Modified Fermentation for Production of Bacterial Cellulose/Polyaniline as Conductive Biopolymer Material

2013 ◽  
Vol 62 (2) ◽  
Author(s):  
Norhayati Pa’e ◽  
Khairul Azly Zahan ◽  
Ida Idayu Muhamad ◽  
Kok Fook Seng
Keyword(s):  
Bacterial Cellulose ◽  
Acetobacter Xylinum ◽  
Operating Conditions ◽  
High Mechanical Strength ◽  
Modified Method ◽  
Conductive Film ◽  
Hydrophilic Material ◽  
Polyaniline Films ◽  
The Relationship ◽  
Film Conductivity

Bacterial cellulose is a pure and highly hydrophilic material with high mechanical strength. Furthermore by adding certain substrates or by manipulating the operating conditions it is possible to change the properties of the bacterial cellulose. The objective of this research is to develop a modified method for fabrication of bacterial cellulose-polyaniline films. Polyaniline was incorporated into bacterial cellulose during fermentation by Acetobacter xylinum in order to produce conductive film. Bacterial cellulose/polyaniline film was synthesized with addition of polyaniline in Rotary-discs reactor during bacterial cellulose formation. The conductivity of film produced was measured and compared. The effects of polyaniline concentration were studied and the relationship between polyaniline concentration and film conductivity were determined.

A pilot web former designed to study retention-formation relationships

2010 ◽  
Vol 25 (2) ◽  
pp. 185-194
Author(s):  
Anna Svedberg ◽  
Tom Lindström
Keyword(s):  
Pilot Scale ◽  
Operating Conditions ◽  
Montmorillonite Clay ◽  
Speed Ratio ◽  
Good Reproducibility ◽  
Total Solids ◽  
Retention Aids ◽  
Solids Content ◽  
Relationship Of ◽  
The Relationship

Abstract A pilot-scale fourdrinier former has been developed for the purpose of investigating the relationship between retention and paper formation (features, retention aids, dosage points, etc.). The main objective of this publication was to present the R-F (Retention and formation)-machine and demonstrate some of its fields of applications. For a fine paper stock (90% hardwood and 10% softwood) with addition of 25% filler (based on total solids content), the relationship between retention and formation was investigated for a microparticulate retention aid (cationic polyacrylamide together with anionic montmorillonite clay). The retention-formation relationship of the retention aid system was investigated after choosing standardized machine operating conditions (e.g. the jet-to-wire speed ratio). As expected, the formation was impaired when the retention was increased. Since good reproducibility was attained, the R-F (Retention and formation)-machine was found to be a useful tool for studying the relationship between retention and paper formation.

scholarly journals Engine Malfunctioning Conditions Identification through Instantaneous Crankshaft Torque Measurement Analysis

2021 ◽  
Vol 11 (8) ◽  
pp. 3522
Author(s):  
Konstantinos-Marios Tsitsilonis ◽  
Gerasimos Theotokatos
Keyword(s):  
Operating Conditions ◽  
Cylinder Pressure ◽  
Dynamics Model ◽  
Engine Model ◽  
Measurement Analysis ◽  
Start Of Injection ◽  
Rate Of Heat Release ◽  
Relationship Of ◽  
Diagnostic Measurement ◽  
The Relationship

In this study a coupled thermodynamics and crankshaft dynamics model of a large two-stroke diesel engine was utilised, to map the relationship of the engine Instantaneous Crankshaft Torque (ICT) with the following frequently occurring malfunctioning conditions: (a) change in Start of Injection (SOI), (b) change in Rate of Heat Release (RHR), (c) change in scavenge air pressure, and (d) blowby. This was performed using frequency analysis on the engine ICT, which was obtained through a series of parametric runs of the coupled engine model, under the various malfunctioning and healthy operating conditions. This process demonstrated that engine ICT can be successfully utilised to identify the distinct effects of malfunctions (c) or (d), as they occur individually in any cylinder. Furthermore by using the same process, malfunctions (a) and (b) can be identified as they occur individually for any cylinder, however there is no distinct effect on the engine ICT among these malfunctions, since their effect on the in-cylinder pressure is similar. As a result, this study demonstrates the usefulness of the engine ICT as a non-intrusive diagnostic measurement, as well as the benefits of malfunctioning conditions mapping, which allows for quick and less resource intensive identification of engine malfunctions.

scholarly journals Improvement Effect of Green Remodeling and Building Value Assessment Criteria for Aging Public Buildings

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1200
Author(s):  
Yong-Joon Jun ◽  
Seung-ho Ahn ◽  
Kyung-Soon Park
Keyword(s):  
High Efficiency ◽  
Energy Performance ◽  
Operating Conditions ◽  
Energy Usage ◽  
Public Buildings ◽  
Value Judgment ◽  
Relationship Analysis ◽  
Improvement Effect ◽  
The Relationship ◽  
Usage Data

The Green Remodeling Project under South Korea’s Green New Deal policy is a government-led project intended to strengthen the performance sector directly correlated with energy performance among various elements of improvement applicable to building remodeling by replacing insulation materials, introducing new and renewable energy, introducing high-efficiency equipment, etc., with public buildings taking the lead in green remodeling in order to induce energy efficiency enhancement in private buildings. However, there is an ongoing policy that involves the application of a fragmentary value judgment criterion, i.e., whether to apply technical elements confined to the enhancement of the energy performance of target buildings and the prediction of improvement effects according thereto, thus resulting in the phenomenon of another important value criterion for green remodeling, i.e., the enhancement of the occupant (user) comfort performance of target buildings as one of its purposes, being neglected instead. In order to accurately grasp the current status of these problems and to promote ‘expansion of the value judgment criteria for green remodeling’ as an alternative, this study collected energy usage data of buildings actually used by public institutions and then conducted a total analysis. After that, the characteristics of energy usage were analyzed for each of the groups of buildings classified by year of completion, thereby carrying out an analysis of the correlation between the non-architectural elements affecting the actual energy usage and the actual energy usage data. The correlation between the improvement performance of each technical element and the actual improvement effect was also analyzed, thereby ascertaining the relationship between the direction of major policy strategies and the actual energy usage. As a result of the relationship analysis, it was confirmed that the actual energy usage is more affected by the operating conditions of the relevant building than the application of individual strategic elements such as the performance of the envelope insulation and the performance of the high-efficiency system. In addition, it was also confirmed that the usage of public buildings does not increase in proportion to their aging. The primary goal of reducing energy usage in target buildings can be achieved if public sector (government)-led green remodeling is pushed ahead with in accordance with biased value judgment criteria, just as in the case of a campaign to refrain from operating cooling facilities in aging public buildings. However, it was possible to grasp through the progress of this study that the remodeling may also result in the deterioration of environmental comfort and stability, such as the numerical value of the indoor thermal environment. The results of this study have the significance of providing basic data for pushing ahead with a green remodeling policy in which the value judgment criteria for aging existing public buildings are more expanded, and it is necessary to continue research in such a direction that the quantitative purpose of green remodeling, which is to reduce energy usage in aging public buildings, and its qualitative purpose, which is to enhance their environmental performance for occupants’ comfort, can be mutually balanced and secured at the same time.

scholarly journals Bacterial Cellulose as a Substrate for Microbial Cell Culture

2014 ◽  
Vol 80 (6) ◽  
pp. 1926-1932 ◽  
Author(s):  
Na Yin ◽  
Thiago M. A. Santos ◽  
George K. Auer ◽  
John A. Crooks ◽  
Piercen M. Oliver ◽  
...  
Keyword(s):  
Cell Culture ◽  
Cell Growth ◽  
Physicochemical Properties ◽  
Stationary Phase ◽  
Bacterial Cellulose ◽  
Growth Rates ◽  
Bacterial Cell ◽  
Acetobacter Xylinum ◽  
Primary Factor ◽  
Nutrient Diffusion

ABSTRACTBacterial cellulose (BC) has a range of structural and physicochemical properties that make it a particularly useful material for the culture of bacteria. We studied the growth of 14 genera of bacteria on BC substrates produced byAcetobacter xylinumand compared the results to growth on the commercially available biopolymers agar, gellan, and xanthan. We demonstrate that BC produces rates of bacterial cell growth that typically exceed those on the commercial biopolymers and yields cultures with higher titers of cells at stationary phase. The morphology of the cells did not change during growth on BC. The rates of nutrient diffusion in BC being higher than those in other biopolymers is likely a primary factor that leads to higher growth rates. Collectively, our results suggest that the use of BC may open new avenues in microbiology by facilitating bacterial cell culture and isolation.

Biosynthesis of Carboxymethylated Bacterial Cellulose Composite for Wound Dressing

2011 ◽  
Vol 685 ◽  
pp. 322-326 ◽  
Author(s):  
Jun Wei Yu ◽  
Xiao Li Liu ◽  
Chang Sheng Liu ◽  
Dong Ping Sun
Keyword(s):  
Bacterial Cellulose ◽  
Wound Dressing ◽  
Culture Medium ◽  
Acetobacter Xylinum ◽  
Water Holding Capacity ◽  
Water Soluble ◽  
Transmission Rates ◽  
Measurement Results ◽  
Water Holding ◽  
Cellulose Composite

A novel bacterial cellulose (BC) composite (carboxymethylated-bacterial cellulose, CM-BC) was synthesized by Acetobacter xylinum by adding water-soluble carboxymethylated cellulose (CMC) in the culture medium. FTIR results showed that CM-BC is obtained by the incorporation of CMC in the network of BC. Water-holding capacity and water vapor transmission rates (WVTR) of CM-BC and BC are determined. The WVTR of CM-BC is comparable to that of BC, but the water-holding capacity of CM-BC is improved compared with BC. Tensile strengths measurement results showed that the fracture stress of CM-BC is higher than that of BC, indicating that CM-BC have more potential wound dressing applications than BC.

Production of quicklime from Ashaka limestone through calcination process

2021 ◽  
Vol 1 (2) ◽  
pp. 041-048
Author(s):  
Benson Chinweuba Udeh
Keyword(s):  
Particle Size ◽  
Critical Value ◽  
Operating Conditions ◽  
Quadratic Model ◽  
Particle Sizes ◽  
Calcination Process ◽  
Process Effects ◽  
Effects Of Temperature ◽  
The Difference ◽  
The Relationship

This study is on the production of quicklime from Ashaka limestone through calcination process. Effects of temperature, particle size and time on quicklime yield were determined. The experiment was carried out at temperatures of 800, 900, 1000, 1100 and 1200 0C, particle sizes of 80mm, 90mm, 100mm, 300mm and 425mm and times of 0.5hr, 1hr, 2hrs, 3hrs and 4hrs. Analyses of the results showed that quicklime was successfully produced from Ashaka limestone through the calcination process. Quadratic model adequately described the relationship between quicklime yield and calcination factors of temperature, particle size and time. Recorded model F-value of 134.35 implies that the model is significant. The predicted R² of 0.9597 is in reasonable agreement with the adjusted R² of 0.9844; the difference is less than the critical value of 0.2. Optimum yield of 73.48% was obtained at optima operating conditions; temperature of 1000 0C, particle size of 90 µm and time of 3 hrs.

Numerical Investigation of Heat Transfer, Fluid Flow and Formation of Emissions in Diesel Engines

2013 ◽  
Author(s):  
Müjdat Firat
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Combustion Engine ◽  
Operating Conditions ◽  
Heat Transfer Fluid ◽  
Nox Emissions ◽  
Combustion Pressure ◽  
Crank Angle ◽  
The Relationship ◽  
Hole Number

The present study has been performed on heat transfer, fluid flow and formation of emissions in a diesel engine by different engine parameters. The analysis aims at an investigation of flow field, heat transfer, combustion pressure and formation of emission by means of numerical simulation which is using as parameter; hole number of injector and crank angle. Numerical simulations are performed using the AVL-FIRE commercial software depending on the crank angle. This software is successfully used in internal combustion engine applications, and its validity has been accepted. In this paper, k-zeta-f is preferred as turbulence model and SIMPLE/PISO used as algorithms. Thus, results are presented with pressure traces, temperature curves and NOx and soot levels for engine operating conditions. In addition, the relationship between the spray behaviors and combustion characteristics including NOx emissions, soot emissions, combustion pressure and temperature were illustrated through this analysis.

scholarly journals Forecasting the properties of linear block-copoliurethanes based on oligoesters of regular structure

2021 ◽  
pp. 4-10
Author(s):  
V.N. Anisimov ◽  
◽  
V.V. Anisimov
Keyword(s):  
Molecular Structure ◽  
Regular Structure ◽  
High Strength ◽  
Operating Conditions ◽  
Properties Of Materials ◽  
Reasonable Choice ◽  
The Relationship ◽  
Tribotechnical Characteristics ◽  
Quality Indexes ◽  
Linear Block

We showed that the development of recommendations for a reasonable choice of linear block copolyurethanes that would be optimal for given operating conditions is still intuitive and does not consider the features of the molecular structure and the nature of initial components. We suggested a new scientifically grounded approach to the creation of linear block-copolyurethanes with increased wear resistance in relation to strength, deformation, thermophysical and tribotechnical characteristics. To simplify analysis of the properties of the studied materials, a mathematical model was developed, which describes the relationship between all considered properties of materials and their structure. We proposed to assess the relationship between structure and properties of the investigated materials by using quality indexes. Maximum values of quality indexes, depending on the operating conditions, correspond to different contents of hard blocks (Pc), and, consequently, to different molecular structure of the studied polyurethanes. Thus, it is reasonable to use block-copolyurethanes based on OBGA500 with a maximum content of hard blocks (Рс>60%) for operating conditions where it is necessary to provide high strength characteristics. Polyurethanes synthesized with the formation of clusters of hard blocks in the range of 45–55% are recommended for the use as wear-resistant materials.

Relating Surface Roughness to Subsurface Stress

2005 ◽  
Author(s):  
A. Martini ◽  
S. B. Liu ◽  
B. Escoffier ◽  
Q. Wang
Keyword(s):  
Surface Roughness ◽  
Stress Field ◽  
Point Contact ◽  
Surface Characteristics ◽  
Operating Conditions ◽  
Surface Design ◽  
Dry Contact ◽  
Subsurface Stress ◽  
The Relationship ◽  
Machined Surfaces

Understanding and anticipating the effects of surface roughness on subsurface stress in the design phase can help ensure that performance and life requirements are satisfied. The specific approach taken in this work to address the goal of improved surface design is to relate surface characteristics of real, machined surfaces to subsurface stress fields for dry contact. This was done by digitizing machined surfaces, simulating point contact numerically, calculating the corresponding subsurface stress field, and then relating stress results back to the surface. The relationship between surface characteristics and subsurface stress is evaluated using several different approaches including analyses of trends identified through stress field visualization and extraction of statistical data. One such approach revealed a sharp transition between cases in which surface characteristics dominated the stress field and those in which bulk, or global contact effects dominated the stress. This transition point was found to be a function of the contact operating conditions, material properties, and most interestingly, the roughness of the surface.

Sign in / Sign up

Export Citation Format

Share Document