scholarly journals Preface

2022 ◽  
Vol 2155 (1) ◽  
pp. 011001
Keyword(s):  
Oral Presentation ◽  
Nuclear Physics ◽  
High Speed ◽  
Positive Impact ◽  
Technical Equipment ◽  
The Public ◽  
Travel Restrictions ◽  
High Level ◽  
International Advisory ◽  
General Director

(word. doc) should be separate from the PDFs and include information about their virtual format if this is relevant. This information should include: • The reason(s) why the meeting will take/took place virtually (covid- 19/travel restrictions, etc). • The Forum was held both online and offline. All participants who took part offline provided vaccination certificates. The online forum was held for participants who did not have the opportunity to participate in the forum directly or to submit a report in person. Including, in order to be able for the majority of participants to participate in the Forum in a format convenient for them. • Location where the organisers will be/were. • The Forum was held on the premises of the Institute of Nuclear Physics in Almaty, Kazakhstan • The Model, for example, the plenary, the contributions, the time spent to deliver the talks by each speaker. • • The version of the poster or oral presentation was adopted as a model of reports, both online and offline. Plenary lectures were conducted both online and offline, through the presentation and oral presentation of the speaker. In each section, the time for a report was different, on average it ranged from 20 to 30 minutes. • The discussions, the feasibility, room for Q&A? • All questions and discussions were held in conference halls of 5 sections. Including online. Everyone could ask a question and get an answer, upon completion of the report, 10-15 minutes were allotted for this procedure. • The participants: location and the overall attendance number expected. • The participants took part in the forum on the territory of the Institute of Nuclear Physics. Within 5 days, more than 90% of the participants took part offline. There were more than 90 offline participants in total. In general, about 300 applications were accepted for participation in the forum. • The technology needed to deliver the meeting successfully. • The Forum was provided with the most modern technical equipment. Each section contained several projectors, computers and microphone sets for the participants. To ensure high parallelization of communication, high-speed Internet access was used for each 4G section. • Mention any technical difficulties. • • Technical difficulties during the forum were minor and were resolved as they arose. All forum participants appreciated the high level of technical equipment of the forum. • Mention any drawbacks in the delivery of the conference virtually, e.g. impact on the community. • No shortcomings were identified during the forum. The forum had an extremely positive impact on the public, which was mentioned in his speech for the journalists of the national channel, the chairman of the forum and the general director of the INP Batyrzhan Karakozov. Please make sure that the following information is included in the preface: l. The full list of committees names and affiliations which shall be published as part of the preface. Editors of proceedings, ORGANISING COMMITTEE, INTERNATIONAL ADVISORY BOARD, and ORGANIZED BY are available in the pdf.

scholarly journals Strategies to Minimise Numerical Ventilation in CFD Simulations of High-Speed Planing Hulls

2019 ◽  
Author(s):  
Angus Gray-Stephens ◽  
Tahsin Tezdogan ◽  
Sandy Day
Keyword(s):  
Free Surface ◽  
High Speed ◽  
Positive Impact ◽  
Entrance Angle ◽  
The Public ◽  
Depth Analysis ◽  
Niche Area ◽  
Prism Layer ◽  
The Impact ◽  
Mesh Refinements

Abstract Numerical Ventilation (NV) is a well-known problem that occurs when the Volume of Fluid method is used to model vessels with a bow that creates a small, acute entrance angle with the free surface. These are typical of both planing hulls and yachts. There is a general lack of discussion focusing upon Numerical Ventilation available within the public domain, which is attributable to the fact that it only affects such a niche area of naval architecture. The information available is difficult to find, often fleetingly mentioned in papers with a different focus. Numerical Ventilation may be considered one of the main sources of error in numerical simulations of planing hulls and as such warrants an in-depth analysis. This paper sets out to bring together the available work, as well as performing its own investigation into the problem to develop a better understanding of Numerical Ventilation and present alternate solutions. Additionally, the success and impact of different approaches is presented in an attempt to help other researchers avoid and correct for Numerical Ventilation. Interface smearing caused by the simulations inability to track the free surface is identified as the main source of Numerical Ventilation. This originates from the interface between the volume mesh and the prism layer mesh. This study looks into the interface to identify strategies that minimise Numerical Ventilation, presenting a novel solution to prism layer meshing that was found to have a positive impact. Through the implementation of a modified High Resolution Interface Capture (HRIC) scheme and the correct mesh refinements, it is possible to minimise the impact of Numerical Ventilation to a level that will not affect the results of a simulation and is acceptable for engineering applications.

scholarly journals The role of quality standards for chemical products existing on the markets of the European Union in development of innovative entrepreneurship

2020 ◽  
Vol 161 ◽  
pp. 01092
Author(s):  
Anna Starodubova ◽  
Chulpan Misbakhova ◽  
Nailya Gareeva
Keyword(s):  
Foreign Trade ◽  
High Speed ◽  
Positive Impact ◽  
Green Economy ◽  
The European Union ◽  
Innovation Product ◽  
Chemical Products ◽  
High Level ◽  
The Impact ◽  
The Eu

The article studies the method of assessment of the impact of standards on the results of the industry: innovation, product quality, generation of waste, level of “Green Economy” and foreign trade. The approbation which has been carried out for chemical products from 26 countries of the EU in 2018 (based on the cluster analysis is given in the study). It has been concluded that the high level of coverage of standards stimulates innovation of recycling. The level of foreign trade, and the generation of waste occur regardless of the level of coverage of the standards. The high speed of implementation of the standard ensures the high level of “Green Economy”. The more permanent policy of standards ensures high quality of products. Germany is the benchmark for the high level of influence of standards on the results in the chemical industry. For the rest counties of the EU, the potential of standards is not fully disclosed for reasons of insufficient coverage of standards or a large volume of waste. This assessment allows finding the benchmark of the country for study of the positive impact of standards and it helps to identify the successful strategies of standards for achieving high results in the industry.

Radiological safety and assessment of the performance of X-ray systems in veterinary facilities

2020 ◽  
Author(s):  
S. Economides ◽  
C.J. Hourdakis ◽  
C. Pafilis ◽  
G. Simantirakis ◽  
P. Tritakis ◽  
...  
Keyword(s):  
Decision Making ◽  
Radiation Protection ◽  
Atomic Energy Commission ◽  
Atomic Energy ◽  
Regulatory Control ◽  
Continuous Training ◽  
X Ray ◽  
The Public ◽  
Radiological Safety ◽  
High Level

This paper concerns an analysis regarding the performance of X-ray equipment as well as the radiological safety in veterinary facilities. Data were collected from 380 X-ray veterinary facilities countrywide during the on-site regulatory inspections carried out by the Greek Atomic Energy Commission. The analysis of the results shows that the majority of the veterinary radiographic systems perform within the acceptable limits; moreover, the design and shielding of X-ray rooms as well as the applied procedures ensure a high level of radiological safety for the practitioners, operators and the members of the public. An issue that requires specific attention in the optimization process for the proper implementation of veterinary radiology practices in terms of radiological safety is the continuous training of the personnel. The above findings and the regulatory experience gained were valuable decision-making elements regarding the type of the regulatory control of veterinary radiology practices in the new radiation protection framework.

Evaluation of the impact of public investment programs on social and economic performance of territories

2019 ◽  
pp. 109-123
Author(s):  
I. E. Limonov ◽  
M. V. Nesena
Keyword(s):  
Bayesian Modeling ◽  
Positive Impact ◽  
Public Investment ◽  
Difference In Differences ◽  
The Public ◽  
Export Activity ◽  
Regional Investment ◽  
The Difference ◽  
The Impact ◽  
Development Institution

The purpose of this study is to evaluate the impact of public investment programs on the socio-economic development of territories. As a case, the federal target programs for the development of regions and investment programs of the financial development institution — Vnesheconombank, designed to solve the problems of regional development are considered. The impact of the public interventions were evaluated by the “difference in differences” method using Bayesian modeling. The results of the evaluation suggest the positive impact of federal target programs on the total factor productivity of regions and on innovation; and that regional investment programs of Vnesheconombank are improving the export activity. All of the investments considered are likely to have contributed to the reduction of unemployment, but their implementation has been accompanied by an increase in social inequality.

Development and production experience of the multilayer curtain-coated linerboard of Ji’an PM No. 3,

TAPPI Journal ◽  
2014 ◽  
Vol 13 (2) ◽  
pp. 17-25
Author(s):  
JUNMING SHU ◽  
ARTHAS YANG ◽  
PEKKA SALMINEN ◽  
HENRI VAITTINEN
Keyword(s):  
Titanium Dioxide ◽  
High Speed ◽  
Food Packaging ◽  
Production Efficiency ◽  
Positive Impact ◽  
Low Cost ◽  
Board Structure ◽  
Flexographic Printing ◽  
Curtain Coating ◽  
Coating Formulations

The Ji’an PM No. 3 is the first linerboard machine in China to use multilayer curtain coating technology. Since successful startup at the end of 2011, further development has been carried out to optimize running conditions, coating formulations, and the base paper to provide a product with satisfactory quality and lower cost to manufacture. The key challenges include designing the base board structure for the desired mechanical strength, designing the surface properties for subsequent coating operations, optimizing the high-speed running of the curtain coater to enhance production efficiency, minimizing the amount of titanium dioxide in the coating color, and balancing the coated board properties to make them suitable for both offset and flexographic printing. The pilot and mill scale results show that curtain coating has a major positive impact on brightness, while smoothness is improved mainly by the blade coating and calendering conditions. Optimization of base board properties and the blade + curtain + blade concept has resulted in the successful use of 100% recycled fiber to produce base board. The optical, mechanical, and printability properties of the final coated board meet market requirements for both offset and flexographic printing. Machine runnability is excellent at the current speed of 1000 m/min, and titanium dioxide has been eliminated in the coating formulations without affecting the coating coverage. A significant improvement in the total cost of coated white liner production has been achieved, compared to the conventional concept of using virgin fiber in the top ply. Future development will focus on combining low cost with further quality improvements to make linerboard suitable for a wider range of end-use applications, including frozen-food packaging and folding boxboard.

Developmental Disorders in Canada

2020 ◽  
Vol 1 (1) ◽  
Author(s):  
Sarah Palmeter
Keyword(s):  
Public Health ◽  
Developmental Disorders ◽  
Health Agency ◽  
The Public ◽  
Age Of Diagnosis ◽  
High Level ◽  
Project Objectives ◽  
Disability Severity ◽  
Occupational Function ◽  
Improve Health

In the completion of my practicum at the Public Health Agency of Canada (PHAC) this summer, I worked to develop a surveillance knowledge product to support the national surveillance of developmental disorders. This project used Statistics Canada’s 2017 Canadian Survey on Disability to investigate the burden of developmental disorders in Canada. Developmental disorders are conditions with onset in the developmental period. They are associated with developmental deficits and impairments of personal, social, academic, and occupational function. The project objectives are to estimate the prevalence of developmental disorders in Canadians 15 years of age or older, overall and by age and sex, as well as report on the age of diagnosis, disability severity, and disability co-occurrence in those with developmental disorders. The majority of the analysis has been completed and preliminary results completed, which cannot be released prior to PHAC publication. Although not highly prevalent, developmental disorders are associated with a high level of disability in young Canadians. Early detection and interventions have been shown to improve health and social outcomes among affected individuals. Understanding the burden of developmental disorders in Canada is essential to the development of public health policies and services.

Researching the public procurement system: An analysis of winning organizations

2020 ◽  
Vol 16 (5) ◽  
pp. 860-884
Author(s):  
V.G. Kogdenko ◽  
A.A. Sanzharov
Keyword(s):  
Public Procurement ◽  
The Public ◽  
Debt Capital ◽  
Scientific Principles ◽  
General Scientific ◽  
Marketing Information ◽  
High Level ◽  
Return On Sales ◽  
Procurement System ◽  
Social Components

Subject. The article deals with the analysis of suppliers in the public procurement system based on reasonable prequalification parameters. Objectives. The aim is to test the hypothesis about strong reputation characteristics of the winners in the public procurement system and develop a methodology for assessing the reputation of suppliers for prequalification purposes. Methods. We employ general scientific principles and methods of research, like abstraction, generalization of approaches used by domestic and foreign authors for prequalification and assessment of reputation of public procurement participants. Results. To test the hypothesis, we calculated four groups of indicators on corporate, financial, market, and social components of reputation. The methodology was tested on the data obtained from SPARK-Interfax and SPARK-Marketing information resources. Conclusions. The study revealed that not all reputational characteristics of public procurement winners can be regarded as high level. In terms of the corporate component, it is the low level of share capital, indicating the mistrust on the part of owners and their reluctance to invest in the business, and the low percentage of non-current assets. In terms of the market component, it is a low sales growth rate, as well as low return on sales. As to the financial component, it is a low capitalization of winners, low share of long-term debt capital and low credit limit. With respect to the social component, it is a below-average tax burden.

IMPACT OF GOVERNMENT DEBT ON FINANCIAL SECURITY OF UKRAINE

2017 ◽  
Author(s):  
Olena Pikaliuk ◽  
◽  
Dmitry Kovalenko ◽  
Keyword(s):  
Economic Development ◽  
Public Debt ◽  
Positive Impact ◽  
The State ◽  
Financial Security ◽  
State Budget ◽  
The Public ◽  
Debt Security ◽  
The Stability ◽  
The Impact

One of the main criteria for economic development is the size of the public debt and its dynamics. The article considers the impact of public debt on the financial security of Ukraine. The views of scientists on the essence of public debt and financial security of the state are substantiated. An analysis of the dynamics and structure of public debt of Ukraine for 2014-2019. It is proved that one of the main criteria for economic development is the size of public debt and its dynamics. State budget deficit, attracting and using loans to cover it have led to the formation and significant growth of public debt in Ukraine. The volume of public debt indicates an increase in the debt security of the state, which is a component of financial security. Therefore, the issue of the impact of public debt on the financial security of Ukraine is becoming increasingly relevant. The constant growth and large amounts of debt make it necessary to study it, which will have a positive impact on economic processes that will ensure the stability of the financial system and enhance its security.

Anniversary of the first national standards for geodetic instruments

2019 ◽  
Vol 946 (4) ◽  
pp. 20-25
Author(s):  
O. K. Golubkova ◽  
A.I. Spiridonov
Keyword(s):  
Public Service ◽  
Positive Impact ◽  
State Standards ◽  
National Standards ◽  
Technical Level ◽  
Instrument Making ◽  
The Public ◽  
Technical Requirements ◽  
Basic Parameters ◽  
Technical Specifications

State standards on the types, basic parameters of levels and theodolites as well as technical requirements were developed in CNIIGAiK in 1962–1963. The authors indicate the experience of developing the first State standards for geodetic instrument making, the difficulties encountered in developers. In this article the main stages of preparation of State standards, including action algorithm from technical specifications to submissions for the approval of the public service are marked step-by-step. The types of levels and theodolites, and the basic technical characteristics for each type are described. During 55 years the positive impact in the areas of production and application of standardized levels and theodolites, inter alia, streamlining the issuance of standard sizes of devices, increased production and improved their quality and technical level was revealed.

Climate Justice

2018 ◽  
Keyword(s):  
Climate Change ◽  
Sustainable Development Goals ◽  
Climate Justice ◽  
Policy Discourse ◽  
Mary Robinson ◽  
The Public ◽  
Development Goals ◽  
To Come ◽  
Run Up ◽  
High Level

Climate justice requires sharing the burdens and benefits of climate change and its resolution equitably and fairly. It brings together justice between generations and justice within generations. The United Nations Sustainable Development Goals summit in September 2015, and the Conference of Parties to the Framework Convention on Climate Change in Paris in December 2015, brought climate justice center stage in global discussions. In the run up to Paris, Mary Robinson, former president of Ireland and the UN Secretary General’s Special Envoy for Climate Change, instituted the Climate Justice Dialogue. The editors of this volume, an economist and a philosopher, served on the High Level Advisory Committee of the Climate Justice Dialogue. They noted the overlap and mutual enforcement between the economic and philosophical discourses on climate justice. But they also noted the great need for these strands to come together to support the public and policy discourse. This volume is the result.

Sign in / Sign up

Export Citation Format

Share Document