Manipulating internal recirculation flow rate on the biological process in wastewater treatment

2020 ◽  
Author(s):  
I. Santin ◽  
R. Vilanova ◽  
C. Pedret ◽  
M. Barbu
Keyword(s):  
Wastewater Treatment ◽  
Flow Rate ◽  
Biological Process ◽  
Recirculation Flow

scholarly journals Global Internal Recirculation Alternative Operation to Reduce Nitrogen and Ammonia Limit Violations and Pumping Energy Costs in Wastewater Treatment Plants

Processes ◽  
2020 ◽  
Vol 8 (12) ◽  
pp. 1606
Author(s):  
Ignacio Santín ◽  
Ramon Vilanova ◽  
Carles Pedret ◽  
Marian Barbu
Keyword(s):  
Wastewater Treatment ◽  
Flow Rate ◽  
Biological Treatment ◽  
Fuzzy Controller ◽  
Wastewater Treatment Plants ◽  
Nitrate Concentration ◽  
Great Influence ◽  
Energy Costs ◽  
Recirculation Flow ◽  
Operational Costs

The internal recirculation plays an important role in different areas of the biological treatment of wastewater treatment plants because it has a great influence on the concentration of pollutants, especially nutrients. A usual manipulation of the internal recirculation flow rate is based on the target of controlling the nitrate concentration in the last anoxic tank. This work proposes an alternative for the manipulation of the internal recirculation flow rate instead of nitrate control, with the objective of avoiding limit violations of nitrogen and ammonia concentrations and reducing operational costs. A fuzzy controller is proposed to achieve it based on the effects of the internal recirculation flow rate in different areas of the biological treatment. The proposed manipulation of the internal recirculation flow rate is compared to the application of the usual nitrate control in an already established and published operation strategy by using the internationally known benchmark simulation model no. 2 as a working scenario. The results show improvements with reductions of 59.40% in ammonia limit violations, 2.35% in total nitrogen limit violations, and 38% in pumping energy costs.

scholarly journals Vibratory membrane separation for wastewater treatment

2018 ◽  
Vol 14 (s1) ◽  
pp. 25-35
Author(s):  
Péter Bor ◽  
József Csanádi ◽  
Gábor Veréb ◽  
Sándor Beszédes ◽  
Zita Šereš ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Shear Rate ◽  
Flow Rate ◽  
Specific Energy ◽  
Membrane Fouling ◽  
Energy Demand ◽  
Membrane Separation ◽  
Permeate Flux ◽  
Recirculation Flow ◽  
Shear Rates

To meet the requirements defined by environmental protection regulations effective wastewater treatment is required to process effluents before discharging them into sewers or living waters. While membrane separation offers a quite advantageous method to reduce the organic load of wastewaters, membrane fouling is still limiting its application in wastewater treatment. In this study, the possibility of membrane fouling reduction by increased shear rates on the surface of the membrane was investigated. 7 and 10 kDa MWCO ultrafiltration and 240 Da nanofiltration membranes were studied, with the use of a laboratory mode Vibratory Shear Enhanced Processing. This work mostly focused on studying the effects of module vibration and recirculation feed flow rate on permeate flux, specific energy demand and membrane rejections. Using the same operation parameters, vibration and non-vibration mode experiments were carried out with high and low recirculation flow rate to have a deeper understanding of the shear rate effects. It can be concluded that higher shear rate had a positive effect on the process: increased shear rate resulted in higher flux, higher overall rejection values, as well as a significantly decreased specific energy demand. By calculating and comparing the shear rates in experiments with different operating parameters, both vibration and nonvibration mode, both low and high recirculation flow rate, we have reached the conclusion that vibration causes a significantly higher shear rate increase than setting the recirculation flow rate high.

Hydrodynamics and oxygen balance in a high-rate algal pond

2000 ◽  
Vol 42 (10-11) ◽  
pp. 349-356 ◽  
Author(s):  
H. El Ouarghi ◽  
B. E. Boumansour ◽  
O. Dufayt ◽  
B. El Hamouri ◽  
J. L. Vasel
Keyword(s):  
Wastewater Treatment ◽  
Flow Rate ◽  
Oxygen Transfer ◽  
Plug Flow ◽  
High Rate ◽  
Oxygen Balance ◽  
Transfer Coefficients ◽  
Recirculation Flow ◽  
Hydrodynamic Parameters ◽  
Photosynthesis And Respiration

As for any other system used in wastewater treatment, it is important to know the mixing characteristics and net oxygen balance in high-rate algal ponds (HRAPs). The design of HRAPs obviously is conducive to plug flow, but with a large recirculation flow rate. The pond's treatment capacity will also depend on the net oxygen balance resulting from photosynthesis and respiration. In order to define an appropriate model describing the oxygen balance in the system, two techniques are respectively used for determining the hydrodynamic parameters and oxygen transfer coefficients of HRAPs.

Изучение отклика дегидрогеназной активности ила на изменение технологических параметров работы аэротенка

2020 ◽  
Author(s):  
N. Zaletova ◽  
S. Zaletov
Keyword(s):  
Wastewater Treatment ◽  
Dehydrogenase Activity ◽  
Biological Treatment ◽  
Biological Process ◽  
Organic Load ◽  
Treatment Processes ◽  
Mode Of Operation ◽  
Concentrated Solution ◽  
Available Information ◽  
Complicated Mechanism

Биологический метод очистки сточных вод представляет собой сложный многокомпонентный процесс, ключевой составляющей которого является работа ферментной системы. Известно, что одним из важнейших ферментов, обеспечивающих биологический процесс, являются дегидрогеназы. Полностью сложнейший механизм действия ферментов до конца пока не раскрыт, однако в практике контроля процессов биологической очистки используется показатель дегидрогеназной активности ила. Результаты исследований позволили дополнить имеющуюся информацию фактическими данными о взаимообусловленности уровня дегидрогеназной активности ила и показателей отдельных технологических параметров биологической очистки. Показано, что режим работы аэротенков (нагрузка на ил, доза активного ила и др.) и величина показателей исходной дегидрогеназной активности и дегидрогеназной активности этого же образца ила со слабо концентрированным раствором (ДАИН2О) связаны между собой и зависят от нагрузки на ил по органическим веществам. Полученные результаты исследования могут быть использованы для контроля биологического процесса очистки сточных вод.The biological method of wastewater treatment is a comprehensive multicomponent process the activities of the enzyme system being the key component of it. It is known that dehydrogenases have been one of the most important enzymes the ensure the biological process. The complicated mechanism of the action of enzymes has not been fully described so far however, in the practice of monitoring biological treatment processes, an indicator of the dehydrogenase activity of sludge is used. The research results provided for supplementing the available information with actual data on the interdependence of the level of dehydrogenase activity of sludge and indicators of individual process parameters of biological treatment. It was shown that the mode of operation of aeration tanks (organic matter load on sludge, dose of activated sludge, etc.) and the values of the initial dehydrogenase activity and dehydrogenase activity of the same sludge sample with weakly concentrated solution (DASН2О) are interconnected and depend on the organic load on sludge. The results of the study can be used to control the biological process of wastewater treatment.The biological method of wastewater treatment is a comprehensive multicomponent process the activities of the enzyme system being the key component of it. It is known that dehydrogenases have been one of the most important enzymes the ensure the biological process. The complicated mechanism of the action of enzymes has not been fully described so far however, in the practice of monitoring biological treatment processes, an indicator of the dehydrogenase activity of sludge is used. The research results provided for supplementing the available information with actual data on the interdependence of the level of dehydrogenase activity of sludge and indicators of individual process parameters of biological treatment. It was shown that the mode of operation of aeration tanks (organic matter load on sludge, dose of activated sludge, etc.) and the values of the initial dehydrogenase activity and dehydrogenase activity of the same sludge sample with weakly concentrated solution (DASН2О) are interconnected and depend on the organic load on sludge. The results of the study can be used to control the biological process of wastewater treatment.

scholarly journals Chemical–Electrochemical Process Concept for Lead Recovery from Waste Cathode Ray Tube Glass

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1546
Author(s):  
Árpád Imre-Lucaci ◽  
Melinda Fogarasi ◽  
Florica Imre-Lucaci ◽  
Szabolcs Fogarasi
Keyword(s):  
Flow Rate ◽  
Current Density ◽  
Complete Recovery ◽  
Electrochemical Process ◽  
Operating Conditions ◽  
General Effect ◽  
Optimal Operating ◽  
Recirculation Flow ◽  
Lead Recovery ◽  
Cathode Ray Tube

This paper presents a novel approach for the recovery of lead from waste cathode-ray tube (CRT) glass by applying a combined chemical-electrochemical process which allows the simultaneous recovery of Pb from waste CRT glass and electrochemical regeneration of the leaching agent. The optimal operating conditions were identified based on the influence of leaching agent concentration, recirculation flow rate and current density on the main technical performance indicators. The experimental results demonstrate that the process is the most efficient at 0.6 M acetic acid concentration, flow rate of 45 mL/min and current density of 4 mA/cm2. The mass balance data corresponding to the recycling of 10 kg/h waste CRT glass in the identified optimal operating conditions was used for the environmental assessment of the process. The General Effect Indices (GEIs), obtained through the Biwer Heinzle method for the input and output streams of the process, indicate that the developed recovery process not only achieve a complete recovery of lead but it is eco-friendly as well.

Photo-degradation of butyl parahydroxybenzoate by using TiO2-supported catalyst

2013 ◽  
Vol 67 (10) ◽  
pp. 2141-2147 ◽  
Author(s):  
Patrick Atheba ◽  
Patrick Drogui ◽  
Brahima Seyhi ◽  
Didier Robert
Keyword(s):  
Flow Rate ◽  
Photocatalytic Oxidation ◽  
Supported Catalyst ◽  
Operating Conditions ◽  
Treatment Efficiency ◽  
Optimal Operating ◽  
Photo Degradation ◽  
Photochemical Process ◽  
Recirculation Flow ◽  
High Treatment

The present work evaluates the potential of the photocatalysis (PC) process for the degradation of butylparaben (BPB). Relatively high treatment efficiency was achieved by comparison to photochemical process. Prior to photocatalytic degradation, adsorption (AD) of BPB occurred on the titanium dioxide (TiO2)-supported catalyst. AD was described by Langmuir isotherm (KL = 0.085 L g−1, qm = 4.77 mg g−1). The influence of angle of inclination of the reactor, pH, recirculation flow rate and initial concentration of BPB were investigated. The PC process applied under optimal operating conditions (recirculation flow rate of 0.15 L min−1, angle of inclination of 15°, pH = 7 and 5 mg L−1 of BPB) is able to oxidize 84.9–96.6% of BPB and to ensure around 38.7% of mineralization. The Langmuir–Hinshelwood kinetic model described well the photocatalytic oxidation of BPB (k = 7.02 mg L−1 h−1, K = 0.364 L mg−1).

Effect of Recirculation Device With Counter Swirl Vane on Performance of High Pressure Ratio Centrifugal Compressor

2011 ◽  
Author(s):  
Hideaki Tamaki
Keyword(s):  
High Pressure ◽  
Mach Number ◽  
Flow Rate ◽  
Centrifugal Compressor ◽  
Pressure Ratio ◽  
Negative Slope ◽  
Tip Leakage Flow ◽  
Recirculation Flow ◽  
Operating Range ◽  
High Pressure Ratio

Centrifugal compressors used for turbochargers need to achieve a wide operating range. The author has developed a high pressure ratio centrifugal compressor with pressure ratio 5.7 for a marine use turbocharger. In order to enhance operating range, two different types of recirculation devices were applied. One is a conventional recirculation device. The other is a new one. The conventional recirculation device consists of an upstream slot, bleed slot and the annular cavity which connects both slots. The new recirculation device has vanes installed in the cavity. These vanes were designed to provide recirculation flow with negative preswirl at the impeller inlet, a swirl counterwise to the impeller rotational direction. The benefits of the application of both of the recirculation devices were ensured. The new device in particular, shifted surge line to a lower flow rate compared to the conventional device. This paper discusses how the new recirculation device affects the flow field in the above transonic centrifugal compressor by using steady 3-D calculations. Since the conventional recirculation device injects the flow with positive preswirl at the impeller inlet, the major difference between the conventional and new recirculation device is the direction of preswirl that the recirculation flow brings to the impeller inlet. This study focuses on two effects which preswirl of the recirculation flow will generate. (1) Additional work transfer from impeller to fluid. (2) Increase or decrease of relative Mach number. Negative preswirl increases work transfer from the impeller to fluid as the flow rate reduces. It increases negative slope on pressure ratio characteristics. Hence the recirculation flow with negative preswirl will contribute to stability of the compressor. Negative preswirl also increases the relative Mach number at the impeller inlet. It moves shock downstream compared to the conventional recirculation device. It leads to the suppression of the extension of blockage due to the interaction of shock with tip leakage flow.

scholarly journals Sensitivity analysis of a municipal wastewater treatment plant model

2019 ◽  
Vol 252 ◽  
pp. 05010
Author(s):  
Paweł Król ◽  
Alberto Gallina ◽  
Michał Lubieniecki ◽  
Tadeusz Uhl ◽  
Tadeusz Żaba
Keyword(s):  
Wastewater Treatment ◽  
Municipal Wastewater ◽  
Treatment Process ◽  
Biological Process ◽  
Treatment Plant ◽  
Numerical Procedure ◽  
Municipal Wastewater Treatment ◽  
Wastewater Treatment Process ◽  
Plant Model ◽  
The Relationship

Waste management is a crucial process to keep the environment in wholesome conditions. The environmental impact of solid waste and wastewater is reduced through construction of appropriate disposal installations. The objective of wastewater treatment in biological reactors is to control the process of biomaterial growth by aerating the sewage content. The process is complex, as depending on a plenty of parameters. In the last decades an effective numerical model, called the Activated Sludge Model (ASM), has been proposed for describing the biological process. The ASM is implemented in the Benchmark Simulation Model (BSM) that simulates the whole wastewater treatment process. The most important parameters in ASM are the kinetic and stoichiometric coefficients. The former describes rate-concentration dependence. The latter characterises the relationship between the components of chemical reactions taking place in the cleaning process. Above parameters are determined by on-site calibration and their importance is relevant during the development of numeric models. This paper aims to examine the influence of kinetic and stoichiometric parameters on the wastewater treatment process of a plant in Płaszów, Kraków. The analysis is carried out by a sample-based numerical procedure. It highlights the ASM parameters playing a major role in the treatment process. Results obtained from the analysis are important for future validation and optimisation processes.

Sign in / Sign up

Export Citation Format

Share Document