Fate of adsorbed arsenic during early stage sulfidization of nano-ferrihydrite

Human body has a hierarchy of structures. There are many organs which are affected much earlier by a disease when it is detected. Most modern sensors can detect anomalies when its concentration in the body fluid reaches to millimolar range. But more sensitive biosensors should detect disease from much lower concentration like femtomolar range. So, extremely sensitive biosensors are needed for early detection of fatal diseases at their early stage. It should detect the target molecule from a very low concentration of analyte. Also, molecules which we often need to detect are too small in size. So Nanotechnology and biotechnology should shake hand to detect nanosized particles from an extremely low concentration solution. Hence we are in a real need of a biosensor. Here we are interested in charged biomolecules and will discuss the performance of Field- Effect Transistor based biosensosrs by computational method.

Download Full-text

Concentration Sensitivity of Nucleic Acid and Protein Molecule Detection Using Nanowire Biosensors

Biophysica ◽

10.3390/biophysica1030024 ◽

2021 ◽

Vol 1 (3) ◽

pp. 328-333

Author(s):

Yuri D. Ivanov ◽

Vadim Yu. Tatur ◽

Alexander V. Glukhov ◽

Vadim S. Ziborov

Keyword(s):

Detection Limit ◽

Nucleic Acid ◽

Infectious Diseases ◽

Early Stage ◽

Protein Molecule ◽

Cooperative Effect ◽

Topical Issue ◽

Low Concentration ◽

Concentration Sensitivity ◽

Concentration Detection Limit

The concentration detection limit (DL) of biomacromolecules attainable using a nanowire detector has become a topical issue. A DL of 10−15 M is required to reveal oncological and infectious diseases at an early stage. This study discusses the DL experimentally attainable in the subfemtomolar concentration range, and possible mechanisms explaining such a low-concentration DL through the cooperative effect of biomacromolecular complexes formed on the surface of the nanowire (NW) chip near the nanowire.

Download Full-text

Effect of low-concentration carbohydrate on patient-centered quality of recovery in patients undergoing thyroidectomy: a prospective randomized trial

BMC Anesthesiology ◽

10.1186/s12871-021-01323-8 ◽

2021 ◽

Vol 21 (1) ◽

Author(s):

Shun Wang ◽

Peng-fei Gao ◽

Xiao Guo ◽

Qi Xu ◽

Yun-feng Zhang ◽

...

Keyword(s):

Blood Glucose ◽

Early Stage ◽

Pure Water ◽

Trauma Surgery ◽

Oral Intake ◽

Minor Trauma ◽

Patient Centered ◽

Low Concentration ◽

Quality Of Recovery

Abstract Backround At present, low-concentration carbohydrate is rarely used in minor trauma surgery, and its clinical efficacy is unknown. The aim of the study was to evaluate the effect of preoperative oral low-concentration carbohydrate on patient-centered quality of recovery in patients undergoing thyroidectomy using Quality of Recovery − 15 (QoR-15) questionnaire. Methods One hundred twenty patients were randomized to oral intake of 300 ml carbohydrate solution (CH group) or 300 ml pure water (PW group) 2 h before surgery or fasting for 8 h before surgery (F group). The QoR-15 questionnaire was administered to compare the quality of recovery at 1d before surgery (T0), 24 h, 48 h, 72 h after surgery (T1, T2, T3), and perioperative blood glucose was recorded. Results Compared to the F group, the QoR-15 scores were statistically higher in the CH and PW group at T1 (P < 0.05), and the enhancement of recovery quality reached the clinical significance at T1 in the CH group compared with the F group. Among the five dimensions of the QoR-15 questionnaire, physical comfort, physiological support and emotional dimension in the CH group were significantly better than the F group (P < 0.05) at T1. Besides, blood glucose of CH group was significantly lower than the PW group and F group at each time point after surgery. Conclusions Low-concentration carbohydrate could decrease the incidence of postoperative hyperglycemia and improve the patient-centered quality of recovery on patients undergoing open thyroidectomy at the early stage postoperatively. Trial registration ChiCTR1900024731. Date of registration: 25/07/2019.

Download Full-text

Alterations in the number of motoneurons containing immunoreactive calcitonin gene-related peptide(CGRP)& choline acetyltransferase(ChAT) in the cervical spinal cord of the wobbler mouse during the development of the motoneuron disease

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100141226 ◽

1995 ◽

Vol 53 ◽

pp. 970-971

Author(s):

L. Vacca-Galloway ◽

Y.Q. Zhang ◽

P. Bose ◽

S.H. Zhang

Keyword(s):

Spinal Cord ◽

Early Stage ◽

Cervical Spinal Cord ◽

Wild Type Mouse ◽

Reflex Response ◽

Mouse Strains ◽

Behavioral Tests ◽

Wobbler Mouse ◽

Stage 4 ◽

Stage 1

The Wobbler mouse (wr) has been studied as a model for inherited human motoneuron diseases (MNDs). Using behavioral tests for forelimb power, walking, climbing, and the “clasp-like reflex” response, the progress of the MND can be categorized into early (Stage 1, age 21 days) and late (Stage 4, age 3 months) stages. Age-and sex-matched normal phenotype littermates (NFR/wr) were used as controls (Stage 0), as well as mice from two related wild-type mouse strains: NFR/N and a C57BI/6N. Using behavioral tests, we also detected pre-symptomatic Wobblers at postnatal ages 7 and 14 days. The mice were anesthetized and perfusion-fixed for immunocytochemical (ICC) of CGRP and ChAT in the spinal cord (C3 to C5).Using computerized morphomety (Vidas, Zeiss), the numbers of IR-CGRP labelled motoneurons were significantly lower in 14 day old Wobbler specimens compared with the controls (Fig. 1). The same trend was observed at 21 days (Stage 1) and 3 months (Stage 4). The IR-CGRP-containing motoneurons in the Wobbler specimens declined progressively with age.

Download Full-text

Automated high-resolution microscopy: the approaches so far

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100125312 ◽

1987 ◽

Vol 45 ◽

pp. 58-61

Author(s):

W. O. Saxton

Keyword(s):

High Resolution ◽

Early Stage ◽

Automatic Recording ◽

Microprocessor Control ◽

Alternative Systems ◽

Electron Image ◽

Complete Automation ◽

Analysis System ◽

High Resolution Microscopy

Recent commercial microscopes with internal microprocessor control of all major functions have already demonstrated some of the benefits anticipated from such systems, such as continuous magnification, rotation-free diffraction and magnification, automatic recording of mutually registered focal series, and fewer control knobs. Complete automation of the focusing, stigmating and alignment of a high resolution microscope, allowing focal series to be recorded at preselected focus values as well, is still imminent rather than accomplished, however; some kind of image pick-up and analysis system, fed with the electron image via a TV camera, is clearly essential for this, but several alternative systems and algorithms are still being explored. This paper reviews the options critically in turn, and stresses the need to consider alignment and focusing at an early stage, and not merely as an optional extension to a basic proposal.

Download Full-text

Direct observation of Fe-Al-Zn ternary intermetallic compound and its transformation during the early stage of hot-dip galvanizing

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100151416 ◽

1993 ◽

Vol 51 ◽

pp. 1116-1117

Author(s):

C. S. Lin ◽

W. A. Chiou ◽

M. Meshii

Keyword(s):

Intermetallic Compound ◽

Reaction Rate ◽

Diffusion Rate ◽

Early Stage ◽

Zinc Bath ◽

Steel Sheets ◽

Direct Observations ◽

Solid Iron ◽

Iron And Zinc ◽

Ternary Intermetallic Compound

The galvannealed steel sheets have received ever increased attention because of their excellent post-painting corrosion resistance and good weldability. However, its powdering and flaking tendency during press forming processes strongly impairs its performance. In order to optimize the properties of galvanneal coatings, it is critical to control the reaction rate between solid iron and molten zinc.In commercial galvannealing line, aluminum is added to zinc bath to retard the diffusion rate between iron and zinc by the formation of a thin layer of Al intermetallic compound on the surface of steel at initial hot-dip galvanizing. However, the form of this compound and its transformation are still speculated. In this paper, we report the direct observations of this compound and its transformation.The specimens were prepared in a hot-dip simulator in which the steel was galvanized in the zinc bath containing 0.14 wt% of Al at a temperature of 480 °C for 5 seconds and was quenched by liquid nitrogen.

Download Full-text

Anisotropy of interfacial defects in the initial stage of MOVPE GaAs growth On Si

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100176095 ◽

1990 ◽

Vol 48 (4) ◽

pp. 592-593

Author(s):

C. Vannuffel ◽

C. Schiller ◽

J. P. Chevalier

Keyword(s):

Early Stage ◽

Threading Dislocations ◽

Mbe Growth ◽

Detailed Mechanism ◽

Si Substrates ◽

Initial Stage ◽

Interfacial Defects ◽

Interfacial Dislocations ◽

Step Growth ◽

Essential Problem

Recently, interest has focused on the epitaxy of GaAs on Si as a promising material for electronic applications, potentially for integration of optoelectronic devices on silicon wafers. The essential problem concerns the 4% misfit between the two materials, and this must be accommodated by a network of interfacial dislocations with the lowest number of threading dislocations. It is thus important to understand the detailed mechanism of the formation of this network, in order to eventually reduce the dislocation density at the top of the layers.MOVPE growth is carried out on slightly misoriented, (3.5°) from (001) towards , Si substrates. Here we report on the effect of this misorientation on the interfacial defects, at a very early stage of growth. Only the first stage, of the well-known two step growth process, is thus considered. Previously, we showed that full substrate coverage occured for GaAs thicknesses of 5 nm in contrast to MBE growth, where substantially greater thicknesses are required.

Download Full-text