scholarly journals APPROACH FOR THE AUTOMATED AND DATA-BASED DESIGN OF MECHANICAL JOINTS.

2021 ◽  
Vol 1 ◽  
pp. 521-530
Author(s):  
Christoph Zirngibl ◽  
Benjamin Schleich ◽  
Sandro Wartzack
Keyword(s):  
Expert Knowledge ◽  
Reference Model ◽  
High Reliability ◽  
Experimental Tests ◽  
Cold Forming ◽  
Mechanical Joints ◽  
Wide Range ◽  
The Individual ◽  
Transfer Of Information ◽  
Selection Of

AbstractAs a result of the increasing challenges in the field of lightweight constructions, the demand for efficient joining technologies is continuously rising. For this purpose, cold forming processes offer an environmental friendly and fast alternative to established joining methods (e.g. welding). However, to ensure a high reliability, not only the selection of an appropriate procedure, but also the dimensioning of the individual joint is essential. While product designers can rely on a wide range of design principles for thermal processes, the dimensioning and evaluation of mechanical joining processes is mainly based on expert knowledge and a few experimental tests. Although few studies already investigated the numerical analysis of mechanical joints, an approach for the sustainable and consistent optimization of the strength and reliability of joining connections for varying use-cases is not available yet. Motivated by this lack, this paper presents an approach for the automated transfer of information within the process chain and the data-based analysis of mechanical joints by using clinching as an example. Therefore, the CRISP-DM reference model is used for the systematic data mining.

scholarly journals Relationships between Functional Properties of Pervious Concrete

2020 ◽  
Vol 12 (16) ◽  
pp. 6318
Author(s):  
Alena Sičáková ◽  
Marek Kováč
Keyword(s):  
Grain Size ◽  
Water Cycle ◽  
High Reliability ◽  
Size Composition ◽  
Pervious Concrete ◽  
Void Content ◽  
Conventional Concrete ◽  
Research Activities ◽  
Wide Range ◽  
The Individual

Pervious concrete is characterized by its open-void structure, which gives it a number of specific properties and allows specific applications, including pervious pavements, residential roads, alleys, sidewalks, parking lots, patios, and so on. Permeable areas are extremely important for the creation of sustainable cities in terms of the water cycle. Due to its high void content and low cement/mortar content, pervious concrete generally may have significantly reduced strength when compared with conventional concrete. That is why a wide range of research activities is devoted to the balance between acceptable void content, strength, as well as other significant properties. Knowledge of the relationships between the individual properties is very important for understanding this specific material. In this paper, a wide range of 38 different composition variants has been tested to determine the dependencies between the essential properties of pervious concrete. The variables related to the type of aggregate, maximum grain size, the grain-size composition, the amount of binder, and the kind (composition) of binder. The dependencies reported in the article are defined with high reliability R2 ranging from 0.75 to 0.95. On the basis of the dependencies thus determined, it can be predicted that a density of min. 1740 kg/m3 must be reached to meet the requirement of min. 10 MPa for nonpavement applications, while a density of min. 1960 kg/m3 must be achieved to meet min. 20 MPa for pavement applications. The criteria of the void ratio for pavement applications can be set at 20 ± 3%, while the criteria for nonpavement applications can be set at 28 ± 6%.

scholarly journals THE TECHNIQUE OF FORMATION OF SYSTEM OF FORESTRY MACHINES

2017 ◽  
Vol 7 (1) ◽  
pp. 111-117 ◽  
Author(s):  
Мамматов ◽  
Vladimir Mammatov ◽  
Мохирев ◽  
Aleksandr Mokhirev
Keyword(s):  
Expert Knowledge ◽  
Stock Selection ◽  
Screening Criteria ◽  
Natural Production ◽  
Wide Range ◽  
Major Operation ◽  
Market Engineering ◽  
The Right ◽  
Production Conditions ◽  
Selection Of

A variety of natural-production conditions, which is necessary to conduct logging activities largely complicates the choice of forest machines for each individual company in the industry having logging sites in its composition. Depending on many natural and production conditions such as: slope, bearing capacity of soils, ambient temperature, maximum investments, etc., and the wide range of forestry equipment on the market, engineering divisions of the company solving a problem about the purchase of new or replacement of lost its performance machines are more and more difficult to make the right choice. This work presents a methodology for forming the system of forest machines with the natural and production conditions in a convenient form, not requiring special expert knowledge from the field of mathematical modeling or other areas of science. According to the methodology the first step is selection of basic machine and performing the first major operation in felling trees, then switch to the auxiliary machines which are linked to the underlying performance, to reduce the number of in-process stock. Selection of basic and auxiliary machines is provided that candidates and excludes important indicators. If in the process of selecting the logging machine does not meet the screening criteria for excluding indicators then it does not participate in the selection. Significant index can be neglected in case of discrepancy of candidates to stated requirements. The performance of the model was tested on the example of harvesting sites of the enterprises of the Krasnoyarsk region in spring 2016. In the course of the experiment the system of forest machines, meeting the required selection criteria, was obtained.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

DOMEX 550MC

Alloy Digest ◽  
2009 ◽  
Vol 58 (3) ◽  
Keyword(s):  
Physical Properties ◽  
Hsla Steel ◽  
Steel Structures ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Cold Forming ◽  
Wide Range ◽  
Hot Rolled ◽  
Earthmoving Machines

Abstract Domex 550MC is a hot-rolled, high-strength low-alloy (HSLA) steel for cold forming operations. It is available in thicknesses of 2.00-12.80 mm. The alloy meets or exceeds the requirements of S550MC in EN 10149-2. Applications include a wide range of fabricated components and steel structures, including truck chassis, crane booms, and earthmoving machines. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fatigue. It also includes information on forming, heat treating, and joining. Filing Code: SA-594. Producer or source: SSAB Swedish Steel Inc.

THE VALUE OF LOVE IN THE SYSTEM OF FORMATION OF THE PROFESSIONAL MATURITY OF THE EDUCATOR

2020 ◽  
Vol 1 (10(79)) ◽  
pp. 12-18
Author(s):  
G. Bubyreva
Keyword(s):  
Russian Federation ◽  
The State ◽  
Educational Process ◽  
Wide Range ◽  
The Family ◽  
The Russian Federation ◽  
The Government ◽  
The Individual ◽  
The Right

The existing legislation determines the education as "an integral and focused process of teaching and upbringing, which represents a socially important value and shall be implemented so as to meet the interests of the individual, the family, the society and the state". However, even in this part, the meaning of the notion ‘socially significant benefit is not specified and allows for a wide range of interpretation [2]. Yet the more inconcrete is the answer to the question – "who and how should determine the interests of the individual, the family and even the state?" The national doctrine of education in the Russian Federation, which determined the goals of teaching and upbringing, the ways to attain them by means of the state policy regulating the field of education, the target achievements of the development of the educational system for the period up to 2025, approved by the Decree of the Government of the Russian Federation of October 4, 2000 #751, was abrogated by the Decree of the Government of the Russian Federation of March 29, 2014 #245 [7]. The new doctrine has not been developed so far. The RAE Academician A.B. Khutorsky believes that the absence of the national doctrine of education presents a threat to national security and a violation of the right of citizens to quality education. Accordingly, the teacher has to solve the problem of achieving the harmony of interests of the individual, the family, the society and the government on their own, which, however, judging by the officially published results, is the task that exceeds the abilities of the participants of the educational process.  The particular concern about the results of the patriotic upbringing served as a basis for the legislative initiative of the RF President V. V. Putin, who introduced the project of an amendment to the Law of RF "About Education of the Russian Federation" to the State Duma in 2020, regarding the quality of patriotic upbringing [3]. Patriotism, considered by the President of RF V. V. Putin as the only possible idea to unite the nation is "THE FEELING OF LOVE OF THE MOTHERLAND" and the readiness for every sacrifice and heroic deed for the sake of the interests of your Motherland. However, the practicing educators experience shortfalls in efficient methodologies of patriotic upbringing, which should let them bring up citizens, loving their Motherland more than themselves. The article is dedicated to solution to this problem based on the Value-sense paradigm of upbringing educational dynasty of the Kurbatovs [15].

Pengaruh Persepsi Kegunaan, Persepsi Kemudahan, Kecepatan, Keamanan 75 dan Kerahasiaan Serta Kesiapan Teknologi Informasi Wajib Pajak terhadap Penggunaan e-Filing Bagi Wajib Pajak Orang Pribadi Di Kota Tangerang, Kecamatan Karawaci

2016 ◽  
Vol 8 (1) ◽  
pp. 75-91 ◽  
Author(s):  
Shelby Devina ◽  
Waluyo Waluyo
Keyword(s):  
Ease Of Use ◽  
Perceived Usefulness ◽  
Security And Privacy ◽  
Primary Data ◽  
Perceived Ease Of Use ◽  
Analysis Technique ◽  
Convenience Sampling ◽  
The Individual ◽  
Tax Payers ◽  
Selection Of

The objective of this research was to examine the effect of perceived usefulness, perceived ease of use, speed, security and privacy and readiness technology tax payers information to e-Filing usage. The object of this study is the individual tax payers in Tangerang City, Karawaci District. The selection of the sample is determined based on convenience sampling method. Data used in this study was primary data, id est: questionnaires. The respondent in this study were 110. Data analysis technique in this study using multiple linear regression. The result of this study were (1) perceived usefulness have a significant impact towards e-Filing usage; (2) perceived ease of use have a significant impact towards e-Filing usage; (3) speed does not have a significant impact towards e-Filing usage; (4) security and privacy does not have a significant impact towards e-Filing usage; (5) readiness technology tax payers information does not have a significant impact towards e-Filing usage; (6) perceived usefulness, perceived ease of use, speed, security and privacy and readiness technology tax payers information all simultaneously, have a significant impact towards e-Filing usage. Keywords: e-Filing usage, perceived usefulness, perceived ease of use, readiness technology tax payers information, security and privacy.

Synthesis, Characterization and Antiproliferative Activity Assessment of a Novel 1H-5-mercapto-1,2,4 Triazole Derivative

2017 ◽  
Vol 68 (4) ◽  
pp. 745-747 ◽  
Author(s):  
Marius Mioc ◽  
Sorin Avram ◽  
Vasile Bercean ◽  
Mihaela Balan Porcarasu ◽  
Codruta Soica ◽  
...  
Keyword(s):  
Antiproliferative Activity ◽  
Biological Activities ◽  
Cancer Cell Line ◽  
Vascular Endothelial ◽  
Triazole Derivative ◽  
Activity Assessment ◽  
Wide Range ◽  
Specific Receptors ◽  
Endothelial Growth Factor ◽  
Selection Of

Angiogenesis plays an important function in tumor proliferation, one of the main angiogenic promoters being the vascular endothelial growth factor (VEGF) which activates specific receptors, particularly VEGFR-2. Thus, VEGFR-2 has become an essential therapeutic target in the development of new antitumor drugs. 1,2,4-triazoles show a wide range of biological activities, including antitumor effect, which was documented by numerous reports. In the current study the selection of 5-mercapto-1,2,4-triazole structure (1H-3-styryl-5-benzylidenehydrazino-carbonyl-methylsulfanil-1,2,4-triazole, Tz3a.7) was conducted based on molecular docking that emphasized it as suitable ligand for VEGFR-2 and EGFR1 receptors. Compound Tz3a.7 was synthesized and physicochemically and biologically evaluated thus revealing a moderate antiproliferative activity against breast cancer cell line MDA-MB-231.

PROBLEM ASPECTS OF THE IMPLEMENTATION OF CRIMINAL PROCEDURAL NORMS OF PROTECTION OF THE VICTIMS FROM CRIME

2020 ◽  
pp. 72-76
Author(s):  
Яна Валерьевна Самиулина
Keyword(s):  
Preventive Measure ◽  
Criminal Procedure ◽  
Legal Rights ◽  
Criminal Proceedings ◽  
Effective Mechanism ◽  
The Russian Federation ◽  
The Individual ◽  
The Right ◽  
To Receive ◽  
Selection Of

В настоящей статье предпринята попытка исследовать отдельные проблемные аспекты института потерпевшего в российском уголовном процессе. В этих целях подвергнуты анализу правовые нормы, регламентирующие его процессуальный статус. Раскрываются отдельные пробелы уголовно-процессуального законодательства в сфере защиты законных прав и интересов потерпевшего. Автор акцентирует внимание на том, что совершенствование уголовно-процессуального законодательства в части расширения правомочий потерпевшего по отстаиванию своих нарушенных преступлением прав следует продолжить. На основании проведенного исследования действующего законодательства в части регламентации прав потерпевшего от преступления предлагается расширить перечень получаемых им копий постановлений, указанных в п. 13 ч. 2 ст. 42 УПК РФ. Автор предлагает включить в перечень указанной законодательной нормы право получения потерпевшим копии постановления об избрании конкретного вида меры пресечения, избранного в отношении подозреваемого (обвиняемого). Для создания действенного механизма защиты интересов потерпевших от преступления юридических лиц предлагаем ч. 9 ст. 42 УПК РФ изложить в следующей редакции: «в случае признания потерпевшим юридического лица его процессуальное право в уголовном процессе осуществляет представляющий его профессиональный адвокат». This article attempts to investigate certain problematic aspects of the institution of the victim in the Russian criminal process. For this purpose, analyzed the individual norms governing his procedural status. Separate gaps of the criminal procedure legislation in the sphere of protection of the legal rights and interests of the victim are disclosed. The author emphasizes that the improvement of the criminal procedure legislation in terms of the extension of the victim’s authority to defend his rights violated by the crime should be continued. On the basis of the study of the current legislation regarding the regulation of the rights of the victim of a crime, it is proposed to expand the list of decisions received by him, referred to in paragraph 13, part 2 of article 42 Code of Criminal Procedure. The author proposes to include in the list of the indicated legislative norm the right to receive the victim a copy of the decision on the selection of a specific type of preventive measure, selected in relation to the suspect (accused). To create an effective mechanism for protecting the interests of legal entities victims of a crime, we offer part 9 of art. 42 of the Code of Criminal Procedure of the Russian Federation shall be reworded as follows: «if a legal entity is recognized as a victim, his procedural right in criminal proceedings is exercised by the professional lawyer representing him».

SAMUEL J. BROADS CONTRIBUTIONS TO THE ACCOUNTING PROFESSION

1996 ◽  
Vol 23 (2) ◽  
pp. 69-85 ◽  
Author(s):  
Gary John Previts ◽  
Thomas R. Robinson
Keyword(s):  
Self Regulation ◽  
Accounting Profession ◽  
General Acceptance ◽  
Accounting Principles ◽  
The Individual ◽  
Securities Laws ◽  
Analogous Reasoning ◽  
Independent Audit ◽  
Selection Of

In the decade following the passage of the Federal Securities Laws of 1933 and 1934, the reform of accounting and auditing practices directed authority for selection of accounting principles and auditing procedures away from the discretion of the individual accountant and auditor. Instead, a self-regulatory peer driven process to establish general acceptance for a more limited set of principles and procedures was being initiated. Two events which occurred in 1938 indelibly affected this process, the SEC's decision to issue Accounting Series Release No. 4, which empowered non-governmental entities as potential sources of authoritative support, and the McKesson & Robbins fraud which called into question the value of the independent audit and the role of external auditing at the very time a momentum had been established for self-regulation by the nascent and recently reunified accounting profession. The contributions of Samuel J. Broad in both the initiatives for self-regulation of accounting principles and of auditing procedures is examined in this paper. Further, several examples of Broad's rhetorical technique of employing analogous reasoning to facilitate dissemination of complex economic and accounting issues are examined.

Application of the turbidity ratio method in the spherical particle size determination in the range m ∈ and α ∈

1979 ◽  
Vol 44 (7) ◽  
pp. 2064-2078 ◽  
Author(s):  
Blahoslav Sedláček ◽  
Břetislav Verner ◽  
Miroslav Bárta ◽  
Karel Zimmermann
Keyword(s):  
Refractive Index ◽  
Spherical Particle ◽  
Ratio Method ◽  
Refractive Indices ◽  
Relative Refractive Index ◽  
Particle Size Determination ◽  
The Individual ◽  
The Given ◽  
Turbidity Ratio ◽  
Selection Of

Basic scattering functions were used in a novel calculation of the turbidity ratios for particles having the relative refractive index m = 1.001, 1.005 (0.005) 1.315 and the size α = 0.05 (0.05) 6.00 (0.10) 15.00 (0.50) 70.00 (1.00) 100, where α = πL/λ, L is the diameter of the spherical particle, λ = Λ/μ1 is the wavelength of light in a medium with the refractive index μ1 and Λ is the wavelength of light in vacuo. The data are tabulated for the wavelength λ = 546.1/μw = 409.357 nm, where μw is the refractive index of water. A procedure has been suggested how to extend the applicability of Tables to various refractive indices of the medium and to various turbidity ratios τa/τb obtained with the individual pairs of wavelengths λa and λb. The selection of these pairs is bound to the sequence condition λa = λ0χa and λb = λ0χb, in which b-a = δ = 1, 2, 3; a = -2, -1, 0, 1, 2, ..., b = a + δ = -1, 0, 1, 2, ...; λ0 = λa=0 = 326.675 nm; χ = 546.1 : 435.8 = 1.2531 is the quotient of the given sequence.

Sign in / Sign up

Export Citation Format

Share Document