scholarly journals A novel synthetic-genetic-array–based yeast one-hybrid system for high discovery rate and short processing time

2019 ◽  
Vol 29 (8) ◽  
pp. 1343-1351
Author(s):  
Chung-Shu Yeh ◽  
Zhifeng Wang ◽  
Fang Miao ◽  
Hongyan Ma ◽  
Chung-Ting Kao ◽  
...  
Keyword(s):  
Hybrid System ◽  
Processing Time ◽  
Synthetic Genetic Array ◽  
Short Processing Time

scholarly journals USULAN PENJADWALAN PRODUKSI PRODUK ST 37777 PT EBAKO NUSANTARA PADA DEPARTEMEN SMOOTHMILLING UNTUK MEMINIMASI MAKESPAN

2018 ◽  
Vol 13 (1) ◽  
pp. 61
Author(s):  
Mellysa Asmawar
Keyword(s):  
Production Process ◽  
Processing Time ◽  
Manufacturing Industry ◽  
Job Scheduling ◽  
Makespan Minimization ◽  
Central Java ◽  
Short Processing Time ◽  
Jobshop Scheduling ◽  
Machine Work

AbstrakProses produksi ST 37777 di PT Ebako Nusantara menggunakan jadwal yang didasarkan oleh proses-proses yang dilakukan dengan menggunakan data historis yang telah ada dari proses produksi yang telah dilakukan. PT Ebako Nusantara merupakan industri manufaktur yang bergerak di bidang furnitur yang berlokasi di Terboyo, Semarang, Jawa Tengah. Dalam proses produksi ST 37777, terdapat 11 mesin dan 16 job dimana setiap job memiliki urutan mesin yang berbeda. Penjadwalan yang ada untuk produk tipe ST 37777 dengan tipe jobshop belum menerapkan suatu ketetapan dalam penentuan waktu dan urutan pengerjaan mesin yang efektif sehingga masih banyak job yang selesai terlambat. Untuk itu diperlukan suatu penjadwalan mesin yang efektif sehingga dapat memenuhi waktu produksi pesanan sesuai dengan yang telah disepakati. Penjadwalan jobshop diperlukan untuk memaksimumkan efisiensi dan utilitas sumber daya di lantai produksi. Penentuan jadwal mesin ini bertujuan meminimasi makespan dengan menggunakan Software WINQSB modul job schedulling. Metode yang digunakan adalah metode Short Processing Time. Hasil penjadwalan menggunakan Software WINQSB diperoleh makespan menjadi 15 jam dengan hasil penjadwalan tersebut tidak ada job yang terlambat dan semua job dikerjakan berurutan. AbstractThe production process of ST 37777 in PT Ebako Nusantara uses a schedule based on the processes performed using existing historical data from the production process that has been done. PT Ebako Nusantara is a manufacturing industry engaged in furnitur located in Terboyo, Semarang, Central Java. In the production process ST 37777, there are 11 machines and 16 jobs where each job has a different sequence of machines. The existing scheduling for ST 37777 type product with jobshop type has not been applied a determination in the timing and sequence of effective machine work so that many jobs are finished too late. For that required an effective engine scheduling so that it can meet the production time of orders in accordance with the agreed. Jobshop scheduling is needed to maximize efficiency and resource utilities on the production floor. Determination of this machine schedule aims to minimize the makespan using WINQSB Software job scheduling module. The method used is the method of Short Processing Time. The scheduling result using WINQSB software obtained makespan to 15 hours with scheduling result no job is late and all job done in sequence. Keywords: Jobshop Scheduling; Short Processing Time; Makespan Minimization

scholarly journals PENINGKATAN KAPASITAS PRODUKSI MELALUI PENERAPAN THEORY OF CONSTRAINT, PENJADWALAN MESIN PARALEL DAN BOTTLENECK SCHEDULING PADA PERUSAHAAN SHEET METAL WORK

2013 ◽  
Vol 3 (2) ◽  
Author(s):  
Sonia Nur Indah Suci ◽  
Nora Azmi ◽  
Sumiharni Batubara
Keyword(s):  
Processing Time ◽  
Parallel Machines ◽  
Job Scheduling ◽  
Production Capacity ◽  
Theory Of Constraints ◽  
Job Sequencing ◽  
Short Processing Time ◽  
Current Production ◽  
Scheduling Method ◽  
Theory Of Constraint

<p>This study aims to increase the production capacity of the server rack 08U Type Double ASeries<br />Wallmounted BRI on company X. Current production did not reached the expected target of<br />117 units / week because of the bottleneck workstation. The study began by identifying the bottleneck<br />workstation using the Theory of Constraints (TOC). The result of identification process showed two<br />bottleneck work stations, that are work station Punching and Ovencoating. The production capacity<br />was improved by performing the steps as follows: 1) Add 1 machine at punching station, 2) perform<br />job scheduling on parallel machines at punching station using Short Processing Time (SPT) criteria;<br />3) perform job sequencing on bending station using Weighted Shortest Processing Time (WSPT)<br />criteria; 4 ) adds overtime at ovencoating stations, and 5) implementing bottleneck scheduling method<br />to sequence all jobs. The Results of this study showed that makespan was reduced by 12.03% and<br />production capacity increased by 41.9% so that the production target of 117% can be achieved.</p>

scholarly journals Extraction of thermally stable cellulose nanocrystals in short processing time from waste newspaper by conventional acid hydrolysis

2020 ◽  
Vol 7 (6) ◽  
pp. 065004
Author(s):  
Dan-Thuy Van-Pham ◽  
Thi Yen Nhu Pham ◽  
Minh Chien Tran ◽  
Chanh-Nghiem Nguyen ◽  
Qui Tran-Cong-Miyata
Keyword(s):  
Acid Hydrolysis ◽  
Cellulose Nanocrystals ◽  
Processing Time ◽  
Thermally Stable ◽  
Short Processing Time

A nanogroove-guided slot-die coating technique for highly ordered polymer films and high-mobility transistors

2016 ◽  
Vol 52 (2) ◽  
pp. 358-361 ◽  
Author(s):  
Aung Ko Ko Kyaw ◽  
Lim Siew Lay ◽  
Goh Wei Peng ◽  
Jiang Changyun ◽  
Zhang Jie
Keyword(s):  
Polymer Films ◽  
Processing Time ◽  
High Mobility ◽  
Polymer Chains ◽  
Coating Technique ◽  
Slot Die Coating ◽  
Short Processing Time ◽  
Slot Die

A nanogroove-guided slot-die coating technique has been developed to manipulate the alignment of polymer chains within a short processing time.

scholarly journals Load Curtailment Optimization Using the PSO Algorithm for Enhancing the Reliability of Distribution Networks

Energies ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 3236
Author(s):  
Laura M. Cruz ◽  
David L. Alvarez ◽  
Ameena S. Al-Sumaiti ◽  
Sergio Rivera
Keyword(s):  
Power Systems ◽  
Distribution Systems ◽  
Processing Time ◽  
Optimization Problem ◽  
Pso Algorithm ◽  
Distribution Networks ◽  
Medium Voltage ◽  
Short Processing Time ◽  
Optimal Value ◽  
Load Curtailment

Power systems are susceptible to disturbances due to their nature. These disturbances can cause overloads or even contingencies of greater impact. In case of an extreme situation, load curtailment is considered the last resort for reducing the contingency impact, its activation being necessary to avoid the collapse of the system. However, load shedding systems seldom work optimally and cause either excessive or insufficient reduction of the load. To resolve this issue, the present paper proposes a methodology to enhance the load curtailment management in medium voltage distribution systems using Particle Swarm Optimization (PSO). This optimization seeks to minimize the amount of load to be cut off. Restrictions on the optimization problem consist of the security operation margins of both loading and voltage of the system elements. Heuristic optimization algorithms were chosen, since they are considered an online basis (allowing a short processing time) to solve the formulated load curtailment optimization problem. Best performances regarding optimal value and processing time were obtained using a PSO algorithm, qualifying the technique as the most appropriate for this study. To assess the methodology, the CIGRE MV distribution network benchmark was used, assuming dynamic load profiles during an entire week. Results show that it is possible to determine the optimal unattended power of the system. This way, improvements in the minimization of the expected energy not supplied (ENS) as well as the System Average Interruption Frequency Index (SAIDI) at specific hours of the day were made.

scholarly journals Accelerating Aging of White and Red Wines by the Application of Hydrostatic High Pressure and Maceration with Holm Oak (Quercus ilex) Chips. Influence on Physicochemical and Sensory Characteristics

Foods ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 899
Author(s):  
María Esperanza Valdés ◽  
Rosario Ramírez ◽  
Manuel Alejandro Martínez-Cañas ◽  
Samuel Frutos-Puerto ◽  
Daniel Moreno
Keyword(s):  
High Pressure ◽  
Processing Time ◽  
Quercus Ilex ◽  
Holm Oak ◽  
Red Wines ◽  
White Wines ◽  
Oak Chips ◽  
Short Processing Time ◽  
Potential Alternative ◽  
Related Compounds

Background: The use of holm oak (Quercus ilex) chips as a potential alternative wood and the application of hydrostatic high pressure (HHP) as an alternative technique to accelerate the release to the wine of wood-related compounds within a short processing time were evaluated. Methods: Five treatments were investigated: (i) bottling without any treatment (B); (ii) and (iii) bottling after maceration (5 g/L) of holm oak chips with HHP treatments (400 MPa, 5 and 30 min) (HHP5, HHP30); (iv) bottling after maceration during 45 days with chips (M), and; (v) maceration in tanks without chips (T). The effects of treatments on general parameters, polyphenols, color, and sensorial characteristics of red and white wines were investigated over 180 days. Results: HHP5, HHP30, and M increased the polyphenols content, thus modified the chromatic characteristics regarding B and M treatments of white wines, also the tasters differentiated HHP5, HHP30, and M from B and T. However, these effects were not observed in red wines. Thus, the effect of the wood depends on the type of wine in which it is used. Conclusions: This research contributes to better knowledge about these chips as a new alternative wood species and the use of HHP as a useful technology to accelerate the aging of wines.

scholarly journals RESEARCH OF APPLYING ISF TECHNOLOGY ON PVC PLASTIC SHEET TO MANUFACTURING SOME NORMAL PRODUCTS

2012 ◽  
Vol 15 (1) ◽  
pp. 15-26
Author(s):  
Nang Van Nguyen ◽  
Nam Thanh Nguyen ◽  
Dien Khanh Le ◽  
Binh Thien Nguyen ◽  
Tu Minh Nguyen
Keyword(s):  
Processing Time ◽  
Lower Cost ◽  
Technical Requirement ◽  
Market Demand ◽  
Plastic Sheet ◽  
Short Processing Time ◽  
Plastic Forming ◽  
Forming Methods ◽  
Plastic Products ◽  
Over Time

Market demand is always changing over time especially for plastic products. Therefore it is necessary to create sample models in the meaning of single or small-batch production which is expected with short processing time, lower cost and operating simply but also meet the technical requirement. This paper presents a research of applying ISF process on PVC plastic sheet to manufacturing sample models and small-batch products. There is also a comparison of economic efficiency between ISF technology and traditional plastic forming methods.

Incorporation of Nisin in Poly (Ethylene-Co-Vinyl Acetate) Films by Melt Processing: A Study on the Antimicrobial Properties

2011 ◽  
Vol 74 (7) ◽  
pp. 1137-1143 ◽  
Author(s):  
ROBERTO SCAFFARO ◽  
LUIGI BOTTA ◽  
SANDRA MARINEO ◽  
ANNA MARIA PUGLIA
Keyword(s):  
Mechanical Properties ◽  
Vinyl Acetate ◽  
Food Packaging ◽  
Processing Time ◽  
Antimicrobial Properties ◽  
Melt Processing ◽  
Film Blowing ◽  
Commercial Formulation ◽  
Short Processing Time ◽  
Poly Ethylene

Both industry and academia have shown a growing interest in materials with antimicrobial properties suitable for food packaging applications. In this study, we prepared and characterized thin films of ethylene-co-vinyl acetate (EVA) copolymer with antimicrobial properties. The films were prepared with a film blowing process by incorporating a nisin preparation as an antimicrobial agent in the melt. Two grades of EVA containing 14 and 28% (wt/wt) vinyl acetate (EVA 14 and EVA 28, respectively) and two commercial formulations of nisin with different nominal activities were used. The effect of the nisin concentration also was evaluated. The films with the highest antimicrobial activity were those formulated with nisin at the highest activity and EVA with the highest content of vinyl acetate. The use of the commercial formulation of nisin with high activity in the EVA films allowed reduction in the amount of nisin needed to provide antimicrobial properties. Consequently, the mechanical properties of these films were only slightly inferior to those of the pure polymers. In contrast, films prepared by incorporating more of the nisin with lower activity had poor mechanical properties. The effect of different processing temperatures used in the preparation of the films on the antimicrobial properties of the films also was evaluated. The materials displayed antimicrobial properties even when they were prepared at temperatures as high as 160°C, probably because of the very short processing time (60 to 90 s) required for preparation.

Iridium Silicide Formation by Rapid Thermal Annealing

1994 ◽  
Vol 299 ◽  
Author(s):  
T. Rodriguez ◽  
H. Wolters ◽  
A. Almendra ◽  
J. Sanz-Maudes ◽  
M.F. Da Silva ◽  
...  
Keyword(s):  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Annealing Time ◽  
Electron Spectroscopy ◽  
Auger Electron ◽  
Processing Time ◽  
Rutherford Backscattering Spectrometry ◽  
Silicide Formation ◽  
Furnace Annealing ◽  
Short Processing Time

AbstractIridium silicides formation by rapid thermal annealing (RTA) under vacuum at several temperatures in the range of 350 to 650°C has been investigated. The substrates and the silicide films were analyzed by Rutherford backscattering spectrometry (RBS) and Auger electron spectroscopy (AES). At 350°C, no distinguishable phase was detected for 240 seconds of annealing time. At 400°C, for processing time up to 45 seconds only Ir1Si1 was formed, for longer processing time Ir1Si1.75 was formed too. At higher temperatures even for very short processing time, Ir1Si1.75 was formed. Ir, Ir1Si1 and Ir1Si1.75 were present simultaneously if the iridium film was thick enough and the processing time was long enough too. For thin iridium layers, the Ir1Si1 formed was totally converted to Ir1Si1.75, if the annealing time was long enough. Formation rates were observed to be three to five orders of magnitude faster than the reported for furnace annealing.

Sign in / Sign up

Export Citation Format

Share Document