scholarly journals Numerical investigation of radiation ablation and acceleration of high-density carbon foils

2020 ◽  
Vol 38 (4) ◽  
pp. 239-243
Author(s):  
Peng Chen ◽  
Ronghao Hu ◽  
Hao Zhou ◽  
Zhihao Tao ◽  
Guilong Gao ◽  
...  
Keyword(s):  
Numerical Investigation ◽  
Scaling Law ◽  
High Density ◽  
Time Dependent ◽  
Radiation Hydrodynamics ◽  
Acceleration Process ◽  
X Ray ◽  
Simulation Results ◽  
Carbon Foils

AbstractThe ablation and acceleration of diamond-like high-density carbon foils irradiated by thermal X-ray radiations are investigated with radiation hydrodynamics simulations. The time-dependent front of the ablation wave is given numerically for radiation temperatures in the range of 100–300 eV. The mass ablation rates and ablation pressures can be derived or implied from the coordinates of ablation fronts, which agree well with reported experiment results of high-density carbon with radiation temperatures Trad in the range of 160–260 eV. It is also found that the $T_{{\rm rad}}^3$ scaling law for ablation rates does not apply to Trad above 260 eV. The trajectories of targets and hydrodynamic efficiencies for different target thicknesses can be derived from the coordinates of ablation fronts using a rocket model and the results agree well with simulations. The peak hydrodynamic efficiencies of the acceleration process are investigated for different foil thicknesses and radiation temperatures. Higher radiation temperatures and target thicknesses result in higher hydrodynamic efficiencies. The simulation results are useful for the design of fusion capsules.

X-Ray Replication of Submicrometer Linewidth Patterns

1977 ◽  
Vol 35 ◽  
pp. 136-137
Author(s):  
Henry I. Smith ◽  
D.C. Flanders
Keyword(s):  
Electron Beam Lithography ◽  
Cross Sectional ◽  
X Ray ◽  
Electron Backscattering ◽  
Spatial Frequencies ◽  
Cross Sectional Profile ◽  
Carbon Foils ◽  
Sectional Profile ◽  
And Control ◽  
Soft Radiation

Scanning electron beam lithography has been used for a number of years to write submicrometer linewidth patterns in radiation sensitive films (resist films) on substrates. On semi-infinite substrates, electron backscattering severely limits the exposure latitude and control of cross-sectional profile for patterns having fundamental spatial frequencies below about 4000 Å(l),Recently, STEM'S have been used to write patterns with linewidths below 100 Å. To avoid the detrimental effects of electron backscattering however, the substrates had to be carbon foils about 100 Å thick (2,3). X-ray lithography using the very soft radiation in the range 10 - 50 Å avoids the problem of backscattering and thus permits one to replicate on semi-infinite substrates patterns with linewidths of the order of 1000 Å and less, and in addition provides means for controlling cross-sectional profiles. X-radiation in the range 4-10 Å on the other hand is appropriate for replicating patterns in the linewidth range above about 3000 Å, and thus is most appropriate for microelectronic applications (4 - 6).

Composition and Surface Topography Effects on Apatite-Forming Ability of Ceramic-Polymer Composites

2003 ◽  
Vol 774 ◽  
Author(s):  
Susan M. Rea ◽  
Serena M. Best ◽  
William Bonfield
Keyword(s):  
Surface Topography ◽  
High Density Polyethylene ◽  
High Density ◽  
Apatite Layer ◽  
Biologically Active ◽  
Human Blood Plasma ◽  
Apatite Formation ◽  
Polyethylene Matrix ◽  
Composite Surface ◽  
X Ray

AbstractHAPEXTM (40 vol% hydroxyapatite in a high-density polyethylene matrix) and AWPEX (40 vol% apatite-wollastonite glass ceramic in a high density polyethylene matrix) are composites designed to provide bioactivity and to match the mechanical properties of human cortical bone. HAPEXTM has had clinical success in middle ear and orbital implants, and there is great potential for further orthopaedic applications of these materials. However, more detailed in vitro investigations must be performed to better understand the biological interactions of the composites and so the bioactivity of each material was assessed in this study. Specifically, the effects of controlled surface topography and ceramic filler composition on apatite layer formation in acellular simulated body fluid (SBF) with ion concentration similar to those of human blood plasma were examined. Samples were prepared as 1 cm × 1 cm × 1 mm tiles with polished, roughened, or parallel-grooved surface finishes, and were incubated in 20 ml of SBF at 36.5 °C for 1, 3, 7, or 14 days. The formation of a biologically active apatite layer on the composite surface after immersion was demonstrated by thin-film x-ray diffraction (TF-XRD), environmental scanning electron microscopy (ESEM) imaging and energy dispersive x-ray (EDX) analysis. Variations in sample weight and solution pH over the period of incubation were also recorded. Significant differences were found between the two materials tested, with greater bioactivity in AWPEX than HAPEXTM overall. Results also indicate that within each material the surface topography is highly important, with rougher samples correlated to earlier apatite formation.

scholarly journals On the pinning force in high density MgB2 samples

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
V. Sandu ◽  
A. M. Ionescu ◽  
G. Aldica ◽  
M. A. Grigoroscuta ◽  
M. Burdusel ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Field Dependence ◽  
Scaling Law ◽  
Critical Force ◽  
High Density ◽  
Pinning Force ◽  
Pinning Mechanism ◽  
Grain Boundary Pinning ◽  
Peaked Function ◽  
Main Factor

AbstractAn analysis of the field dependence of the pinning force in different, high density sintered samples of MgB2 is presented. The samples were chosen to be representative for pure MgB2, MgB2 with additives, and partially oriented massive samples. In some cases, the curves of pinning force versus magnetic field of the selected samples present peculiar profiles and application of the typical scaling procedures fails. Based on the percolation model, we show that most features of the field dependence of the critical force that generate dissipation comply with the Dew-Hughes scaling law predictions within the grain boundary pinning mechanism if a connecting factor related to the superconducting connection of the grains is used. The field dependence of the connecting function, which is dependent on the superconducting anisotropy, is the main factor that controls the boundary between dissipative and non-dissipative current transport in high magnetic field. Experimental data indicate that the connecting function is also dependent on the particular properties (e.g., the presence of slightly non-stoichiometric phases, defects, homogeneity, and others) of each sample and it has the form of a single or double peaked function in all investigated samples.

scholarly journals Time‐dependent properties of graphene nanoplatelets reinforced high‐density polyethylene

2021 ◽  
pp. 50783
Author(s):  
Zainab Al‐Maqdasi ◽  
Liva Pupure ◽  
Guan Gong ◽  
Nazanin Emami ◽  
Roberts Joffe
Keyword(s):  
High Density Polyethylene ◽  
Graphene Nanoplatelets ◽  
High Density ◽  
Time Dependent

scholarly journals Enhanced Water Resistance of Recycled Newspaper/High Density Polyethylene Composite Laminates via Hydrophobic Modification of Newspaper Laminas

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 421
Author(s):  
Binwei Zheng ◽  
Weiwei Zhang ◽  
Litao Guan ◽  
Jin Gu ◽  
Dengyun Tu ◽  
...  
Keyword(s):  
Stearic Acid ◽  
Photoelectron Spectroscopy ◽  
Composite Laminates ◽  
High Density Polyethylene ◽  
Water Resistance ◽  
Laminated Composite ◽  
High Strength ◽  
High Water ◽  
High Density ◽  
X Ray

A high strength recycled newspaper (NP)/high density polyethylene (HDPE) laminated composite was developed using NP laminas as reinforcement and HDPE film as matrix. Herein, NP fiber was modified with stearic acid (SA) to enhance the water resistance of the NP laminas and NP/HDPE composite. The effects of heat treatment and SA concentration on the water resistance and tensile property of NP and composite samples were investigated. The chemical structure of the NP was characterized with X-ray diffractometer, X-ray photoelectron spectroscopy and attenuated total reflectance Fourier transform infrared spectra techniques. The surface and microstructure of the NP sheets were observed by scanning electron microscopy. An expected high-water resistance of NP sheets was achieved due to a chemical bonding that low surface energy SA were grafted onto the modified NP fibers. Results showed that the hydrophobicity of NP increased with increasing the stearic acid concentration. The water resistance of the composite laminates was depended on the hydrophobicity of the NP sheets. The lowest value of 2 h water absorption rate (3.3% ± 0.3%) and thickness swelling rate (2.2% ± 0.4%) of composite were obtained when the SA concentration was 0.15 M. In addition, the introduction of SA can not only enhance the water resistance of the composite laminates, but also reduce the loss of tensile strength in wet conditions, which shows potential in outdoor applications.

scholarly journals Monte Carlo Modeling and Design of Photon Energy Attenuation Layers for >10× Quantum Yield Enhancement in Si-Based Hard X-ray Detectors

Instruments ◽  
2021 ◽  
Vol 5 (2) ◽  
pp. 17
Author(s):  
Eldred Lee ◽  
Kaitlin M. Anagnost ◽  
Zhehui Wang ◽  
Michael R. James ◽  
Eric R. Fossum ◽  
...  
Keyword(s):  
Monte Carlo Simulation ◽  
Monte Carlo ◽  
Quantum Yield ◽  
Photon Energy ◽  
High Efficiency ◽  
High Energy ◽  
Yield Enhancement ◽  
X Ray ◽  
Simulation Results ◽  
Conversion Efficiencies

High-energy (>20 keV) X-ray photon detection at high quantum yield, high spatial resolution, and short response time has long been an important area of study in physics. Scintillation is a prevalent method but limited in various ways. Directly detecting high-energy X-ray photons has been a challenge to this day, mainly due to low photon-to-photoelectron conversion efficiencies. Commercially available state-of-the-art Si direct detection products such as the Si charge-coupled device (CCD) are inefficient for >10 keV photons. Here, we present Monte Carlo simulation results and analyses to introduce a highly effective yet simple high-energy X-ray detection concept with significantly enhanced photon-to-electron conversion efficiencies composed of two layers: a top high-Z photon energy attenuation layer (PAL) and a bottom Si detector. We use the principle of photon energy down conversion, where high-energy X-ray photon energies are attenuated down to ≤10 keV via inelastic scattering suitable for efficient photoelectric absorption by Si. Our Monte Carlo simulation results demonstrate that a 10–30× increase in quantum yield can be achieved using PbTe PAL on Si, potentially advancing high-resolution, high-efficiency X-ray detection using PAL-enhanced Si CMOS image sensors.

scholarly journals Stellar Flares: Observations and Theory

1989 ◽  
Vol 104 (2) ◽  
pp. 49-52
Author(s):  
Suzanne L. Hawley
Keyword(s):  
Scaling Law ◽  
Dynamic Scaling ◽  
X Ray ◽  
Temperature Distributions ◽  
Photometric And Spectroscopic Observations ◽  
Stellar Flares ◽  
Consistent Model ◽  
Self Consistent ◽  
Flare Model ◽  
Large Flare

AbstractPhotometric and spectroscopic observations of a very large flare on AD Leo are presented. A self consistent model of a flare corona, transition region and chromosphere is developed; in particular the chromospheric temperature distributions resulting from X-ray and EUV irradiation by coronae of various temperatures are determined. The predicted line fluxes in Hγ are compared to the observed line fluxes to find the coronal temperature as a function of time during the flare. This run of temperature with time is then compared with the predictions of an independent theoretical flare model based on a dynamic scaling law (see paper by Fisher and Hawley, these proceedings).

The study of time dependent, broadband X-ray emission from ultra-short pulse laser produced plasmas

1994 ◽  
Author(s):  
Ronnie Shepherd ◽  
Rex Booth ◽  
Dwight Price ◽  
Rosemary Walling ◽  
Richard More ◽  
...  
Keyword(s):  
Pulse Laser ◽  
Short Pulse ◽  
Time Dependent ◽  
X Ray ◽  
Short Pulse Laser ◽  
Ultra Short Pulse ◽  
Ultra Short Pulse Laser

Improvement of the Properties of Polyethylene with Chlorinated Polyethylene (CPE)

2003 ◽  
Vol 11 (2) ◽  
pp. 115-122
Author(s):  
Kálmán Marossy ◽  
Pál Bárczy
Keyword(s):  
High Density Polyethylene ◽  
Industrial Applications ◽  
Mechanical Tests ◽  
High Density ◽  
Structural Units ◽  
Chlorinated Polyethylene ◽  
X Ray ◽  
Dynamic Mechanical ◽  
X Ray Scattering ◽  
Multiphase Systems

Blends of high density polyethylene (HDPE) and chlorinated polyethylene (CPE) have been tested across the whole concentration range. Polyethylene is used to modify the properties of CPE in the elastomer industry, but modification of the properties of polyethylene with CPE is still not usual. Conventional mechanical tests and dynamic mechanical tests were carried out. The blends were found to be multiphase systems of excellent technological compatibility. Between 10 and 15% by weight CPE increased the modulus of polyethylene. X-ray scattering studies showed that the blends contained structural units not present either in the polyethylene or in the CPE. The blends were melt processable and may have industrial applications, too.

Sign in / Sign up

Export Citation Format

Share Document