scholarly journals Niosomal Encapsulation of Curcumin: Formulation and Characterization

Author(s):  
Deepak Singh ◽  
Prashant Upadhyay

Aim: Because of its many actions, curcumin, a plant-derived polyphenolic substance found naturally in turmeric (Curcuma longa), has been the focus of a significant investigation. The utilization of safe, useful, and highly functional chemicals obtained from natural sources in human nutrition/prevention/therapy needs some modifications to achieve multifunctionality, enhance the bioavailability, and delivery methods, all to enhance their efficacy. Curcumin's limited water solubility, fast metabolism and removal from the body, and hence low bioavailability, are significant obstacles to its use. To address these issues, a variety of new drug delivery systems with multiple routes of administration have evolved. Encapsulating the medication in vesicular structures is one such technique that, if successful in enabling selective absorption, can be predicted to extend the drug's life in systemic circulation and reduce toxicity. As a result, several vesicular drug delivery methods, including liposomes, niosomes, transfersomes, and pharmacosomes, have been developed. Since then, developments in vesicular drug delivery have resulted in the creation of systems that enable drug targeting as well as the prolonged or controlled release of traditional medications. The present study aimed to develop and characterize curcumin-loaded niosomes. Design of Study: In present study 32 factorial method was used to formulate different formulations of niosomes containing curcumin. Place and Duration of Study: Department of Pharmacy, IFTM University Moradabad, From December to May 2021. Methodology: Various niosomal formulations of curcumin were developed by using surfactant and cholesterol by thin-film hydration technique. Total 9 formulations were developed and characterized (32 factorial designs). Results: Formulation N7 was considered as an optimized formulation since formulation F7 has maximum drug entrapment and a prolonged drug release rate. The present study suggests that the concentration of surfactant and cholesterol affects % drug loading efficiency of niosomes. The percentage entrapment efficiency of niosomes increases on the increasing concentration of surfactant (Span 60) and cholesterol but above a certain concentration of cholesterol further increment in cholesterol concentration reduces drug entrapment efficiency of niosomes.

2020 ◽  
Vol 175 ◽  
pp. 07003
Author(s):  
Valeria Shakhova ◽  
Valery Belyaev ◽  
Elena Kastarnova ◽  
Vladimir Orobets ◽  
Elena Grudeva

Targeting is a phenomenon in which the distribution of a drug in the body occurs in such a way that the main part of it interacts with the target tissue at the cellular or subcellular level to achieve the desired pharmacological effect on the selected site without undesirable interactions in other organs. This can be achieved using a drug delivery system such as niosomes, which are non-ionic vesicles of surfactants obtained by hydrating synthetic non-ionic surfactants with the inclusion of cholesterol. They are vestibular systems similar to liposomes that can be used as carriers of amphiphilic or lipophilic drugs. Niosomes are a promising drug delivery tool, and it has been widely evaluated as a possibility of controlled release and targeted delivery of the active substance for the treatment of cancer, autoimmune diseases, viral and other infectious diseases. It can be assumed that encapsulation of the drug in the vesicular system prolongs its presence in the systemic circulation and increases the possibility of penetration into the target tissue, possibly reducing toxicity if selective absorption can be achieved.


2017 ◽  
Vol 5 (04) ◽  
pp. 29-33
Author(s):  
Naresh Kalra ◽  
G. Jeyabalan

Drug delivery systems are defined as formulations aim for transportation of a drug to the desired area of action within the body. The aim of the study was to investigate the feasibility of using Niosomes as a drug delivery system for Cisplatin By entrapment of drug in Niosomes, dose also could be reduced. Niosomes were prepared by Ethanol injection method using cholesterol and Surfactant. Particle size, zeta potential, entrapment efficiency and in vitro drug release studies were performed. The targeted niosome delivery system is composed of drug, surfactant and cholesterol. With regard to the influence of formulation variables on the percent drug loading (PDL), different compositions with varying ratios of surfactant and cholesterol were studied. In –Vitro drug release mechanism was studied for 24 hours.


Author(s):  
J M Shah ◽  
N.H Shah ◽  
Hadiya P D

Pharmaceutical technology has developed various newer modes of novel drug delivery aspects. Modifications in the previously existing drug delivery methods have led to various newly innovated technologies serving as a safe and effective means of improvement over the existing ones. Novasome technology is one of the new innovations of liposomes which have solved many of the problems related to liposomal drug delivery system. It offers a seven bilayer membrane which has the ability to incorporate both water soluble and insoluble drugs. It has an excellent entrapment efficiency which provides better medication. Formulation of novasomes is achieved in a high shear device. Due to its numerous advantages, novasomes have been used extensively in various fields like cosmetics, chemical, personal care, foods, pharmaceuticals and agrochemicals.


Author(s):  
Sunitha M Reddy ◽  
Sravani Baskarla

This article describes current strategies to enhance aqueous solubility and dissolution rate of poor soluble drugs. Most drugs in the market are lipophilic with low or poor water solubility. There are various methods to enhance solubility: co-solvency, particle size reduction, salt formation and Self Nanoemulsifying drug delivery systems, SEDDS is a novel approach to enhance solubility, dissolution rate and bioavailability of drugs. The study involves formulation and evaluation of solid self-Nano emulsifying drug delivery system (S-SNEDDS) to enhance aqueous solubility and dissolution rate. Oral route is the most convenient route for non-invasive administration. S-SNEDDS has more advantages when compared to the liquid self-emulsifying drug delivery system. Excipients were selected depends upon the drug compatibility oils, surfactants and co surfactants were selected to formulate Liquid SNEDDS these formulated liquid self-nano emulsifying drug delivery system converted into solid by the help of porous carriers, Melted binder or with the help of drying process. Conversion process of liquid to solid involves various techniques; they are spray drying; freeze drying and fluid bed coating technique; extrusion, melting granulation technique. Liquid SNEDDS has a high ability to improve dissolution and solubility of drugs but it also has disadvantages like incompatibility, decreased drug loading, shorter shelf life, ease of manufacturing and ability to deliver peptides that are prone to enzymatic hydrolysis.  


Author(s):  
Aiswarya Anilkumar Ajitha ◽  
Sri SivaKumar ◽  
Gayathri Viswanathan ◽  
Sabulal Baby ◽  
Prabath Gopalakrishnan Biju

Background: Over the last few decades, there has been a stupendous change in the area of drug delivery using particulate delivery systems, with increasing focus on nanoparticles in recent times. Nanoparticles helps to improve and alter the pharmacodynamic properties and pharmacokinetics of various types of drug molecules. These features help to protect the drug entity in the systemic circulation, access of the drug to the chosen sites, and to deliver the drug in a controlled and sustained rate at the site of action. Objective: Nanoparticle based targeted delivery of anti-inflammatory drugs/signal modulatory agents to the cytoplasm or nuclei of the targeted cell can significantly enhance the precision and efficacy of intended therapeutic activity. To this end, we report ligand free, enhanced intra-nuclear delivery model of anti-inflammatory therapeutics via PDMS nanoparticles. Method: PDMS nanoparticles were prepared by sacrificial silica template-based approach and details of their characterization for suitability as a nanoparticle-based delivery material is detailed herein. Results: Biological evaluation for compatibility was carried out and the results showed that the PDMS nanoparticle has no toxicity on RAW 264.7 cells in the concentration range of 10, 20, 40, 60, 80, 100 and 120 μg/mL in culture. Biocompatibility and absence of toxicity was determined by morphological examination and cell viability assays. Drug loading and release kinetics were carried out with the anti-inflammatory drug Diclofenac. Conclusion: In this paper we clearly demonstrate the various aspects of nanoparticle articulation, characterization, effect of their characteristics and their applications as a non-toxic drug delivery molecule for its potential applications in therapeutic delivery of drugs for sustained release.


Author(s):  
GEETHA V. S. ◽  
MALARKODI VELRAJ

Objective: To formulate, optimize and evaluate 5-fluorouracil loaded liquorice crude protein nanoparticles for sustained drug delivery using Box-Behnken design. Methods: 5-fluorouracil (5-FU) loaded liquorice crude protein (LCP) nanoparticles were prepared by desolvation method using ethanol-water (1:2 ratio), Tween-80 (2%v/v) as stabilizing agent and gluteraldehyde (8% v/v) as cross linking agent. The optimization of prepared nanoparticles was carried out using Box-Behnken design with 3 factors 2 levels and 3 responses. The independent variables were A)5-FU concentration B)LCP concentration and C) sonication time while the responses were R1) Drug entrapment efficiency R2) Drug loading efficiency and R3) Particle size. The correlation between factors and responses were studied through response surface plots and mathematical equations. The nanoparticles were evaluated for FTIR, physicochemical properties like particle size and zeta potential by Photon correlation spectroscopy (PCS) and surface morphology by TEM. The entrapment efficiency, drug loading efficiency and in vitro drug release studies in PBS pH 7.4 (24 h) were carried out. The observed values were found to be in close agreement with the predicted value obtained from the optimization process. Results: 5-fluorouracil loaded LCP nanoparticles were prepared by desolvation method, the optimization was carried out by Box-Behnken design and the final formulation was evaluated for particle size (301.1 nm), zeta-potential (-25.8mV), PDI(0.226), with entrapment efficiency (64.07%), drug loading efficiency (28.54%), in vitro drug release (65.2% in 24 h) respectively. The formulated nanoparticles show Higuchi model drug release kinetics with sustained drug delivery for 24 h in pH7.4 buffer. Conclusion: The results were proved to be the most valuable for the sustained delivery of 5-Fluorouracil using liquorice crude protein as carrier. 5-FU–LCP nanoparticles were prepared using Tween-80 as stabilizing agent and gluteraldehyde as cross-linking agent to possess ideal sustained drug release characteristics.


2020 ◽  
Vol 10 (3-s) ◽  
pp. 367-370
Author(s):  
Kinjal Patel ◽  
Devanshi Patel

Worldwide, cancer is one of the leading causes of mortality and cancer rates are set to increase at alarming rate globally. There are various types of cancer in which the leading type is the lung cancer.   In recent years lipid-based carriers, such as liposomes, have successfully encapsulated chemotherapeutic agents ameliorating some toxicity issues, while enhancing the overall therapeutic activity in cancer patients. In addition to this, nanomaterials can help to improved half-life in the body, morphology, for increased drug loading and many other ways. The survey discussed in this review will lead the anticancer therapy and cancer management which will provide the platform to the next generation.  Therefore, this critical review includes the therapeutic interventions, liposomes target delivery, active and passive drug loading. Finally, we attempt to summarize the current challenges in nanotherapeutics and provide an outlook on the future of this important field. Keywords: Drug Delivery, Liposomes target Delivery, Nanostructures, Drug loading


Author(s):  
Sanjoy Das ◽  
Malay K. Das

Objective: Site-specific drug delivery into the colonic region is extremely fascinating for local treatment of various colonic diseases like ulcerative colitis, colon cancer but it should be capable of saving the drug from hydrolysis and degradation. The present study reports the application of jackfruit seed starch and its thiol derivative as a drug delivery carrier for the colon. Methods: The starch was extracted from the jackfruit seeds by water extraction method and modified by the esterification reaction with thioglycolic acid. The thiolated starch was characterized for morphology, functional and flow properties. The safety profile of the thiolated starch was confirmed by acute toxicity study in a mice model as per OECD guidelines 423. The microspheres based on thiolated starch were prepared by ionic gelation method incorporating Ibuprofen as a model drug. The prepared microspheres were characterized for particle size, drug entrapment efficiency, drug loading, compatibility study, surface morphology, in vitro drug release and release kinetics. Results: The result attributed that starch was successfully modified by the thiolation with a degree of substitution of 3.30. The size of prepared microspheres ranges from 825.5±4.58 to 857±6.24 µm, the entrapment efficiencies ranges from 69.23±1.19 to 76.15±0.83 % and the drug loading capacity ranges from 17.75±0.30 to 46.05±0.49 %. The FT-IR, DSC and XRD studies confirmed that there is no interaction within drug and excipients. The thiolated starch microspheres show the maximum release of drug at pH 7.4 in the presence of rat caecal content as compared to pH 1.2 and pH 6.8 for up to 24 h and are following first order release kinetics. Conclusion: These results suggest the application of thiolated jackfruit seed starch could be promising as a long-term drug delivery carrier for the colon.


Polymers ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 380 ◽  
Author(s):  
Yang Han ◽  
Na Liang ◽  
Pengfei Yan ◽  
Yoshiaki Kawashima ◽  
Fude Cui ◽  
...  

In this study, a redox-sensitive chitosan derivative with modifications by cholesterol, sulfhydryl, and mPEG (mPEG-CS(SH)-CHO) was successfully synthesized and characterized. Due to its amphiphilicity, the conjugate could spontaneously form micelles in an aqueous environment. The optimized paclitaxel (PTX)-loaded mPEG-CS(SH)-CHO micelles, with a mean diameter of 158 nm, zeta potential of +26.9 mV, drug loading of 11.7%, and entrapment efficiency of 88.3%, were successfully prepared. The results of an XRD study demonstrated that PTX was loaded in the core of the micelles in a non-crystalline state. Inspiringly, the PTX-loaded micelles possessed excellent anticancer effect but low toxicity to the body. It can be concluded that the mPEG-CS(SH)-CHO micellar system is a promising drug delivery carrier for the controlled release of PTX.


2005 ◽  
Vol 04 (05n06) ◽  
pp. 855-861 ◽  
Author(s):  
MARTIN GARNETT

The use of nanosized materials changes the way in which drugs are handled by the body and offers opportunities to improve drug delivery. The physiological mechanisms controlling the distribution of nanosized materials (enhanced permeability and retention effect, cellular uptake pathways and opsonisation/elimination of nanoparticles) are described. Two different nanosized drug delivery systems are considered; drug delivery and DNA delivery. The deficiencies of currently available biodegradable polymers for preparation of drug containing nanoparticles are mainly the amount of drug that can be incorporated and the rapid rate of drug release. The development of new biodegradable polymers which can interact with the drug and so significantly increase drug loading and decrease the rate of drug release are outlined. DNA delivery necessitates overcoming a variety of biological barriers. We are developing polyelectrolyte complexes of DNA with cationic polyamidoamines (PAA) as a delivery system. Complexing PAA with DNA results in good transfection of cells in vitro. However, in vivo, a more complex arrangement of PAA, Polyethylene glycol-PAA copolymers, DNA and the use of ligands will be required. Despite these efforts, further developments will be needed in nanotechnology for both drug and DNA nanoparticle delivery systems to achieve our clinical objectives.


Sign in / Sign up

Export Citation Format

Share Document