scholarly journals Characterization of black crusts developed on historic stones with diverse mineralogy under different air quality environments

2021 ◽  
Author(s):  
José Santiago Pozo-Antonio ◽  
Carolina Cardell ◽  
Valeria Comite ◽  
Paola Fermo
Keyword(s):  
Complex Structure ◽  
Analytical Techniques ◽  
Passive Samplers ◽  
Atmospheric Pollutants ◽  
Quartz Fiber ◽  
Architectural Heritage ◽  
Air Contamination ◽  
Black Crusts ◽  
The Impact

AbstractBlack crusts (BCs) are one of the most critical alteration forms found on stones belonging to architectural heritage. Since they could be considered as passive samplers of atmospheric pollution, it would be plausible to establish relations between the air contamination and the BCs. With this aim, we have characterized BCs collected on historic buildings from two Spanish cities (Granada and Vigo) with different polluted atmospheres, as well as formed on stone substrates of varied mineralogy and texture. Likewise, in order to assess the impact of the atmospheric pollutants on the growth of BCs, quartz fiber filters were used as surrogate substrates and placed nearby the studied buildings to collect and analyze the aerosol particulate matter (PM). To this end, an array of complementary analytical techniques was used to evaluate the mineralogy, chemical composition, and texture of the BCs and to establish the correlation with the ions, OC (organic carbon), and EC (elemental carbon) detected in the PM on the quartz fiber filters. As result, BCs developed on carbonate substrates from Granada show more complex structure than those from Vigo, which are thinner because of frequent rain episodes. In both cities, NaCl, Pb-Cl, and Ca-Cl-rich particles, Ca-phosphate particles and clusters of Ba-sulfate-rich particles were detected. However, metal-rich rounded particles were more abundant in Granada’s BCs, including soot particles. BCs from Granada were richer in carbonaceous components (OC and EC) than the Vigo’s BCs. Although in the filters PM did not show EC—mainly due to traffic—, in the BCs from both locations OC and EC were detected. Therefore, this different composition was related to the mineralogy of the stones and the higher pollution of Granada in contrast to the industrial and sea-exposed city of Vigo.

scholarly journals Chemistry for Audio Heritage Preservation: A Review of Analytical Techniques for Audio Magnetic Tapes

Heritage ◽  
2019 ◽  
Vol 2 (2) ◽  
pp. 1551-1587
Author(s):  
Federica Bressan ◽  
Richard L. Hess ◽  
Paolo Sgarbossa ◽  
Roberta Bertani
Keyword(s):  
Analytical Techniques ◽  
Video Data ◽  
Cultural Resources ◽  
Chemical Identification ◽  
Heritage Preservation ◽  
The World ◽  
Instrumental Approaches ◽  
The Impact ◽  
Non Destructive

Vast and important cultural resources are entrusted to magnetic tape around the world, but they are susceptible to degradation, which may lead to severe replay problems. Audio magnetic tapes are complex and multicomponent devices containing organic compounds and metal systems, which can be potential catalysts for many degradative reactions in the presence of water, light, or heating. The aim of this review is to collect the literature concerning the analytical determinations and instrumental approaches that can achieve the chemical identification of the components in the tape and the degradation state. Thus, a combination of destructive (such as acetone extraction) and non-destructive techniques (such as ATR FTIR spectroscopy) have been proposed, together with SEM, ESEM, XRD and TGA analyses to assess the chemical and physical characterization of the tape with the purpose to individualize restoration treatments and optimize conditions for preservation. The impact of the studies reviewed in this paper may go beyond audio, being potentially relevant to video, data, instrumentation, and logging tapes.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Some applications of electron beam microanalysis techniques in VLSI process evaluation

1983 ◽  
Vol 41 ◽  
pp. 160-161
Author(s):  
Simon Thomas
Keyword(s):  
Integrated Circuits ◽  
Process Evaluation ◽  
Large Scale ◽  
Technology Development ◽  
Analytical Techniques ◽  
Successful Implementation ◽  
Analysis Of Failures ◽  
Characterization Of Materials ◽  
Circuits Vlsi

Trends in the technology development of very large scale integrated circuits (VLSI) have been in the direction of higher density of components with smaller dimensions. The scaling down of device dimensions has been not only laterally but also in depth. Such efforts in miniaturization bring with them new developments in materials and processing. Successful implementation of these efforts is, to a large extent, dependent on the proper understanding of the material properties, process technologies and reliability issues, through adequate analytical studies. The analytical instrumentation technology has, fortunately, kept pace with the basic requirements of devices with lateral dimensions in the micron/ submicron range and depths of the order of nonometers. Often, newer analytical techniques have emerged or the more conventional techniques have been adapted to meet the more stringent requirements. As such, a variety of analytical techniques are available today to aid an analyst in the efforts of VLSI process evaluation. Generally such analytical efforts are divided into the characterization of materials, evaluation of processing steps and the analysis of failures.

A very rapid in situ Kikuchi technique to determine relative crystal misorientation

1988 ◽  
Vol 46 ◽  
pp. 830-831
Author(s):  
J. I. Bennetch
Keyword(s):  
Electron Beam ◽  
Analytical Techniques ◽  
Superplastic Forming ◽  
The Other ◽  
Kikuchi Pattern ◽  
Kikuchi Line ◽  
Line Analysis

In a recent study of the superplastic forming (SPF) behavior of certain Al-Li-X alloys, the relative misorientation between adjacent (sub)grains proved to be an important parameter. It is well established that the most accurate way to determine misorientation across boundaries is by Kikuchi line analysis. However, the SPF study required the characterization of a large number of (sub)grains in each sample to be statistically meaningful, a very time-consuming task even for comparatively rapid Kikuchi analytical techniques.In order to circumvent this problem, an alternate, even more rapid in-situ Kikuchi technique was devised, eliminating the need for the developing of negatives and any subsequent measurements on photographic plates. All that is required is a double tilt low backlash goniometer capable of tilting ± 45° in one axis and ± 30° in the other axis. The procedure is as follows. While viewing the microscope screen, one merely tilts the specimen until a standard recognizable reference Kikuchi pattern is centered, making sure, at the same time, that the focused electron beam remains on the (sub)grain in question.

Comparison of Ion-Milling Techniques For Cross-Sectional TEM of Semiconductors

1985 ◽  
Vol 43 ◽  
pp. 166-167
Author(s):  
Julia T. Luck ◽  
C. W. Boggs ◽  
S. J. Pennycook
Keyword(s):  
Analytical Techniques ◽  
Sample Surface ◽  
Ion Milling ◽  
Cross Sectional ◽  
Reliable Technique ◽  
Near Surface ◽  
Transmission Electron ◽  
Thin Region ◽  
Transient Thermal

The use of cross-sectional Transmission Electron Microscopy (TEM) has become invaluable for the characterization of the near-surface regions of semiconductors following ion-implantation and/or transient thermal processing. A fast and reliable technique is required which produces a large thin region while preserving the original sample surface. New analytical techniques, particularly the direct imaging of dopant distributions, also require good thickness uniformity. Two methods of ion milling are commonly used, and are compared below. The older method involves milling with a single gun from each side in turn, whereas a newer method uses two guns to mill from both sides simultaneously.

Exploring the characterization of Ni doped MgO nanoparticles using co-precipitation method

2020 ◽  
Vol 3 (1) ◽  
pp. 30-33
Author(s):  
Muthulakshmi M ◽  
Madhumitha G
Keyword(s):  
Magnesium Oxide ◽  
Analytical Techniques ◽  
Nickel Chloride ◽  
Precipitation Method ◽  
Crystalline Powder ◽  
High Melting Point ◽  
Design Synthesis ◽  
Mgo Nanoparticles ◽  
Co Precipitation

Nanotechnology is a field of applied science focused on design, synthesis and characterization of nanomaterials. The nickel and magnesium have improved their applications in transparent electrodes and nano electronics. In addition, magnesium oxide has moisture resistance and high melting point properties. In the present work has been carried out in the development of green crystalline powder of nickel doped magnesium oxide nanoparticles by Co-precipitation method, from the mixture of nickel chloride and magnesium chloride with KOH as solvent. From the XRD results, crystalline size of the particle can be observed. Spherical structure of Ni doped MgO nanoparticles were indicated by SEM results and powdered composition of samples were obtained from FTIR. EDAX represents the peak composition of the nanoparticle. The above analytical techniques have confirmed that the Ni doped MgO nanoparticles obtained from the mixture of NiCl2 and MgCl2.

The Analyses of Learning Strategies in English as a Second Language: Theoretical Classification and Measurement Test

2020 ◽  
Vol 4 (2) ◽  
pp. 118-129
Author(s):  
Asti Gumartifa ◽  
◽  
Indah Windra Dwie Agustiani
Keyword(s):  
Language Learning ◽  
Learning Outcomes ◽  
Learning Strategies ◽  
Learning Process ◽  
English Learners ◽  
English Language ◽  
Point Of View ◽  
Effective Learning ◽  
The Impact

Gaining English language learning effectively has been discussed all years long. Similarly, Learners have various troubles outcomes in the learning process. Creating a joyful and comfortable situation must be considered by learners. Thus, the implementation of effective learning strategies is certainly necessary for English learners. This descriptive study has two purposes: first, to introduce the classification and characterization of learning strategies such as; memory, cognitive, metacognitive, compensation, social, and affective strategies that are used by learners in the classroom and second, it provides some questionnaires item based on Strategy of Inventory for Language Learning (SILL) version 5.0 that can be used to examine the frequency of students’ learning strategies in the learning process. The summary of this study explains and discusses the researchers’ point of view on the impact of learning outcomes by learning strategies used. Finally, utilizing appropriate learning strategies are certainly beneficial for both teachers and learners to achieve the learning target effectively.

scholarly journals Modulation of Gut Microbiota and Oxidative Status by β-Carotene in Late Pregnant Sows

2020 ◽  
Vol 7 ◽  
Author(s):  
Xupeng Yuan ◽  
Jiahao Yan ◽  
Ruizhi Hu ◽  
Yanli Li ◽  
Ying Wang ◽  
...  
Keyword(s):  
Gut Microbiota ◽  
Dietary Supplementation ◽  
Basal Diet ◽  
Fecal Microbiota ◽  
Control Group ◽  
Metabolic Activities ◽  
The Impact ◽  
Positive Effect ◽  
Β Carotene

Recent evidences suggest that gut microbiota plays an important role in regulating physiological and metabolic activities of pregnant sows, and β-carotene has a potentially positive effect on reproduction, but the impact of β-carotene on gut microbiota in pregnant sows remains unknown. This study aimed to explore the effect and mechanisms of β-carotene on the reproductive performance of sows from the aspect of gut microbiota. A total of 48 hybrid pregnant sows (Landrace × Yorkshire) with similar parity were randomly allocated into three groups (n = 16) and fed with a basal diet or a diet containing 30 or 90 mg/kg of β-carotene from day 90 of gestation until parturition. Dietary supplementation of 30 or 90 mg/kg β-carotene increased the number of live birth to 11.82 ± 1.54 and 12.29 ± 2.09, respectively, while the control group was 11.00 ± 1.41 (P = 0.201). Moreover, β-carotene increased significantly the serum nitric oxide (NO) level and glutathione peroxidase (GSH-Px) activity (P < 0.05). Characterization of fecal microbiota revealed that 90 mg/kg β-carotene increased the diversity of the gut flora (P < 0.05). In particular, β-carotene decreased the relative abundance of Firmicutes including Lachnospiraceae AC2044 group, Lachnospiraceae NK4B4 group and Ruminococcaceae UCG-008, but enriched Proteobacteria including Bilophila and Sutterella, and Actinobacteria including Corynebacterium and Corynebacterium 1 which are related to NO synthesis. These data demonstrated that dietary supplementation of β-carotene may increase antioxidant enzyme activity and NO, an important vasodilator to promote the neonatal blood circulation, through regulating gut microbiota in sows.

scholarly journals Clonal approaches to understanding the impact of mutations on hematologic disease development

Blood ◽  
2019 ◽  
Vol 133 (13) ◽  
pp. 1436-1445 ◽  
Author(s):  
Jyoti Nangalia ◽  
Emily Mitchell ◽  
Anthony R. Green
Keyword(s):  
Somatic Mutations ◽  
Clonal Selection ◽  
Single Cells ◽  
Driver Mutations ◽  
Great Promise ◽  
Tumor Evolution ◽  
Disease Development ◽  
Hematopoietic Tissue ◽  
The Impact

Abstract Interrogation of hematopoietic tissue at the clonal level has a rich history spanning over 50 years, and has provided critical insights into both normal and malignant hematopoiesis. Characterization of chromosomes identified some of the first genetic links to cancer with the discovery of chromosomal translocations in association with many hematological neoplasms. The unique accessibility of hematopoietic tissue and the ability to clonally expand hematopoietic progenitors in vitro has provided fundamental insights into the cellular hierarchy of normal hematopoiesis, as well as the functional impact of driver mutations in disease. Transplantation assays in murine models have enabled cellular assessment of the functional consequences of somatic mutations in vivo. Most recently, next-generation sequencing–based assays have shown great promise in allowing multi-“omic” characterization of single cells. Here, we review how clonal approaches have advanced our understanding of disease development, focusing on the acquisition of somatic mutations, clonal selection, driver mutation cooperation, and tumor evolution.

Sign in / Sign up

Export Citation Format

Share Document