Supramolecular Metal‐Modified Nanocontainers Based on Amphiphilic and Hybrid Matrix: Self‐Assembling Behavior and Practical Applications

2022 ◽  
pp. 223-248
Author(s):  
Elena P. Zhiltsova ◽  
Marina R. Ibatullina ◽  
Ruslan R. Kashapov ◽  
Nadezda E. Kashapova ◽  
Albina Y. Ziganshina ◽  
...  
Keyword(s):  
Practical Applications ◽  
Hybrid Matrix ◽  
Self Assembling

Formation of Supramolecular Assemblies by Modulating Self-Assembling Properties of Diacetylenic Phosphocholines

2001 ◽  
Vol 707 ◽  
Author(s):  
Alok Singh ◽  
Eva M. Wong ◽  
Mark S. Spector ◽  
Joel M. Schnur
Keyword(s):  
Lipid Concentration ◽  
Morphological Transformation ◽  
Lipid Mixture ◽  
Practical Applications ◽  
Spectral Signatures ◽  
Self Assembling ◽  
Effects Of Temperature ◽  
Different Diameters ◽  
Circular Dichroic ◽  
Thermal Stability Of

ABSTRACTDiacetylenic phospholipid dispersions in water produce tubules (500 nm diameter) and helices from their initial vesicular morphology as a function of temperature and concentration. A binary mixture consisting of diacetylenic phospholipid, 1,2 bis (tricosa-10, 12-diynoyl)-sn-glycero-3-phosphocholine and a short chain phospholipid, 1,2-dinonanoyl –sn-glycero-3-phosphocholine was studied to explore the morphological transformation of lipids into tubules to develop an approach to control and produce tubules of different diameters. Circular dichroic spectra not only indicated the chiral nature of these tubules, but also provided distinct spectral signatures differentiating micro- and nanotubules. The effects of temperature and lipid concentration on the formation and stability of tubules were also explored. An equimolar lipid mixture provided structures with uniform morphology, which were stable for several hours up to 36°C. The thermal stability of nanotubules makes them an attractive candidate for many practical applications including controlled release technology.

Formation of Supramolecular Assemblies by Modulating Self-Assembling Properties of Diacetylenic Phosphocholines

2001 ◽  
Vol 711 ◽  
Author(s):  
Alok Singh ◽  
Eva M. Wong ◽  
Mark S. Spector ◽  
Joel M. Schnur
Keyword(s):  
Lipid Concentration ◽  
Morphological Transformation ◽  
Lipid Mixture ◽  
Practical Applications ◽  
Spectral Signatures ◽  
Self Assembling ◽  
Effects Of Temperature ◽  
Different Diameters ◽  
Circular Dichroic ◽  
Thermal Stability Of

ABSTRACTDiacetylenic phospholipid dispersions in water produce tubules (500 nm diameter) and helices from their initial vesicular morphology as a function of temperature and concentration. A binary mixture consisting of diacetylenic phospholipid, 1, 2 bis (tricosa-10, 12-diynoyl)-sn-glycero-3-phosphocholine and a short chain phospholipid, 1, 2-dinonanoyl -sn-glycero-3-phosphocholine was studied to explore the morphological transformation of lipids into tubules to develop an approach to control and produce tubules of different diameters. Circular dichroic spectra not only indicated the chiral nature of these tubules, but also provided distinct spectral signatures differentiating micro- and nanotubules. The effects of temperature and lipid concentration on the formation and stability of tubules were also explored. An equimolar lipid mixture provided structures with uniform morphology, which were stable for several hours up to 36 °C. The thermal stability of nanotubules makes them an attractive candidate for many practical applications including controlled release technology.

scholarly journals Peroxidase-Like Metal-Based Nanozymes: Synthesis, Catalytic Properties, and Analytical Application

2021 ◽  
Vol 11 (2) ◽  
pp. 777
Author(s):  
Olha Demkiv ◽  
Nataliya Stasyuk ◽  
Roman Serkiz ◽  
Galina Gayda ◽  
Marina Nisnevitch ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Noble Metals ◽  
Catalytic Properties ◽  
High Surface ◽  
High Surface Area ◽  
High Sensitivity ◽  
Analytical Application ◽  
Practical Applications ◽  
Self Assembling ◽  
H2o2 Determination

Nanozymes (NZs) are nanostructured artificial enzymes that mimic catalytic properties of natural enzymes. The NZs have essential advantages over natural enzymes, namely low preparation costs, stability, high surface area, self-assembling capability, size and composition-dependent activities, broad possibility for modification, and biocompatibility. NZs have wide potential practical applications as catalysts in biosensorics, fuel-cell technology, environmental biotechnology, and medicine. Most known NZs are mimetics of oxidoreductases or hydrolases. The present work aimed to obtain effective artificial peroxidase (PO)-like NZs (nanoPOs), to characterize them, and to estimate the prospects of their analytical application. NanoPOs were synthesized using a number of nanoparticles (NPs) of transition and noble metals and were screened for their catalytic activity in solution and on electrodes. The most effective nanoPOs were chosen as NZs and characterized by their catalytic activity. Kinetic parameters, size, and structure of the best nanoPOs (Cu/CeS) were determined. Cu/CeS-based sensor for H2O2 determination showed high sensitivity (1890 A·M−1·m−2) and broad linear range (1.5–20,000 µM). The possibility to apply Cu/CeS-NZ as a selective layer in an amperometric sensor for hydrogen-peroxide analysis of commercial disinfectant samples was demonstrated.

Ion Beam Induced Interfacial Reactions in Molybdenum Thin Films on Silicon

1981 ◽  
Vol 39 ◽  
pp. 162-163
Author(s):  
L. J. Chen ◽  
L. S. Hung ◽  
J. W. Mayer
Keyword(s):  
Ion Beam ◽  
Chemical Vapor ◽  
Interfacial Reactions ◽  
Practical Applications ◽  
Microelectronic Devices ◽  
Recent Emergence ◽  
Chemical Vapor Deposited ◽  
Atomic Mixing ◽  
Silicon Interface ◽  
Kinetics Of

When an energetic ion penetrates through an interface between a thin film (of species A) and a substrate (of species B), ion induced atomic mixing may result in an intermixed region (which contains A and B) near the interface. Most ion beam mixing experiments have been directed toward metal-silicon systems, silicide phases are generally obtained, and they are the same as those formed by thermal treatment.Recent emergence of silicide compound as contact material in silicon microelectronic devices is mainly due to the superiority of the silicide-silicon interface in terms of uniformity and thermal stability. It is of great interest to understand the kinetics of the interfacial reactions to provide insights into the nature of ion beam-solid interactions as well as to explore its practical applications in device technology.About 500 Å thick molybdenum was chemical vapor deposited in hydrogen ambient on (001) n-type silicon wafer with substrate temperature maintained at 650-700°C. Samples were supplied by D. M. Brown of General Electric Research & Development Laboratory, Schenectady, NY.

1250-kilovolt scanning transmission electron microscope

1984 ◽  
Vol 42 ◽  
pp. 624-625
Author(s):  
T. Imura ◽  
S. Maruse ◽  
K. Mihama ◽  
M. Iseki ◽  
M. Hibino ◽  
...  
Keyword(s):  
High Voltage ◽  
Electron Probe ◽  
Scanning Transmission Electron Microscope ◽  
Pressure Vessels ◽  
Practical Applications ◽  
Voltage Generator ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
New Applications ◽  
High Voltage Generator

Ultra high voltage STEM has many inherent technical advantages over CTEM. These advantages include better signal detectability and signal processing capability. It is hoped that it will explore some new applications which were previously not possible. Conventional STEM (including CTEM with STEM attachment), however, has been unable to provide these inherent advantages due to insufficient performance and engineering problems. Recently we have developed a new 1250 kV STEM and completed installation at Nagoya University in Japan. It has been designed to break through conventional engineering limitations and bring about theoretical advantage in practical applications.In the design of this instrument, we exercised maximum care in providing a stable electron probe. A high voltage generator and an accelerator are housed in two separate pressure vessels and they are connected with a high voltage resistor cable.(Fig. 1) This design minimized induction generated from the high voltage generator, which is a high frequency Cockcroft-Walton type, being transmitted to the electron probe.

Characterization of intergranular cuprous oxide in polycrystalline YBa2Cu3O7-x

1988 ◽  
Vol 46 ◽  
pp. 880-881
Author(s):  
Bradley L. Thiel ◽  
Chan Han R. P. ◽  
Kurosky L. C. Hutter ◽  
I. A. Aksay ◽  
Mehmet Sarikaya
Keyword(s):  
Grain Boundary ◽  
Cuprous Oxide ◽  
Room Temperature ◽  
Boundary Phase ◽  
Spectroscopic Techniques ◽  
Transition Width ◽  
Practical Applications ◽  
Thin Foils ◽  
Superconducting Oxides

The identification of extraneous phases is important in understanding of high Tc superconducting oxides. The spectroscopic techniques commonly used in determining the origin of superconductivity (such as RAMAN, XPS, AES, and EXAFS) are surface-sensitive. Hence a grain boundary phase several nanometers thick could produce irrelevant spectroscopic results and cause erroneous conclusions. The intergranular phases present a major technological consideration for practical applications. In this communication we report the identification of a Cu2O grain boundary phase which forms during the sintering of YBa2Cu3O7-x (1:2:3 compound).Samples are prepared using a mixture of Y2O3. CuO, and BaO2 powders dispersed in ethanol for complete mixing. The pellets pressed at 20,000 psi are heated to 950°C at a rate of 5°C per min, held for 1 hr, and cooled at 1°C per min to room temperature. The samples show a Tc of 91K with a transition width of 2K. In order to prevent damage, a low temperature stage is used in milling to prepare thin foils which are then observed, using a liquid nitrogen holder, in a Philips 430T at 300 kV.

Resolution and measurement in the scanning electron microscope

1987 ◽  
Vol 45 ◽  
pp. 534-537 ◽  
Author(s):  
Michael T. Postek
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Engineering Design ◽  
Resolving Power ◽  
Practical Applications ◽  
Instrument Resolution ◽  
Accurate Definition ◽  
Definition Of ◽  
Scanning Electron ◽  
Better Than

The term ultimate resolution or resolving power is the very best performance that can be obtained from a scanning electron microscope (SEM) given the optimum instrumental conditions and sample. However, as it relates to SEM users, the conventional definitions of this figure are ambiguous. The numbers quoted for the resolution of an instrument are not only theoretically derived, but are also verified through the direct measurement of images on micrographs. However, the samples commonly used for this purpose are specifically optimized for the measurement of instrument resolution and are most often not typical of the sample used in practical applications.SEM RESOLUTION. Some instruments resolve better than others either due to engineering design or other reasons. There is no definitively accurate definition of how to quantify instrument resolution and its measurement in the SEM.

In situ TEM Studies of agglomeration of sub-nanometer Ru layers in Ru/C multilayers

1992 ◽  
Vol 50 (1) ◽  
pp. 256-257
Author(s):  
Tai D. Nguyen ◽  
Ronald Gronsky ◽  
Jeffrey B. Kortright
Keyword(s):  
Layered Structure ◽  
Driving Force ◽  
High Energy ◽  
Superior Performance ◽  
In Situ Tem ◽  
Rayleigh Instability ◽  
Practical Applications ◽  
Transmission Electron ◽  
Diffraction Patterns

Nanometer period Ru/C multilayers are one of the prime candidates for normal incident reflecting mirrors at wavelengths < 10 nm. Superior performance, which requires uniform layers and smooth interfaces, and high stability of the layered structure under thermal loadings are some of the demands in practical applications. Previous studies however show that the Ru layers in the 2 nm period Ru/C multilayer agglomerate upon moderate annealing, and the layered structure is no longer retained. This agglomeration and crystallization of the Ru layers upon annealing to form almost spherical crystallites is a result of the reduction of surface or interfacial energy from die amorphous high energy non-equilibrium state of the as-prepared sample dirough diffusive arrangements of the atoms. Proposed models for mechanism of thin film agglomeration include one analogous to Rayleigh instability, and grain boundary grooving in polycrystalline films. These models however are not necessarily appropriate to explain for the agglomeration in the sub-nanometer amorphous Ru layers in Ru/C multilayers. The Ru-C phase diagram shows a wide miscible gap, which indicates the preference of phase separation between these two materials and provides an additional driving force for agglomeration. In this paper, we study the evolution of the microstructures and layered structure via in-situ Transmission Electron Microscopy (TEM), and attempt to determine the order of occurence of agglomeration and crystallization in the Ru layers by observing the diffraction patterns.

A New Detector System For The HB5 Stem Instrument

1985 ◽  
Vol 43 ◽  
pp. 134-135
Author(s):  
J.M. Cowley
Keyword(s):  
Dark Field ◽  
Detector System ◽  
Electron Holography ◽  
Small Specimen ◽  
Bright Field ◽  
Multiple Images ◽  
Practical Applications ◽  
Wide Range ◽  
Diffraction Patterns ◽  
Operational Modes

The HB5 STEM instrument at ASU has been modified previously to include an efficient two-dimensional detector incorporating an optical analyser device and also a digital system for the recording of multiple images. The detector system was built to explore a wide range of possibilities including in-line electron holography, the observation and recording of diffraction patterns from very small specimen regions (having diameters as small as 3Å) and the formation of both bright field and dark field images by detection of various portions of the diffraction pattern. Experience in the use of this system has shown that sane of its capabilities are unique and valuable. For other purposes it appears that, while the principles of the operational modes may be verified, the practical applications are limited by the details of the initial design.

Torus Circumference and Thickness Parameters From a Linear DNA Size Series Suggest How Toruses Self-Assemble

1985 ◽  
Vol 43 ◽  
pp. 522-523
Author(s):  
George C. Ruben ◽  
Kenneth A. Marx
Keyword(s):  
Tertiary Structure ◽  
Dna Complexes ◽  
Tertiary Structures ◽  
Self Assembling ◽  
Double Stranded Dna ◽  
Calf Thymus ◽  
Dna Organization ◽  
Condensed Dna ◽  
Dna Size

Certain double stranded DNA bacteriophage and viruses are thought to have their DNA organized into large torus shaped structures. Morphologically, these poorly understood biological DNA tertiary structures resemble spermidine-condensed DNA complexes formed in vitro in the total absence of other macromolecules normally synthesized by the pathogens for the purpose of their own DNA packaging. Therefore, we have studied the tertiary structure of these self-assembling torus shaped spermidine- DNA complexes in a series of reports. Using freeze-etch, low Pt-C metal (10-15Å) replicas, we have visualized the microscopic DNA organization of both calf Thymus( CT) and linear 0X-174 RFII DNA toruses. In these structures DNA is circumferentially wound, continuously, around the torus into a semi-crystalline, hexagonal packed array of parallel DNA helix sections.

Sign in / Sign up

Export Citation Format

Share Document