Large temperature drop across the Eocene–Oligocene transition in central North America

Nature ◽  
2007 ◽  
Vol 445 (7128) ◽  
pp. 639-642 ◽  
Author(s):  
Alessandro Zanazzi ◽  
Matthew J. Kohn ◽  
Bruce J. MacFadden ◽  
Dennis O. Terry
2019 ◽  
Author(s):  
Katherine Mitchell ◽  
Hunter Horner ◽  
Alex Resnick ◽  
Jungkyu Park ◽  
Eduardo B. Farfán ◽  
...  

Abstract Understanding the effect of fission gas generation on thermal resistance in various nuclear fuels is critical for managing fuel performance. Fission gas in the fuels degrades its thermal properties by altering the lattice vibrations. It results in thermal expansion that increases the thermal resistance and decreases the structural stability of the fuels. In this research, thermal transport in uranium dioxide is studied at a microscopic level when Xe and Kr gasses interact with uranium and oxygen atoms. Reverse non-equilibrium molecular dynamics (RNEMD) is used to calculate the thermal resistances and provide an understanding about the effect of the fission gas release on phonon transport. The results show that the thermal conductivity of uranium dioxide is decreased nearly by 78% by the presence of only one fission gas bubble. The thermal transport in uranium dioxide is shown to become highly diffusive by a single fission gas bubble and a large temperature drop in temperature profiles are observed in all simulation structures with fission gas bubbles. The average interfacial thermal resistance across a fission gas bubble is estimated to be 2.1 × 10−9 Km2/W.


2020 ◽  
Author(s):  
Guilherme F. Camarinha-Neto ◽  
Julia C. P. Cohen ◽  
Cléo Q. Dias-Júnior ◽  
Matthias Sörgel ◽  
José Henrique Cattanio ◽  
...  

Abstract. In the period between July 9th and 11th, 2014 a Friagem event reached the central Amazon region causing significant changes in microclimate and atmospheric chemistry. On July 11th, the southwest flow related to the Friagem converged with the easterly winds in the central Amazon region. The interaction between these two distinct air masses formed a convection band, which intensified over the Manaus region and the Amazon Tall Tower Observatory (ATTO) site. The satellite images show the evolution of convective activity on July 11th, which lead to 21 mm of precipitation in the ATTO site. Moreover, the arrival of the Friagem caused a sudden drop in temperature and a predominance of southerly winds, which could be seen in Porto Velho between July 7th and 8th and in Manaus and ATTO site from July 9th to 11th. The results of ERA reanalysis and Brazilian developments on the Regional Atmospheric Modeling System (BRAMS) simulations show that this Friagem event coming from the southwest, carries a mass of air with higher O3 and NO2 mixing ratios and lower CO mixing ratio compared to the air masses present at the central Amazon. At lake Balbina the Friagem intensifies the local circulations, such as the breeze phenomena. At the Manaus region and ATTO site, the main effects of the Friagem event are: a decrease in the incoming solar radiation (due to intense cloud formation), a large temperature drop and a distinct change in surface O3 and CO2 mixing ratios. As the cold air of the Friagem was just in the lower 500 m the most probable cause of this change is that a cold pool above the forest prevented vertical mixing causing accumulation of CO2 from respiration and very low O3 mixing ratio due to photochemistry reduction and limited mixing within the boundary layer.


Author(s):  
Michael Thompson Pettes ◽  
Li Shi

Using a silicon nitride cantilever with an integral Si tip and a micro-fabricated Pt-C resistance thermometer placed close to the tip, we have measured the thermal contact resistance of a nanoscale Si point contact in an ultrahigh vacuum atomic force microscope at near room temperature. The temperature of the cantilever tip was observed to remain constant during approach to, while in contact with, and during retraction from the Si substrate, while a large temperature drop was observed at the points of contact and separation, suggesting negligible near-field radiation transport in the experiment reported here. Detailed contact mechanics calculations of the contact diameter and modeling of the nanocontact show that solid-solid conduction with phonon transmission coefficient of at least 0.12 is the dominant mode of heat transfer through the nanoscale contact.


2005 ◽  
Vol 492-493 ◽  
pp. 151-156 ◽  
Author(s):  
Hitoshi Kohri ◽  
Ichiro Shiota

Every thermoelectric material shows high performance at a specific narrow temperature range. The temperature range with high performance can be expanded by joining the materials with different peak temperature. This is the concept of a functionally graded material (FGM) for thermoelectric materials. Bismuth telluride is the best material for cooling devices at around room temperature. Then we investigated the thermoelectric cooling properties for bismuth telluride with two step graded structure. FGM samples were fabricated by three methods. The first FGM was synthesized by in situ method. The second one was fabricated by joining in a hot-press equipment. The last one was composed by joining with solder. Thermoelectric cooling properties were evaluated by observing the maximum temperature drop to electric current when the high temperature side was kept constant. The large temperature difference was obtained when the proper configuration of thermoelectric materials along the temperature gradient were performed. The coincidence of optimum electrical currents of composing materials is also essential to obtain the high cooling performance.


2016 ◽  
Vol 20 (6) ◽  
pp. 2101-2112 ◽  
Author(s):  
Djordje Vukovic ◽  
Dijana Damljanovic

During a supersonic run of a blowdown wind tunnel, temperature of air in the test section drops which can affect planned measurements. Adverse thermal effects include variations of the Mach and Reynolds numbers, variation of airspeed, condensation of moisture on the model, change of characteristics of the instrumentation in the model, et cetera. Available data on thermal effects on instrumentation are pertaining primarily to long-run-duration wind tunnel facilities. In order to characterize such influences on instrumentation in the models, in short-run-duration blowdown wind tunnels, temperature measurements were made in the wing-panel-balance and main-balance spaces of two wind tunnel models tested in the T-38 wind tunnel. The measurements showed that model-interior temperature in a run increased at the beginning of the run, followed by a slower drop and, at the end of the run, by a large temperature drop. Panel-force balance was affected much more than the main balance. Ways of reducing the unwelcome thermal effects by instrumentation design and test planning are discussed.


Sensors ◽  
2021 ◽  
Vol 21 (18) ◽  
pp. 6031
Author(s):  
Robert Bayer ◽  
Jiří Maxa ◽  
Pavla Šabacká

In this paper, we describe the possibility of using the energy of a compressed air flow, where cryogenic temperatures are achieved within the flow behind the nozzle, when reaching a critical flow in order to maximize the energy gained. Compared to the energy of compressed air, the energy obtained thermoelectrically is negligible, but not zero. We are therefore primarily aiming to maximize the use of available energy sources. Behind the aperture separating regions with a pressure difference of several atmospheres, a supersonic flow with a large temperature drop develops. Based on the Seebeck effect, a thermocouple is placed in these low temperatures to create a thermoelectric voltage. This paper contains a mathematical-physical analysis for proper nozzle design, controlled gas expansion and ideal placement of a thermocouple within the flow for best utilization of the low temperature before a shockwave formation. If the gas flow passes through a perpendicular shockwave, the velocity drops sharply and the gas pressure rises, thereby increasing the temperature. In contrast, with a conical shockwave, such dramatic changes do not occur and the cooling effect is not impaired. This article also contains analyses for proper forming of the head shape of the thermocouple to avoid the formation of a detached shockwave, which causes temperature stagnation resulting in lower thermocouple cooling efficiency.


2021 ◽  
Author(s):  
Xiaofu Zhou ◽  
Kun Cao ◽  
Ziyao Zhang ◽  
Yun Tan ◽  
Hang Fan ◽  
...  

Abstract Background: Cold stress is one of the important factors that restrict plant growth and regional distribution. Under cold acclimation conditions, plants growing in temperate zones reprogram the gene expression in the cells, making the plants better cope with the coming cold stress. However, under natural environmental conditions, the climate is complex and changeable. The sudden large temperature drop will bring serious disasters to plants. Rhododendron aureum Georgi, as an evergreen plant growing in high altitude areas of Changbai Mountain, the harsh ecological environment may endow it with different cold tolerance characteristics. Results: In this study, the proteomic difference between samples under control and cold stress were compared pairwise. A total of 360 DAPs were identified, of which 175 were down-regulated and 185 were up-regulated when comparing these two sets of data. The high cold tolerance of Rhododendron plants can be attributed to: accumulation of chaperone proteins; the up-regulation of components related to translation; enhancement of catabolism and reduction in anabolism, provide energy for plants and fight against cold stress; enhanced cellular antioxidant capacity; modification of components in cell wall, membrane, and cytoskeleton. Conclusion: These results provide an in-depth understanding of the cold tolerance mechanism of Rhododendron. The identified genes and metabolic pathways provide a certain reference for the genetic improvement of plant cold tolerance.


2020 ◽  
Author(s):  
Xu Wang ◽  
Jian Cheng ◽  
Li Ling ◽  
Hong Su ◽  
Desheng Zhao ◽  
...  

Abstract Background: Many studies have shown an association of childhood respiratory diseases with short-term temperature variability such as diurnal temperature range (DTR) and temperature change between two neighboring days (TCN). However, the impact of temperature variability on allergic rhinitis (AR) has not been investigated so far. This study sought to evaluate the short-term effect of temperature variability (i.e., TCN and DTR) on AR, as well as to identify vulnerable subpopulations. Method: We collected daily data on emergency room visits and outpatients for AR and weather variables in Hefei, China during 2014-2016. A distributed lag non-linear model that controlled for long-term trend and seasonality, mean temperature, relative humidity, day of week was used to fit the associations of AR with DTR and TCN. Stratified analyses by age, sex and occupation were also performed. Results: During the study period, there were a total of 53538 cases and the average values of DTR and TCN were 8.4°C (range: 1.0°C to 21.2°C) and 0°C (range: -12.2°C to 5.9°C), respectively. While we did not observe an adverse effect of DTR on AR, TCN was significantly associated with increased risk of AR. Specifically, a large temperature drop between two adjacent days (3.8°C, 5th percentile of TCN) has a delayed and short-lasting effect on AR, with the estimated relative risk of 1.02 (95% confidence interval: 1.01 to 1.04) at lag 12. Moreover, boys and children older than 15 years seemed to be more vulnerable to the effect of TCN. Conclusions : This study provided evidence of an adverse effect of large temperature drops between two adjacent days on childhood AR. Attention paid to boys and older children may help prevent AR attacks.


2001 ◽  
Author(s):  
L. Shi ◽  
P. Kim ◽  
S. Plyasunov ◽  
A. Bachtold ◽  
P. L. McEuen ◽  
...  

Abstract The temperature distribution of current-carrying carbon nanotubes (CNs) have been measured by scanning thermal microscopy. The thermal imaging results support that multiwall (MW) CNs and semiconducting single wall (SW) CNs are diffusive and dissipative, while metallic SWCNs change from non dissipative at low electric fields to dissipative at high fields due to optical phonon emission. The temperature rise in a 4.5 μm long MWCN was of order 40 K for a power input of 22 μW and increased linearly with power input. There existed a large temperature drop at the tube-substrate interface due to a weak contact thermal conductance about 0.1 W/m-K. For the MWCN, comparable amount of Joule heat was lost from the tube bulk to the substrate and from the tube to the metal contacts.


2013 ◽  
Vol 785-786 ◽  
pp. 31-37 ◽  
Author(s):  
Jin Dong Zhou ◽  
Xue Gong Bi ◽  
Fu Yang

The difficult problems in dephosphorization pretreatment of the high phosphorous hot metal are extremely high flux consumption and very large temperature drop. Dephosphorization with multi phase flux would be helpful to solve these difficulties. In this paper, 2CaO·SiO2 was used as the solid phase and the effect of slag composition and solid/slag mass ratio on dephosphorization efficiency of the high phosphorus hot metal was investigated in the laboratory. Dephosphorization capacity of nine multi phase fluxes was determined by means of equilibrium experiment and it is revealed that dephosphorization capacity of the multi phase fluxes is controlled by the slag composition when solid/slag mass ratio is within 0.30; as solid/slag mass ratio exceeds 0.30, dephosphorization capacity of the multi phase fluxes increases with increasing the ratio. Pretreatment experiments of Fe-0.5%P-0.15%Si-4.5%C were conducted with multi phase flux at 1400 °C (1673.15 K). The test results show that replacement of slag with 2CaO.SiO2 particles on mass ratio of 50:50 brings about smaller finale [%P], suggesting dephosphorization of the high phosphorus hot metal with multi phase flux is beneficial to the reduction of flux consumption. Moreover, the experimentally determined equilibrium MgO concentration in the multi phase fluxes decreases with increasing solid/slag mass ratio when the ratio exceeds 0.30, implying dephosphorization with multi phase fluxes of higher solid/slag mass ratios is beneficial to the control of reactor linings corrosion.


Sign in / Sign up

Export Citation Format

Share Document