scholarly journals Selection and the evolution of genetic life cycles.

Genetics ◽  
1993 ◽  
Vol 133 (2) ◽  
pp. 401-410
Author(s):  
C D Jenkins
Keyword(s):  
Genetic Variation ◽  
Life Cycle ◽  
Genetic Control ◽  
Relative Length ◽  
Mortality Rates ◽  
Life Cycles ◽  
Stability Conditions ◽  
Viability Selection ◽  
Trade Offs

Abstract The evolution of haploid and diploid phases of the life cycle is investigated theoretically, using a model where the relative length of haploid and diploid phases is under genetic control. The model assumes that selection occurs in both phases and that fitness in each phase is a function of the time spent in that phase. The equilibrium and stability conditions that allow for all-haploid, all-diploid, or polyphasic life cycles are considered for general survivorship functions. Types of stable life cycles possible depend on the form of the viability selection. If mortality rates are constant, either haploidy or diploidy is the only stable life cycle possible. Departures from constant mortality can give qualitatively different results. For example, when survivorship in each phase is a linear, decreasing function of the time spent in the phase, stable haploid, diploid or polyphasic life cycles are possible. The addition of genetic variation at a coevolving viability locus does not qualitatively affect the outcome with respect to the maintenance of polyphasic cycles but can lead to situations where more than one life cycle is concurrently stable. These results show that trade-offs between the advantages of being diploid and of being haploid may help explain the patterns of life cycles found in nature and that the type of selection may be critical to determining the results.

scholarly journals Natural genetic variation underlying tiller development in barley (Hordeum vulgareL)

2019 ◽  
Author(s):  
Allison M. Haaning ◽  
Kevin P. Smith ◽  
Gina L. Brown-Guedira ◽  
Shiaoman Chao ◽  
Priyanka Tyagi ◽  
...  
Keyword(s):  
Genetic Variation ◽  
Genetic Control ◽  
Morphological Traits ◽  
Agronomic Traits ◽  
Developmental Rate ◽  
Tiller Number ◽  
Natural Genetic Variation ◽  
Trade Offs ◽  
Days To Heading ◽  
Lateral Branches

ABSTRACTIn barley (Hordeum vulgareL.), lateral branches called tillers contribute to grain yield and define shoot architecture, but genetic control of tiller number and developmental rate are not well characterized. The primary objectives of this work were to examine relationships between tiller number and other agronomic and morphological traits and identify natural genetic variation associated with tiller number and rate, and related traits. We grew 768 lines from the USDA National Small Grain Core Collection in the field and collected data over two years for tiller number and rate, and agronomic and morphological traits. Our results confirmed that spike row-type and days to heading are correlated with tiller number, and as much as 28% of tiller number variance is attributed to these traits. In addition, negative correlations between tiller number and leaf width and stem diameter were observed, indicating trade-offs between tiller development and other vegetative growth. Thirty-three quantitative trait loci (QTL) were associated with tiller number or rate. Of these, 40% overlapped QTL associated with days to heading and 22% overlapped QTL associated with spike row-type, further supporting that tiller development is influenced by these traits. Despite this, some QTL associated with tiller number or rate, including the major QTL on chromosome 3H, were not associated with any other traits, suggesting that tiller number can be modified independently of other important agronomic traits. These results enhance our knowledge of the genetic control of tiller development in barley, which is important for optimizing tiller number and rate for yield improvement.

scholarly journals A key role for UV sex chromosomes in the regulation of parthenogenesis in the brown algaEctocarpus

2018 ◽  
Author(s):  
Laure Mignerot ◽  
Komlan Avia ◽  
Remy Luthringer ◽  
Agnieszka P. Lipinska ◽  
Akira F. Peters ◽  
...  
Keyword(s):  
Life Cycle ◽  
Asexual Reproduction ◽  
Sex Chromosome ◽  
Natural Populations ◽  
Life History Evolution ◽  
Life Cycles ◽  
Negative Effects ◽  
Evolutionary Transitions ◽  
Trade Offs ◽  
Sexual And Asexual Reproduction

AbstractAlthough evolutionary transitions from sexual to asexual reproduction are frequent in eukaryotes, the genetic bases of these shifts remain largely elusive. Here, we used classic quantitative trait analysis, combined with genomic and transcriptomic information to dissect the genetic basis of asexual, parthenogenetic reproduction in the brown algaEctocarpus. We found that parthenogenesis is controlled by the sex locus, together with two additional autosomal loci, highlight the key role of the sex chromosome as a major regulator of asexual reproduction. Importantly, we identify several negative effects of parthenogenesis on male fitness, but also different fitness effects between parthenogenesis and life cycle generations, supporting the idea that parthenogenesis may be under both sexual selection and generation/ploidally-antagonistic selection. Overall, our data provide the first empirical illustration, to our knowledge, of a trade-off between the haploid and diploid stages of the life cycle, where distinct parthenogenesis alleles have opposing effects on sexual and asexual reproduction and may contribute to the maintenance of genetic variation. These types of fitness trade-offs have profound evolutionary implications in natural populations and may structure life history evolution in organisms with haploid-diploid life cycles.

GENETIC VARIABILITY FOR DENSITY SENSITIVITY OF THREE COMPONENTS OF FITNESS IN DROSOPHILA MELANOGASTER

Genetics ◽  
1982 ◽  
Vol 101 (2) ◽  
pp. 301-316
Author(s):  
R William Marks
Keyword(s):  
Drosophila Melanogaster ◽  
Genetic Variation ◽  
Life Cycle ◽  
Density Dependence ◽  
Exact Nature ◽  
Mathematical Form ◽  
Fitness Components ◽  
Natural Genetic Variation ◽  
Trade Offs ◽  
Three Components

ABSTRACT This study examines natural genetic variation in density sensitivity of three components of fitness in Drosophila melanogaster using the method of chromosome extraction. Different lines are differentially sensitive to density. The distribution of measures of density sensitivity of chromosomal homozygotes is different from that of random chromosomal heterozygotes for both location and dispersion. Density sensitivity of the components is about as variable as any of the fitness components themselves at fixed densities. The consequences of the exact nature of this density dependence are discussed with respect to the stage of the life cycle at which density dependence occurs, and the mathematical form that it takes. There is no evidence of trade-offs among the components or their density sensitivity.

scholarly journals Seaweed reproductive biology: environmental and genetic controls

2017 ◽  
Vol 60 (2) ◽  
Author(s):  
Xiaojie Liu ◽  
Kenny Bogaert ◽  
Aschwin H. Engelen ◽  
Frederik Leliaert ◽  
Michael Y. Roleda ◽  
...  
Keyword(s):  
Life Cycle ◽  
Current Knowledge ◽  
Natural Populations ◽  
Life Cycles ◽  
Research Papers ◽  
Cycle Progression ◽  
Vast Number ◽  
Endogenous Factors ◽  
Trade Offs ◽  
Excellent Control

AbstractKnowledge of life cycle progression and reproduction of seaweeds transcends pure academic interest. Successful and sustainable seaweed exploitation and domestication will indeed require excellent control of the factors controlling growth and reproduction. The relative dominance of the ploidy-phases and their respective morphologies, however, display tremendous diversity. Consequently, the ecological and endogenous factors controlling life cycles are likely to be equally varied. A vast number of research papers addressing theoretical, ecological and physiological aspects of reproduction have been published over the years. Here, we review the current knowledge on reproductive strategies, trade-offs of reproductive effort in natural populations, and the environmental and endogenous factors controlling reproduction. Given that the majority of ecophysiological studies predate the “-omics” era, we examine the extent to which this knowledge of reproduction has been, or can be, applied to further our knowledge of life cycle control in seaweeds.

scholarly journals Natural Genetic Variation Underlying Tiller Development in Barley (Hordeum vulgare L)

2020 ◽  
Vol 10 (4) ◽  
pp. 1197-1212
Author(s):  
Allison M. Haaning ◽  
Kevin P. Smith ◽  
Gina L. Brown-Guedira ◽  
Shiaoman Chao ◽  
Priyanka Tyagi ◽  
...  
Keyword(s):  
Genetic Variation ◽  
Hordeum Vulgare ◽  
Genetic Control ◽  
Morphological Traits ◽  
Developmental Rate ◽  
Tiller Number ◽  
Hordeum Vulgare L ◽  
Natural Genetic Variation ◽  
Trade Offs ◽  
Days To Heading

In barley (Hordeum vulgare L.), lateral branches called tillers contribute to grain yield and define shoot architecture, but genetic control of tiller number and developmental rate are not well characterized. The primary objectives of this work were to examine relationships between tiller number and other agronomic and morphological traits and identify natural genetic variation associated with tiller number and rate, and related traits. We grew 768 lines from the USDA National Small Grain Collection in the field and collected data over two years for tiller number and rate, and agronomic and morphological traits. Our results confirmed that spike row-type and days to heading are correlated with tiller number, and as much as 28% of tiller number variance was associated with these traits. In addition, negative correlations between tiller number and leaf width and stem diameter were observed, indicating trade-offs between tiller development and other vegetative growth. Thirty-three quantitative trait loci (QTL) were associated with tiller number or rate. Of these, 40% overlapped QTL associated with days to heading and 22% overlapped QTL associated with spike row-type, further supporting that tiller development is associated with these traits. Some QTL associated with tiller number or rate, including the major QTL on chromosome 3H, were not associated with other traits, suggesting that some QTL may be directly related to rate of tiller development or axillary bud number. These results enhance our knowledge of the genetic control of tiller development in barley, which is important for optimizing tiller number and rate for yield improvement.

scholarly journals Does a complex life cycle affect adaptation to environmental change? Genome-informed insights for characterizing selection across complex life cycle

2021 ◽  
Vol 288 (1964) ◽  
Author(s):  
Molly A. Albecker ◽  
Laetitia G. E. Wilkins ◽  
Stacy A. Krueger-Hadfield ◽  
Samuel M. Bashevkin ◽  
Matthew W. Hahn ◽  
...  
Keyword(s):  
Life Cycle ◽  
Empirical Studies ◽  
Life Cycles ◽  
Complex Life Cycle ◽  
Ecological Niches ◽  
Life Stages ◽  
Complex Life Cycles ◽  
High Fecundity ◽  
Trade Offs ◽  
Frequency Changes

Complex life cycles, in which discrete life stages of the same organism differ in form or function and often occupy different ecological niches, are common in nature. Because stages share the same genome, selective effects on one stage may have cascading consequences through the entire life cycle. Theoretical and empirical studies have not yet generated clear predictions about how life cycle complexity will influence patterns of adaptation in response to rapidly changing environments or tested theoretical predictions for fitness trade-offs (or lack thereof) across life stages. We discuss complex life cycle evolution and outline three hypotheses—ontogenetic decoupling, antagonistic ontogenetic pleiotropy and synergistic ontogenetic pleiotropy—for how selection may operate on organisms with complex life cycles. We suggest a within-generation experimental design that promises significant insight into composite selection across life cycle stages. As part of this design, we conducted simulations to determine the power needed to detect selection across a life cycle using a population genetic framework. This analysis demonstrated that recently published studies reporting within-generation selection were underpowered to detect small allele frequency changes (approx. 0.1). The power analysis indicates challenging but attainable sampling requirements for many systems, though plants and marine invertebrates with high fecundity are excellent systems for exploring how organisms with complex life cycles may adapt to climate change.

MERGERS AND ACQUISITIONS AND THEIR CORRELATION WITH THE LIFE CYCLES OF MEMBER COMPANIES ON THE EXAMPLE OF THE RUSSIAN MARKET 2017–2019

2020 ◽  
Vol 1 (10) ◽  
pp. 26-35
Author(s):  
E. A. SHUBINA ◽  
◽  
Yu. A. KOMAROVSKY ◽  
A. V. MERKUSHEV ◽  
◽  
...  
Keyword(s):  
Life Cycle ◽  
Mergers And Acquisitions ◽  
Life Cycles ◽  
Russian Market

The article is devoted to the study of the largest mergers and acquisitions (M&A, “Mergers & Acquisitions”) in Russia for 2017–2019. (the acquired block of shares is not less than 99%). The concept of life cycles of organizations and theoretical aspects of mergers and acquisitions are described. The stages of the life cycle of the merged and reorganized companies, the goals of mergers and acquisitions, depending on the stages of the life cycle are analyzed.

Life cycle of self-propelled machinery with waste generation at its disposal

2020 ◽  
pp. 28-35
Author(s):  
Valeriy S. Gerasimov ◽  
Vladimir I. Ignatov ◽  
Konstantin G. Sovin
Keyword(s):  
Life Cycle ◽  
Life Cycles ◽  
The State ◽  
Research Purpose ◽  
Industrial Complex ◽  
Agricultural Machinery ◽  
Resource Saving ◽  
Secondary Resources ◽  
Branch System ◽  
Additional Funding

According to forecasts for 2022, the number of self-propelled agricultural machinery that will fail will be about 100 thousand units. This will have a significant impact on the overall productivity in the field of agricultural production and will require additional financial costs for effective resource-saving environmental-oriented utilization of agricultural machinery with the maximum recovery of secondary resources in the processing of its components. (Research purpose) The research purpose is considering the main life cycles of machinery, including agricultural, and determining the possibility of obtaining secondary resources in the recycling of components of machinery and equipment. (Materials and methods) The authors found that the establishment of an industry-wide recycling system would allow the reuse of usable and recovered parts obtained from decommissioned equipment, as well as receive additional funding from the sale of secondary resources. The authors have found that for the functioning of the whole system, it is necessary to work with a large amount of data related to the ongoing recycling processes, as well as constantly monitor changes in the state and properties of materials. They also found that the maximum use of digital technology is the only way to combine all these requirements and make the system work. (Results and discussion) The article reviews the key points of the use of life cycle method for equipment, including agricultural, reviews the state of machine and tractor park of agro-industrial complex, shows the possibility of using resource-saving ecologically oriented branch system of recycling of agricultural machinery, as well as the movement of waste and material flows in the processing components of utilized machines. (Conclusion) The article presents recommendations on the possibility of efficient disposal of equipment, including agricultural, with the maximum recovery of secondary resources from recycled waste.

Life cycles of the rhizocephalan Boschmaella japonica Deichmann & Høeg, 1990 (Cirripedia: Chthamalophilidae) and its host barnacle Chthamalus challengeri Hoek, 1883 (Cirripedia: Chthamalidae)

2020 ◽  
Vol 40 (6) ◽  
pp. 825-832 ◽  
Author(s):  
Miku Yabuta ◽  
Jens T Høeg ◽  
Shigeyuki Yamato ◽  
Yoichi Yusa
Keyword(s):  
Life Cycle ◽  
Brood Size ◽  
Life Cycles ◽  
The Body ◽  
Egg Volume ◽  
Size Number ◽  
Rhizocephalan Barnacles ◽  
Western Japan ◽  
Upper Intertidal ◽  
Chthamalus Challengeri

Abstract Although parasitic castration is widespread among rhizocephalan barnacles, Boschmaella japonica Deichmann & Høeg, 1990 does not completely sterilise the host barnacle Chthamalus challengeri Hoek, 1883. As little information is available on the relationships with the host in “barnacle-infesting parasitic barnacles” (family Chthamalophilidae), we studied the life cycles of both B. japonica and C. challengeri and the effects of the parasite on the host reproduction. Specimens of C. challengeri were collected from an upper intertidal shore at Shirahama, Wakayama, western Japan from April 2017 to September 2018 at 1–3 mo intervals. We recorded the body size, number of eggs, egg volume, and the presence of the parasite for each host. Moreover, settlement and growth of C. challengeri were followed in two fixed quadrats. Chthamalus challengeri brooded from February to June. The prevalence of B. japonica was high (often exceeded 10%) from April to July, and was rarely observed from September to next spring. The life cycle of the parasite matched well with that of the host. The parasite reduced the host’s brooding rate and brood size, to the extent that no hosts brooded in 2018.

scholarly journals Advances of 2nd Life Applications for Lithium Ion Batteries from Electric Vehicles Based on Energy Demand

2021 ◽  
Vol 13 (10) ◽  
pp. 5726
Author(s):  
Aleksandra Wewer ◽  
Pinar Bilge ◽  
Franz Dietrich
Keyword(s):  
Life Cycle ◽  
Lithium Ion Batteries ◽  
Electric Vehicles ◽  
Energy Demand ◽  
Lithium Ion ◽  
Life Cycles ◽  
Future Research ◽  
Research Areas ◽  
Study Results ◽  
The Impact

Electromobility is a new approach to the reduction of CO2 emissions and the deceleration of global warming. Its environmental impacts are often compared to traditional mobility solutions based on gasoline or diesel engines. The comparison pertains mostly to the single life cycle of a battery. The impact of multiple life cycles remains an important, and yet unanswered, question. The aim of this paper is to demonstrate advances of 2nd life applications for lithium ion batteries from electric vehicles based on their energy demand. Therefore, it highlights the limitations of a conventional life cycle analysis (LCA) and presents a supplementary method of analysis by providing the design and results of a meta study on the environmental impact of lithium ion batteries. The study focuses on energy demand, and investigates its total impact for different cases considering 2nd life applications such as (C1) material recycling, (C2) repurposing and (C3) reuse. Required reprocessing methods such as remanufacturing of batteries lie at the basis of these 2nd life applications. Batteries are used in their 2nd lives for stationary energy storage (C2, repurpose) and electric vehicles (C3, reuse). The study results confirm that both of these 2nd life applications require less energy than the recycling of batteries at the end of their first life and the production of new batteries. The paper concludes by identifying future research areas in order to generate precise forecasts for 2nd life applications and their industrial dissemination.

Sign in / Sign up

Export Citation Format

Share Document