scholarly journals 3D analysis of microvasculature in murine liver fibrosis models using synchrotron radiation-based microtomography

Angiogenesis ◽  
2020 ◽  
Author(s):  
Willi L. Wagner ◽  
Sonja Föhst ◽  
Jessica Hock ◽  
Yong Ook Kim ◽  
Yury Popov ◽  
...  
Keyword(s):  
Synchrotron Radiation ◽  
Liver Fibrosis ◽  
Vascular System ◽  
Fibrous Tissue ◽  
Three Dimensional ◽  
Organ Damage ◽  
Scar Tissue ◽  
3D Analysis ◽  
Electron Microscopic ◽  
Capillary Blood Vessel

Abstract Cirrhosis describes the development of excess fibrous tissue around regenerative nodules in response to chronic liver injury and usually leads to irreversible organ damage and end-stage liver disease. During the development of cirrhosis, the formation of collagenous scar tissue is paralleled by a reorganization and remodeling of the hepatic vascular system. To date, macrovascular remodeling in various cirrhosis models has been examined using three-dimensional (3D) imaging modalities, while microvascular changes have been studied mainly by two-dimensional (2D) light microscopic and electron microscopic imaging. Here, we report on the application of high-resolution 3D synchrotron radiation-based microtomography (SRμCT) for the study of the sinusoidal and capillary blood vessel system in three murine models of advanced parenchymal and biliary hepatic fibrosis. SRμCT facilitates the characterization of microvascular architecture and identifies features of intussusceptive angiogenesis in progressive liver fibrosis in a non-destructive 3D manner.

Freeze-Fracture Replication in the Ultrastructure of Blue-Green Algae

1967 ◽  
Vol 25 ◽  
pp. 74-75
Author(s):  
L. V. Leak
Keyword(s):  
Cell Wall ◽  
Electron Microscope ◽  
Green Algae ◽  
Three Dimensional ◽  
Freeze Fracture ◽  
Electron Microscopic ◽  
Photosynthetic Membranes ◽  
Blue Green Algae ◽  
Cell Biol ◽  
Cellular Components

Electron microscopic observations of freeze-fracture replicas of Anabaena cells obtained by the procedures described by Bullivant and Ames (J. Cell Biol., 1966) indicate that the frozen cells are fractured in many different planes. This fracturing or cleaving along various planes allows one to gain a three dimensional relation of the cellular components as a result of such a manipulation. When replicas that are obtained by the freeze-fracture method are observed in the electron microscope, cross fractures of the cell wall and membranes that comprise the photosynthetic lamellae are apparent as demonstrated in Figures 1 & 2.A large portion of the Anabaena cell is composed of undulating layers of cytoplasm that are bounded by unit membranes that comprise the photosynthetic membranes. The adjoining layers of cytoplasm are closely apposed to each other to form the photosynthetic lamellae. Occassionally the adjacent layers of cytoplasm are separated by an interspace that may vary in widths of up to several 100 mu to form intralamellar vesicles.

Structural Role of rRNAs on the Ribosomal Subunits from E. Coli by Scanning Transmission Electron Microscopy

1981 ◽  
Vol 39 ◽  
pp. 424-425
Author(s):  
M. Boublik ◽  
N. Robakis ◽  
J.S. Wall
Keyword(s):  
Three Dimensional ◽  
Uranyl Acetate ◽  
Dimensional Structure ◽  
Electron Microscopic ◽  
Ribosomal Subunits ◽  
E Coli ◽  
Freeze Dried ◽  
16S Rna ◽  
Scanning Transmission ◽  
And Function

The three-dimensional structure and function of biological supramolecular complexes are, in general, determined and stabilized by conformation and interactions of their macromolecular components. In the case of ribosomes, it has been suggested that one of the functions of ribosomal RNAs is to act as a scaffold maintaining the shape of the ribosomal subunits. In order to investigate this question, we have conducted a comparative TEM and STEM study of the structure of the small 30S subunit of E. coli and its 16S RNA.The conventional electron microscopic imaging of nucleic acids is performed by spreading them in the presence of protein or detergent; the particles are contrasted by electron dense solution (uranyl acetate) or by shadowing with metal (tungsten). By using the STEM on freeze-dried specimens we have avoided the shearing forces of the spreading, and minimized both the collapse of rRNA due to air drying and the loss of resolution due to staining or shadowing. Figure 1, is a conventional (TEM) electron micrograph of 30S E. coli subunits contrasted with uranyl acetate.

A Scanning Electron Microscopic Study of Pro-Vascular Cellular Morphology in Chaetophora Incressata

1985 ◽  
Vol 43 ◽  
pp. 638-639
Author(s):  
A. E. Hotchkiss ◽  
A. T. Hotchkiss ◽  
R. P. Apkarian
Keyword(s):  
Green Algae ◽  
Vascular Plants ◽  
Vascular System ◽  
Higher Plants ◽  
Wall Structure ◽  
Electron Microscopic ◽  
Physiological Processes ◽  
Scanning Electron Microscopic Study ◽  
Scanning Electron Microscopic ◽  
Scanning Electron

Multicellular green algae may be an ancestral form of the vascular plants. These algae exhibit cell wall structure, chlorophyll pigmentation, and physiological processes similar to those of higher plants. The presence of a vascular system which provides water, minerals, and nutrients to remote tissues in higher plants was believed unnecessary for the algae. Among the green algae, the Chaetophorales are complex highly branched forms that might require some means of nutrient transport. The Chaetophorales do possess apical meristematic groups of cells that have growth orientations suggestive of stem and root positions. Branches of Chaetophora incressata were examined by the scanning electron microscope (SEM) for ultrastructural evidence of pro-vascular transport.

EMCAT: An automatic image-processing system for electron-microscopic tomography

1994 ◽  
Vol 52 ◽  
pp. 418-419
Author(s):  
Weiping Liu ◽  
John W. Sedat ◽  
David A. Agard
Keyword(s):  
Image Processing ◽  
Structural Information ◽  
Imaging Technique ◽  
Three Dimensional ◽  
Processing System ◽  
Electron Microscopic ◽  
Data Set ◽  
Ordered Structures ◽  
Automatic Image Processing ◽  
Em Tomography

Any real world object is three-dimensional. The principle of tomography, which reconstructs the 3-D structure of an object from its 2-D projections of different view angles has found application in many disciplines. Electron Microscopic (EM) tomography on non-ordered structures (e.g., subcellular structures in biology and non-crystalline structures in material science) has been exercised sporadically in the last twenty years or so. As vital as is the 3-D structural information and with no existing alternative 3-D imaging technique to compete in its high resolution range, the technique to date remains the kingdom of a brave few. Its tedious tasks have been preventing it from being a routine tool. One keyword in promoting its popularity is automation: The data collection has been automated in our lab, which can routinely yield a data set of over 100 projections in the matter of a few hours. Now the image processing part is also automated. Such automations finish the job easier, faster and better.

Central ossifying fibroma of mandible

2020 ◽  
Vol 13 (12) ◽  
pp. e239286
Author(s):  
Kumar Nilesh ◽  
Prashant Punde ◽  
Nitin Shivajirao Patil ◽  
Amol Gautam
Keyword(s):  
Fibrous Tissue ◽  
Three Dimensional ◽  
Facial Asymmetry ◽  
Ossifying Fibroma ◽  
Mandible Reconstruction ◽  
Three Dimensional Printing ◽  
Osseous Lesion ◽  
Large Size ◽  
Dimensional Printing

Ossifying fibroma (OF) is a rare, benign, fibro-osseous lesion of the jawbone characterised by replacement of the normal bone with fibrous tissue. The fibrous tissue shows varying amount of calcified structures resembling bone and/or cementum. The central variant of OF is rare, and shows predilection for mandible among the jawbone. Although it is classified as fibro-osseous lesion, it clinically behaves as a benign tumour and can grow to large size, causing bony swelling and facial asymmetry. This paper reports a case of large central OF of mandible in a 40-year-old male patient. The lesion was treated by segmental resection of mandible. Reconstruction of the surgical defect was done using avascular fibula bone graft. Role of three-dimensional printing of jaw and its benefits in surgical planning and reconstruction are also highlighted.

scholarly journals Three-dimensional assessment of the anterior and inferior loop of the inferior alveolar nerve using computed tomography images in patients with and without mandibular asymmetry

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Jae-Young Kim ◽  
Michael D. Han ◽  
Kug Jin Jeon ◽  
Jong-Ki Huh ◽  
Kwang-Ho Park
Keyword(s):  
Computed Tomography ◽  
Symmetry Group ◽  
Three Dimensional ◽  
Inferior Alveolar Nerve ◽  
Mental Foramen ◽  
3D Analysis ◽  
Mandibular Asymmetry ◽  
Computed Tomography Images ◽  
Significant Difference ◽  
Mandibular Body

Abstract Background The purpose of this study was to investigate the differences in configuration and dimensions of the anterior loop of the inferior alveolar nerve (ALIAN) in patients with and without mandibular asymmetry. Method Preoperative computed tomography images of patients who had undergone orthognathic surgery from January 2016 to December 2018 at a single institution were analyzed. Subjects were classified into two groups as “Asymmetry group” and “Symmetry group”. The distance from the most anterior and most inferior points of the ALIAN (IANant and IANinf) to the vertical and horizontal reference planes were measured (dAnt and dInf). The distance from IANant and IANinf to the mental foramen were also calculated (dAnt_MF and dInf_MF). The length of the mandibular body and symphysis area were measured. All measurements were analyzed using 3D analysis software. Results There were 57 total eligible subjects. In the Asymmetry group, dAnt and dAnt_MF on the non-deviated side were significantly longer than the deviated side (p < 0.001). dInf_MF on the non-deviated side was also significantly longer than the deviated side (p = 0.001). Mandibular body length was significantly longer on the non-deviated side (p < 0.001). There was no significant difference in length in the symphysis area (p = 0.623). In the Symmetry group, there was no difference between the left and right sides for all variables. Conclusion In asymmetric patients, there is a difference tendency in the ALIAN between the deviated and non-deviated sides. In patients with mandibular asymmetry, this should be considered during surgery in the anterior mandible.

scholarly journals Three-dimensional in situ morphometrics of Mycobacterium tuberculosis infection within lesions by optical mesoscopy and novel acid-fast staining

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Robert J. Francis ◽  
Gillian Robb ◽  
Lee McCann ◽  
Bhagwati Khatri ◽  
James Keeble ◽  
...  
Keyword(s):  
Mycobacterium Tuberculosis ◽  
Three Dimensional ◽  
Large Field ◽  
Staining Procedure ◽  
3D Analysis ◽  
Mycobacterium Tuberculosis Infection ◽  
In Vivo Models ◽  
Novel Approach

AbstractTuberculosis (TB) preclinical testing relies on in vivo models including the mouse aerosol challenge model. The only method of determining colony morphometrics of TB infection in a tissue in situ is two-dimensional (2D) histopathology. 2D measurements consider heterogeneity within a single observable section but not above and below, which could contain critical information. Here we describe a novel approach, using optical clearing and a novel staining procedure with confocal microscopy and mesoscopy, for three-dimensional (3D) measurement of TB infection within lesions at sub-cellular resolution over a large field of view. We show TB morphometrics can be determined within lesion pathology, and differences in infection with different strains of Mycobacterium tuberculosis. Mesoscopy combined with the novel CUBIC Acid-Fast (CAF) staining procedure enables a quantitative approach to measure TB infection and allows 3D analysis of infection, providing a framework which could be used in the analysis of TB infection in situ.

scholarly journals Dimensional Accuracy of Dental Models for Three-Unit Prostheses Fabricated by Various 3D Printing Technologies

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1550
Author(s):  
Soo-Yeon Yoo ◽  
Seong-Kyun Kim ◽  
Seong-Joo Heo ◽  
Jai-Young Koak ◽  
Joung-Gyu Kim
Keyword(s):  
Surface Roughness ◽  
Three Dimensional ◽  
Dimensional Accuracy ◽  
3D Analysis ◽  
Digital Light Processing ◽  
Test Models ◽  
Reference File ◽  
Significant Difference ◽  
Jet Printing ◽  
3D Printed

Previous studies on accuracy of three-dimensional (3D) printed model focused on full arch measurements at few points. The aim of this study was to examine the dimensional accuracy of 3D-printed models which were teeth-prepped for three-unit fixed prostheses, especially at margin and proximal contact areas. The prepped dental model was scanned with a desktop scanner. Using this reference file, test models were fabricated by digital light processing (DLP), Multi-Jet printing (MJP), and stereo-lithography apparatus (SLA) techniques. We calculated the accuracy (trueness and precision) of 3D-printed models on 3D planes, and deviations of each measured points at buccolingual and mesiodistal planes. We also analyzed the surface roughness of resin printed models. For overall 3D analysis, MJP showed significantly higher accuracy (trueness) than DLP and SLA techniques; however, there was not any statistically significant difference on precision. For deviations on margins of molar tooth and distance to proximal contact, MJP showed significantly accurate results; however, for a premolar tooth, there was no significant difference between the groups. 3D color maps of printed models showed contraction buccolingually, and surface roughness of the models fabricated by MJP technique was observed as the lowest. The accuracy of the 3D-printed resin models by DLP, MJP, and SLA techniques showed a clinically acceptable range to use as a working model for manufacturing dental prostheses

Sign in / Sign up

Export Citation Format

Share Document