scholarly journals Low limit of detection of the AlGaN/GaN-based sensor by the Kelvin connection detection technique

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Hanyuan Zhang ◽  
Ying Gan ◽  
Shu Yang ◽  
Kuang Sheng ◽  
Ping Wang
Keyword(s):  
Background Noise ◽  
Magnetic Beads ◽  
Limit Of Detection ◽  
Point Of Care ◽  
Low Cost ◽  
Detection Technique ◽  
Operating Point ◽  
Detection Experiment ◽  
Au Electrode ◽  
Electrode Sensor

AbstractThe AlGaN/GaN-based sensor is a promising POCT (point-of-care-testing) device featuring miniaturization, low cost, and high sensitivity. BNP is an effective protein biomarker for the early diagnosis of HF (heart failure). In this work, a novel AlGaN/GaN device with the Kelvin connection structure and the corresponding detection technique was proposed. This technique can effectively suppress the background noise and improve the SNR (signal-to-noise ratio). A BNP detection experiment was carried out to verify the effectiveness of this technique. It is shown that compared with that of the traditional detection method, the LOD (limit of detection) was improved from 0.47 ng/mL to 1.29 pg/mL. The BNP detection experiment was also carried out with a traditional electrochemical Au-electrode sensor with the same surface functionalization steps. The AlGaN/GaN sensor showed a better LOD than the Au-electrode sensor. Moreover, the influence of AlGaN/GaN sensor package on background noise was investigated with the mechanism of the noise source revealed. Finally, based on the optimized package, the optimal SNR quiescent operating point of the AlGaN/GaN sensor was determined. By biasing the sensor at the optimal quiescent operating point and immobilizing the magnetic beads with anti-BNP on the gate of the AlGaN/GaN sensor, the LOD for BNP detection was further improved to 0.097 pg/mL.

scholarly journals Rapid and Sensitive Detection of miRNA Based on AC Electrokinetic Capacitive Sensing for Point-of-Care Applications

Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 3985
Author(s):  
Nan Wan ◽  
Yu Jiang ◽  
Jiamei Huang ◽  
Rania Oueslati ◽  
Shigetoshi Eda ◽  
...  
Keyword(s):  
Limit Of Detection ◽  
Point Of Care ◽  
Low Cost ◽  
Clinical Diagnostics ◽  
Detection Methods ◽  
Capacitive Sensing ◽  
Application Potential ◽  
Mirna Detection ◽  
Mirna 25 ◽  
Low Sensitivity

A sensitive and efficient method for microRNAs (miRNAs) detection is strongly desired by clinicians and, in recent years, the search for such a method has drawn much attention. There has been significant interest in using miRNA as biomarkers for multiple diseases and conditions in clinical diagnostics. Presently, most miRNA detection methods suffer from drawbacks, e.g., low sensitivity, long assay time, expensive equipment, trained personnel, or unsuitability for point-of-care. New methodologies are needed to overcome these limitations to allow rapid, sensitive, low-cost, easy-to-use, and portable methods for miRNA detection at the point of care. In this work, to overcome these shortcomings, we integrated capacitive sensing and alternating current electrokinetic effects to detect specific miRNA-16b molecules, as a model, with the limit of detection reaching 1.0 femto molar (fM) levels. The specificity of the sensor was verified by testing miRNA-25, which has the same length as miRNA-16b. The sensor we developed demonstrated significant improvements in sensitivity, response time and cost over other miRNA detection methods, and has application potential at point-of-care.

scholarly journals Demonstration of a Label-Free and Low-Cost Optical Cavity-Based Biosensor Using Streptavidin and C-Reactive Protein

Biosensors ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 4
Author(s):  
Donggee Rho ◽  
Seunghyun Kim
Keyword(s):  
Limit Of Detection ◽  
Point Of Care ◽  
Low Cost ◽  
Optical Cavity ◽  
Sample Volume ◽  
Small Sample ◽  
Label Free ◽  
C Reactive Protein ◽  
Reactive Protein ◽  
Cavity Structure

An optical cavity-based biosensor (OCB) has been developed for point-of-care (POC) applications. This label-free biosensor employs low-cost components and simple fabrication processes to lower the overall cost while achieving high sensitivity using a differential detection method. To experimentally demonstrate its limit of detection (LOD), we conducted biosensing experiments with streptavidin and C-reactive protein (CRP). The optical cavity structure was optimized further for better sensitivity and easier fluid control. We utilized the polymer swelling property to fine-tune the optical cavity width, which significantly improved the success rate to produce measurable samples. Four different concentrations of streptavidin were tested in triplicate, and the LOD of the OCB was determined to be 1.35 nM. The OCB also successfully detected three different concentrations of human CRP using biotinylated CRP antibody. The LOD for CRP detection was 377 pM. All measurements were done using a small sample volume of 15 µL within 30 min. By reducing the sensing area, improving the functionalization and passivation processes, and increasing the sample volume, the LOD of the OCB are estimated to be reduced further to the femto-molar range. Overall, the demonstrated capability of the OCB in the present work shows great potential to be used as a promising POC biosensor.

scholarly journals Whole Blood Immunoassay Based on Centrifugal Bead Sedimentation

2011 ◽  
Vol 57 (5) ◽  
pp. 753-761 ◽  
Author(s):  
Ulrich Y Schaff ◽  
Greg J Sommer
Keyword(s):  
Whole Blood ◽  
Single Channel ◽  
Limit Of Detection ◽  
Point Of Care ◽  
Low Cost ◽  
Microfluidic System ◽  
Blood Samples ◽  
Reactive Protein ◽  
Immunoassay Technique ◽  
Microfluidic Immunoassay

BACKGROUND Centrifugal “lab on a disk” microfluidics is a promising avenue for developing portable, low-cost, automated immunoassays. However, the necessity of incorporating multiple wash steps results in complicated designs that increase the time and sample/reagent volumes needed to run assays and raises the probability of errors. We present proof of principle for a disk-based microfluidic immunoassay technique that processes blood samples without conventional wash steps. METHODS Microfluidic disks were fabricated from layers of patterned, double-sided tape and polymer sheets. Sample was mixed on-disk with assay capture beads and labeling antibodies. Following incubation, the assay beads were physically separated from the blood cells, plasma, and unbound label by centrifugation through a density medium. A signal-laden pellet formed at the periphery of the disk was analyzed to quantify concentration of the target analyte. RESULTS To demonstrate this technique, the inflammation biomarkers C-reactive protein and interleukin-6 were measured from spiked mouse plasma and human whole blood samples. On-disk processing (mixing, labeling, and separation) facilitated direct assays on 1-μL samples with a 15-min sample-to-answer time, <100 pmol/L limit of detection, and 10% CV. We also used a unique single-channel multiplexing technique based on the sedimentation rate of different size or density bead populations. CONCLUSIONS This portable microfluidic system is a promising method for rapid, inexpensive, and automated detection of multiple analytes directly from a drop of blood in a point-of-care setting.

scholarly journals Application of Flexible Display Technology to Low Cost Multiplexed Point-of-Care Medical Diagnostic Testing

2016 ◽  
Vol 2 (3_suppl) ◽  
pp. 14s-14s
Author(s):  
Benjamin A. Katchman ◽  
Joseph T. Smith ◽  
Jennifer Blain Christen ◽  
Karen S. Anderson
Keyword(s):  
Intellectual Property ◽  
Limit Of Detection ◽  
Point Of Care ◽  
Low Cost ◽  
Manufacturing Technology ◽  
Analytical Sensitivity ◽  
State University ◽  
Arizona State University ◽  
New Approach ◽  
Display Technology

Abstract 62 One of the key roadblocks limiting the transition of high-sensitivity and high-specificity point-of-care technologies from the research laboratory to wide spread use is the availability of a low-cost-high-volume manufacturing technology. This work presents a new interdisciplinary approach combining low cost commercial display manufacturing technology with programmable high density protein microarray printing technology to fabricate disposable point-of-care immunosensors with clinical level sensitivity. Our approach is designed to leverage advances in commercial display technology to reduce pre-functionalized biosensor substrate costs to pennies per cm2, as well as to leverage the display industry’s ability to manufacture an immense number of low cost consumer electronic products annually. For this work, we demonstrate that our new approach can offer diagnostic sensitivity at or below 10 pg/mL, which approaches the lower limit of detection of typical clinical laboratory instrumentation. Our new approach is also designed to overcome the limited analytical sensitivity of existing POC devices (>100x improved sensitivity). It also contains new capability for multiplexed biomarker detection (>10 antigens) in a single low cost POC device through an innovative disposable and scalable architecture, based on flat panel display technology. Here, we demonstrate multiplexed detection of antibodies to the HPV16 proteins E2, E6, and E7, which are circulating biomarkers for cervical as well as head and neck cancers. This detection technology has 100 percent correlation to our current laboratory-based measurement instrumentation. AUTHORS' DISCLOSURES OF POTENTIAL CONFLICTS OF INTEREST: Benjamin A. Katchman Patents, Royalties, Other Intellectual Property: Arizona State University Joseph T. Smith Patents, Royalties, Other Intellectual Property: Arizona State University Jennifer Blain Christen Patents, Royalties, Other Intellectual Property: Arizona State University Karen S. Anderson Stock or Other Ownership: Provista Diagnostics Consulting or Advisory Role: Provista Diagnostics Patents, Royalties, Other Intellectual Property: Arizona State University

scholarly journals Detection of ESKAPE Bacterial Pathogens at the Point of Care Using Isothermal DNA-Based Assays in a Portable Degas-Actuated Microfluidic Diagnostic Assay Platform

2016 ◽  
Vol 83 (4) ◽  
Author(s):  
Lars D. Renner ◽  
Jindong Zan ◽  
Linda I. Hu ◽  
Manuel Martinez ◽  
Pedro J. Resto ◽  
...  
Keyword(s):  
Limit Of Detection ◽  
Point Of Care ◽  
Low Cost ◽  
Bacterial Pathogens ◽  
Diagnostic System ◽  
Molecular Diagnostic ◽  
Technology Gap ◽  
Content Type ◽  
Antimicrobial Drug Resistance ◽  
Industrial Processing

ABSTRACT An estimated 1.5 billion microbial infections occur globally each year and result in ∼4.6 million deaths. A technology gap associated with commercially available diagnostic tests in remote and underdeveloped regions prevents timely pathogen identification for effective antibiotic chemotherapies for infected patients. The result is a trial-and-error approach that is limited in effectiveness, increases risk for patients while contributing to antimicrobial drug resistance, and reduces the lifetime of antibiotics. This paper addresses this important diagnostic technology gap by describing a low-cost, portable, rapid, and easy-to-use microfluidic cartridge-based system for detecting the ESKAPE (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter spp.) bacterial pathogens that are most commonly associated with antibiotic resistance. The point-of-care molecular diagnostic system consists of a vacuum-degassed microfluidic cartridge preloaded with lyophilized recombinase polymerase amplification (RPA) assays and a small portable battery-powered electronic incubator/reader. The isothermal RPA assays detect the targeted ESKAPE pathogens with high sensitivity (e.g., a limit of detection of ∼10 nucleic acid molecules) that is comparable to that of current PCR-based assays, and they offer advantages in power consumption, engineering, and robustness, which are three critical elements required for the point-of-care setting. IMPORTANCE This paper describes a portable system for rapidly identifying bacteria in resource-limited environments; we highlight the capabilities of the technology by detecting different pathogens within the ESKAPE collection, which cause nosocomial infections. The system is designed around isothermal DNA-based assays housed within an autonomous plastic cartridge that are designed with the end user in mind, who may have limited technological training. Displaying excellent sensitivity and specificity, the assay systems that we demonstrate may enable future diagnoses of bacterial infection to guide the development of effective chemotherapies and may have a role in areas beyond health where rapid detection is valuable, including in industrial processing and manufacturing, food security, agriculture, and water quality testing.

scholarly journals Inkjet printing of paraffin on paper allows low-cost point-of-care diagnostics for pathogenic fungi

Cellulose ◽  
2020 ◽  
Vol 27 (13) ◽  
pp. 7691-7701 ◽  
Author(s):  
Anusha Prabhu ◽  
M. S. Giri Nandagopal ◽  
Prakash Peralam Yegneswaran ◽  
Hardik Ramesh Singhal ◽  
Naresh Kumar Mani
Keyword(s):  
Filter Paper ◽  
Limit Of Detection ◽  
Point Of Care ◽  
Low Cost ◽  
Pathogenic Fungi ◽  
Sem Analysis ◽  
Qualitative Assessment ◽  
Resource Limited ◽  
Hydrophobic Barrier ◽  
Pore Blockage

Abstract We present a high resolution, ultra-frugal printing of paper microfluidic devices using in-house paraffin formulation on a simple filter paper. The patterns printed using an office inkjet printer formed a selective hydrophobic barrier of 4 ± 1 µm thickness with a hydrophilic channel width of 275 µm. These printed patterns effectively confine common aqueous solutions and solvents, which was verified by solvent compatibility studies. SEM analysis reveals that the solvent confinement is due to pore blockage in the filter paper. The fabricated paper-based device was validated for qualitative assessment of Candida albicans (pathogenic fungi) by using a combination of L-proline β-naphthylamide as the substrate and cinnamaldehyde as an indicator. Our studies reveal that the pathogenic fungi can be detected within 10 min with the limit of detection (LOD) of 0.86 × 106 cfu/mL. Owing to its simplicity, this facile method shows high potential and can be scaled up for developing robust paper-based devices for biomarker detection in resource-limited settings. Graphic abstract

scholarly journals A Systematic Study and Potential Limitations of Proton-ELISA Platform for α-Synuclein Antigen Detection

Chemosensors ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 5
Author(s):  
Chia-Ming Yang ◽  
Jia-Yuan Chang ◽  
Min-Yi Chen ◽  
Chao-Sung Lai
Keyword(s):  
Limit Of Detection ◽  
Point Of Care ◽  
Low Cost ◽  
Systematic Investigation ◽  
Antigen Detection ◽  
Enzyme Linked Immunosorbent Assay ◽  
Testing Environment ◽  
Ph Changes ◽  
Speed Up ◽  
Detection Of Biomarkers

To evaluate point-of-care testing (POCT) for the potential early detection of biomarkers of Parkinson’s disease, a systematic investigation of portable and low-cost platforms is performed based on the Proton-enzyme-linked immunosorbent assay (Proton-ELISA) methodology. The detection of the α-synuclein antigen was first presented by biotin-relative linkers, and glucose substrate solution was first performed with a systematic experimental design to optimize the sensing results. All materials in this study are commercially available. Three different experiments with the partitional check were performed to investigate the Proton-ELISA platform, including proton catalyzed efficiency, blocking efficiency, and full Proton-ELISA procedure. The response time was selected as 15 min by the time-dependent curves of a full reaction. The limit of detection of conventional ELISA kits is 0.169 ng/mL, which is much lower than the Proton-ELISA results. The final response of the full Proton-ELISA procedure to pH changes was approximately 0.60 and 0.12 for α-synuclein antigen concentrations of 100 ng/mL and 4 ng/mL, respectively. With the partitional check, pH changes of pure glucose substrate and conjugated oxidase and interference of the nonspecific binding are 1.7 and 0.04, respectively. The lower pH changes far from the partitional check results can be concluded for the properties of glucose oxidase conjugation, including the isoelectric point and binding affinity modification by the testing environment. This preliminary guideline can be used as a lesson learnt to speed up following studies of the evaluation and optimization of other antigen detection. Therefore, Proton-ELISA can be suggested for some special applications with the help of custom-designed conjugation in the environment with less degradation or interference and a proper detection concentration range.

scholarly journals Ultra-low HIV-1 p24 detection limits with a bioelectronic sensor

2019 ◽  
Vol 412 (4) ◽  
pp. 811-818 ◽  
Author(s):  
Eleonora Macchia ◽  
Lucia Sarcina ◽  
Rosaria Anna Picca ◽  
Kyriaki Manoli ◽  
Cinzia Di Franco ◽  
...  
Keyword(s):  
Capsid Protein ◽  
Single Molecule ◽  
Limit Of Detection ◽  
Point Of Care ◽  
Low Cost ◽  
Wide Field ◽  
Label Free ◽  
Limit Of Quantification ◽  
Great Relevance ◽  
Hiv 1

AbstractEarly diagnosis of the infection caused by human immunodeficiency virus type-1 (HIV-1) is vital to achieve efficient therapeutic treatment and limit the disease spreading when the viremia is at its highest level. To this end, a point-of-care HIV-1 detection carried out with label-free, low-cost, and ultra-sensitive screening technologies would be of great relevance. Herein, a label-free single molecule detection of HIV-1 p24 capsid protein with a large (wide-field) single-molecule transistor (SiMoT) sensor is proposed. The system is based on an electrolyte-gated field-effect transistor whose gate is bio-functionalized with the antibody against the HIV-1 p24 capsid protein. The device exhibits a limit of detection of a single protein and a limit of quantification in the 10 molecule range. This study paves the way for a low-cost technology that can quantify, with single-molecule precision, the transition of a biological organism from being “healthy” to being “diseased” by tracking a target biomarker. This can open to the possibility of performing the earliest possible diagnosis.

scholarly journals Low-Cost Manually Assembled Open Source Reader for Isothermal Pathogen Detection from Saliva using RT-LAMP: SARS-CoV-2 Use Case

2020 ◽  
Author(s):  
John C. Bramley ◽  
Jason E. Waligorski ◽  
Colin L. Kremitzki ◽  
Mariel J. Liebeskind ◽  
Alex L. Yenkin ◽  
...  
Keyword(s):  
Pathogen Detection ◽  
Limit Of Detection ◽  
Point Of Care ◽  
Low Cost ◽  
One Pot ◽  
Home Testing ◽  
Wide Range ◽  
Platform Technology ◽  
Crude Sample ◽  
Analytical Limit

AbstractDistributed “Point-of-Care” or “at-Home” testing is an important component for a complete suite of testing solutions. This manuscript describes the construction and operation of a platform technology designed to meet this need. The ongoing COVID-19 pandemic will be used as the proof-of-concept for the efficacy and deployment of this platform. The technology outlined consists of a one-pot, reverse-transcription loop-mediated isothermal amplification (RT-LAMP) chemistry coupled with a low-cost and user-assembled reader using saliva as input. This platform is readily adapted to a wide range of pathogens due to the genetic basis of the reaction. A complete guide to the construction of the reader as well as the production of the reaction chemistry are provided here. Additionally, analytical limit of detection data and the results from saliva testing of SARS-CoV-2, are presented. The platform technology outlined here demonstrates a rapid, distributed, molecular point-of-care solution for pathogen detection using crude sample input.

scholarly journals Colorimetric Determination of Nitrate after Reduction to Nitrite in a Paper-Based Dip Strip

2021 ◽  
Vol 5 (1) ◽  
pp. 9
Author(s):  
Amer Charbaji ◽  
Hojat Heidari-Bafroui ◽  
Nasim Rahmani ◽  
Constantine Anagnostopoulos ◽  
Mohammad Faghri
Keyword(s):  
Limit Of Detection ◽  
Point Of Care ◽  
Low Cost ◽  
Colorimetric Detection ◽  
Water Quality Monitoring ◽  
Colorimetric Determination ◽  
Limit Of Quantification ◽  
Point Of Care Diagnostics ◽  
Reduction Efficiency ◽  
Nitrate And Nitrite

Paper-based microfluidic technology is a relatively new field of research that provides low-cost platforms and sensors for point-of-care diagnostics. While the majority of research in this field has been for biomedical applications, more and more paper-based devices and platforms are being designed and developed for environmental applications, such as water quality monitoring and assessment. One such application is the detection of nitrate in water samples. Colorimetric detection of nitrate by paper-based devices using the Griess assay requires the reduction of nitrate to nitrite before undergoing the reaction. In this paper, we measured the performance of a paper-based dip strip for detecting nitrate and nitrite by calculating its limit of detection and limit of quantification. We also calculated the reduction efficiency of vanadium (III) chloride in the dip strip for detecting nitrate. Our results show that the reduction time of nitrate via vanadium (III) chloride is much longer than that when using zinc microparticles. Our results also show that the performance of the dip strip using vanadium (III) chloride for nitrate detection is not as good as more intricate paper-based devices that have a separate reaction zone with zinc microparticles. The limits of detection and quantification calculated were 3.352 and 7.437 ppm, and the nitrate reduction efficiency varied over the range of nitrate concentrations tested.

Sign in / Sign up

Export Citation Format

Share Document