Analysis of the Diffraction Pattern Generated by the Wings of Graphium sarpedon

2022 ◽  
Vol 52 (2) ◽  
Author(s):  
Toshihiro Nonaka ◽  
Shota Amano ◽  
Keisuke Shinohara ◽  
Taisei Kitawaki ◽  
Takahiko Ban ◽  
...  
Keyword(s):  
Diffraction Pattern

Analysis of electron-diffraction intensity profiles using a photodiode-array detection system

1983 ◽  
Vol 41 ◽  
pp. 322-323
Author(s):  
J. B. Warren
Keyword(s):  
Electron Diffraction ◽  
Diffraction Pattern ◽  
Detection System ◽  
High Energy ◽  
Photographic Emulsion ◽  
Diffraction Intensity ◽  
Silicon Photodiode ◽  
Photodiode Array Detection ◽  
Analog To Digital ◽  
Photodiode Array

Electron diffraction intensity profiles have been used extensively in studies of polycrystalline and amorphous thin films. In previous work, diffraction intensity profiles were quantitized either by mechanically scanning the photographic emulsion with a densitometer or by using deflection coils to scan the diffraction pattern over a stationary detector. Such methods tend to be slow, and the intensities must still be converted from analog to digital form for quantitative analysis. The Instrumentation Division at Brookhaven has designed and constructed a electron diffractometer, based on a silicon photodiode array, that overcomes these disadvantages. The instrument is compact (Fig. 1), can be used with any unmodified electron microscope, and acquires the data in a form immediately accessible by microcomputer.Major components include a RETICON 1024 element photodiode array for the de tector, an Analog Devices MAS-1202 analog digital converter and a Digital Equipment LSI 11/2 microcomputer. The photodiode array cannot detect high energy electrons without damage so an f/1.4 lens is used to focus the phosphor screen image of the diffraction pattern on to the photodiode array.

Light Optical Diffraction Studies of Macromolecular Ultrastructure

1970 ◽  
Vol 28 ◽  
pp. 258-259
Author(s):  
Glen B. Haydon
Keyword(s):  
High Resolution ◽  
Diffraction Analysis ◽  
Diffraction Pattern ◽  
Electron Micrographs ◽  
Optical Diffraction ◽  
Electron Micrograph ◽  
Its Analysis ◽  
Resolution Electron ◽  
Diffraction Patterns

Analysis of light optical diffraction patterns produced by electron micrographs can easily lead to much nonsense. Such diffraction patterns are referred to as optical transforms and are compared with transforms produced by a variety of mathematical manipulations. In the use of light optical diffraction patterns to study periodicities in macromolecular ultrastructures, a number of potential pitfalls have been rediscovered. The limitations apply to the formation of the electron micrograph as well as its analysis.(1) The high resolution electron micrograph is itself a complex diffraction pattern resulting from the specimen, its stain, and its supporting substrate. Cowley and Moodie (Proc. Phys. Soc. B, LXX 497, 1957) demonstrated changing image patterns with changes in focus. Similar defocus images have been subjected to further light optical diffraction analysis.

Electron Diffraction Analysis of Microtwin Structures in Regrown (III) Silicon

1982 ◽  
Vol 40 ◽  
pp. 460-461
Author(s):  
P. Ling ◽  
R. Gronsky ◽  
J. Washburn
Keyword(s):  
Electron Diffraction ◽  
Ion Implantation ◽  
Diffraction Analysis ◽  
Diffraction Pattern ◽  
Direct Consequence ◽  
The Other ◽  
Electron Diffraction Analysis ◽  
Defect Microstructures ◽  
Ion Implanted

The defect microstructures of Si arising from ion implantation and subsequent regrowth for a (111) substrate have been found to be dominated by microtwins. Figure 1(a) is a typical diffraction pattern of annealed ion-implanted (111) Si showing two groups of extra diffraction spots; one at positions (m, n integers), the other at adjacent positions between <000> and <220>. The object of the present paper is to show that these extra reflections are a direct consequence of the microtwins in the material.

Video-Enhanced Microscopy--Better Visibility of Plant Cell Structures

1982 ◽  
Vol 40 ◽  
pp. 182-185
Author(s):  
N.S. Allen ◽  
R.D. Allen
Keyword(s):  
Diffraction Pattern ◽  
Theoretical Basis ◽  
Numerical Aperture ◽  
Gain Control ◽  
Control Unit ◽  
Camera Control ◽  
Variable Gain ◽  
Contrast Method ◽  
Fine Detail ◽  
Cell Structures

Various methods of video-enhanced microscopy combine TV cameras with light microscopes creating images with improved resolution, contrast and visibility of fine detail, which can be recorded rapidly and relatively inexpensively. The AVEC (Allen Video-enhanced Contrast) method avoids polarizing rectifiers, since the microscope is operated at retardations of λ/9- λ/4, where no anomaly is seen in the Airy diffraction pattern. The iris diaphram is opened fully to match the numerical aperture of the condenser to that of the objective. Under these conditions, no image can be realized either by eye or photographically. Yet the image becomes visible using the Hamamatsu C-1000-01 binary camera, if the camera control unit is equipped with variable gain control and an offset knob (which sets a clamp voltage of a D.C. restoration circuit). The theoretical basis for these improvements has been described.

Convergent Beam Electron Diffraction

1978 ◽  
Vol 36 (3) ◽  
pp. 304-315
Author(s):  
G. Lehmpfuhl
Keyword(s):  
Electron Diffraction ◽  
Diffraction Pattern ◽  
Crystal Surface ◽  
Diffraction Spot ◽  
Crystal Thickness ◽  
Large Area ◽  
Electron Microscopic ◽  
Additional Information ◽  
Microscopic Investigations

Introduction In electron microscopic investigations of crystalline specimens the direct observation of the electron diffraction pattern gives additional information about the specimen. The quality of this information depends on the quality of the crystals or the crystal area contributing to the diffraction pattern. By selected area diffraction in a conventional electron microscope, specimen areas as small as 1 µ in diameter can be investigated. It is well known that crystal areas of that size which must be thin enough (in the order of 1000 Å) for electron microscopic investigations are normally somewhat distorted by bending, or they are not homogeneous. Furthermore, the crystal surface is not well defined over such a large area. These are facts which cause reduction of information in the diffraction pattern. The intensity of a diffraction spot, for example, depends on the crystal thickness. If the thickness is not uniform over the investigated area, one observes an averaged intensity, so that the intensity distribution in the diffraction pattern cannot be used for an analysis unless additional information is available.

Measurement and Reduction of Radiation Damage in Frozen Hydrated Crystalline Specimens

1978 ◽  
Vol 36 (3) ◽  
pp. 70-77 ◽  
Author(s):  
R.M. Glaeser ◽  
S.B. Hayward
Keyword(s):  
Diffraction Pattern ◽  
Structural Information ◽  
Structural Disorder ◽  
Structural Features ◽  
Biological Macromolecules ◽  
Diffraction Intensity ◽  
Object Structure ◽  
Specimen Material ◽  
Unit Cells ◽  
Identical Unit

Highly ordered or crystalline biological macromolecules become severely damaged and structurally disordered after a brief electron exposure. Evidence that damage and structural disorder are occurring is clearly given by the fading and eventual disappearance of the specimen's electron diffraction pattern. The fading and disappearance of sharp diffraction spots implies a corresponding disappearance of periodic structural features in the specimen. By the same token, there is a oneto- one correspondence between the disappearance of the crystalline diffraction pattern and the disappearance of reproducible structural information that can be observed in the images of identical unit cells of the object structure. The electron exposures that result in a significant decrease in the diffraction intensity will depend somewhat upon the resolution (Bragg spacing) involved, and can vary considerably with the chemical makeup and composition of the specimen material.

Electron Microscopy of Shock Loaded Polycrystalline Beryllium

1974 ◽  
Vol 32 ◽  
pp. 506-507 ◽  
Author(s):  
J. M. Galbraith ◽  
L. E. Murr ◽  
A. L. Stevens
Keyword(s):  
Electron Microscopy ◽  
Wave Propagation ◽  
Structural Change ◽  
Single Crystal ◽  
Diffraction Pattern ◽  
Shock Loading ◽  
Slip Systems ◽  
Compression Tests ◽  
X Ray Diffraction ◽  
X Ray

Uniaxial compression tests and hydrostatic tests at pressures up to 27 kbars have been performed to determine operating slip systems in single crystal and polycrystal1ine beryllium. A recent study has been made of wave propagation in single crystal beryllium by shock loading to selectively activate various slip systems, and this has been followed by a study of wave propagation and spallation in textured, polycrystal1ine beryllium. An alteration in the X-ray diffraction pattern has been noted after shock loading, but this alteration has not yet been correlated with any structural change occurring during shock loading of polycrystal1ine beryllium.This study is being conducted in an effort to characterize the effects of shock loading on textured, polycrystal1ine beryllium. Samples were fabricated from a billet of Kawecki-Berylco hot pressed HP-10 beryllium.

Cytomembrane Preservation in Tissue Dehydrated Only With Glutaraldehyde and Epon 812 Resin

1973 ◽  
Vol 31 ◽  
pp. 320-321
Author(s):  
Daniel C. Pease
Keyword(s):  
Diffraction Pattern ◽  
X Ray Diffraction ◽  
High Concentration ◽  
Unpublished Study ◽  
X Ray ◽  
Sectioned Material

A previous study demonstrated that tissue could be successfully infiltrated with 50% glutaraldehyde, and then subsequently polymerized with urea to create an embedment which retained cytomembrane lipids in sectioned material. As a result, the 180-190 Å periodicity characteristic of fresh, mammalian myelin was preserved in sections, as was a brilliant birefringence, and the capacity to bind OsO4 vapor in the hydrophobic bilayers. An associated (unpublished) study, carried out in co-operation with Drs. C.K. Akers and D.F. Parsons, demonstrated that the high concentration of glutaraldehyde (and urea) did not significantly alter the X-ray diffraction pattern of aldehyde-fixed, myelin. Thus, by itself, 50% glutaraldehyde has little effect upon cytomembrane systems and can be used with confidence for the first stages of dehydration.

Transmission Electron Microscopy studies of the vacancy ordering in YSI2-X thin films

1991 ◽  
Vol 49 ◽  
pp. 562-563
Author(s):  
F.-R. Chen ◽  
T. L. Lee ◽  
L. J. Chen
Keyword(s):  
Crystal Structure ◽  
Electron Microscopy ◽  
Thin Films ◽  
Diffraction Pattern ◽  
Annealing Temperature ◽  
Lattice Mismatch ◽  
Si Substrate ◽  
Metal Thin Films ◽  
Transmission Electron ◽  
Vacancy Ordering

YSi2-x thin films were grown by depositing the yttrium metal thin films on (111)Si substrate followed by a rapid thermal annealing (RTA) at 450 to 1100°C. The x value of the YSi2-x films ranges from 0 to 0.3. The (0001) plane of the YSi2-x films have an ideal zero lattice mismatch relative to (111)Si surface lattice. The YSi2 has the hexagonal AlB2 crystal structure. The orientation relationship with Si was determined from the diffraction pattern shown in figure 1(a) to be and . The diffraction pattern in figure 1(a) was taken from a specimen annealed at 500°C for 15 second. As the annealing temperature was increased to 600°C, superlattice diffraction spots appear at position as seen in figure 1(b) which may be due to vacancy ordering in the YSi2-x films. The ordered vacancies in YSi2-x form a mesh in Si plane suggested by a LEED experiment.

The Morphology and Crystallography of Diesel Particulate Emissions

1981 ◽  
Vol 39 ◽  
pp. 148-149
Author(s):  
R. Stevenson
Keyword(s):  
Diffraction Pattern ◽  
Carbon Films ◽  
Particulate Emissions ◽  
Diesel Particulate ◽  
Amorphous Carbon Films ◽  
Turbostratic Carbon ◽  
Diesel Particles ◽  
Tem Mode ◽  
Exhaust Stream ◽  
Diffraction Patterns

A study has been made of the morphology and crystallography of particulate emissions from indirect injection diesel engines. This particulate matter consists substantially of carbon (although hydrocarbons can be extracted with solvents). Samples were collected in a diluted exhaust stream on amorphous carbon films and examined in a JEM-200C electron microscope operated in the TEM mode with an accelerating voltage of 200 KV.The morphology of the diesel particles, as shown in Fig. 1, markedly resembles carbon blacks and consists of an agglomeration of quasispherical subunits arranged in chains or clusters. Only limited changes in morphology were observed as the number of subunits in the particle increased (although larger particles tended to be more cluster-like than the extended chain shown in Fig. 1). However, a dramatic effect of the number of subunits was observed on the character of the diffraction pattern. Smaller particles yielded a diffraction pattern consisting of very diffuse rings typical of turbostratic carbon; the diffraction patterns from the larger particles, however, although qualitatively similar, exhibited much sharper and less diffuse ring patterns.

Sign in / Sign up

Export Citation Format

Share Document