IN VITRO DRUG RELEASE STUDY OF CHLORAMPHENICOL IN SITU GEL WITH BASES MIXTURE OF POLOXAMER 407 AND HPMC BY OPTIMIZATION WITH FACTORIAL DESIGN

Objective: The objective of this study was to find the best base mixture composition (poloxamer 407 and HPMC) of chloramphenicol in situ gel formula based on in vitro property (Cumulative amount of drug release). Methods: The in vitro diffusion of chloramphenicol in situ gel study was carried out using franz diffusion cells to know the effect of the Critical Process Parameters (CPPs) as independent variables (poloxamer 407 and hydroxypropyl methylcellulose (HPMC)) on the Critical Quality Attribute (CQA) as dependent variable (cumulative amount of drug release) with 22 factorial design. Results: 22 factorial design of chloramphenicol in situ gel yielded 4 variations of poloxamer 407 and HPMC bases component in %w/v as follows, F1 (5:0.45), F2 (10:0.45) F3 (5:1) and F4 (10:1). The amount of drug release results from in vitro dissolution assay were 30.60% (F1), 45.64% (F2), 58.30% (F3), and 22.50%) (F4). Conclusion: Formula 3 (F3) was considered as the best formula component in terms of in vitro assay of chloramphenicol in situ gel with a desirability value of 0.58.

Assessment of Fluoride Release through Dentin Adhesive in the Alkasite Restorative Material and Giomer

This study evaluated the fluoride release of alkasite restorative material (ARM) and giomer penetrating the dentin adhesive layer. Twenty specimens were prepared for each restorative material, and dentin adhesive with uniform thickness was applied to half of them. The prepared specimens were placed in a polyethylene tube containing 2.0 mL of deionized water and deposited in a 37.0°C water bath for the study duration. The amount of fluoride release was measured on the 1st, 3rd, 7th, 14th, 21st, and 28th days after deposition. The dentin adhesive applied to the ARM and giomer could not completely block the fluoride release; however, it significantly reduced its amount. The cumulative amount of fluoride release of the ARM after 28 days was higher than that of the giomer regardless of the application of dentin adhesive.

Construction of a Nano-Controlled Release Methotrexate Delivery System for the Treatment of Rheumatoid Arthritis by Local Percutaneous Administration

A drug delivery system was specifically designed for the treatment of rheumatoid arthritis (RA) by local percutaneous administration and the nano-controlled release of methotrexate (MTX). The release behavior of MTX from the synthesized MTX-mSiO2@PDA system was investigated in vitro and in vivo. The obtained results show that after 48 h, twice as much MTX (cumulative amount) is released at pH 5.5 than at pH 7.4. This suggests that the MTX-mSiO2@PDA system exhibits a good pH sensitivity. In vitro local percutaneous administration experiments revealed that the cumulative amount of MTX transferred from MTX-mSiO2@PDA to pH 5.0 receptor fluid through the whole skin was approximately three times greater than the amount transferred to pH 7.4 receptor fluid after 24 h. Moreover, in vivo experiments conducted on a complete induced arthritis (CIA) model in DBA/1 mice demonstrated that the thickness of a mouse’s toes decreases to nearly 65% of the initial level after 27 days of local percutaneous MTX-mSiO2@PDA administration. Compared to the mice directly injected with MTX, those administered with MTX-mSiO2@PDA by local percutaneous application exhibit much lower toe thickness deviation, which indicates that the latter group experiences a better cure stability. Overall, these results demonstrate that the local percutaneous administration of MTX delivery systems characterized by nano-controlled release may play an important role in RA therapy.

Impact of Short-term Artificial Low Salinity Stress on the Flavor Quality of Scylla Paramamosain

Scylla paramamosain is a kind of large euryhaline marine crab. As an important physicochemical parameter of seawater, salinity has a great impact on the survival, growth and quality of Scylla paramamosain. This research tested the content of non-volatile flavor substance, lactic acid and taurine on the 0, 1st, 3rd, 7th and 15th day in three salinity gradients (3, 13, 23) with HPLC (High-performance Liquid Chromatography) technology. Results have shown that in low salinity stress, the cumulative amount of free amino acids in muscle of Scylla paramamosain is more than that in hepatopancreas, while the cumulative amount of essential amino acids in hepatopancreas is more than that in muscle. In muscle, contents of three flavor amino acids are ranked as follows: sweet, bitter and delicious amino acid, and in hepatopancreas, it is bitter, sweet and delicious amino acid. The fluctuation rule of free amino acid, essential amino acid and lactic acid in Scylla paramamosain in the low salinity group is similar to that of other salinity control group, while the content of sweet amino acid, bitter amino acid, nucleotide, EUC, taurine is different from that of other salinity control groups.

$14.5-Billion Per Year and Counting: Canadian Gambling Statistics

Ask any gambler how much money they spend on gambling in a typical year and you’ll almost certainly see a quizzical look appear on their face. Individuals are frequently reluctant to disclose such information and those that do typically find it difficult to recall the specifics of their gambling spending. Gamblers who are willing and able to answer might also need some clarification since the question could be referring to either the cumulative amount of dollars gambled or the net dollar figure gambled after accounting for wins and losses[1]. But what if, instead of asking individual gamblers about their spending, one was attempting to determine gambling spending for the entire country of Canada including provinces and territories… are these figures even available? Are provincial and territorial gambling regulators and operators forthcoming with this information? The short answer is that, yes, it is indeed possible to determine a figure for Canada’s net commercial gambling revenue using available data[2]. In this article, I’ll describe my rationale for documenting available Canadian gambling statistics, methods employed, and challenges encountered. A selection of charts is interspersed throughout to illustrate key gambling statistics using examples from the Canadian Gambling Statistics (1970-2020) online database which was created to house these collected statistics and make them publicly accessible. [1] To learn about these intricacies, see Wood & Williams (2007) ‘How Much Money Do You Spend on Gambling?’ The Comparative Validity of Question Wordings Used to Assess Gambling Expenditure and Auer & Griffiths (2017) Self-Reported Losses Versus Actual Losses in Online Gambling: An Empirical Study. [2] Calculate at $14.51-billion in 2019 or about $500 per Canadian adult (18+ years of age) – for details, see Figure 1.

Viroids as a Tool to Study RNA-Directed DNA Methylation in Plants

Viroids are plant pathogenic, circular, non-coding, single-stranded RNAs (ssRNAs). Members of the Pospiviroidae family replicate in the nucleus of plant cells through double-stranded RNA (dsRNA) intermediates, thus triggering the host’s RNA interference (RNAi) machinery. In plants, the two RNAi pillars are Post-Transcriptional Gene Silencing (PTGS) and RNA-directed DNA Methylation (RdDM), and the latter has the potential to trigger Transcriptional Gene Silencing (TGS). Over the last three decades, the employment of viroid-based systems has immensely contributed to our understanding of both of these RNAi facets. In this review, we highlight the role of Pospiviroidae in the discovery of RdDM, expound the gradual elucidation through the years of the diverse array of RdDM’s mechanistic details and propose a revised RdDM model based on the cumulative amount of evidence from viroid and non-viroid systems.

A Gate-to-Gate Life Cycle Assessment for the CO2-EOR Operations at Farnsworth Unit (FWU)

Greenhouse gas (GHG) emissions related to the Farnsworth Unit’s (FWU) carbon dioxide enhanced oil recovery (CO2-EOR) operations were accounted for through a gate-to-gate life cycle assessment (LCA) for a period of about 10 years, since start of injection to 2020, and predictions of 18 additional years of the CO2-EOR operation were made. The CO2 source for the FWU project has been 100% anthropogenically derived from the exhaust of an ethanol plant and a fertilizer plant. A cumulative amount of 5.25 × 106 tonnes of oil has been recovered through the injection of 1.64 × 106 tonnes of purchased CO2, of which 92% was stored during the 10-year period. An LCA analysis conducted on the various unit emissions of the FWU process yielded a net negative (positive storage) of 1.31 × 106 tonnes of CO2 equivalent, representing 79% of purchased CO2. An optimized 18-year forecasted analysis estimated 86% storage of the forecasted 3.21 × 106 tonnes of purchased CO2 with an equivalent 2.90 × 106 tonnes of crude oil produced by 2038. Major contributors to emissions were flaring/venting and energy usage for equipment. Improvements on the energy efficiency of equipment would reduce emissions further but this could be challenging. Improvement of injection capacity and elimination of venting/flaring or fugitive gas are methods more likely to be utilized for reducing net emissions and are the cases used for the optimized scenario in this work. This LCA illustrated the potential for the CO2-EOR operations in the FWU to store more CO2 with minimal emissions.

Specific and Cumulative Exhaust Gas Emissions in Micro-Scale Generators Fueled by Syngas from Biomass Gasification

Climate change, environmental degradation, and biodiversity loss are prompting production systems to shift from a fossil-based economy to a circular bio-based one. In this context, biomass gasification is a promising alternative to fossil fuels that can contribute to power generation in rural communities and remote areas as well as provide a sustainable source of energy for developed countries. In this work, exhaust gas emissions (CO, NOx, and SO2) of two syngas-fueled micro-scale generators were measured. The first system is a commercial biomass gasifier genset, whereas the second is composed of a laboratory-scale gasifier prototype and a portable petrol generator. For this second facility, emissions were measured both running on gasoline and on syngas. The comparison was performed both on the pollutant concentration and on their cumulative amount. This comparison was made possible by calculating the exhaust gas flow by knowing the combustion stoichiometry and fuel consumption. The results showed a much lower pollutant concentration running on syngas compared to gasoline. In particular, considering the best configurations, every cubic meter of exhaust gas released running on syngas contains about 20 times less CO and almost one-third less NOx compared to gasoline. Moreover, the cumulative amount of emissions released was also considerably lower due to the lower exhaust gas flow (about 25%) released running on syngas.

Reproducing country-wide COVID-19 dynamics can require the usage of a set of SIR systems

This work shows that simple compartmental epidemiological models may not reproduce actually reported country-wide statistics since the latter reflects the cumulative amount of infected persons, which in fact is a sum of outbreaks within different patched. It the same time, the multilogistic decomposition of such epidemiological curves reveals components, which are quite close to the solutions of the SIR model in logistic approximations characterised by different sets of parameters including time shifts. This line of reasoning is confirmed by processing data for Spain and Russia in details and, additionally, is illustrated for several other countries.

Carbon dot-assisted luminescence of singlet oxygen: the generation dynamics but not the cumulative amount of singlet oxygen is responsible for the photodynamic therapy efficacy

The rapid generation dynamics of 1O2 rather than its cumulative amount is responsible for better treatment efficacy in PDT.