Vibration Suppression Using Electromagnetic Resonant Shunt Damper

2008 ◽  
Vol 130 (4) ◽  
Author(s):  
Tsuyoshi Inoue ◽  
Yukio Ishida ◽  
Masaki Sumi
Keyword(s):  
Optimal Design ◽  
Experimental Analysis ◽  
Vibration Suppression ◽  
Mechanical Energy ◽  
Voice Coil Motor ◽  
Electrical Energy ◽  
Electromagnetic Actuator ◽  
Resonant Shunt ◽  
Shunt Circuit

An electromagnetic actuator has the property to convert mechanical energy to electrical energy and vice versa. In this study, an electromagnetic resonant shunt damper, consisting of a voice coil motor with an electric resonant shunt circuit, is proposed. The optimal design of the shunt circuit is obtained theoretically for this electromagnetic resonant shunt damper. Furthermore, the effects of parameter errors of the elements of the electromagnetic resonant shunt damper are also investigated. The applicability of the theoretical findings for the proposed damper is justified by the experimental analysis.

Control of Structural Vibration Using Shunt Piezoelectric Materials

2013 ◽  
Vol 303-306 ◽  
pp. 3-6
Author(s):  
Qi Bo Mao
Keyword(s):  
Piezoelectric Materials ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Structural Vibration ◽  
Switching Circuit ◽  
Structural Vibration Control ◽  
Pulse Switching ◽  
Piezoelectric Patch ◽  
Base Structure ◽  
Shunt Circuit

In this study, structural vibration control using semi-active shunt piezoelectric damping circuits is presented. A piezoelectric patch with an electrical shunt circuit is bonded to a base structure. When the structure vibrates, the piezoelectric patch strains and transforms the mechanical energy of the structure into electrical energy, which can be effectively dissipated by the shunt circuit. Hence, the shunt circuit acts as a means of extracting mechanical energy from the base structure. In this study, a pulse-switching circuit is imposed as the semi-active shunt piezoelectric damping to reduce the structural vibration. The switch-law for the pulse-switching circuit is discussed in detail, and the detailed numerical calculations are given and discussed. It is found that the pulse-switching circuit is more stable than passive piezoelectric circuit (such as RL series circuit) with regard to structural stiffness variations.

scholarly journals Adaptive and Robust Operation with Active Fuzzy Harvester under Nonstationary and Random Disturbance Conditions

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3913
Author(s):  
Yushin Hara ◽  
Keisuke Otsuka ◽  
Kanjuro Makihara
Keyword(s):  
Output Voltage ◽  
Vibration Suppression ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Random Disturbance ◽  
Threshold Strategy ◽  
Vibration Energy Harvester ◽  
Switching Strategy ◽  
Nonstationary Vibration ◽  
High Output Voltage

The objective of this paper is to amplify the output voltage magnitude from a piezoelectric vibration energy harvester under nonstationary and broadband vibration conditions. Improving the transferred energy, which is converted from mechanical energy to electrical energy through a piezoelectric transducer, achieved a high output voltage and effective harvesting. A threshold-based switching strategy is used to improve the total transferred energy with consideration of the signs and amplitudes of the electromechanical conditions of the harvester. A time-invariant threshold cannot accomplish effective harvesting under nonstationary vibration conditions because the assessment criterion for desirable control changes in accordance with the disturbance scale. To solve this problem, we developed a switching strategy for the active harvester, namely, adaptive switching considering vibration suppression-threshold strategy. The strategy adopts a tuning algorithm for the time-varying threshold and implements appropriate intermittent switching without pre-tuning by means of the fuzzy control theory. We evaluated the proposed strategy under three realistic vibration conditions: a frequency sweep, a change in the number of dominant frequencies, and wideband frequency vibration. Experimental comparisons were conducted with existing strategies, which consider only the signs of the harvester electromechanical conditions. The results confirm that the presented strategy achieves a greater output voltage than the existing strategies under all nonstationary vibration conditions. The average amplification rate of output voltage for the proposed strategy is 203% compared with the output voltage by noncontrolled harvesting.

scholarly journals OPTIMAL PIEZOELECTRIC SHUNT DAMPER USING ENHANCED SYNTHETIC INDUCTOR: SIMULATION AND EXPERIMENTAL VALIDATION

2022 ◽  
Vol 23 (1) ◽  
pp. 424-433
Author(s):  
Muhammad Nazri Suhaimi ◽  
Azni Nabela Wahid ◽  
Nor Hidayati Diyana Nordin ◽  
Khairul Affendy Md Nor
Keyword(s):  
Cantilever Beam ◽  
Mechanical Energy ◽  
Vibration Reduction ◽  
Electrical Energy ◽  
Maximum Energy ◽  
Electrical Circuit ◽  
Structural Vibration ◽  
In Series ◽  
Piezoelectric Shunt ◽  
Shunt Circuit

Piezoelectric material has the ability to convert mechanical energy to electrical energy and vice versa, making it suitable for use as an actuator and sensor. When used as a controller in sensor mode, the piezoelectric transducer is connected to an external electrical circuit where the converted electrical energy will be dissipated through Joule heat; also known as piezoelectric shunt damper (PSD). In this work, a PSD is used to dampen the first resonance of a cantilever beam by connecting its terminal to an RL shunt circuit configured in series. The optimal resistance and inductance values for maximum energy dissipation are determined by matching the parameters to the first resonant frequency of the cantilever beam, where R = 78.28 k? and L = 2.9 kH are found to be the optimal values. To realize the large inductance value, a synthetic inductor is utilized and here, the design is enhanced by introducing a polarized capacitor to avoid impedance mismatch. The mathematical modelling of a cantilever beam attached with a PSD is derived and simulated where 70% vibration reduction is seen in COMSOL. From experimental study, the vibration reduction obtained when using the piezoelectric shunt circuit with enhanced synthetic inductor is found to be 67.4% at 15.2 Hz. Results from this study can be used to improve PSD design for structural vibration control at targeted resonance with obvious peaks. ABSTRAK: Material piezoelektrik mempunyai keupayaan mengubah tenaga mekanikal kepada tenaga elektrik dan sebaliknya, di mana ia sesuai digunakan sebagai penggerak dan pengesan. Apabila digunakan sebagai alat kawalan dalam mod pengesan, piezoelektrik disambung kepada litar elektrik luaran di mana tenaga elektrik yang ditukarkan akan dibebaskan sebagai haba Joule; turut dikenali sebagai peredam alihan piezoelektrik (PSD). Kajian ini menggunakan PSD sebagai peredam resonan pertama pada palang kantilever dengan menyambungkan terminal kepada litar peredam RL bersiri. Rintangan optimal dan nilai aruhan bagi tenaga maksimum yang dibebaskan terhasil dengan membuat padanan parameter pada frekuensi resonan pertama palang kantilever, di mana R = 78.28 k? dan L = 2.9 kH adalah nilai optimum. Bagi merealisasikan nilai aruhan besar, peraruh buatan telah digunakan dan di sini, rekaan ini ditambah baik dengan memperkenalkan peraruh polaris bagi mengelak ketidakpadanan impedans. Model matematik palang kantilever yang bersambung pada PSD telah diterbit dan disimulasi, di mana 70% getaran berkurang pada COMSOL. Hasil dapatan eksperimen ini menunjukkan pengurangan getaran yang terhasil menggunakan litar peredam piezoelektrik bersama peraruh buatan menghasilkan 67.4% pada 15.2 Hz. Hasil dapatan kajian ini dapat digunakan bagi membaiki rekaan PSD berstruktur kawalan getaran iaitu pada resonan tumpuan di puncak ketara.

Tunable Piezoelectric Cantilever Beams for Energy Harvesting

Aerospace ◽  
2006 ◽  
Author(s):  
David Charnegie ◽  
Changki Mo ◽  
Amanda A. Frederick ◽  
William W. Clark
Keyword(s):  
Cantilever Beam ◽  
Electromechanical Coupling ◽  
Mechanical Energy ◽  
Piezoelectric Element ◽  
Electrical Energy ◽  
Vibration Source ◽  
Frequency Range ◽  
Piezoelectric Cantilever ◽  
Tip Mass ◽  
Shunt Circuit

Over the past several years, there has been increasing interest in harvesting energy from ambient vibrations in the environment by converting mechanical energy into electrical energy. A popular method is to use a piezoelectric cantilever beam. In order to harvest the most energy with the device, the beam's fundamental mode must be excited. However, this is not always possible due to manufacturing of the device or fluctuations in the vibration source. By being able to change the frequencies of the beam, the device can be more effective in harvesting energy. In this paper, a model for a three layered piezoelectric cantilever beam utilizing a shunt tuning circuit will be presented. The fundamental frequency of a cantilever beam is dependent on the stiffness and mass of the beam. Either adding a tip mass to the end of the beam or increasing the dimensions of the beam can alter the mass. The stiffness of the beam is a function of the geometry, mechanical properties, and the electromechanical coupling of the piezoelectric element. In this paper we prepare the use of a piezoelectric layer with an attached shunt circuit for tuning its stiffness, and thus the beam frequency. The piezoelectric coefficients of this layer and its shunt circuit determine the amount of electromechanical coupling. By varying the shunt circuit, the beam can be tuned to a certain frequency. This paper presents a study of the effects additional harvesting and tuning layers have on the amount of tuning and generated power in the beam. These additional layers will add more piezoelectric material as well as mass to the beam and therefore there will be a balance between the amount of harvested energy and the tunable frequency range. By quantifying the effects of these parameters, it will be easier to design a harvester to be used in a particular frequency range as well as to produce a certain level of power.

Passive Damping Augmentation Using Macro-Fiber Composite Actuators

2002 ◽  
Author(s):  
Kazuhiko Adachi ◽  
Gyuhae Park ◽  
Daniel J. Inman
Keyword(s):  
Vibration Suppression ◽  
Fiber Composite ◽  
Structural Vibration ◽  
Vibration Absorber ◽  
Single Degree Of Freedom ◽  
Cantilevered Beam ◽  
Macro Fiber Composite ◽  
Resonant Shunt ◽  
Structural Vibration Suppression ◽  
Shunt Circuit

This paper aims at presenting the structural vibration-suppression capability of the recently developed Macro-Fiber Composite (MFC) actuator as a passive piezoelectric absorber using an inductive resonant shunt circuit. The resistance and inductance of the series RL shunt circuit are designed by the analogy with the single-degree-of-freedom mechanical damped vibration absorber and by using the maximum power transfer theorem of the electric network. Experimental test of a simple cantilevered beam demonstrates that the MFC actuator has excellent capability of improving the dynamic response of the beam as a piezoelectric damping system. The damping enhancement performance of the MFC actuator is superior to that of the conventional monolithic PZT actuator.

scholarly journals Analysis and Numerical Evaluation of H∞ and H2 Optimal Design Schemes for an Electromagnetic Shunt Damper

2019 ◽  
Vol 142 (2) ◽  
Author(s):  
Wai Kei Ao ◽  
Paul Reynolds
Keyword(s):  
Optimal Design ◽  
Coupling Effect ◽  
Dynamic Properties ◽  
Electromagnetic Coupling ◽  
Optimization Technique ◽  
Engineering Structures ◽  
Electromagnetic Damping ◽  
Circuit Components ◽  
Resonant Shunt ◽  
Shunt Circuit

Abstract The electromagnetic coupling effect can generate electromagnetic damping to suppress disturbance, which can be utilized for vibration serviceability control in civil engineering structures. An electrodynamic actuator is used as a passive electromagnetic damper (EMD). Ideally, the EMD is assumed to be attached between the ground and the structure. The kinetic energy of the vibrating structure can be converted to electrical energy to activate the electromagnetic damping. To induce appropriate damping, the two terminals of the damper need to be closed and cascaded with a resonant shunt circuit as an electromagnetic shunt damper (EMSD). In this study, an resistance–inductance–capacitance (RLC) oscillating circuit is chosen. For determination of optimal circuit components and comparing against the tuned mass damper (TMD), existing H∞ design formulae are applied. This work extends this with a detailed development of an H2 robust optimization technique. The dynamic properties of a footbridge structure are then selected and used to verify the EMSD optimal design numerically. The vibration suppression performance is analytically equivalent to the dynamic characteristic of the TMD and has feasible installation and better damping enhancement. To further evaluate the potential application of the EMSD, multi-vibration mode manipulation via connecting multiple RLC resonant shunt circuits is adopted. The multiple RLC shunt circuit connecting to EMD is an alternative to the single mode control of a traditional TMD. Therefore, the EMSD can, in principle, effectively achieve suppression of single and multiple vibration modes.

A Model for Ultrasonic Testing Conical Transducer and Optimal Design

2011 ◽  
Vol 467-469 ◽  
pp. 800-805
Author(s):  
Chao Lu ◽  
Wei Xu
Keyword(s):  
Numerical Modeling ◽  
Wave Propagation ◽  
Optimal Design ◽  
Finite Difference Method ◽  
Ultrasonic Testing ◽  
Mechanical Energy ◽  
Ultrasonic Transducer ◽  
Electrical Energy ◽  
Angle Of Incidence ◽  
Line Contact

In this paper, a numerical modeling of contact conical transducers is discussed in conjunction with wave propagation analyses by a finite difference method (FDM). Although transducers are the devices to convert electrical energy into mechanical energy and vice versa, attention in this paper is paid mostly to the study of characteristics and parameters of cones and wedges influencing their performance. Cones and wedges inserted between an ultrasonic transducer and the specimen provide the transducer with enhanced capability for point or line contact with the specimen. We study the effect of the dimensions, shape and aperture on the frequency response and the angle of incidence of the wave. Through the testing transducer modeling, some conclusions have been drawn from the analysis, which is useful to as the guideline and criteria for an optimum conical wedge design.

Reduction of structural vibrations with the piezoelectric stacks ring

2020 ◽  
Vol 64 (1-4) ◽  
pp. 729-736
Author(s):  
Jincheng He ◽  
Xing Tan ◽  
Wang Tao ◽  
Xinhai Wu ◽  
Huan He ◽  
...  
Keyword(s):  
Vibration Control ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Structural Vibrations ◽  
Rotor Systems ◽  
Fea Model ◽  
Piezoelectric Stacks ◽  
Shunt Damping ◽  
Reduction Effect ◽  
Euler Bernoulli Beam

It is known that piezoelectric material shunted with external circuits can convert mechanical energy to electrical energy, which is so called piezoelectric shunt damping technology. In this paper, a piezoelectric stacks ring (PSR) is designed for vibration control of beams and rotor systems. A relative simple electromechanical model of an Euler Bernoulli beam supported by two piezoelectric stacks shunted with resonant RL circuits is established. The equation of motion of such simplified system has been derived using Hamilton’s principle. A more realistic FEA model is developed. The numerical analysis is carried out using COMSOL® and the simulation results show a significant reduction of vibration amplitude at the specific natural frequencies. Using finite element method, the influence of circuit parameters on lateral vibration control is discussed. A preliminary experiment of a prototype PSR verifies the PSR’s vibration reduction effect.

Design of a slender turning cutting tool via a vibration absorber equipped with piezoelectric ceramic

2021 ◽  
pp. 107754632110144
Author(s):  
Yiqing Yang ◽  
Haoyang Gao ◽  
Qiang Liu
Keyword(s):  
Piezoelectric Ceramic ◽  
Cutting Tool ◽  
Vibration Suppression ◽  
Equations Of Motion ◽  
Electrical Energy ◽  
Diameter Ratio ◽  
Vibration Absorber ◽  
Machined Surface ◽  
Structural Part ◽  
Machined Surface Roughness

Turning cutting tool with large length–diameter ratio has been essential when machining structural part with deep cavity and in-depth hole features. However, chatter vibration is apt to occur with the increase of tool overhang. A slender turning cutting tool with a length–diameter ratio of 7 is developed by using a vibration absorber equipped with piezoelectric ceramic. The vibration absorber has dual functions of vibration transfer to the absorber mass and vibration conversion to the electrical energy via the piezoelectric effect. Equations of motion are established considering the dual damping from the piezoelectric ceramic and rubber gasket. The equivalent damping of piezoelectric ceramic is derived, and the geometries are optimized to achieve optimal vibration suppression. The modal analysis demonstrates that the cutting tool with the vibration absorber can reach 80.1% magnitude reduction. Machining tests are carried out in the end. The machining acceleration and machined surface roughness validate the vibration suppression of the VA, and the output voltage by the piezoelectric ceramic demonstrates the ability of vibration sensing.

Research of vibration and crack propagation controls on an asymmetrical cracked rotor

2021 ◽  
pp. 107754632199822
Author(s):  
Jun Liu ◽  
Zhu Han ◽  
Rong Hu
Keyword(s):  
Crack Propagation ◽  
Vibration Suppression ◽  
Control Method ◽  
Element Model ◽  
Electromagnetic Actuator ◽  
Contact Method ◽  
Cracked Rotor ◽  
Mapping Model ◽  
Differential Control ◽  
Opening And Closing

To investigate vibration characteristics and delay crack propagations of an asymmetric cracked rotor, the 3D finite element model of the rotor system with a nonlinear contact method is established. Resonance characteristics of the asymmetrical rotor without a crack and within different locations of a crack are investigated systematically. Numerical results show that a crack affects vibration frequencies and the unstable region of the rotor. Meanwhile, an improved proportional integral differential control method with the electromagnetic actuator is used to accomplish the delay crack propagation and the vibration suppression. Based on the mapping model of opening and closing states of a crack, the effects of rotational speeds, an unbalance, and asymmetries of the rotor are discussed in detail. Experimental results show that vibrations and the breathing behavior of cracks in the rotor with the electromagnetic actuator can be suppressed, and the effectiveness of the proposed mapping model of opening and closing states of a crack is verified.

Sign in / Sign up

Export Citation Format

Share Document