalamine: In vitro evaluation of solid dispersion

2021 ◽  
Vol 9 (2) ◽  
pp. 127-135
Author(s):  
Anil Raosaheb Pawar ◽  
Pralhad Vitthalrao Mundhe ◽  
Vinayak Kashinath Deshmukh ◽  
Ramdas Bhanudas Pandhare ◽  
Tanaji Dilip Nandgude
Keyword(s):  
Ulcerative Colitis ◽  
Drug Release ◽  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Aqueous Solubility ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Peg 4000

The aim of the present study was to formulate solid dispersion (SD) of Mesalamine to enrich the aqueous solubility and dissolution rate. Mesalamine is used in the management of acute ulcerative colitis and for the prevention of relapse of active ulcerative colitis. In the present study, Solid dispersion of Mesalamine was prepared by Fusion and Solvent evaporation method with different polymers. SD’s were characterized by % practical yield, drug content, Solubility, FT-IR, PXRD (Powder X- ray diffractometry), SEM (Scanning electron microscopy), in vitro dissolution studies and Stability studies. The percent drug release of prepared solid dispersion of Mesalamine by fusion and solid dispersion method (FM47, FM67, SE47 and SE67) in 1:7 ratio was found 81.36±0.41, 86.29±0.64, 82.45±0.57and 87.25±1.14 respectively. The aqueous solubility and percent drug release of solid dispersion of Mesalamine by both methods was significantly increased. The PXRD demonstrated that there was a significant decrease in crystallinity of pure drug present in the solid dispersions, which resulted in an increased aqueous solubility and dissolution rate of Mesalamine.The significant increase in aqueous solubility and dissolution rate of Mesalamine was observed in solid dispersion as the crystallinity of the drug decreased, absence of aggregation and agglomeration, increased wetability and good dispersibility after addition of PEG 4000 and PEG 6000.

Sign in / Sign up

Export Citation Format

Share Document