Effect of Potassium Alum Salt Particles on the Activation Energy of Poly(ethylene oxide) Doped with Conductive Carbon Black (CB) Nanoparticles

The electrical properties of conductive carbon black (CB) nanoparticles (0.1wt percent) doped thin films made of poly(ethylene oxide) (PEO) filled with varying amounts of the electrolyte potassium alum salt and doped with conductive carbon black (CB) nanoparticles (0.1wt percent) have been investigated. The dependence of the activation energy of the composites on frequency, temperature, and filler content was studied using the AC impedance technique. The current research looked at how activation energy changed with frequency (200-1000 kHz) and temperature (30-55oC) for composites with varied potassium alum salt concentrations: 0, 2, 4, 8, 12, and 16 wt. percent. The activation energy (Ea) values measured exhibited frequency, temperature, and filler content relationships. According to polarization processes, the activation energy of the produced sheets decreases with the potassium alum salt content in the composite and decreases with the temperature. With increasing frequency, the activation energy of the produced thin films decreases.

Experimental Characterization and Modeling Multifunctional Properties of Epoxy/Graphene Oxide Nanocomposites

Thermomechanical modeling of epoxy/graphene oxide under quasi-static and dynamic loading requires thermo-mechanical properties such as Young’s modulus, Poisson’s ratio, thermal conductivity, and frequency-temperature dependent viscoelastic properties. In this study, the effects of different graphene oxide (GO) concentrations (0.05, 0.1, and 0.2 wt%) within an epoxy matrix on several mechanical and thermal properties were investigated. The distribution of GO fillers in the epoxy was investigated using transmission electron microscopy (TEM). The digital image correlation (DIC) technique was employed during the tensile testing to determine Young’s modulus and Poisson’s ratio. Analytical models were used to predict Young’s modulus and thermal conductivity, with an error of less than 13% and 9%, respectively. Frequency–temperature dependent phenomenological models were proposed to predict the storage moduli and loss tangent, with a reasonable agreement with experimental data. A relatively high storage modulus, heat-resistance index (THRI), and thermal conductivity were observed in 0.2 wt% nanocomposite samples compared with pure epoxy and other lower concentration GO nanocomposites. A high THRI and derivative of thermogravimetric analysis peak temperatures (Tm1 and Tm2) were exhibited by adding nano-fillers in the epoxy, which confirms higher thermal stability of nanocomposites than that of pristine epoxy.

Supercapacitance and superinductance of TiN and NbTiN films in the vicinity of superconductor-to-insulator transition

We investigate the low-temperature complex impedance of disordered insulating thin TiN and NbTiN films in the frequency region 400 Hz–1 MHz in close proximity to the superconductor–insulator transition (SIT). The frequency, temperature, and magnetic field dependencies of the real and imaginary parts of the impedance indicate that in full accord with the theoretical predictions and earlier observations, the films acquire self-induced electronic granularity and become effectively random arrays of superconducting granules coupled via Josephson links. Accordingly, the inductive component of the response is due to superconducting droplets, while the capacitive component results from the effective Josephson junctions capacitances. The impedance crosses over from capacitive to inductive behavior as films go across the transition.

Investigation of frequency dependent mechanical properties of porous materials using dynamic mechanical analyzer and frequency-temperature superposition theory

In acoustic design of engineering applications - such as in the acoustic analysis of passenger vehicles - poroelastic materials are of great importance. One of the most influencing properties in determining their noise-reduction potential is the storage modulus. The purpose of this study is to examine the frequency dependence of storage modulus of selected porous acoustic materials at least up to 1000 Hz. This is executed by using the combined use of dynamic mechanical analyzer and frequency-temperature superposition theory. All other methods for measuring the storage modulus fall short in determining frequency-dependence above 100 Hz: quasi-static mechanical analyzer is mostly used for determining an averaged constant value deduced from low-frequency measurements, while the usage of an electromagnetic shaker capable for high-frequency excitation may include effects of fluid motion inside the pores, thus significantly modifying the results. Frequency-temperature superposition enables to determine the storage modulus values in a wide frequency range, based on low-frequency measurements, where fluid-structure interaction is negligible. It was found that the modulus varied significantly up to and beyond 1000 Hz, and thus, acoustical characterization of these materials can be significantly improved using the proposed method. The work concludes with recommendations to improve the accuracy of the results.

Modeling and Measurements of Properties of Coupled Inductors

This paper proposes a model of a coupled inductor which takes into account the influence of frequency, temperature, and a constant component, IDC, of currents in the windings on the parameters of the considered element. A description of the model and methods of measuring parameters of the inductor using an impedance analyzer and a chamber for thermal measurements is given. The obtained results of measurements are compared with the results of calculations proving a satisfactory match.