scholarly journals The potential of using agricultural waste: Corn husk for particleboard raw material

Author(s):  
K W Prasetiyo ◽  
L Zalukhu ◽  
L Astari ◽  
Sudarmanto ◽  
F Akbar ◽  
...  
2021 ◽  
Author(s):  
Ramratan Guru ◽  
Anupam Kumar ◽  
Rohit Kumar

This research work has mainly utilized agricultural waste material to make a good-quality composite sheet product of the profitable, pollution free, economical better for farmer and industries. In this study, from corn leaf fibre to reinforced epoxy composite product has been utilized with minimum 35 to maximum range 55% but according to earlier studies, pulp composite material was used in minimum 10 to maximum 27%. Natural fibre-based composites are under intensive study due to their light weight, eco-friendly nature and unique properties. Due to the continuous supply, easy of handling, safety and biodegradability, natural fibre is considered as better alternative in replacing many structural and non-structural components. Corn leaf fibre pulp can be new source of raw material to the industries and can be potential replacement for the expensive and non-renewable synthetic fibre. Corn leaf fibre as the filler material and epoxy as the matrix material were used by changing reinforcement weight fraction. Composites were prepared using hand lay-up techniques by maintaining constant fibre and matrix volume fraction. The sample of the composites thus fabricated was subjected to tensile, impact test for finding the effect of corn husk in different concentrations.


2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Swati Korgaonkar ◽  
Swati Korgaonkar

Adsorption of dyes from the effluent is a well-known and feasible method been used in the industry. In the present work we are using corn husk agricultural waste as a sustainable raw material for synthesizing activated carbon using biopolymer carboxyl methyl cellulose for formation of beads. The beads formed are been used for removal of reactive ultra-orange RGB , acid telon yellow FG 01, basic coracryl red C2B. The surface area of beads is 39.87m2 /g. The maximum adsorption of reactive orange RGB , acid telon yellow and basic coracryl red is 68.25mg/g, 72.54mg/g and 30.21mg/g for 50ml of dye solution. The stock solution 0.4g/l of dye solution was prepared for each dye respectively. The beads formed shows a variable pH from 2 to 12 which is favourable for textile effluent. This is a green approach to use the agricultural waste for waste water treatment.


PeerJ ◽  
2019 ◽  
Vol 6 ◽  
pp. e6186 ◽  
Author(s):  
Ting-Ting Jiang ◽  
Yan Liang ◽  
Xiang Zhou ◽  
Zi-Wei Shi ◽  
Zhi-Jun Xin

Background Sweet sorghum bagasse (SSB), comprising both a dermal layer and pith, is a solid waste generated by agricultural activities. Open burning was previously used to treat agricultural solid waste but is harmful to the environment and human health. Recent reports showed that certain techniques can convert this agricultural waste into valuable products. While SSB has been considered an attractive raw material for sugar extraction and the production of value-added products, the pith root in the SSB can be difficult to process. Therefore, it is necessary to pretreat bagasse before conventional hydrolysis. Methods A thorough analysis and comparison of various pretreatment methods were conducted based on physicochemical and microscopic approaches. The responses of agricultural SSB stem pith with different particle sizes to pretreatment temperature, acid and alkali concentration and enzyme dosage were investigated to determine the optimal pretreatment. The integrated methods are beneficial to the utilization of carbohydrate-based and unknown compounds in agricultural solid waste. Results Acid (1.5−4.5%, v/v) and alkali (5−8%, w/v) reagents were used to collect cellulose from different meshes of pith at 25–100 °C. The results showed that the use of 100 mesh pith soaked in 8% (w/v) NaOH solution at 100 °C resulted in 32.47% ± 0.01% solid recovery. Follow-up fermentation with 3% (v/v) acid and 6.5% (w/v) alkali at 50 °C for enzymolysis was performed with the optimal enzyme ratio. An analysis of the surface topography and porosity before and after pretreatment showed that both the pore size of the pith and the amount of exposed cellulose increased as the mesh size increased. Interestingly, various compounds, including 42 compounds previously known to be present and 13 compounds not previously known to be present, were detected in the pretreatment liquid, while 10 types of monosaccharides, including D-glucose, D-xylose and D-arabinose, were found in the enzymatic solution. The total monosaccharide content of the pith was 149.48 ± 0.3 mg/g dry matter. Discussion An integrated technique for obtaining value-added products from sweet sorghum pith is presented in this work. Based on this technique, lignin and hemicellulose were effectively broken down, amorphous cellulose was obtained and all sugars in the sweet sorghum pith were hydrolysed into monosaccharides. A total of 42 compounds previously found in these materials, including alcohol, ester, acid, alkene, aldehyde ketone, alkene, phenolic and benzene ring compounds, were detected in the pretreatment pith. In addition, several compounds that had not been previously observed in these materials were found in the pretreatment solution. These findings will improve the transformation of lignocellulosic biomass into sugar to create a high-value-added coproduct during the integrated process and to maximize the potential utilization of agricultural waste in current biorefinery processing.


Agronomy ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 2221
Author(s):  
Adila Fazliyana Aili Hamzah ◽  
Muhammad Hazwan Hamzah ◽  
Hasfalina Che Man ◽  
Nur Syakina Jamali ◽  
Shamsul Izhar Siajam ◽  
...  

Pineapple waste accounts for a significant part of waste accumulated in landfill which will further contribute to the release of greenhouse gases. With the rising pineapple demands worldwide, the abundance of pineapple waste and its disposal techniques are a major concern. Exploiting the pineapple waste into valuable products could be the most sustainable way of managing these residues due to their useful properties and compositions. In this review, we concentrated on producing useful products from on-farm pineapple waste and processing waste. Bioenergy is the most suitable option for green energy to encounter the increasing demand for renewable energy and promotes sustainable development for agricultural waste. The presence of protease enzyme in pineapple waste makes it a suitable raw material for bromelain production. The high cellulose content present in pineapple waste has a potential for the production of cellulose nanocrystals, biodegradable packaging and bio-adsorbent, and can potentially be applied in the polymer, food and textile industries. Other than that, it is also a suitable substrate for the production of wine, vinegar and organic acid due to its high sugar content, especially from the peel wastes. The potentials of bioenergy production through biofuels (bioethanol, biobutanol and biodiesel) and biogas (biomethane and biohydrogen) were also assessed. The commercial use of pineapples is also highlighted. Despite the opportunities, future perspectives and challenges concerning pineapple waste utilisation to value-added goods were also addressed. Pineapple waste conversions have shown to reduce waste generation, and the products derived from the conversion would support the waste-to-wealth concept.


Author(s):  
Irina A. Chetvertneva ◽  
Oleg Kh. Karimov ◽  
Galina A. Teptereva ◽  
Natalia S. Tivas ◽  
Eldar M. Movsumzade ◽  
...  

The paper considers the main components and products of wood processing, agricultural waste, pulp and paper industry waste and qualifies them as sources of pentose-containing resource-renewable domestic raw materials. The article describes in detail the structural components of wood as a natural polymer, which contains aromatic and carbohydrate parts. It is noted that these poly-mers are promising as raw materials for the production of useful chemical products. The role of lignin, cellolose and hemicellulose in the design of mechanical and structural properties of wood is considered. The article considers the features of the sulfonation reactions of the lignin monomer unit depending on the pH of the medium: acidic, neutral and alkaline. There are three main reac-tions that occur simultaneously with lignin in the process of wood delignification during sulfite cooking, such as the sulfonation reaction, the hydrolytic destruction reaction, and the condensation reaction. It is shown that the lignin-hemicellulose matrix contains three types of interconnected mesh structures: the lignin itself; a network of covalent bonds of lignin with hemicelluloses, and a network whose structure is obtained due to the hydrogen bond and the forces of the physical inter-action of lignin and hemicelluloses. The features of chemical transformations of the monomeric aromatic link of lignosulfonate – phenylpropane unit in the processes of wood delignification, the main chemical reactions of wood raw material delignification under the conditions of sulfite and neutral-sulfite brews are shown. The method of quantitative determination of monosaccharides in the composition of the carbohydrate part is proposed.


Author(s):  
Asep Bayu Dani Nandiyanto ◽  
Nissa Nur Azizah ◽  
Gabriela Chelvina Santiuly Girsang

Corncob is usually disposed of directly as waste, creating problems in the environment, while it can be converted into valuable materials. This research aimed to evaluate the literature review on briquette production from agricultural waste (using non-binder and cold press with a binder) and the current works on techno-economic analysis, to propose an optimal design for the production of briquette from corncob waste, and to perform a techno-economic analysis based on the selected optimal processing method. The engineering perspective based on stoichiometry and mass balance showed the potential corncob briquette manufacture in both home and large scales due to the possible use of inexpensive and commercially available equipment and raw materials. The economic perspective [based on several economic evaluation factors (i.e., gross profit margin, payback period, break-even point, cumulative net present value, return of investment, internal rate return, and profitability index) under ideal and non-ideal conditions by considering internal (i.e., sales, raw materials, utilities, and variable cost) and external aspects (i.e., tax)] confirmed the prospective development of the project in the large-scale production with a lifetime of more than 18 years. The main issue in the project is the raw material (i.e. tapioca flour), giving the most impact on the project’s feasibility. Even in severe conditions, the project is feasible. The great endurance was also confirmed in the case of a higher tax rate. This study demonstrates the importance of producing corncob-based briquettes for improving the economic value and giving alternatives for problem solvers in the utilization of agricultural waste.


2015 ◽  
Vol 39 (4) ◽  
pp. 348-354 ◽  
Author(s):  
Mário Vanoli Scatolino ◽  
Thiago de Paula Protásio ◽  
Rafael Farinassi Mendes ◽  
Lourival Marin Mendes

Agricultural waste materials are generated in large quantities in Brazil. These can accumulate and cause serious environmental problems. One of the most commonly generated wastes in the brazilian agricultural culture is the maize cob. Being lignocellulosic in nature, the maize cob can find use as the raw material in the production of particleboards mainly concerned with furniture making. Therefore, studies regarding its thermal stability and fire resistance would be interesting. The aim of this study was to evaluate the combustibility and thermal stability of the particleboards produced from maize cob and Pinus oocarpa wood. The percentages in which maize cob was associated with Pinus oocarpa were 0%, 25%, 50%, 75% and 100%. The panels were produced using 8% urea-formaldehyde and 1% paraffin. The pressing cycle parameters included: temperature 150 °C, pressure of 3.92 MPa during 10 min. The combustibility curve analysis showed that the panels containing 25% content of maize cob had higher resistance to combustion. In general, the thermal stability decreased as the wood substitution by maize cob increased.


2018 ◽  
Vol 5 (4) ◽  
pp. 93 ◽  
Author(s):  
Rajeev Ravindran ◽  
Shady Hassan ◽  
Gwilym Williams ◽  
Amit Jaiswal

Agro-industrial waste is highly nutritious in nature and facilitates microbial growth. Most agricultural wastes are lignocellulosic in nature; a large fraction of it is composed of carbohydrates. Agricultural residues can thus be used for the production of various value-added products, such as industrially important enzymes. Agro-industrial wastes, such as sugar cane bagasse, corn cob and rice bran, have been widely investigated via different fermentation strategies for the production of enzymes. Solid-state fermentation holds much potential compared with submerged fermentation methods for the utilization of agro-based wastes for enzyme production. This is because the physical–chemical nature of many lignocellulosic substrates naturally lends itself to solid phase culture, and thereby represents a means to reap the acknowledged potential of this fermentation method. Recent studies have shown that pretreatment technologies can greatly enhance enzyme yields by several fold. This article gives an overview of how agricultural waste can be productively harnessed as a raw material for fermentation. Furthermore, a detailed analysis of studies conducted in the production of different commercially important enzymes using lignocellulosic food waste has been provided.


2019 ◽  
Vol 31 (12) ◽  
pp. 2725-2728
Author(s):  
S.D. Yuwono ◽  
D.A. Iryani ◽  
C. Gusti ◽  
Suharto ◽  
Buhani ◽  
...  

In Indonesia especially in Lampung Province, there are a lot of oil palm empty fruit bunches (OPEFB) as an organic material waste. OPEFB is relatively inexpensive lignocellulose material as raw material of cellulose acetate or acetyl cellulose. In a business to bigger added value out of these natural renewable materials, the production of the acetyl cellulose was performed well by the acetylation of cellulose from OPEFB using different methods. These were extensively characterized using thermogravimetric analysis, Fourier transform infrared spectroscopy and X-ray diffraction. The results indicated that the acetyl cellulose resulted showed similar properties to cotton acetyl cellulose. Degree of substitution of the resultant acetyl cellulose from different methods was improved from 1.86 to 2.60.


2016 ◽  
Vol 675-676 ◽  
pp. 31-34
Author(s):  
Achara Kleawkla ◽  
Pannarai Chuenkruth

Sugar is very important raw material of many industries such as food, beverage and renewable energy. In this research, pretreatment and hydrolysis of agricultural wastes to produce reducing sugars for an ethanol production were investigated. The rice stalk and corn stover from agricultural wastes were firstly pretreated with sodium hydroxide at 121 °C in different time as 20 30 and 40 minutes for removal of lignin. After that, the condition of hydrolysis using sulfuric acid of the pretreated rice stalk and corn stover was optimized. The optimum condition that obtained the highest reducing sugar content from rice stalk and corn stover of 76.12 and 136.25 mg/ml were using 1.0 % v/v sulfuric acid at temperature of 121 °C for a hydrolysis time of 40 minutes. This research made value adding in the industrial processing, decrease environmental problem and reduce global warming crisis by optimized utilization of agricultural waste.


Sign in / Sign up

Export Citation Format

Share Document