scholarly journals Dually nanocoated planar waveguides towards multi-parameter sensing

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ismel Dominguez ◽  
Ignacio Del Villar ◽  
Omar Fuentes ◽  
Jesus M. Corres ◽  
Ignacio R. Matias
Keyword(s):  
Thin Film ◽  
Near Infrared ◽  
Visible Region ◽  
Planar Waveguides ◽  
Microscope Slide ◽  
Glass Coverslip ◽  
Temperature And Humidity ◽  
Multiple Resonances ◽  
Spectral Ranges

AbstractThe incidence of light on the edge of a glass coverslip for a microscope slide, deposited with a thin film on both faces, permits exciting two resonances in each polarisation state of the input light, TE and TM. This dually nanocoated waveguide can be used for detecting simultaneously two different parameters on the basis of a further deposition of suitable materials on each face. As an example, the possibility of detecting temperature and humidity by using polydimethylsiloxane and agarose coatings, respectively, was demonstrated, which opens the path for the development of other dual-parameter sensors, and for even more parameters in cases in which each face of the coverslip is patterned. Moreover, the device was optimised in order to position two resonances in the near infrared (NIR) and two resonances in the visible region, with sensitivities of 0.34 nm/°C and 0.23 nm/%RH in the visible region and 1.16 nm/°C and 0.34 nm/%RH in the NIR, respectively, demonstrating the possibility of using the device in both spectral ranges and opening the path for the development of sensors based on multiple resonances, each one related to a different parameter to be detected.

scholarly journals Plasmon-Enhanced Sunlight Harvesting in Thin-Film Solar Cell by Randomly Distributed Nanoparticle Array

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1380
Author(s):  
Marwa M. Tharwat ◽  
Ashwag Almalki ◽  
Amr M. Mahros
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
Near Infrared ◽  
Structural Parameters ◽  
Visible Region ◽  
Nanoparticle Array ◽  
Solar Energy Harvesting ◽  
Infra Red ◽  
Crucial Parameter

In this paper, a randomly distributed plasmonic aluminum nanoparticle array is introduced on the top surface of conventional GaAs thin-film solar cells to improve sunlight harvesting. The performance of such photovoltaic structures is determined through monitoring the modification of its absorbance due to changing its structural parameters. A single Al nanoparticle array is integrated over the antireflective layer to boost the absorption spectra in both visible and near-infra-red regimes. Furthermore, the planar density of the plasmonic layer is presented as a crucial parameter in studying and investigating the performance of the solar cells. Then, we have introduced a double Al nanoparticle array as an imperfection from the regular uniform single array as it has different size particles and various spatial distributions. The comparison of performances was established using the enhancement percentage in the absorption. The findings illustrate that the structural parameters of the reported solar cell, especially the planar density of the plasmonic layer, have significant impacts on tuning solar energy harvesting. Additionally, increasing the plasmonic planar density enhances the absorption in the visible region. On the other hand, the absorption in the near-infrared regime becomes worse, and vice versa.

scholarly journals Integrated Optical Phased Arrays for Beam Forming and Steering

2021 ◽  
Vol 11 (9) ◽  
pp. 4017
Author(s):  
Yongjun Guo ◽  
Yuhao Guo ◽  
Chunshu Li ◽  
Hao Zhang ◽  
Xiaoyan Zhou ◽  
...  
Keyword(s):  
Near Infrared ◽  
Phased Arrays ◽  
Mechanical Stability ◽  
Building Blocks ◽  
High Yield ◽  
Beam Forming ◽  
Integrated Optical ◽  
Optical Phased Arrays ◽  
Infrared Spectral ◽  
Spectral Ranges

Integrated optical phased arrays can be used for beam shaping and steering with a small footprint, lightweight, high mechanical stability, low price, and high-yield, benefiting from the mature CMOS-compatible fabrication. This paper reviews the development of integrated optical phased arrays in recent years. The principles, building blocks, and configurations of integrated optical phased arrays for beam forming and steering are presented. Various material platforms can be used to build integrated optical phased arrays, e.g., silicon photonics platforms, III/V platforms, and III–V/silicon hybrid platforms. Integrated optical phased arrays can be implemented in the visible, near-infrared, and mid-infrared spectral ranges. The main performance parameters, such as field of view, beamwidth, sidelobe suppression, modulation speed, power consumption, scalability, and so on, are discussed in detail. Some of the typical applications of integrated optical phased arrays, such as free-space communication, light detection and ranging, imaging, and biological sensing, are shown, with future perspectives provided at the end.

scholarly journals Synthesis, Crystallography, Microstructure, Crystal Defects, Optical and Optoelectronic Properties of ZnO:CeO2 Mixed Oxide Thin Films

Photonics ◽  
2020 ◽  
Vol 7 (4) ◽  
pp. 112
Author(s):  
Qais M. Al-Bataineh ◽  
Mahmoud Telfah ◽  
Ahmad A. Ahmad ◽  
Ahmad M. Alsaad ◽  
Issam A. Qattan ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Refractive Index ◽  
Mixed Oxide ◽  
Visible Region ◽  
Functional Materials ◽  
Crystal Defects ◽  
Optoelectronic Properties ◽  
Oxide Thin Films ◽  
Pure Ceo2

We report the synthesis and characterization of pure ZnO, pure CeO2, and ZnO:CeO2 mixed oxide thin films dip-coated on glass substrates using a sol-gel technique. The structural properties of as-prepared thin film are investigated using the XRD technique. In particular, pure ZnO thin film is found to exhibit a hexagonal structure, while pure CeO2 thin film is found to exhibit a fluorite cubic structure. The diffraction patterns also show the formation of mixed oxide materials containing well-dispersed phases of semi-crystalline nature from both constituent oxides. Furthermore, optical properties of thin films are investigated by performing UV–Vis spectrophotometer measurements. In the visible region, transmittance of all investigated thin films attains values as high as 85%. Moreover, refractive index of pure ZnO film was found to exhibit values ranging between 1.57 and 1.85 while for CeO2 thin film, it exhibits values ranging between 1.73 and 2.25 as the wavelength of incident light decreases from 700 nm to 400 nm. Remarkably, refractive index of ZnO:CeO2 mixed oxide-thin films are tuned by controlling the concentration of CeO2 properly. Mixed oxide-thin films of controllable refractive indices constitute an important class of smart functional materials. We have also investigated the optoelectronic and dispersion properties of ZnO:CeO2 mixed oxide-thin films by employing well-established classical models. The melodramatic boost of optical and optoelectronic properties of ZnO:CeO2 mixed oxide thin films establish a strong ground to modify these properties in a skillful manner enabling their use as key potential candidates for the fabrication of scaled optoelectronic devices and thin film transistors.

Near-Infrared Light Emission from of Er-Doped ZnO Thin Film in Micropits Processed on Si Substrate

2006 ◽  
Vol 320 ◽  
pp. 113-116
Author(s):  
Shigeru Tanaka ◽  
Yukari Ishikawa ◽  
Naoki Ohashi ◽  
Junichi Niitsuma ◽  
Takashi Sekiguchi ◽  
...  
Keyword(s):  
Thin Film ◽  
Near Infrared ◽  
Light Emission ◽  
Infrared Light ◽  
Zno Thin Film ◽  
Si Substrate ◽  
Near Infrared Light ◽  
Transmission Electron ◽  
Doped Zno ◽  
Er Doped

We have obtained Er-doped ZnO thin film in a micropattern of reverse trapezoids processed on Si substrate by sputtering and ultrafine polishing techniques. Near-infrared light emission was detected successfully from the thin film filling a single micropit with 10 μm square. Transmission electron microscopy (TEM) observation showed epitaxial growth of ZnO crystals along the curvature of the micropit.

scholarly journals Design and fabrication of a semi-transparent solar cell considering the effect of the layer thickness of MoO3/Ag/MoO3 transparent top contact on optical and electrical properties

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Çağlar Çetinkaya ◽  
Erman Çokduygulular ◽  
Barış Kınacı ◽  
Feyza Güzelçimen ◽  
Yunus Özen ◽  
...  
Keyword(s):  
Solar Cell ◽  
Layer Thickness ◽  
High Performance ◽  
Near Infrared ◽  
Visible Region ◽  
Infrared Region ◽  
Experimental Comparison ◽  
Top Contact ◽  
Cie Chromaticity ◽  
Design And Manufacture

AbstractWe conducted the present study to design and manufacture a semi-transparent organic solar cell (ST-OSC). First, we formed a transparent top contact as MoO3/Ag/MoO3 in a dielectric/metal/dielectric (DMD) structure. We performed the production of an FTO/ZnO/P3HT:PCBM/MoO3/Ag/MoO3 ST-OSC by integrating MoO3/Ag/MoO3 (10/$$d_{m}$$ d m /$$d_{{od}}$$ d od nm) instead of an Ag electrode in an opaque FTO/ZnO/P3HT:PCBM/MoO3/Ag (–/40/130/10/100 nm) OSC, after theoretically achieving optimal values of optical and electrical parameters depending on Ag layer thickness. The transparency decreased with the increase of $$d_{m}$$ d m values for current DMD. Meanwhile, maximum transmittance and average visible transmittance (AVT) indicated the maximum values of over 92% for $$d_{m} ~$$ d m  = 4 and 8 nm, respectively. For ST-OSCs, the absorption and reflectance increased in the visible region by a wavelength of longer than 560 nm and in the whole near-infrared region by increasing $$d_{m}$$ d m up to 16 nm. Moreover, in the CIE chromaticity diagram, we reported a shift towards the D65 Planckian locus for colour coordinates of current ST-OSCs. Electrical analysis indicated the photogenerated current density and AVT values for $$d_{m} = 6$$ d m = 6  nm as 63.30 mA/cm2 and 38.52%, respectively. Thus, the theoretical and experimental comparison of optical and electrical characteristics confirmed that the manufactured structure is potentially conducive for a high-performance ST-OSC.

High-sensitivity hybrid PbSe/ITZO thin film-based phototransistor detecting from 2100 nm to 2500 nm near-infrared illumination

2022 ◽  
Author(s):  
Ali Sehpar Shikoh ◽  
Gi Sang Choi ◽  
Sungmin Hong ◽  
Kwang Seob Jeong ◽  
Jaekyun Kim
Keyword(s):  
Thin Film ◽  
Metal Oxide ◽  
High Performance ◽  
Near Infrared ◽  
Effective Diffusion ◽  
Band Alignment ◽  
Oxide Thin Film ◽  
Photogenerated Carrier ◽  
Channel Layer ◽  
Metal Oxide Thin Film

Abstract We report that high absorption PbSe colloidal quantum dots (QDs) having a peak absorbance beyond 2100 nm were synthesized and incorporated into InSnZnO (ITZO) channel layer-based thin film transistors (TFTs). It was intended that PbSe QDs with proportionally less photocurrent modulation can be remedied by semiconducting and low off-current ITZO-based TFT configuration. Multiple deposition scheme of PbSe QDs on ITZO metal oxide thin film gave rise to nearly linear increase of film thickness with acceptably uniform and smooth surface (less than 10 nm). Hybrid PbSe/ITZO thin film-based phototransistor exhibited the best performance of near infrared (NIR) detection in terms of response time, sensitivity and detectivity as high as 0.38 s, 3.91 and 4.55 × 107 Jones at room temperature, respectively. This is indebted mainly from the effective diffusion of photogenerated carrier from the PbSe surface to ITZO channel layer as well as from the conduction band alignment between them. Therefore, we believe that our hybrid PbSe/ITZO material platform can be widely used to be in favour of incorporation of solution-processed colloidal light absorbing material into the high-performance metal oxide thin film transistor configuration.

scholarly journals ANÁLISIS DE COMPONENTES PRINCIPALES DE IMÁGENES MULTIESPECTRALES EN EL ÁMBITO DEL ARTE RUPESTRE

2017 ◽  
Author(s):  
Berta Carrión-Ruiz ◽  
José Luis Lerma
Keyword(s):  
Principal Component Analysis ◽  
Near Infrared ◽  
Rock Art ◽  
Visible Region ◽  
Principal Component ◽  
Optical Filters ◽  
Infrared Region ◽  
Spectral Behaviour ◽  
Near Infrared Region ◽  
Art Analysis

This paper tackles principal component analysis (PCA) in images that include wavelengths between 380-1000 nm. Our approach is focussed on taking advantage of the potencial of ultraviolet and infrarred images, in combination with the visible ones, to improve documentation process and rock art analysis. In this way, we want to improve the discrimination between pigment and support rock, and analyse the spectral behaviour of rock art paintings in the ultraviolet and infrared regions. Three images were used, one image from the ultraviolet (UV) region, one from the visible region (VIS) and another one from the near infrared region (NIR). Optical filters coupled to the camera optics were used to take the images. These filters capture specific wavelengths excluding radiation that we are not interested in registering. Finally, PCA is applied to the acquired images. The results obtained demonstrate the PCA usefulness with imagery in this field and also it is possible to extract some conclusions about the correspondent paint pigments.http://dx.doi.org/10.4995/CIGeo2017.2017.6597

scholarly journals Donor Acceptor Copolymers from Cyclopentannulation Polymerizations with Dicyclopenta[cd,jk]pyrene and Dicyclopenta[cd,lm]perylene Acceptors

2020 ◽  
Author(s):  
Ain Uddin ◽  
Kyle Plunkett
Keyword(s):  
Thin Film ◽  
Cyclic Voltammetry ◽  
Light Absorption ◽  
Visible Region ◽  
Optoelectronic Properties ◽  
Band Gaps ◽  
Molecular Weights ◽  
Palladium Catalyzed ◽  
Donor Acceptor ◽  
Film Absorption

A series of donor-acceptor copolymers with dicyclopenta[cd,jk]pyrene and dicyclopenta[cd,lm]perylene acceptor units was prepared via palladium catalyzed cyclopenta-annulation reactions. The acceptor units were paired with diethynyl containing donor groups based on benzo[1,2-b:4,5-b']dithiophene, thieno[3,2-b]thiophene, and 4-octyl-4H-dithieno[3,2-b:2',3'-d]pyrrole to create six polymer variants. The cyclopentannulation polymerization resulted in copolymers with molecular weights (Mn) of 6-14 kDa and broad light absorption in the visible region with band gaps of 1.38-1.85 eV. The synthetic methodology, as well as optoelectronic properties, including thin-film absorption and cyclic voltammetry, of the donor-acceptor copolymers are presented.<br> <br><br>

scholarly journals NIR-Emitting Benzene-Fused Oligo-BODIPYs for Bioimaging

2021 ◽  
Author(s):  
Gabriele Selvaggio ◽  
Robert Nißler ◽  
Peter Nietmann ◽  
Atanu Patra ◽  
Lukas Jacek Patalag ◽  
...  
Keyword(s):  
Particle Tracking ◽  
Near Infrared ◽  
Bathochromic Shift ◽  
Visible Region ◽  
Tissue Penetration ◽  
Actin Networks ◽  
Nir Dyes ◽  
Nir Fluorescence ◽  
J Aggregates ◽  
20 Nm

Near-infrared (NIR) fluorophores are emerging tools for biophotonics because of their reduced scattering, increased tissue penetration and low phototoxicity. However, the library of NIR fluorophores is still limited. Here, we report the NIR fluorescence of two benzene-fused oligo-BODIPYs in their hexameric (H) and octameric (O) forms. These dyes emit bright NIR fluorescence (H: maxima 943/1075 nm, O: maxima 976/1115 nm) that can be excited in the NIR (H = 921 nm, O = 956 nm) or non-resonantly over a broad range in the visible region. The emission bands of H show a bathochromic shift and peak sharpening with increasing dye concentration suggesting the presence of J-aggregates. Furthermore, the emission maxima of both H and O shift up to 20 nm in solvents of different polarity. These dyes can be used as NIR ink and imaged remotely on the macroscopic level with a stand-off distance of 20 cm. We furthermore demonstrate their versatility for biophotonics by coating microscale beads and performing microrheology via NIR video particle tracking (NIR-VPT) in biopolymer (F-actin) networks. No photodamaging of the actin filaments takes place, which is typically observed for visible fluorophores and highlights the advantages of these NIR dyes.

Sign in / Sign up

Export Citation Format

Share Document