Removal of Congo red from aqueous solution in single and binary mixture systems using Argan nutshell wood

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mohammed El Khomri ◽  
Noureddine El Messaoudi ◽  
Abdellah Dbik ◽  
Safae Bentahar ◽  
Abdellah Lacherai ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Binary System ◽  
Congo Red ◽  
Isotherm Models ◽  
Single System ◽  
Batch Mode ◽  
Content Type ◽  
Pseudo Second Order ◽  
Electron Microscope Analysis ◽  
Cr Removal

Purpose Argan nutshell wood (ANW) has been used in this study as an agricultural solid waste to remove Congo red (CR) from an aqueous solution in single and mixture binary in the presence of methylene blue (MB) or crystal violet (CV). Design/methodology/approach The ANW was characterized by Fourier transform infrared and scanning electron microscope analysis. The effect of ANW dose (8–40 gL−1), contact time (0–180 min), pH of the solution (4–11) and CR dye concentration (100–500 mgL−1) on CR adsorption was studied in batch mode and evaluated by kinetic and isotherm models in a single system. In the binary system, the CR removal was studied from a CR + MB and CR + CV mixture with different percentages of dyes, ranging from 0% to 100%. Findings The pseudo-second-order and the Langmuir models could best describe the CR sorption onto ANW in a single system. In addition, in the case of the binary system, there is the appearance of a synergistic phenomenon between the CR and the other cationic dyes and the CR adsorption capacity increased until 12.24 mg g-1 and 12.06 mg g-1 in the presence of the MB and CV in the mixture, respectively. Practical implications This study demonstrated that ANW prepared can be suggested as an excellent potential adsorbent to remove dyes from wastewaters from single and mixture systems. Originality/value This study is original.

scholarly journals ADSORPTION CHARACTERISTICS OF ZIZYPHUS JUJUBA SEED SHELL ACTIVATED NANO POROUS CARBON FOR REMOVING COPPER (II) IONS FROM WASTEWATER

2016 ◽  
Vol 4 (12) ◽  
pp. 226-241
Author(s):  
K Veeravelan ◽  
S Arivoli ◽  
V Marimuthu
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Second Order ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Solution Ph ◽  
Batch Mode ◽  
Zizyphus Jujuba ◽  
Pseudo Second Order ◽  
Nano Carbon

In the present study, adsorption of copper (II) ions from aqueous solution by Activated Zizyphus Jujuba shell Nano Carbon was investigated under batch mode. The influence of solution pH, sorbent dose, copper concentration, contact time and temperature was studied. The copper adsorption was favored with maximum adsorption at pH 6.5. Sorption equilibrium time was observed in 60 min. The equilibrium adsorption data were correlated with Langmuir, Freundlich, Temkin, Dubinin-Radushkevich, Hurkins-Jura, Halsay, Radlich-Peterson, Jovanovic and BET isotherm models. The kinetics of the adsorption process was tested by pseudo-first-order, pseudo-second order, Elovich and Intra-particle diffusion models. It was shown that adsorption of copper could be described by the pseudo-second order kinetic model. Thermodynamic parameters such as Gibbs free energy (ΔG0), the enthalpy (ΔH0) and the entropy change of sorption (ΔS0) have also been evaluated and it has been found that the adsorption process was spontaneous, feasible and endothermic in nature. The results indicated that Activated Zizyphus Jujuba shell Nano Carbon can be used as an effective and low-cost adsorbent to remove copper (II) from aqueous solution.

scholarly journals Competitive Adsorption of Congo red in Single and Binary Systems Using a Low-cost Adsorbent

2021 ◽  
Vol 11 (31) ◽  
Author(s):  
Abdur-Rahim A. Giwa ◽  
Isah A. Bello ◽  
Mary A. Oladipo ◽  
Deborah O. Aderibigbe
Keyword(s):  
Aqueous Solution ◽  
Binary System ◽  
Congo Red ◽  
Binary Systems ◽  
Optimum Dose ◽  
Reactive Black 5 ◽  
Single System ◽  
Parkia Biglobosa ◽  
Equilibrium Data ◽  
Single And Binary Systems

Background. Sawdust from Parkia biglobosa was prepared as an adsorbent for the adsorption of dye from aqueous solution. Objectives. The ability of sawdust to adsorb Congo red in a single dye system and binary dye system was examined. Methods. Effects of several variables (pH, contact time, initial dye concentration and adsorbent dose) were investigated and optimum conditions were established. The equilibrium data were subjected to kinetic and isotherm models. Results. Equilibrium time was observed at 600 mins while the optimum dose was 0.2 g and there was an increase in adsorption at low pH. The equilibrium data fitted the Freundlich isotherm model in both systems (coefficient correlation (R2) > 0.9). Harkin-Jura was the worst-fitted (R2 < 0.8). The qm in the single system (21.65) was lower than in BDS (27.17; 34.01). The values of 1/n show the heterogeneity on the surface of sawdust which reduced in the BDS. The increase in qm in the binary system showed that the presence of another dye (Reactive black 5) had a synergistic effect on the adsorption of Congo red. The kinetics of the process followed the pseudo-second-order model both in the single system and one of the binary systems. The dynamics of the process showed that the single system was non-spontaneous at low temperatures, endothermic and increased randomness on the surface of the adsorbent, while in the binary system, the process was exothermic and had little affinity for the adsorbent. Conclusions. Sawdust from Parkia biglobosa is a potential adsorbent for removing Congo red dye from aqueous solution in single and binary systems. Competing Interests. The authors declare no competing financial interests.

Adsorption Characteristics of Phenol in Aqueous Solution by Pinus massoniana Biochar

2013 ◽  
Vol 295-298 ◽  
pp. 1154-1160 ◽  
Author(s):  
Guo Zhi Deng ◽  
Xue Yuan Wang ◽  
Xian Yang Shi ◽  
Qian Qian Hong
Keyword(s):  
Aqueous Solution ◽  
Ph Value ◽  
Pinus Massoniana ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Adsorbent Dosage ◽  
Salt Ions ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The objective of this paper is to investigate the feasibility of phenol adsorption from aqueous solution by Pinus massoniana biochar. Adsorption conditions, including contact time, initial phenol concentration, adsorbent dosage, strength of salt ions and pH, have been investigated by batch experiments. Equilibrium can be reached in 24 h for phenol from 50 to 250 mg• L-1. The optimum pH value for this kind of biochar is 5.0. The amount of phenol adsorbed per unit decreases with the increase in adsorbent dosage. The existence of salt ions makes negligible influence on the equilibrium adsorption capacity. The experimental data is analyzed by the Freundlich and Langmuir isotherm models. Equilibrium data fits well to the Freundlich model. Adsorption kinetics models are deduced and the pseudo-second-order kinetic model provides a good correlation for the adsorbent process. The results show that the Pinus massoniana biochar can be utilized as an effective adsorption material for the removal of phenol from aqueous solution.

Synthesis of metal organic framework modified with carboxylated attapulgite and adsorption properties for organic dye

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Fanhua Wu ◽  
Yuyu Zhang ◽  
Tao Li ◽  
Yongfeng Liu ◽  
Yi Liu ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Hybrid Materials ◽  
Congo Red ◽  
Metal Organic Framework ◽  
Adsorption Efficiency ◽  
Anionic Dyes ◽  
Content Type ◽  
Low Concentration ◽  
Metal Organic ◽  
The Cost

Purpose The purpose of this study was to prepare carboxylated attapulgite (APT-COOH) and then be used as one of the ligands to prepare metal organic framework (MOF) hybrid materials to reduce the cost of MOF materials and improve the dispersed condition of APT. And then the materials were used to enrich anionic dye Congo red from aqueous solution. Design/methodology/approach The MOF hybrid materials were designed by means of facile reflux method rather than hydrothermal method, characterized by Thermogravimetric Analysis (TGA), Fourier Transform Infrared (FTIR) Spectrometer and pore structure. The dispersed degree of APT-COOH in the MOF materials was validated according to adsorption efficiency for Congo red. Findings Due to introduction of APT-COOH, the microenvironment of the MOF materials changed, leading to different adsorption behaviors. Compared to the MOF material without APT-COOH, the adsorption capacities of the hybridized MOF materials with different amounts of APT-COOH introduced increased by 4.58% and 15.55%, respectively, as the initial concentration of Congo red solution of 300 mg/L. Meantime, hybridized MOF materials were suitable to remove Congo red with low concentration, while the MOF material without APT-COOH was appropriate to enrich Congo red with high concentration. Research limitations/implications The microstructure of MOF hybrid materials in detail is the further and future investigation. Practical implications This study will provide a method to reduce the cost of MOF materials and a theoretical support to treat anionic dyes from aqueous solution. Originality/value APT-COOH was prepared and used as one of the ligands to synthesize MOF material to improve the dispersed degree of APT-COOH and reduce the cost of the MOF materials. The adsorption efficiency was greatly enhanced with low concentration of Congo red solution, and the results indicated that hydrogen bonding, electrostatic interaction, and p-p conjugation were involved in the adsorption process. The prepared MOFs materials exhibited excellent adsorption efficiency, which made the present materials highly promising and potentially useful in practical application as adsorbents to enrich anionic dyes such as Congo red from aqueous solution.

scholarly journals Investigation on adsorption capacity of TiO2-P25 nanoparticles in the removal of a mono-azo dye from aqueous solution: A comprehensive isotherm analysis

2014 ◽  
Vol 20 (1) ◽  
pp. 97-107 ◽  
Author(s):  
Mohammad Behnajady ◽  
Shahrzad Yavari ◽  
Nasser Modirshahla
Keyword(s):  
Aqueous Solution ◽  
Crystallite Size ◽  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Correlation Coefficients ◽  
Average Crystallite Size ◽  
Isotherm Models ◽  
Equilibrium Data ◽  
Pseudo Second Order

In this work TiO2-P25 nanoparticles with high surface area have been used as adsorbent for the removal of C.I Acid Red 27 (AR27), as an organic contaminant from aqueous solution. Characteristics of phases and crystallite size of TiO2-P25 nanoparticles were achieved from XRD and the surface area and pore size distribution were obtained from BET and BJH techniques. TiO2-P25 nanoparticles with almost 80% anatase and 20% rutile phases, the average crystallite size of 18 nm, have specific surface area of 56.82 m2 g-1. The effect of various parameters like initial AR27 concentration, pH, contact time and adsorbent dosage has been carried out in order to find desired adsorption conditions. The desired pH for adsorption of AR27 onto TiO2-P25 nanoparticles was 3. The equilibrium data were analyzed with various 2-, 3- and 4-parameter isotherm models. Equilibrium data fitted very well by the 4-parameter Fritz-Schluender model. Results of adsorption kinetics study indicated that the pseudo-second order kinetics provided the best fit with correlation coefficients close to unity.

Kinetic and equilibrium studies of fluoride sorption onto surfactant-modified smectites

Clay Minerals ◽  
2012 ◽  
Vol 47 (4) ◽  
pp. 429-440 ◽  
Author(s):  
S. Gamoudi ◽  
N. Frini-Srasra ◽  
E. Srasra
Keyword(s):  
Aqueous Solution ◽  
Thermodynamic Parameters ◽  
Adsorption Kinetics ◽  
Equilibrium Constants ◽  
Second Order ◽  
Operating Conditions ◽  
Polluted Water ◽  
Isotherm Models ◽  
Fluoride Ions ◽  
Pseudo Second Order

AbstractThe use of organoclays as adsorbents in the remediation of polluted water has been the subject of many recent studies. In the present work, a Tunisian smectite modified with two cationic surfactants was used as an adsorbent to examine the adsorption kinetics, isotherms and thermodynamic parameters of fluoride ions from aqueous solution. Various pH values, initial concentrations and temperatures have been tested. Two simplified kinetic models, first-order and pseudo-second-order, were used to predict the adsorption rate constants. It was found that the adsorption kinetics of fluoride onto modified smectites at different operating conditions can best be described by the pseudo-second-order model. Adsorption isotherms and equilibrium adsorption capacities were determined by the fitting of the experimental data to well known isotherm models including those of Langmuir and Freundlich. The results showed that the Langmuir model appears to fit the adsorption better than the Freundlich adsorption model for the adsorption of fluoride ions onto modified smectites. The equilibrium constants were used to calculate thermodynamic parameters, such as the change of free energy, enthalpy and entropy. Results of this study demonstrated the effectiveness and feasibility of organoclays for the removal of fluoride ions from aqueous solution.

scholarly journals The Equilibrium, Kinetics, and Thermodynamics Studies of the Sorption of Methylene Blue from Aqueous Solution Using Pulverized Raw Macadamia Nut Shells

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Joshua N. Edokpayi ◽  
Samson O. Alayande ◽  
Ahmed Adetoro ◽  
John O. Odiyo
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Surface Area ◽  
Low Cost ◽  
Aqueous Media ◽  
Group Analysis ◽  
Second Order ◽  
Isotherm Models ◽  
Macadamia Nut ◽  
Pseudo Second Order

In this study, the potential for pulverized raw macadamia nut shell (MNS) for the sequestration of methylene blue from aqueous media was assessed. The sorbent was characterized using scanning electron microscopy for surface morphology, functional group analysis was performed with a Fourier-transform infrared spectrometer (FT-IR), and Brunauer–Emmett–Teller (BET) isotherm was used for surface area elucidation. The effects of contact time, sorbent dosage, particle size, pH, and change in a solution matrix were studied. Equilibrium data were fitted using Temkin, Langmuir, and Freundlich adsorption isotherm models. The sorption kinetics was studied using the Lagergren pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion models. The feasibility of the study was established from the thermodynamic studies. A surface area of 2.763 m2/g was obtained. The equilibrium and kinetics of sorption was best described by the Langmuir and the pseudo-second-order models, respectively. The sorption process was spontaneous (−ΔG0=28.72−31.77 kJ/mol) and endothermic in nature (ΔH0=17.45 kJ/mol). The positive value of ΔS0 (0.15 kJ/molK) implies increased randomness of the sorbate molecules at the surface of the sorbent. This study presents sustainable management of wastewater using MNS as a potential low-cost sorbent for dye decontamination from aqueous solution.

scholarly journals Almond Shell-Derived, Biochar-Supported, Nano-Zero-Valent Iron Composite for Aqueous Hexavalent Chromium Removal: Performance and Mechanisms

Nanomaterials ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 198 ◽  
Author(s):  
Yaorong Shu ◽  
Bin Ji ◽  
Baihui Cui ◽  
Yuting Shi ◽  
Jian Wang ◽  
...  
Keyword(s):  
Hexavalent Chromium ◽  
Zero Valent Iron ◽  
Good Effect ◽  
Isotherm Models ◽  
Almond Shell ◽  
Removal Experiments ◽  
Pseudo Second Order ◽  
Nano Zero Valent Iron ◽  
Cr Removal ◽  
Main Factor

Nano-zero-valent iron biochar derived from almond shell (nZVI-ASBC) was used for hexavalent chromium (CR) removal. Experiments showed that pH was the main factor (p < 0.01) that affected the experimental results. At a dosage of 10 mg·L−1 and pH of 2–6, in the first 60 min, nZVI-ASBC exhibited a removal efficiency of 99.8%, which was approximately 20% higher than the removal yield at pH 7–11. Fourier transform infrared spectroscopy results indicated N-H was the main functional group that influenced the chemisorption process. The pseudo second-order dynamics and Langmuir isotherm models proved to be the most suitable. Thermodynamic studies showed that the reaction was exothermic and spontaneous at low temperatures (T < 317 K). Various interaction mechanisms, including adsorption and reduction, were adopted for the removal of Cr(VI) using the nZVI-ASBC composite. The findings showed that the BC-modified nZVI prepared with almond shell exerts a good effect and could be used for the removal of Cr(VI).

scholarly journals Characterization of Residual Biomasses and Its Application for the Removal of Lead Ions from Aqueous Solution

2019 ◽  
Vol 9 (21) ◽  
pp. 4486 ◽  
Author(s):  
Candelaria Tejada-Tovar ◽  
Angel Darío Gonzalez-Delgado ◽  
Angel Villabona-Ortiz
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
High Surface ◽  
High Surface Area ◽  
Freundlich Isotherm ◽  
Mesoporous Structure ◽  
Isotherm Models ◽  
Solution Ph ◽  
Batch Mode ◽  
Suitable Alternative

The removal of water pollutants has been widely addressed for the conservation of the environment, and novel materials are being developed as adsorbent to address this issue. In this work, different residual biomasses were employed to prepare biosorbents applied to lead (Pb(II)) ion uptake. The choice of cassava peels (CP), banana peels (BP), yam peels (YP), and oil palm bagasse (OPB) was made due to the availability of such biomasses in the Department of Bolivar (Colombia), derived from agro-industrial activities. The materials were characterized by ultimate and proximate analysis, Fourier Transform Infrared Spectroscopy (FTIR), Brunauer-Emmett-Teller analysis (BET), Scanning Electron Microscopy (SEM), and Energy Dispersive X-Ray Spectroscopy (EDS) in order to determine the physicochemical properties of bioadsorbents. The adsorption tests were carried out in batch mode, keeping the initial metal concentration at 100 ppm, temperature at 30 °C, particle size at 1 mm, and solution pH at 6. The experimental results were adjusted to kinetic and isotherm models to determine the adsorption mechanism. The remaining concentration of Pb(II) in solution was measured by atomic absorption at 217 nm. The functional groups identified in FTIR spectra are characteristic of lignocellulosic materials. A high surface area was found for all biomaterials with the exception of yam peels. A low pore volume and size, related to the mesoporous structure of these materials, make these bioadsorbents a suitable alternative for liquid phase adsorption, since they facilitate the diffusion of Pb(II) ions onto the adsorbent structure. Both FTIR and EDS techniques confirmed ion precipitation onto adsorbent materials after the adsorption process. The adsorption tests reported efficiency values above 80% for YP, BP, and CP, indicating a good uptake of Pb(II) ions from aqueous solution. The results reported that Freundlich isotherm and pseudo-second order best fit experimental data, suggesting that the adsorption process is governed by chemical reactions and multilayer uptake. The future prospective of this work lies in the identification of alternatives to reuse Pb(II)-contaminated biomasses after heavy metal adsorption, such as material immobilization.

Removal of acetaminophen (ACT) from aqueous solution by using nanosilica adsorbent: experimental study, kinetic and isotherm modeling

2020 ◽  
Vol 49 (1) ◽  
pp. 55-62
Author(s):  
Akbar Eslami ◽  
Zahra Goodarzvand Chegini ◽  
Maryam Khashij ◽  
Mohammad Mehralian ◽  
Marjan Hashemi
Keyword(s):  
Removal Rate ◽  
Synthesis Method ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
Content Type ◽  
Bet Analysis ◽  
Pseudo Second Order

Purpose A nanosilica adsorbent was prepared and characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and BET. Design/methodology/approach The optimum conditions for the highest adsorption performance were determined by kinetic modeling. The adsorbent was used for the adsorption of acetaminophen (ACT), and the parameters affecting the adsorption were discussed like pH, initial concentration, contact time and adsorbent dosage. The adsorbent have been characterized by SEM, XRD and BET analysis. The kinetic models including pseudo-first-order and pseudo-second-order with Langmuir and Freundlich isotherm models were applied to investigate the kinetic and isotherms parameters. Findings The adsorption of ACT increased to around 95% with the increase of nanosilica concentration to 30 g/L. Moreover, the adsorption process of ACT follows the pseudo-second-order kinetics and the Langmuir isotherm with the maximum adsorption capacity of 609 mg/g. Practical implications This study provided a simple and effective way to prepare of nanoadsorbents. This way was conductive to protect environmental and subsequent application for removal of emerging pollutants from aqueous solutions. Originality/value The novelty of the study is synthesizing the morphological and structural properties of nanosilica-based adsorbent (specific surface area, pore volume and size, shape and capability) and improving its removal rate through optimizing the synthesis method; and studying the capability of synthesis of nanosilica-based adsorbent for removal of ACT as a main emerging pharmaceutical water contaminant.

Sign in / Sign up

Export Citation Format

Share Document