scholarly journals Palmarosa essential oil encapsulated in chitosan nanoparticles by ionotropic gelation: formulation and characterization

2021 ◽  
Vol 947 (1) ◽  
pp. 012002
Author(s):  
G H Nguyen ◽  
X T Le
Keyword(s):  
Particle Size ◽  
Essential Oil ◽  
Chitosan Nanoparticles ◽  
Average Diameter ◽  
Initial Increase ◽  
Loading Capacity ◽  
Scanning Method ◽  
Ionotropic Gelation ◽  
Chitosan Concentration ◽  
Encapsulation Method

Abstract In this study, chitosan nanoparticles containing palmarosa essential oil (PEO-CNPs) were formed by ionotropic gelation, consisting of two parts: emulsion preparation followed by ionotropic gelation encapsulation with tripolyphosphate ions (TPP) as a crosslinker. The encapsulation method was optimized by varying three parameters, including chitosan concentration, initial oil loading in the emulsion and TPP concentration. The effects of these parameters on the encapsulation efficiency (EE) and loading capacity (LC) were analyzed. EE had an initial increase followed by a decrease in the range of three parameters. However, LC rose with varying initial oil content while it reduced with changing polymer and TPP concentration. The optimum experiment with the highest EE (10.0 g/L of chitosan, 5.0 g/L of TPP and 30.0 g/L PEO) was chosen to analyze the particle size using Dynamic Light Scanning method (DLS). With DLS measurement, the z-average diameter was 235.3 nm, and the particle size distribution was in the range of 100 – 500 nm.

SYNTHESIS OF ELECTROSPRAYED CHITOSAN NANOPARTICLES FOR DRUG SUSTAINED RELEASE

Nano LIFE ◽  
2012 ◽  
Vol 02 (01) ◽  
pp. 1250003 ◽  
Author(s):  
DOAN VAN HONG THIEN ◽  
SHENG WEN HSIAO ◽  
MING HUA HO
Keyword(s):  
Drug Delivery ◽  
Molecular Weight ◽  
Encapsulation Efficiency ◽  
Drug Carrier ◽  
Chitosan Nanoparticles ◽  
Average Diameter ◽  
Loading Capacity ◽  
Model Drug ◽  
Size And Morphology ◽  
Two Stages

Chitosan (CS) nanoparticles for drug delivery were fabricated by an electrospraying method. The effects of CS molecular weight on electrospraying were investigated. The size and morphology of CS particles were strongly influenced by CS molecular weight. Besides, CS concentration, electrical field, acetic acid concentration, and solution feeding rate in the electrospraying process were also studied. To evaluate the potential of electrosprayed CS nanoparticles in drug delivery, indomethacin (ID) was used as a model drug, where the encapsulation efficiency, the loading capacity, and the releasing profiles were identified. The CS-ID spherical nanoparticles were fabricated by the electrospraying technique, with the average diameter of 340 nm. Zeta potential of the ID-CS particles indicated that the particles were stable in the suspension. The encapsulation efficiency (EE) and loading capacity (LC) of ID were higher for 150-kDa CS than for 310-kDa CS. The EE of ID in electrosprayed CS particles was higher than that in particles prepared by other methods. The release profiles revealed that there were two stages for releasing and the long-term delivery could be obtained in the second stage. In summary, this research optimized the electrospraying process for the fabrication of CS nanoparticles and demonstrated the potential of electrosprayed CS nanoparticles as a drug carrier.

scholarly journals Particle Size Affects Concentration-Dependent Cytotoxicity of Chitosan Nanoparticles towards Mouse Hematopoietic Stem Cells

2015 ◽  
Vol 2015 ◽  
pp. 1-5 ◽  
Author(s):  
Siti Sarah Omar Zaki ◽  
Mohd Nazmi Ibrahim ◽  
Haliza Katas
Keyword(s):  
Stem Cells ◽  
Molecular Weight ◽  
Particle Size ◽  
Zeta Potential ◽  
Hematopoietic Stem Cells ◽  
Chitosan Nanoparticles ◽  
Physical Characteristics ◽  
Hematopoietic Stem ◽  
Molecular Weights ◽  
Chitosan Concentration

Chitosan nanoparticles (CSNPs) have been extensively applied in medical and pharmaceutical fields as promising drug delivery systems. Despite that, the safety of CSNPs remains inadequate and needs further investigation, particularly on hematopoietic stem cells (HSCs). CSNPs were prepared by ionic gelation method and later were characterized for their physical characteristics (particle size and zeta potential). Cytotoxicity of CSNPs was assessed by MTT assay. Particle size was highly influenced by chitosan concentration and molecular weight (medium and high molecular weight (MMW and HMW)). Higher chitosan concentration and molecular weight produced larger nanoparticles. Zeta potential of CSNPs was not significantly affected by chitosan concentrations and molecular weights used in the present study. MMW had a better stability than HMW CSNPs as their particle size and zeta potential were not significantly altered after autoclaving. Cytotoxicity of CSNPs was influenced by zeta potential and particle size. On the other hand, chitosan concentration and molecular weight indirectly influenced cytotoxicity by affecting particle size and zeta potential of CSNPs. In conclusion, cytotoxicity of CSNPs was mainly attributed to their physical characteristics and this opens a strategy to ensure the safety of CSNPs applications in stem cell technology.

Zingiber officinale essential oil-loaded chitosan-tripolyphosphate nanoparticles: Fabrication, characterization and in-vitro antioxidant and antibacterial activities

2021 ◽  
pp. 108201322110409
Author(s):  
Mojtaba Yousefi ◽  
Vahid Ghasemzadeh Mohammadi ◽  
Mahdi Shadnoush ◽  
Nasim Khorshidian ◽  
Amir M. Mortazavian
Keyword(s):  
Particle Size ◽  
Essential Oil ◽  
Zeta Potential ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Zingiber Officinale ◽  
Resistant Bacteria ◽  
Scanning Electron Micrographs ◽  
Inhibition Zones

Zingiber officinale essential oil (ZEO) was encapsulated in chitosan nanoparticles at different concentrations using the emulsion-ionic gelation technique and its antioxidant and antibacterial effects were investigated. The results indicated that ZEO level had a significant effect on encapsulation efficiency (EE), loading capacity (LC), particle size and zeta potential. The value obtained for EE, LC, mean particle size and zeta potential were 49.11%–68.32%, 21.16%–27.54%, 198.13–318.26 nm and +21.31–43.57 mV, respectively. According to scanning electron micrographs, the nanoparticles had a spherical shape with some invaginations due to the drying process. The presence of essential oil within the chitosan nanoparticles was confirmed by Fourier transform infrared (FTIR) spectroscopy. In vitro release studies in simulated gastrointestinal fluid (SGF) and simulated intestinal fluid (SIF) indicated an initial burst effect followed by slow release with higher release rate in acidic medium of SGF. ZEO-loaded nanoparticles showed DPPH radical scavenging activity of 20%–61% which increased by raising the ZEO level. Moreover, results of antibacterial activity revealed that Staphylococcus aureus (with inhibition zones of 19–35.19 mm2) and Salmonella typhimurium (with inhibition zones of 9.78–17.48 mm2) were the most sensitive and resistant bacteria to ZEO, respectively. Overall, chitosan nanoparticles can be considered as suitable vehicles for ZEO and improve its stability and solubility.

Evaluation of Physical Properties and Antibacterial Activity of Bioactive Compounds-Loaded Chitosan Nanoparticles

2018 ◽  
Vol 936 ◽  
pp. 3-7 ◽  
Author(s):  
Zormy Nacary Correa-Pacheco ◽  
Silvia Bautista-Baños ◽  
Mónica Hernández-López ◽  
María Luisa Corona-Rangel
Keyword(s):  
Particle Size ◽  
Antibacterial Activity ◽  
Essential Oil ◽  
Zeta Potential ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Bioactive Compounds ◽  
Chitosan Nanoparticles ◽  
Ethanol Extract ◽  
Byrsonima Crassifolia

Bioactive compounds such as essential oils (EO), botanical extracts and natural resins are well known to have beneficial properties. Among these properties are their antibacterial activity. A disadvantage of these compounds is that they are volatile. Therefore, encapsulation is a good way to overcome this problem. In this study, the morphology, particle size distribution, Zeta potential and microbiological activity of chitosan nanoparticles incorporated with three different bioactive compounds having antimicrobial properties: ethanol extract of propolis, thyme essential oil and ethanol extract of Byrsonima crassifolia (L.) Kunth were evaluated. Nanoparticles were synthesized using the nanoprecipitation method. The morphology was observed using transmission electron microscopy (TEM). Also, particle size distribution and Zeta potential were measured. Results show spherical in shape nanoparticles. Thyme essential oil-loaded chitosan nanoparticles (TEO-CSNPs) showed the smallest particle size and highest stability as assessed by Zeta potential measurement, followed in stability by ethanol extract of propolis-loaded chitosan nanoparticles (EEP-CSNPs), ethanol extract of Byrsonima crassifolia (L.) Kunth (EEBC-CSNPs) and finally by chitosan nanoparticles (CSNPs). The antibacterial activity of the bioactive compounds-loaded chitosan nanoparticles was evaluated against Staphylococcus aureus. The highest antibacterial activity was observed for TEO-CSNPs with an inhibition halo (IH) value of 10.54±0.78 mm, followed by EEP-CSNPs (8.10±1.19 mm). EEBC-CSNPs and CSNPs did not show zone of inhibition. Bioactive compounds-loaded chitosan nanoparticles represents a good alternative for bacterial control of food borne pathogens in applications for fruits and vegetables conservation.

scholarly journals Double-Layered Microcapsules Significantly Improve the Long-Term Effectiveness of Essential Oil

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1651 ◽  
Author(s):  
Ting Zhang ◽  
Yu Luo ◽  
Mingxing Wang ◽  
Feng Chen ◽  
Jinkang Liu ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Particle Size ◽  
Essential Oil ◽  
Cotton Fabric ◽  
Encapsulation Efficiency ◽  
Good Thermal Stability ◽  
Surface Method ◽  
Long Time ◽  
Encapsulation Method

In order to improve the long-term effectiveness of essential oil, a double-layered microcapsule was prepared using the inclusion encapsulation method in this study, with β-cyclodextrin as its inner layer and chitosan and sodium alginate as its outer layer. The optimized preparation process was obtained through the response surface method. The morphology, particle size, encapsulation efficiency, thermal stability and sustained release effect of the double-layered microcapsules were characterized. The microcapsules were spherical, with a particle size distribution between 2–6 μm, and had good thermal stability within 250 °C. Their encapsulation efficiency can be up to 80%, and it can continuously release the active ingredients of the essential oil under normal temperature and high temperature conditions for a long time. In order to further examine the application effect of the double-layered microcapsule, it was loaded onto the cotton fabric by the soak-roll method. The finished cotton fabric showed excellent washability and rubbing fastness. They can still maintain a light fragrance naturally for two months. The microcapsules prepared in this study can be potentially applied in sleep aid, antibacterial, mosquito prevention, food science and other related products.

scholarly journals FORMULATION, OPTIMIZATION, AND CHARACTERIZATION OF BIOCOMPATIBLE INHALABLE D-CYCLOSERINE-LOADED ALGINATE-CHITOSAN NANOPARTICLES FOR PULMONARY DRUG DELIVERY

2016 ◽  
pp. 82 ◽  
Author(s):  
Jessy Shaji ◽  
Mahmood Shaikh
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Sustained Release ◽  
Drug Loading ◽  
Chitosan Nanoparticles ◽  
Entrapment Efficiency ◽  
Drug Bioavailability ◽  
Scanning Calorimetry ◽  
Ionotropic Gelation ◽  
Mdr Tb

<p>ABSTRACT<br />Objective: To prepare Nanoparticulate dosage form having improved drug bioavailability and reduced dosing frequency of antitubercular drugs<br />which will helps in improving patient compliance in the treatment of multi-drug resistant tuberculosis (MDR-TB).<br />Methods: Ionotropic gelation method was used to prepare D-cycloserine (D-CS)-loaded alginate-chitosan nanoparticles, and the particles are<br />characterized by their particle size and morphology using particle size analyzer and scanning electron microscopy (SEM). X-ray diffraction (XRD),<br />differential scanning calorimetry (DSC), and Fourier-transformed infrared (FTIR) studies were used to determine drug-polymer interactions and drug<br />entrapment. Entrapment efficiency, drug loading (DL), particle size, and zeta potential of nanoparticles were also studied. The 2<br /> factorial designs of<br />experiments by Design-Expert<br />®<br /> V9 were used to optimize the particle size and entrapment efficiency of nanoparticles.<br />Results: The optimized batch had shown the entrapment efficiency of 98.10±0.24% and DL of 69.32±0.44% with particle size and zeta potential<br />as 344±5 nm and −42±11.40 mV, respectively. DSC, FTIR, and XRD studies confirmed the drug entrapment within nanoparticle matrix. SEM results<br />showed spherical-shaped particles. Sustained release of drug from the nanoparticles was observed for 24 hrs period. Respirable fraction up to<br />52.37±0.7% demonstrates the formulation suitability for deep lung delivery. Lung inflammatory study showed a less inflammatory response.<br />Conclusion: Ionotropic gelation method can be used to prepare biocompatible particles with a high entrapment efficiency, DL, optimum particle size,<br />and controlled release characteristics, which can serve as a convenient delivery system for D-CS and could be a potential alternative to the existing<br />conventional therapy in MDR-TB.<br />Keywords: Nanoparticles, Alginate, Chitosan, Inhalation, Sustained release, Tuberculosis.<br />3</p>

Incorporation of micro/nanoparticles of PCL with essential oil of Cymbopogon nardus in bacterial cellulose

2018 ◽  
Vol 1 (2) ◽  
pp. 37
Author(s):  
Aline Krindges ◽  
Vanusca Dalosto Jahno ◽  
Fernando Morisso
Keyword(s):  
Particle Size ◽  
Particulate Matter ◽  
Essential Oil ◽  
Zeta Potential ◽  
Bacterial Cellulose ◽  
Culture Medium ◽  
Static Culture ◽  
Cymbopogon Nardus ◽  
Cellulose Membranes

Incorporation studies of particles in different substrates with herbal assets growing. The objective of this work was the preparation and characterization of micro/nanoparticles containing cymbopogon nardus essential oil; and the incorporation of them on bacterial cellulose. For the development of the membranes was used the static culture medium and for the preparation of micro/nanoparticles was used the nanoprecipitation methodology. The incorporation of micro/nanoparticles was performed on samples of bacterial cellulose in wet and dry form. For the characterization of micro/nanoparticles were carried out analysis of SEM, zeta potential and particle size. For the verification of the incorporation of particulate matter in cellulose, analyses were conducted of SEM and FTIR. The results showed that it is possible the production and incorporation of micro/nanoparticles containing essential oil in bacterial cellulose membranes in wet form with ethanol.

Study of 5-Fluorouracil Loaded Chitosan Nanoparticles for Treatment of Skin Cancer

2020 ◽  
Vol 14 (3) ◽  
pp. 210-224
Author(s):  
Gayatri Patel ◽  
Bindu K.N. Yadav
Keyword(s):  
Particle Size ◽  
Controlled Release ◽  
Skin Cancer ◽  
Basal Cell Carcinoma ◽  
Cell Carcinoma ◽  
Basal Cell ◽  
Chitosan Nanoparticles ◽  
Entrapment Efficiency ◽  
Fractional Factorial ◽  
Spherical Particles

Background: The purpose of this study was to formulate, characterize and in-vitro cytotoxicity of 5-Fluorouracil loaded controlled release nanoparticles for the treatment of skin cancer. The patents on nanoparticles (US8414926B1), (US61654404A), (WO2007150075A3) etc. helped in the selection polymers and method for the preparation of nanoparticles. Methods: In the present study nanoparticles were prepared by simple ionic gelation method using various concentrations of chitosan and sodium tripolyphosphate (TPP). Several process and formulation parameters were screened and optimized using 25-2 fractional factorial design. The prepared nanoparticles were evaluated for particle size, shape, charge, entrapment efficiency, crosslinking mechanism and drug release study. Results: The optimized 5-Fluorouracil loaded nanoparticle were found with particle size of of 320±2.1 nm, entrapment efficiency of 85.12%± 1.1% and Zeta potential of 29mv±1mv. Scanning electron microscopy and dynamic light scattering technique revealed spherical particles with uniform size. The invitro release profile showed controlled release up to 24 hr. Further study was carried using A375 basal cell carcinoma cell-line to elucidate the mechanism of its cytotoxicity by MTT assay. Conclusion: These results demonstrate that the possibility of delivering 5-Fluorouracil to skin with enhanced encapsulation efficiency indicating effectiveness of the formulation for treatment of basal cell carcinoma type of skin cancer.

Isolasi Dan Karakterisasi Bentonit Alam Menjadi Nanopartikel Monmorillonit

2018 ◽  
Vol 3 (1) ◽  
pp. 12 ◽  
Author(s):  
Zaimahwati Zaimahwati ◽  
Yuniati Yuniati ◽  
Ramzi Jalal ◽  
Syahman Zhafiri ◽  
Yuli Yetri
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Particle Size ◽  
Surface Morphology ◽  
Average Diameter ◽  
Particle Size Analyzer ◽  
Ft Ir ◽  
Scanning Electron ◽  
Sedimentation Processes

<p>Pada penelitian ini telah dilakukan isolasi dan karakterisasi bentonit alam menjadi nanopartikel montmorillonit. Bentonit alam yang digunakan diambil dari desa Blangdalam, Kecamatan Nisam Kabupaten Aceh Utara.  Proses isolasi meliputi proses pelarutan dengan aquades, ultrasonic dan proses sedimentasi. Untuk mengetahui karakterisasi montmorillonit dilakukan uji FT-IR, X-RD dan uji morfologi permukaan dengan Scanning Electron Microscopy (SEM). Partikel size analyzer untuk menganalisis dan menentukan ukuran nanopartikel dari isolasi bentonit alam. Dari hasil penelitian didapat ukuran nanopartikel montmorillonit hasil isolasi dari bentonit alam diperoleh berdiameter rata-rata 82,15 nm.</p><p><em>In this research we have isolated and characterized natural bentonite into montmorillonite nanoparticles. Natural bentonite used was taken from Blangdalam village, Nisam sub-district, North Aceh district. The isolation process includes dissolving process with aquades, ultrasonic and sedimentation processes.  The characterization of montmorillonite, FT-IR, X-RD and surface morphology test by Scanning Electron Microscopy (SEM). Particle size analyzer to analyze and determine the size of nanoparticles from natural bentonite insulation. From the research results obtained the size of montmorillonite nanoparticles isolated from natural bentonite obtained an average diameter of 82.15 nm.</em></p>

Sign in / Sign up

Export Citation Format

Share Document