Transformation of Al-CDC from 3D crystals to 2D nanosheets in macroporous polyacrylates with enhanced CH4/N2 separation efficiency and stability

2022 ◽  
Vol 429 ◽  
pp. 132285
Author(s):  
Wanru Feng ◽  
Hao Wu ◽  
Junsu Jin ◽  
Dahuan Liu ◽  
Hong Meng ◽  
...  
Keyword(s):  
Separation Efficiency ◽  
2D Nanosheets

Applicability of electrodialysis to the separation of sodium acetate from synthetic alkaline hardwood extract

TAPPI Journal ◽  
2015 ◽  
Vol 14 (11) ◽  
pp. 695-708 ◽  
Author(s):  
RAVIKANT PATIL ◽  
CHI TRUONG ◽  
JOSEPH GENCO ◽  
HEMANT PENDSE ◽  
ADRIAAN VAN HEININGEN
Keyword(s):  
Current Density ◽  
Sodium Sulfate ◽  
Sodium Acetate ◽  
Separation Efficiency ◽  
Feed Concentration ◽  
Initial Concentration ◽  
White Liquor ◽  
Complete Extraction ◽  
Electro Osmosis ◽  
Preliminary Separation

Our objective was to develop a process for recovering acetyl groups from industrial northeast hardwood chips. Extraction experiments showed that the white liquor charge of 6% effective alkali at 50°C and liquor-to-wood ratio of 4:1 leads to the complete extraction of acetyl groups from industrial hardwood chips. Electrodialysis was assessed as a technique for separating and concentrating sodium acetate from synthetic hardwood extract. Preliminary separation experiments using dilute sodium acetate showed that the sodium acetate can be concentrated up to approximately 24% by weight from an initial concentration of about 2% by weight. The effects of current density, feed concentration, electro-osmosis, and osmosis on the separation of sodium acetate were evaluated. Finally, selectivity experiments were performed to study the effect of various components of the white liquor on the separation of sodium acetate. Fully oxidized synthetic white liquor was used in selectivity experiments to avoid deleterious effects of Na2S. Selectivity experiments using synthetic oxidized white liquor showed a significant decrease in the separation efficiency due to the presence of sodium hydroxide, sodium carbonate, and sodium sulfate in the synthetic extract.

Experimental Studies Concerning the Semipermeable Membrane Separation Efficiency for 134Cs, 137Cs, 57Co, 58Co, 60Co, 54Mn in Liquid Radioactive Waste I. Treatment of secondary waste from POD decontamination procedure

2008 ◽  
Vol 59 (5) ◽  
Author(s):  
Mirela Dulama ◽  
Nicoleta Deneanu ◽  
Cristian Dulama ◽  
Margarit Pavelescu
Keyword(s):  
Membrane Separation ◽  
Separation Efficiency ◽  
Liquid Radioactive Waste ◽  
Experimental Studies ◽  
Experimental Tests ◽  
Suspended Solid ◽  
Process Efficiency ◽  
Active Charcoal ◽  
Precipitation Process ◽  
Pre Treatment

The paper presents the experimental tests concerning the treatment by membrane techniques of radioactive aqueous waste. Solutions, which have been treated by using the bench-scale installation, were radioactive simulated secondary wastes from the decontamination process with modified POD. Generally, an increasing of the retention is observed for most of the contaminants in the reverse osmosis experiments with pre-treatment steps. The main reason for taking a chemical treatment approach was to selectively remove soluble contaminants from the waste. In the optimization part of the precipitation step, several precipitation processes were compared. Based on this comparison, mixed [Fe(CN)6]4-/Al3+/Fe2+ was selected as a precipitation process applicable for precipitation of radionuclides and flocculation of suspended solid. Increased efficiencies for cesium radionuclides removal were obtained in natural zeolite adsorption pre-treatment stages and this was due to the fact that volcanic tuff used has a special affinity for this element. Usually, the addition of powdered active charcoal serves as an advanced purifying method used to remove organic compounds and residual radionuclides; thus by analyzing the experimental data (for POD wastes) one can observe a decreasing of about 50% for cobalt isotopes subsequently to the active charcoal adsorption.. The semipermeable membranes were used, which were prepared by the researchers from the Research Center for Macromolecular Materials and Membranes, Bucharest. The process efficiency was monitored by gamma spectrometry.

Experience with Vortex Separators for Combined Sewer Overflow Control

1993 ◽  
Vol 27 (5-6) ◽  
pp. 93-104 ◽  
Author(s):  
H. Brombach ◽  
C. Xanthopoulos ◽  
H. H. Hahn ◽  
W. C. Pisano
Keyword(s):  
Separation Efficiency ◽  
Operational Reliability ◽  
Second Phase ◽  
Combined Sewer Overflow ◽  
Specific Storage ◽  
Impervious Area ◽  
Evaluation Phase ◽  
Combined Sewer ◽  
Sewer Overflow ◽  
Overflow Control

In 1987 the first vortex solids separator facility in Germany was installed for combined sewer overflow (CSO) control. The separation efficiency was optimized in the hydraulic laboratory using scaled down models with artificial tracers to simulate typical sewage particulates. The station has two parallel operating vortex separators and serves a connected and impervious area of about 11 hectares (ha) and 1,500 people. The specific storage volume of the station is 7.2 m3 per ha. Two evaluation programs were conducted. The first evaluation phase noted the operational reliability, hydraulic loads, overflow frequencies and water mass balances. The second phase monitored separation efficiencies. The evaluation showed that vortex solids separators are now ready for use in CSO control.

Field testing CFD-based predictions of storage chamber gross solids separation efficiency

1999 ◽  
Vol 39 (9) ◽  
pp. 161-168 ◽  
Author(s):  
Virginia R. Stovin ◽  
Adrian J. Saul ◽  
Andrew Drinkwater ◽  
Ian Clifforde
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Settling Velocity ◽  
Separation Efficiency ◽  
Flow Patterns ◽  
Total Efficiency ◽  
Separation Performance ◽  
Storage Chamber ◽  
Solids Separation ◽  
Simulated Flow

The use of computational fluid dynamics-based techniques for predicting the gross solids and finely suspended solids separation performance of structures within urban drainage systems is becoming well established. This paper compares the result of simulated flow patterns and gross solids separation predictions with field measurements made in a full size storage chamber. The gross solids retention efficiency was measured for six different storage chambers in the field and simulations of these chambers were undertaken using the Fluent computational fluid dynamics software. Differences between the observed and simulated flow patterns are discussed. The simulated flow fields were used to estimate chamber efficiency using particle tracking. Efficiency results are presented as efficiency cusps, with efficiency plotted as a function of settling velocity. The cusp represents a range of efficiency values, and approaches to the estimation of an overall efficiency value from these cusps are briefly discussed. Estimates of total efficiency based on the observed settling velocity distribution differed from the measured values by an average of ±17%. However, estimates of steady flow efficiency were consistently higher than the observed values. The simulated efficiencies agreed with the field observations in identifying the most efficient configuration.

Separation of Biologically Active Compounds by Membrane Operations

2017 ◽  
Vol 23 (2) ◽  
pp. 218-230 ◽  
Author(s):  
Xiaoying Zhu ◽  
Renbi Bai
Keyword(s):  
Energy Consumption ◽  
Bioactive Compounds ◽  
Membrane Fouling ◽  
Membrane Separation ◽  
Separation Efficiency ◽  
High Energy ◽  
Separation Processes ◽  
Membrane Processes ◽  
Separation Technology ◽  
Pressure Driven

Background: Bioactive compounds from various natural sources have been attracting more and more attention, owing to their broad diversity of functionalities and availabilities. However, many of the bioactive compounds often exist at an extremely low concentration in a mixture so that massive harvesting is needed to obtain sufficient amounts for their practical usage. Thus, effective fractionation or separation technologies are essential for the screening and production of the bioactive compound products. The applicatons of conventional processes such as extraction, distillation and lyophilisation, etc. may be tedious, have high energy consumption or cause denature or degradation of the bioactive compounds. Membrane separation processes operate at ambient temperature, without the need for heating and therefore with less energy consumption. The “cold” separation technology also prevents the possible degradation of the bioactive compounds. The separation process is mainly physical and both fractions (permeate and retentate) of the membrane processes may be recovered. Thus, using membrane separation technology is a promising approach to concentrate and separate bioactive compounds. Methods: A comprehensive survey of membrane operations used for the separation of bioactive compounds is conducted. The available and established membrane separation processes are introduced and reviewed. Results: The most frequently used membrane processes are the pressure driven ones, including microfiltration (MF), ultrafiltration (UF) and nanofiltration (NF). They are applied either individually as a single sieve or in combination as an integrated membrane array to meet the different requirements in the separation of bioactive compounds. Other new membrane processes with multiple functions have also been developed and employed for the separation or fractionation of bioactive compounds. The hybrid electrodialysis (ED)-UF membrane process, for example has been used to provide a solution for the separation of biomolecules with similar molecular weights but different surface electrical properties. In contrast, the affinity membrane technology is shown to have the advantages of increasing the separation efficiency at low operational pressures through selectively adsorbing bioactive compounds during the filtration process. Conclusion: Individual membranes or membrane arrays are effectively used to separate bioactive compounds or achieve multiple fractionation of them with different molecule weights or sizes. Pressure driven membrane processes are highly efficient and widely used. Membrane fouling, especially irreversible organic and biological fouling, is the inevitable problem. Multifunctional membranes and affinity membranes provide the possibility of effectively separating bioactive compounds that are similar in sizes but different in other physical and chemical properties. Surface modification methods are of great potential to increase membrane separation efficiency as well as reduce the problem of membrane fouling. Developing membranes and optimizing the operational parameters specifically for the applications of separation of various bioactive compounds should be taken as an important part of ongoing or future membrane research in this field.

Recent Advances in Heterostructured Photocatalysts for Degradation of Organic Pollutants.

2020 ◽  
Vol 17 ◽  
Author(s):  
Chen-Jing Sun ◽  
Li-Ping Zhao ◽  
Rui Wang
Keyword(s):  
Organic Pollutants ◽  
High Efficiency ◽  
Separation Efficiency ◽  
Organic Pollution ◽  
Utilization Rate ◽  
Type I ◽  
Human Beings ◽  
Global Challenge ◽  
Global Environmental ◽  
High Efficient

: With the development of industrialization, the global environmental pollution and energy crisis are becoming increasingly serious. Organic pollutants pose a serious health threat to human beings and other organisms. The removal of organic pollutants in environment has become a global challenge. The photocatalytic technology has been widely used in the degradation of organic pollutants with its characteristics of simple process, high efficiency, thorough degradation and no secondary pollution. However, the single photocatalyst represented by TiO2 has disadvantages of low light utilization rate and high recombination rate of photocarriers. Building heterojunction is considered one of the most effective methods to enhance the photocatalytic performance of single photocatalyst, which can improve the separation efficiency of photocarriers and utilization of visible light. The classical heterojunction can be divided into four different cases: type I, typeⅡ, p–n heterojunctions and Z-scheme junction. In this paper, the recent progress in the treatment of organic pollution by heterostructure photocatalysts is summarized and the mechanism of heterostructure photocatalysts for the treatment of organic pollutants is reviewed. It is expected that this paper can deepen the understanding of heterostructure photocatalysts and provide guidance for high efficient photocatalytic degradation of organic pollutants in the future.

High Performance Thin Layer Chromatography (HPTLC) for the Investigation of Medicinal Plants

2020 ◽  
Vol 16 ◽  
Author(s):  
Alper Gökbulut
Keyword(s):  
Medicinal Plants ◽  
High Performance ◽  
Separation Efficiency ◽  
Rapid Development ◽  
Herbal Remedies ◽  
Qualitative And Quantitative ◽  
Powerful Analytical Tool ◽  
Quantitative Examination ◽  
Data Acquisition And Processing ◽  
Layer Chromatography

Background: Chromatographic techniques such as TLC basically and, HPLC, GC, HPTLC equipped with various detectors are most frequently used for the qualitative and quantitative examination of herbals. Method: An overview of the recent literature concerning the usage of HPTLC for the analysis of medicinal plants has been reviewed. Results: During the last decade/s, HPTLC, a modern, sophisticated and automatized TLC technique with better and advanced separation efficiency, detection limit, data acquisition and processing, has been used for the analysis of herbal materials and preparations since the rapid development of technology in chromatography world. HPTLC with various detectors is a powerful analytical tool especially for the phytochemical applications such as herbal drug quantification and fingerprint analysis. Conclusion: In this review, a latest perspective has been established and some of the previous studies were summarized for the usage of HPTLC in the analysis of herbal remedies, dietary supplements and nutraceuticals.

"Recent Patents on the Triboelectrostatic Separation of Fly Ash"

2019 ◽  
Vol 13 ◽  
Author(s):  
Haisheng Li ◽  
Wenping Wang ◽  
Yinghua Chen ◽  
Xinxi Zhang ◽  
Chaoyong Li
Keyword(s):  
Fly Ash ◽  
Power Plants ◽  
High Efficiency ◽  
Separation Efficiency ◽  
High Reliability ◽  
Operating Conditions ◽  
Security Requirements ◽  
Unburned Carbon ◽  
Efficient Operation ◽  
Triboelectrostatic Separation

Background: The fly ash produced by coal-fired power plants is an industrial waste. The environmental pollution problems caused by fly ash have been widely of public environmental concern. As a waste of recoverable resources, it can be used in the field of building materials, agricultural fertilizers, environmental materials, new materials, etc. Unburned carbon content in fly ash has an influence on the performance of resource reuse products. Therefore, it is the key to remove unburned carbon from fly ash. As a physical method, triboelectrostatic separation technology has been widely used because of obvious advantages, such as high-efficiency, simple process, high reliability, without water resources consumption and secondary pollution. Objective: The related patents of fly ash triboelectrostatic separation had been reviewed. The structural characteristics and working principle of these patents are analyzed in detail. The results can provide some meaningful references for the improvement of separation efficiency and optimal design. Methods: Based on the comparative analysis for the latest patents related to fly ash triboelectrostatic separation, the future development is presented. Results: The patents focused on the charging efficiency and separation efficiency. Studies show that remarkable improvements have been achieved for the fly ash triboelectrostatic separation. Some patents have been used in industrial production. Conclusion: According to the current technology status, the researches related to process optimization and anti-interference ability will be beneficial to overcome the influence of operating conditions and complex environment, and meet system security requirements. The intelligent control can not only ensure the process continuity and stability, but also realize the efficient operation and management automatically. Meanwhile, the researchers should pay more attention to the resource utilization of fly ash processed by triboelectrostatic separation.

Demulsification of a Water-in-crude Oil Emulsion with a Corn Oil BasedDemulsifier using the Response Surface Methodology: Modelling and Optimization

2021 ◽  
Vol 14 ◽  
Author(s):  
Abed Saad ◽  
Nour Abdurahman ◽  
Rosli Mohd Yunus
Keyword(s):  
Response Surface Methodology ◽  
Crude Oil ◽  
Water Content ◽  
Response Surface ◽  
Separation Efficiency ◽  
Corn Oil ◽  
Oil Emulsion ◽  
Optimal Values ◽  
Input Variables ◽  
Oil Emulsions

: In this study, the Sany-glass test was used to evaluate the performance of a new surfactant prepared from corn oil as a demulsifier for crude oil emulsions. Central composite design (CCD), based on the response surface methodology (RSM), was used to investigate the effect of four variables, including demulsifier dosage, water content, temperature, and pH, on the efficiency of water removal from the emulsion. As well, analysis of variance was applied to examine the precision of the CCD mathematical model. The results indicate that demulsifier dose and emulsion pH are two significant parameters determining demulsification. The maximum separation efficiency of 96% was attained at an alkaline pH and with 3500 ppm demulsifier. According to the RSM analysis, the optimal values for the input variables are 40% water content, 3500 ppm demulsifier, 60 °C, and pH 8.

Sign in / Sign up

Export Citation Format

Share Document