scholarly journals Coconut (Cocos nucifera Linn.) Root Extraction and Application as A Fabric Dye with Different Particle Sizes and Extraction Methods

2021 ◽  
Vol 891 (1) ◽  
pp. 012020
Author(s):  
R Pujiarti ◽  
O A Putri
Keyword(s):  
Particle Size ◽  
Ph Value ◽  
Cocos Nucifera ◽  
Extraction Methods ◽  
Natural Dyes ◽  
Raw Material ◽  
Effect Of Temperature ◽  
Extraction Temperature ◽  
Color Fastness ◽  
Color Intensity

Abstract Coconut (Cocos nucifera Linn.) root can be used as an alternative to natural dyes because it contains color pigments in the form of flavonoids. Extraction of natural dyes is affected by several factors such as the type of solvent, extraction temperature, ratio of solvent and raw material, particle size, stirring, and extraction time. This study ware aims to determine combination factor of the particles size and extraction methods of coconut root dye on the characteristics and colour fastness of the fabric products. The coconut root powder in 60 and 40 mesh sizes were extracted by boiling distilled water and maceration with 70 and 95% ethanol, respectively. The coconut root dye was tested for the color characteristics and the dye solution was applied to the fabric and tested for the color fastness. The results showed that the particle size and extraction methods used had a significant effect on color intensity while pH value and color index were not significantly different. The highest color intensity was 2.044, the effect of temperature at 30 was 1.949, and the effect of temperature at 100°C was 1.920. The pH value of the coconut root dye solution is acidic with an average pH of 5.85 while the color names from the test results using NADIM 2021 produce three color categories, namely foxtrot, tobacco brown, and pale gold. Although it is not significantly affected by the combination of material size factors and the extraction methods of coconut root dye solution, the results of the color fastness test tend to meet the standards of SNI 8302-2016 regarding the quality requirements for the fastness of written batik. The average grey scale value for each test is 3-4 (Good enough), the staining scale value is 4-5 (Good), and the sunlight resistance test value is 4 (Good).

Storage Problems of Poplar Chips from Short Rotation Plantations with Special Emphasis on Fungal Development

2012 ◽  
Vol 8 (1) ◽  
pp. 123-132 ◽  
Author(s):  
Zsuzsanna Horváth ◽  
Béla Marosvölgyi ◽  
Christine Idler ◽  
Ralf Pecenka ◽  
Hannes Lenz
Keyword(s):  
Particle Size ◽  
Health Risk ◽  
Dry Matter ◽  
Ph Value ◽  
Wood Chips ◽  
Raw Material ◽  
Special Focus ◽  
Fungal Development ◽  
Short Rotation ◽  
Fungal Particles

Abstract - There are several problems in storing wood chips freshly harvested from short rotation plantations, which result in quality losses as well as in dry matter and energy losses. The factors influencing the degradation of raw material are examined in this paper with special focus on fungal development. An excessive growth of fungi is connected to dry matter losses and also to an increased health risk during raw material handling. The following factors were measured during 6 months storage of poplar wood chips depending on particle size: box temperature, moisture content, pH-value, appearance of fungi in the storage and the concentration of fungal particles in the air. The results show a close connection between particle size, temperature and attack of fungi. During the storage mesophilic and termophilic species of the genera Alternaria, Aspergillus, Cladosporium, Mucor and Penicillium appeared. The concentration of fungal particles is the highest for fine chips and decreases in bigger particles. There was a special focus on the investigation of the properties of coarse chips (G 50), which represent a good compromise between handling, storage losses and health risk due to fungal development.

Utilization of Old Coconut (Cocos nucifera) Husk Waste as Potential Source of Natural Dye and its Dyeing Properties on Cotton Cloth

2021 ◽  
Vol 882 ◽  
pp. 280-286
Author(s):  
Aris Sugih Arto Kholil ◽  
Husniyyah Ulfah Adani ◽  
Annisa’ Mufsihah ◽  
Achmad Chafidz
Keyword(s):  
Cocos Nucifera ◽  
Natural Dye ◽  
Natural Dyes ◽  
Cotton Cloth ◽  
Color Fastness ◽  
Fastness Properties ◽  
Binding Agent ◽  
Binding Agents ◽  
Colored Cotton ◽  
Brown Color

Coconut husk is considered waste and its fibers can be used as a source of natural dyes for textiles. The objective of this research is to obtain natural dyes from old coconut (Cocos nucifera) husk waste fibers through the extraction process. Brown color was produced in the liquid-liquid extraction method. The brown color natural dyes were then used to dye cotton cloth. Three different binding agents were used during the fixation process, i.e. tunjung, naphtol salt, and alum. The coloring results of the natural dye on the cotton cloth were as follow: with alum binding agent the resulting color was light brown (cream), whereas tunjung binding agent produced a greenish brown color, and using napthol salt binding agent produced yellow color. The colored cotton cloths were tested for their color fastness properties against rubbing, soap washing, and sunlight exposure. The measurement scale used was grey scales, which was used to evaluate the color change (color fading) and color staining (color transfer) during color fastness testing. In general, based on the results, the colored cotton cloth using alum as binding agent showed better color fastness properties against rubbing, soap washing, and sunlight exposure compared to the ones using tunjung and naphtol salt binding agents.

Study on Extraction Technology and Stability of Melanin from Banana Peel

2013 ◽  
Vol 815 ◽  
pp. 287-292
Author(s):  
Li Jing Min ◽  
Jing Fen Li
Keyword(s):  
Metal Ions ◽  
Light Source ◽  
Room Temperature ◽  
Ph Value ◽  
Orthogonal Test ◽  
Raw Material ◽  
Banana Peel ◽  
Extraction Temperature ◽  
Solution Ph ◽  
Extraction Technology

[Objectiv The aim is to study the extraction technology of melanin from banana peel, and discuss its stability. [Metho We used banana peel as raw material, the absorbance at 410 nm as the index, extracted melanin by base-acid method, and optimized the extraction technology by the single factor and orthogonal test. Then we discussed the melanins stability at different temperature, light source, pH value, metal ions, antioxidant and reducing agents.[Result The best extraction conditions of melanin is that, hydrochloric acid soak time 5 h, alkaline solution pH value 14, extracting time 20 min, extraction temperature 70 °C, absorbance value about 0.309 A. Melanin from banana peel is stable at high temperature, different light source irradiation, reducing agent coexist; but at room temperature, metal ions and oxidizing agent coexist, it is unstable. [Conclusio This study provided experimental basis for the optimization and development of melanin from banana peel.

scholarly journals Study of Natural Dyes and Pineapple Leaf Fibres Growing Locations within Plant Stems on Dyeing Intensity.

2018 ◽  
Vol 68 ◽  
pp. 01030
Author(s):  
Amin Rejo ◽  
Rizky Tirta Adhiguna ◽  
Debora Geovanni Rajagukguk
Keyword(s):  
Physical Properties ◽  
Leaf Growth ◽  
Natural Dyes ◽  
Raw Material ◽  
Color Intensity ◽  
Caesalpinia Sappan ◽  
Require Quality ◽  
Plant Stem ◽  
Pineapple Leaves

The physical properties of fibres produced from pineapple leaves can vary due to the differences in growing locations within a stem and are influenced by leaf growth age. Pineapple leaf fibres require quality increase, particularly in dyeing. The utilizing of natural dyes ingredients from suji (Dracaena angustifolia) leaves extract, turmeric (Curcuma domestica val) and sappan (Caesalpinia sappan [L.]) wood have friendly impact on the environment. Various types of natural dyes and leaf fibres growing location within the stems of pineapple plants and the color intensity are carefully examined in this study. The diversity of natural dyes used in dyeing influenced the fibres color intensity of pineapple leaves. Pinneaple leaf fibers growing loccation within pineapple stems impacted fibre color lightness intensity, the axis a* and b* colors. The utilization of pineapple leaf fibers from the base of plant stem is more suitable to be used as textile raw material due to its higher lightness level.

scholarly journals Karakteristik Ekstrak Pewarna Alami Bunga Kenop (Gomphrena globosa L.) pada Perlakuan Ukuran Partikel dan Lama Maserasi serta Korelasi Antar Variabel

2020 ◽  
Vol 8 (3) ◽  
pp. 448
Author(s):  
Rahel Br Ginting ◽  
Ni Made Wartini ◽  
Luh Putu Wrasiati
Keyword(s):  
Particle Size ◽  
Data Analysis ◽  
Extraction Process ◽  
Natural Dye ◽  
Natural Dyes ◽  
Color Intensity ◽  
Bivariate Correlation ◽  
Gomphrena Globosa ◽  
Coefficient Corrélation ◽  
Two Factors

Natural dyes from globe amaranth contain betacyanin obtained through the extraction process. This study aims to know the characteristics of natural dye extract globe amaranth on the treatment of particle size and maceration time as well as determine the correlation between total betacyanin with the yield and color intensity of natural dyes extract globe amaranth. This research used two factors namely, particle size (40, 60, and 80 mesh) and maceration time (24, 36, and 48 hours). The data analysis used a bivariate correlation test. The results showed the characteristics of the natural dyes extract globe amaranth on the treatment of particle size and maceration time were as follows: yield 10.61–13.64 percent, total betacyanin 92.42–166.62 mg/100g, brightness level (L*) 18.03–13.09, redness level (a*) 8.29–10.62, and yellowish level (b*) 3.85-7.66. Total betacyanin and yield have a strong but not significant correlation, with a coefficient correlation (r) 0.6631 and coefficient determination (R2) 0.4397. The correlation between total betacyanin with color intensity namely, brightness (L*), redness (a*), and yellowish (b*) has a very strong and correlation with the coefficient correlation (r) respectively -0.872; 0.877; and -8.836 and coefficient determination (R2) respectively 0.7701; 0.7608; 0.7004. Keywords : Gomphrena globosa L., betacyanin, corelation, nature dyes, extraction

scholarly journals PENGARUH SUHU, WAKTU, DAN KADAR AIR BAHAN BAKU TERHADAP PIROLISIS SERBUK PELEPAH KELAPA SAWIT

2017 ◽  
Vol 6 (2) ◽  
pp. 35-40 ◽  
Author(s):  
Seri Maulina ◽  
Feni Sari Putri
Keyword(s):  
Particle Size ◽  
Water Content ◽  
Heating Rate ◽  
Pyrolysis Temperature ◽  
Raw Material ◽  
Effect Of Temperature ◽  
Liquid Smoke ◽  
Temperature Time ◽  
The Way

Palm plantation  produce waste in form of palm midribs in large number. One of the way to handle and increase the value of palm midrib waste is by pyrolysis. The particle size of raw material that used in this study was 23 – 50 mesh. The reduction of raw material size can increase the heating rate of pyrolysis. This study aimed to analyze the effect of temperature, time, and water content of raw material on the yield and pH of liquid smoke. Pyrolysis of palm midrib powder was processed at 150 oC, 200 oC, and 250 oC  with various time was 30 minutes, 60 minutes, and 90 minutes. The study found that the yield of liquid smoke tend to increase with rising pyrolysis temperature and time until the condition when un-condensable gas was produced more so that the increase of pyrolysis temperature and time will further decrease the yield. The highest yield of liquid smoke obtained at 250 oC for 30 minutes, is 20,69%. The best pH of liquid smoke obtained at pyrolysis temperature 250 oC for 90 minutes, is 2,6.

scholarly journals PEMBUATAN BRIKET DARI KULIT KAKAO MENGGUNAKAN PEREKAT KULIT UBI KAYU

2017 ◽  
Vol 6 (3) ◽  
pp. 21-27
Author(s):  
Rosta Natalia Sinaga ◽  
Rosdanelli Hasibuan
Keyword(s):  
Particle Size ◽  
Temperature Variation ◽  
Compaction Pressure ◽  
Strength Test ◽  
Raw Material ◽  
Effect Of Temperature ◽  
Fixed Carbon ◽  
Carbonization Process

This study aims to determine the effect of temperature variation carbonization, carbonization time and adhesive variation to charcoal characteristics of cocoa skin using cassava skin adhesive. Briquette is usually made using binder. Binder can embed charcoal each other to form strong and compact briquettes. Some other variables beside binder that influence the quality of briquettes include raw material, compacting presseure and carbonization process. This research used cocoa leather as raw material with cassava skin leaves as binder. All variables affect the content of fixed carbon of the briquettes that influence the caloricvalue of the briquettes. The caloricvalue is the most important factor for determining the quality of the briquettes. In this research, the highest caloricvalue of the briquettes was 4.375 cal/g. It was achieved when cocoa leather were carbonized by method 1 with compaction pressure of 85 kg/cm2 and binderconcentration of 15% where as raw material with  particle size of 100 mesh. The caloricvalue of the  briquettes was still very low and did not meet the qualification of Indonesian standard for briquettes. Based on the strength test, cassava skin leaves couldn’t be used as briquette’s binder. The produced briquettes that used cassava skin leaves as binder had soft structure and easily destroyed.

scholarly journals Citrus Bioactive Limonoid Extraction using Environment-friendly Hydrotropy

HortScience ◽  
2006 ◽  
Vol 41 (4) ◽  
pp. 1008C-1008
Author(s):  
Deepak Dandekar ◽  
G. K. Jayaprakasha ◽  
Bhimanagouda Patil
Keyword(s):  
Extraction Efficiency ◽  
Design Method ◽  
Maximum Yield ◽  
Extraction Process ◽  
Extraction Methods ◽  
Raw Material ◽  
Extraction Temperature ◽  
Optimum Conditions ◽  
Environment Friendly ◽  
Health Promoting

Citrus consumption has been shown to promote human health due to presence of several bioactive compounds. In the process of understanding the health benefits of citrus, we need to isolate and characterize these compounds. Limonoids are one of such prominent, but lesser-known phytonutrients that have been shown to prevent cancers of the mouth, skin, lung, breast, and colon. With the growing interest in the health-promoting properties of citrus limonoids, the demand for these bioactives has significantly increased. It has been critical to explore environment-friendly extraction methods rather than using hazardous organic solvents. A water-based hydrotropic extraction of limonoid aglycones from sour orange (Citrus aurantium L.) seeds was developed. Two hydrotropes, sodium salicylate (Na-Sal) and sodium cumene sulfonate (Na-CuS), were studied for extraction efficiency using the Box Behnken experiment design method. The extraction efficiency of prominent aglycone limonin was observed depending on hydrotrope concentration, extraction temperature, and percentage of raw material loading. Response Surface Analysis (RSA) of data predicted the optimum conditions for maximum yield. Recovery of aglycones from filtered extract is also easily achieved by mere dilution using water at pH 3 or 7 or by partitioning the extract with dichloromethane. At optimum conditions, limonin yield of 0.46 mg/g seeds in the case of Na-Sal extraction and 0.65 mg/g seeds in the case of Na-CuS extraction was achieved. The results demonstrated that the hydrotropic extraction process of limonoid aglycones has practical commercial importance. This project is based upon work supported by the USDA–CSREES IFAFS #2001 52102 02294 and USDA–CSREES #2005-34402-14401 “Designing Foods for Health” through the Vegetable and Fruit Improvement Center.

scholarly journals EXPLORATION OF THE FACTORS AFFECTING THE SOLUBLE PROTEIN EXTRACTION FROM CULTURED SNAKEHEAD FISH (Channa striata) MUSCLE

2018 ◽  
Vol 55 (5A) ◽  
pp. 74
Author(s):  
Vo Hoang Ngan
Keyword(s):  
Soluble Protein ◽  
Extraction Efficiency ◽  
Protein Extraction ◽  
Ph Value ◽  
Fish Muscle ◽  
Effect Of Temperature ◽  
Extraction Temperature ◽  
Solution Ph ◽  
Factors Affecting ◽  
Optimum Extraction

This study was conducted to identify the factors affecting the soluble protein extraction from cultured snakehead fish muscle, a protein having bioavailability and nutritional value. The study investigated the ratio of fish muscle to water (from 1:1 to 1:5 w/v) and salt (NaCl) concentration (from 0.05 M to 0.25 M) that are suitable for extracting soluble protein effectively. Research has applied a response surface methodology using a central composite design to optimize the effect of temperature and time extraction on soluble protein extraction efficiency. In addition, the study investigated the effect of pH of salt solution (pH 2 to pH 12) on the efficiency of soluble protein extraction from cultured snakehead fish muscle. As a result, the use of 0.15 M NaCl solution with 1:2 ratio of fish muscle to water gave high soluble protein extraction efficiency. The optimum extraction temperature and time were determined as 34.8 °C and 15.2 min respectively, and the appropriate pH value was also determined as pH 10. At the optimum extraction conditions, soluble protein recovery calculated by the amount of soluble protein extraction dividing total protein of fish muscle was 14.39 ± 0.18 %.

scholarly journals The optimization of a conventional extraction of bioactive compounds from Cornus mas by RSM and the determination of favourability factors by GIS technique

2021 ◽  
Vol 49 (2) ◽  
pp. 12307
Author(s):  
Iuliana-Maria ENACHE ◽  
Gigi COMAN ◽  
Sanda ROȘCA ◽  
Camelia VIZIREANU ◽  
Liliana MIHALCEA
Keyword(s):  
Antioxidant Activity ◽  
Bioactive Compounds ◽  
Ethanol Concentration ◽  
Raw Material ◽  
Effect Of Temperature ◽  
Extraction Temperature ◽  
Solvent Concentration ◽  
Relevant Variable ◽  
Cornus Mas ◽  
Gis Technique

Rich in vitamins, polyphenols, carotenoids, carbohydrates, with a high antioxidant activity, cornelian cherry (Cornus mas) is one of the 65 species of Cornaceae family, fruits that are used in food industry, cosmetic industry or homeopathic medicine. The valuable bioactive compounds and the high economical potential of this tree makes suitable to be considered as a raw material to study the optimum extraction conditions in order to maximize the bioactive compounds’ concentration. In this study, the main purpose was to investigate both the favourable and restrictive conditions for Cornus mas using the GIS technique. The Remote Sensing and Geographic Information Systems (GIS) technique indicated the favourability factors for Cornus mas trees in Romania country. The response surface methodology was employed to study the effect of temperature, time and solvent concentration on the flavonoids’ (TFC) and polyphenols (TPC) concentrations and the antioxidant activity values. The maximum concentration of TPC (24.70 mg GAE/g raw material) and TFC (1.36 mg QE/g raw material) were obtained with 60% ethanol concentration at different temperature and time values. The cube model with centred faces for the Box-Behnken central composition revealed the highest value of the concentration of TAA (101.31 mg TE/g raw material) at 100% ethanol concentration, 50 °C extraction temperature and the maximum extraction time of 30 min. The most relevant variable was the solvent concentration and the obtained results suggested that the central-face cube model (86% for TPC, 97% for TFC and 95% antioxidant activity) approximated the experimental data.

Sign in / Sign up

Export Citation Format

Share Document