Core/Shell PBA/PMMA-PGMA Nanoparticles to Enhance the Impact Resistance of UV-Cured Epoxy Systems

2012 ◽  
Vol 298 (1) ◽  
pp. 106-112 ◽  
Author(s):  
Mohamed Naguib ◽  
Sabrina Grassini ◽  
Marco Sangermano
Keyword(s):  
Impact Resistance ◽  
Core Shell ◽  
The Impact ◽  
Epoxy Systems

scholarly journals Resistance to Cleavage of Core–Shell Rubber/Epoxy Composite Foam Adhesive under Impact Wedge–Peel Condition for Automobile Structural Adhesive

Polymers ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 152 ◽  
Author(s):  
Jong-Ho Back ◽  
Dooyoung Baek ◽  
Jae-Ho Shin ◽  
Seong-Wook Jang ◽  
Hyun-Joong Kim ◽  
...  
Keyword(s):  
Pore Size ◽  
Epoxy Composite ◽  
Impact Resistance ◽  
Expansion Ratio ◽  
Core Shell ◽  
Scanning Calorimetry ◽  
Composite Foam ◽  
Foaming Agent ◽  
Epoxy Foam ◽  
The Impact

Epoxy foam adhesives are widely used for weight reduction, watertight property, and mechanical reinforcement effects. However, epoxy foam adhesives have poor impact resistance at higher expansion ratios. Hence, we prepared an epoxy composite foam adhesive with core–shell rubber (CSR) particles to improve the impact resistance and applied it to automotive structural adhesives. The curing behavior and pore structure were characterized by differential scanning calorimetry (DSC) and X-ray computed tomography (CT), respectively, and impact wedge–peel tests were conducted to quantitatively evaluate the resistance to cleavage of the CSR/epoxy composite foam adhesives under impact. At 5 and 10 phr CSR contents, the pore size and expansion ratio increased sufficiently due to the decrease in curing rate. However, at 20 phr CSR content, the pore size decreased, which might be due to the steric hindrance effect of the CSR particles. Notably, at 0 and 0.1 phr foaming agent contents, the resistance to cleavage of the adhesives under the impact wedge–peel condition significantly improved with increasing CSR content. Thus, the CSR/epoxy composite foam adhesive containing 0.1 phr foaming agent and 20 phr CSR particles showed high impact resistance (EC = 34,000 mJ/cm2) and sufficient expansion ratio (~148%).

Influence of core-Shell structured particles on the impact resistance of poly(vinyl chloride)

2003 ◽  
Vol 14 (3-5) ◽  
pp. 232-238 ◽  
Author(s):  
Tian-Ying Guo ◽  
Guang-Liang Tang ◽  
Guang-Jie Hao ◽  
Shu-Fang Wang ◽  
Moud-Dao Song ◽  
...  
Keyword(s):  
Vinyl Chloride ◽  
Impact Resistance ◽  
Core Shell ◽  
Poly Vinyl Chloride ◽  
The Impact

scholarly journals Effect of Microcapsules of a Waterborne Core Material on the Properties of a Waterborne Primer Coating on a Wooden Surface

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 657 ◽  
Author(s):  
Xiaoxing Yan ◽  
Wenwen Peng
Keyword(s):  
Mass Fraction ◽  
Impact Resistance ◽  
Chromatic Aberration ◽  
Core Material ◽  
Core Shell ◽  
The Core ◽  
Mass Fractions ◽  
Wooden Surface ◽  
The Impact ◽  
Wooden Products

Microcapsules of a waterborne core material were prepared using a waterborne primer. The microcapsules of the waterborne core material were added to the waterborne primer to explore the effects of different core–shell ratios and mass fractions of the microcapsules on the property of the waterborne primer coating on the wooden surface. The results show that as the mass fraction of the microcapsules increased, the chromatic aberration increased by degrees, the glossiness decreased gradually, and the hardness increased by degrees, whilst—except for the coating with 0.50:1 microcapsules—the adhesion decreased gradually. When the mass fraction of the microcapsules increased, the impact resistance increased first and decreased later, or remained unchanged after reaching a certain value. When the mass fraction of the microcapsules increased, the elongation at the break increased first and decreased later. When the core–shell ratio was small and the mass fraction was between 5.0% and 15.0%, the coating had better liquid resistance. When the core–shell ratio was 0.67:1 and the mass fraction was 10.0%, the overall property of the coating on the Basswood was the best. The technology of microencapsulation provides a technical reference for the waterborne primer with self-repair qualities on the surface of wooden products.

scholarly journals Effect of Microcapsule Concentration with Different Core-Shell Ratios on Waterborne Topcoat Film Properties for Tilia europaea

Coatings ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1013
Author(s):  
Xiaoxing Yan ◽  
Wenting Zhao ◽  
Lin Wang ◽  
Xingyu Qian
Keyword(s):  
Urea Formaldehyde ◽  
Paint Film ◽  
Impact Resistance ◽  
Great Influence ◽  
Acrylic Resin ◽  
Color Difference ◽  
Core Shell ◽  
Self Healing ◽  
The Core ◽  
The Impact

The effects of the core-shell ratio and concentration of urea formaldehyde (UF) resin-coated waterborne acrylic resin microcapsules on the optical properties, mechanical properties and liquid resistance of waterborne topcoat coatings on the surface of Tilia europaea were investigated. With the increase of microcapsule concentration, the color difference and hardness of the paint film gradually increased, the gloss and adhesion of the paint film gradually decreased, and the impact resistance and elongation at break of the paint film increased first and then decreased. With the increase of the core-shell ratio, the hardness and impact resistance of the paint film increased first and then decreased, and the adhesion of the paint film decreased gradually. Red ink had a great influence on the liquid resistance of paint film. When the core-shell ratio of UF-coated waterborne acrylic resin microcapsule was 0.58:1 and the microcapsule concentration was 10.0%, the comprehensive performance of paint film on Tilia europaea was better. The prepared self-healing microcapsules applied to the waterborne coatings committed to prolonging the service life of the paint film.

Influence of a core/shell rubber phase on the morphology and the impact resistance of a PC/SAN blend (75/25)

1994 ◽  
Vol 34 (8) ◽  
pp. 613-624 ◽  
Author(s):  
D. Debier ◽  
J. Devaux ◽  
R. Legras ◽  
D. Leblanc
Keyword(s):  
Impact Resistance ◽  
Core Shell ◽  
Rubber Phase ◽  
The Impact

Effect of combined drink cans and steel fibers on the impact resistance and mechanical properties of concrete

2020 ◽  
Vol 14 (2) ◽  
pp. 6734-6742
Author(s):  
A. Syamsir ◽  
S. M. Mubin ◽  
N. M. Nor ◽  
V. Anggraini ◽  
S. Nagappan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Impact Resistance ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Indirect Tensile ◽  
The Impact

This study investigated the combine effect of 0.2 % drink cans and steel fibers with volume fractions of 0%, 0.5%, 1%, 1.5%, 2%, 2.5% and 3% to the mechanical properties and impact resistance of concrete. Hooked-end steel fiber with 30 mm and 0.75 mm length and diameter, respectively was selected for this study.  The drinks cans fiber were twisted manually in order to increase friction between fiber and concrete. The results of the experiment showed that the combination of steel fibers and drink cans fibers improved the strength performance of concrete, especially the compressive strength, flexural strength and indirect tensile strength. The results of the experiment showed that the combination of steel fibers and drink cans fibers improved the compressive strength, flexural strength and indirect tensile strength by 2.3, 7, and 2 times as compare to batch 1, respectively. Moreover, the impact resistance of fiber reinforced concrete has increase by 7 times as compared to non-fiber concretes. Moreover, the impact resistance of fiber reinforced concrete consistently gave better results as compared to non-fiber concretes. The fiber reinforced concrete turned more ductile as the dosage of fibers was increased and ductility started to decrease slightly after optimum fiber dosage was reached. It was found that concrete with combination of 2% steel and 0.2% drink cans fibers showed the highest compressive, split tensile, flexural as well as impact strength.    

scholarly journals Effect of SWCNT-Tuball Paper on the Lightning Strike Protection of CFRPs and Their Selected Mechanical Properties

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3140
Author(s):  
Kamil Dydek ◽  
Anna Boczkowska ◽  
Rafał Kozera ◽  
Paweł Durałek ◽  
Łukasz Sarniak ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Copper Foil ◽  
Impact Resistance ◽  
Mechanical Analysis ◽  
Lightning Strike ◽  
Single Wall Carbon Nanotubes ◽  
Carbon Fibre Reinforced Polymer ◽  
The Impact

The main aim of this work was the investigation of the possibility of replacing the heavy metallic meshes applied onto the composite structure in airplanes for lightning strike protection with a thin film of Tuball single-wall carbon nanotubes in the form of ultra-light, conductive paper. The Tuball paper studied contained 75 wt% or 90 wt% of carbon nanotubes and was applied on the top of carbon fibre reinforced polymer before fabrication of flat panels. First, the electrical conductivity, impact resistance and thermo-mechanical properties of modified laminates were measured and compared with the reference values. Then, flat panels with selected Tuball paper, expanded copper foil and reference panels were fabricated for lightning strike tests. The effectiveness of lightning strike protection was evaluated by using the ultrasonic phased-array technique. It was found that the introduction of Tuball paper on the laminates surface improved both the surface and the volume electrical conductivity by 8800% and 300%, respectively. The impact resistance was tested in two directions, perpendicular and parallel to the carbon fibres, and the values increased by 9.8% and 44%, respectively. The dynamic thermo-mechanical analysis showed higher stiffness and a slight increase in glass transition temperature of the modified laminates. Ultrasonic investigation after lightning strike tests showed that the effectiveness of Tuball paper is comparable to expanded copper foil.

scholarly journals Towards Sustainable Concrete Composites through Waste Valorisation of Plastic Food Trays as Low-Cost Fibrous Materials

2021 ◽  
Vol 13 (4) ◽  
pp. 2073 ◽  
Author(s):  
Hossein Mohammadhosseini ◽  
Rayed Alyousef ◽  
Mahmood Md. Tahir
Keyword(s):  
Compressive Strength ◽  
Low Cost ◽  
Impact Resistance ◽  
Food Tray ◽  
World Population ◽  
Fibrous Materials ◽  
Palm Oil Fuel Ash ◽  
Waste Plastic ◽  
Compressive Strength Of Concrete ◽  
The Impact

Recycling of waste plastics is an essential phase towards cleaner production and circular economy. Plastics in different forms, which are non-biodegradable polymers, have become an indispensable ingredient of human life. The rapid growth of the world population has led to increased demand for commodity plastics such as food packaging. Therefore, to avert environment pollution with plastic wastes, sufficient management to recycle this waste is vital. In this study, experimental investigations and statistical analysis were conducted to assess the feasibility of polypropylene type of waste plastic food tray (WPFT) as fibrous materials on the mechanical and impact resistance of concrete composites. The WPFT fibres with a length of 20 mm were used at dosages of 0–1% in two groups of concrete with 100% ordinary Portland cement (OPC) and 30% palm oil fuel ash (POFA) as partial cement replacement. The results revealed that WPFT fibres had an adverse effect on the workability and compressive strength of concrete mixes. Despite a slight reduction in compressive strength of concrete mixtures, tensile and flexural strengths significantly enhanced up to 25% with the addition of WPFT fibres. The impact resistance and energy absorption values of concrete specimens reinforced with 1% WPFT fibres were found to be about 7.5 times higher than those of plain concrete mix. The utilisation of waste plastic food trays in the production of concrete makes it low-cost and aids in decreasing waste discarding harms. The development of new construction materials using WPFT is significant to the environment and construction industry.

Sign in / Sign up

Export Citation Format

Share Document