scholarly journals Pelvic Construct Prediction of Trabecular and Cortical Bone Structural Architecture

2018 ◽  
Vol 140 (9) ◽  
Author(s):  
Dan T. Zaharie ◽  
Andrew T. M. Phillips
Keyword(s):  
Cortical Bone ◽  
Structural Model ◽  
Thickness Distribution ◽  
Bone Adaptation ◽  
The Body ◽  
Lower Limbs ◽  
Fe Model ◽  
Adaptation Algorithm ◽  
Modeling Framework ◽  
Good Agreement

The pelvic construct is an important part of the body as it facilitates the transfer of upper body weight to the lower limbs and protects a number of organs and vessels in the lower abdomen. In addition, the importance of the pelvis is highlighted by the high mortality rates associated with pelvic trauma. This study presents a mesoscale structural model of the pelvic construct and the joints and ligaments associated with it. Shell elements were used to model cortical bone, while truss elements were used to model trabecular bone and the ligaments and joints. The finite element (FE) model was subjected to an iterative optimization process based on a strain-driven bone adaptation algorithm. The bone model was adapted to a number of common daily living activities (walking, stair ascent, stair descent, sit-to-stand, and stand-to-sit) by applying onto it joint and muscle loads derived using a musculoskeletal modeling framework. The cortical thickness distribution and the trabecular architecture of the adapted model were compared qualitatively with computed tomography (CT) scans and models developed in previous studies, showing good agreement. The sensitivity of the model to changes in material properties of the ligaments and joint cartilage and changes in parameters related to the adaptation algorithm was assessed. Changes to the target strain had the largest effect on predicted total bone volumes. The model showed low sensitivity to changes in all other parameters. The minimum and maximum principal strains predicted by the structural model compared to a continuum CT-derived model in response to a common test loading scenario showed good agreement with correlation coefficients of 0.813 and 0.809, respectively. The developed structural model enables a number of applications such as fracture modeling, design, and additive manufacturing of frangible surrogates.

scholarly journals A Comparative Study of Continuum and Structural Modelling Approaches to Simulate Bone Adaptation in the Pelvic Construct

2019 ◽  
Author(s):  
Dan Tudor Zaharie ◽  
Andrew T.M. Phillips
Keyword(s):  
Structural Model ◽  
Bone Adaptation ◽  
Bone Architecture ◽  
Fe Model ◽  
Structural Modelling ◽  
Imaging Data ◽  
Modelling Framework ◽  
Sit To Stand ◽  
Iterative Adaptation ◽  
Modelling Approaches

This study presents the development of a number of finite element (FE) models of the pelvis using different continuum and structural modelling approaches. Four FE models were developed using different modelling approaches: continuum isotropic, continuum orthotropic, hybrid isotropic and hybrid orthotropic. The models were subjected to an iterative adaptation process based on the Mechanostat principle. Each model was adapted to a number of common daily living activities (walking, stair ascent, stair descent, sit-to-stand and stand-to-sit) by applying onto it joint and muscle loads derived using a musculoskeletal modelling framework. The resulting models, along with a structural model previously developed by the authors, were compared visually in terms of bone architecture, and their response to a single load case was compared to a continuum FE model derived from CT imaging data. The main findings of this study were that the continuum orthotropic model was the closest to the CT derived model in terms of load response albeit having less total bone volume, suggesting that the role of material directionality in influencing the maximum orthotropic Young's modulus should be included in continuum bone adaptation models. In addition, the hybrid models, where trabecular and cortical bone were distinguished, had similar outcomes, suggesting that the approach to modelling trabecular bone is less influential when the cortex is modelled separately.

scholarly journals A Comparative Study of Continuum and Structural Modelling Approaches to Simulate Bone Adaptation in the Pelvic Construct

2019 ◽  
Vol 9 (16) ◽  
pp. 3320 ◽  
Author(s):  
Dan T. Zaharie ◽  
Andrew T.M. Phillips
Keyword(s):  
Structural Model ◽  
Bone Adaptation ◽  
Bone Architecture ◽  
Fe Model ◽  
Structural Modelling ◽  
Imaging Data ◽  
Modelling Framework ◽  
Sit To Stand ◽  
Iterative Adaptation ◽  
Modelling Approaches

This study presents the development of a number of finite element (FE) models of the pelvis using different continuum and structural modelling approaches. Four FE models were developed using different modelling approaches: continuum isotropic, continuum orthotropic, hybrid isotropic and hybrid orthotropic. The models were subjected to an iterative adaptation process based on the Mechanostat principle. Each model was adapted to a number of common daily living activities (walking, stair ascent, stair descent, sit-to-stand and stand-to-sit) by applying onto it joint and muscle loads derived using a musculoskeletal modelling framework. The resulting models, along with a structural model previously developed by the authors, were compared visually in terms of bone architecture, and their response to a single load case was compared to a continuum FE model derived from computed tomography (CT) imaging data. The main findings of this study were that the continuum orthotropic model was the closest to the CT derived model in terms of load response albeit having less total bone volume, suggesting that the role of material directionality in influencing the maximum orthotropic Young’s modulus should be included in continuum bone adaptation models. In addition, the hybrid models, where trabecular and cortical bone were distinguished, had similar outcomes, suggesting that the approach to modelling trabecular bone is less influential when the cortex is modelled separately.

Investigation on the Effect of Pulsating Pressure on Tube-Hydroforming Process

2011 ◽  
Vol 473 ◽  
pp. 618-623
Author(s):  
Khalil Khalili ◽  
Seyed Yousef Ahmadi-Brooghani ◽  
Amir Ashrafi
Keyword(s):  
Finite Element ◽  
Internal Pressure ◽  
Thickness Distribution ◽  
Tube Hydroforming ◽  
Element Model ◽  
Fe Model ◽  
Axial Feeding ◽  
Hydroforming Process ◽  
The Finite Element Model ◽  
Good Agreement

Tube hydroforming process is one of the metal forming processes which uses internal pressure and axial feeding simultaneously to form a tube into the die cavity shape. This process has some advantages such as weight reduction, more strength and better integration of produced parts. In this study, T-shape tube hydroforming was analyzed by experimental and finite element methods. In Experimental method the pulsating pressure technique without counterpunch was used; so that the internal pressure was increased up to a maximum, the axial feeding was then stopped. Consequently, the pressure decreased to a minimum. The sequence was repeated until the part formed to its final shape. The finite element model was also established to compare the experimental results with the FE model. It is shown that the pulsating pressure improves the process in terms of maximum protrusion height obtained. Counterpunch was eliminated as being unnecessary. The results of simulation including thickness distribution and protrusion height were compared to the part produced experimentally. The result of modeling is in good agreement with the experiment. The paper describes the methodology and gives the results of both experiment and modeling.

An HREM study of superstructures in Ca4Al6SO16

1990 ◽  
Vol 48 (4) ◽  
pp. 1066-1067
Author(s):  
Y.G. Wang ◽  
H.Q. Ye ◽  
K.H. Kuo
Keyword(s):  
Calcium Aluminate ◽  
Structural Model ◽  
Bright Spot ◽  
Sulphur Atom ◽  
Synthetic Compound ◽  
Space Group ◽  
Lattice Images ◽  
Cubic Structure ◽  
Good Agreement

A synthetic compound Ca4Al6SO16 (usually abbreviated as C4A3S) obtained by mixing CaO, A12O3 and CaSO4 powders and finally sintered at 1380°C is a cement with excellent hydraulicity and greatly expanding in application. It is hydralysed rapidly by water to form predominatly calcium aluminate hydrates and therefore unlikly to occur naturally, although structurally it may be regarded as an end member of the sodalite-hauynite series of naturally occuring minerals. C4A3S has a cubic structure with ao=9.19Å and space group . Fig.1 is the projection viewed down axis, in which there are two sets of 8C position in , namely CaI and CaII, occupied by the calcium atoms, respectively, and the ratio of occupations in these two sets of positions is about 3:1. This suggests that the calcium atoms can freely occupy these sites in various degrees and usually they almost locates on the CaI positions. A through-focus series of the lattice images were found in good agreement with the simulated ones. Each bright spot in the image taken at Scherzer defocus correspounds to a colunm of sulphur atom in the structural model (Fig.1).

Aspergillus Spondylodiscitis After Spinal Stenosis Surgery: A Case Report

2020 ◽  
Vol 5 (3 And 4) ◽  
pp. 155-160
Author(s):  
Mohsen Aghapoor ◽  
◽  
Babak Alijani Alijani ◽  
Mahsa Pakseresht-Mogharab ◽  
◽  
...  
Keyword(s):  
Antifungal Drugs ◽  
The Body ◽  
Lower Limbs ◽  
Lumbar Pain ◽  
Case Presentation ◽  
Delay In Diagnosis ◽  
Death Case ◽  
Therapeutic Results ◽  
History Of ◽  
Probable Diagnosis

Background and Importance: Spondylodiscitis is an inflammatory disease of the body of one or more vertebrae and intervertebral disc. The fungal etiology of this disease is rare, particularly in patients without immunodeficiency. Delay in diagnosis and treatment of this disease can lead to complications and even death. Case Presentation: A 63-year-old diabetic female patient, who had a history of spinal surgery and complaining radicular lumbar pain in both lower limbs with a probable diagnosis of spondylodiscitis, underwent partial L2 and complete L3 and L4 corpectomy and fusion. As a result of pathology from tissue biopsy specimen, Aspergillus fungi were observed. There was no evidence of immunodeficiency in the patient. The patient was treated with Itraconazole 100 mg twice a day for two months. Pain, neurological symptom, and laboratory tests improved. Conclusion: The debridement surgery coupled with antifungal drugs can lead to the best therapeutic results.

Correction of Posture Deviations in the Sagittal Plane Using the Pilates Method

2019 ◽  
pp. 3-13
Author(s):  
Alexandru Cîtea ◽  
George-Sebastian Iacob
Keyword(s):  
Low Back Pain ◽  
Back Pain ◽  
Postural Control ◽  
Human Body ◽  
Sagittal Plane ◽  
The Body ◽  
Lower Limbs ◽  
Low Back ◽  
Pilates Method ◽  
The Relationship

Posture is commonly perceived as the relationship between the segments of the human body upright. Certain parts of the body such as the cephalic extremity, neck, torso, upper and lower limbs are involved in the final posture of the body. Musculoskeletal instabilities and reduced postural control lead to the installation of nonstructural posture deviations in all 3 anatomical planes. When we talk about the sagittal plane, it was concluded that there are 4 main types of posture deviation: hyperlordotic posture, kyphotic posture, rectitude and "sway-back" posture.Pilates method has become in the last decade a much more popular formof exercise used in rehabilitation. The Pilates method is frequently prescribed to people with low back pain due to their orientation on the stabilizing muscles of the pelvis. Pilates exercise is thus theorized to help reactivate the muscles and, by doingso, increases lumbar support, reduces pain, and improves body alignment.

scholarly journals Calculating the optimal hematocrit under the constraint of constant cardiac power

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Michal Sitina ◽  
Heiko Stark ◽  
Stefan Schuster
Keyword(s):  
Blood Flow ◽  
High Performance ◽  
Animal Species ◽  
Normal Values ◽  
Mechanical Load ◽  
The Body ◽  
Trade Off ◽  
Cardiac Power ◽  
Optimal Value ◽  
Good Agreement

AbstractIn humans and higher animals, a trade-off between sufficiently high erythrocyte concentrations to bind oxygen and sufficiently low blood viscosity to allow rapid blood flow has been achieved during evolution. Optimal hematocrit theory has been successful in predicting hematocrit (HCT) values of about 0.3–0.5, in very good agreement with the normal values observed for humans and many animal species. However, according to those calculations, the optimal value should be independent of the mechanical load of the body. This is in contradiction to the exertional increase in HCT observed in some animals called natural blood dopers and to the illegal practice of blood boosting in high-performance sports. Here, we present a novel calculation to predict the optimal HCT value under the constraint of constant cardiac power and compare it to the optimal value obtained for constant driving pressure. We show that the optimal HCT under constant power ranges from 0.5 to 0.7, in agreement with observed values in natural blood dopers at exertion. We use this result to explain the tendency to better exertional performance at an increased HCT.

scholarly journals A Feasibility Study of Kinematic Characteristics on the Upper Body According to the Shooting of Elite Disabled Archery Athletes

2021 ◽  
Vol 18 (6) ◽  
pp. 2962
Author(s):  
Tae-Whan Kim ◽  
Jae-Won Lee ◽  
Seoung-Ki Kang ◽  
Kyu-Yeon Chae ◽  
Sang-Hyup Choi ◽  
...  
Keyword(s):  
The Body ◽  
Lower Limbs ◽  
Upper Body ◽  
Movement Trajectory ◽  
Phase 2 ◽  
Kinematic Characteristics ◽  
Significant Difference ◽  
Athletes With Disabilities ◽  
Body Center ◽  
Time Required

The purpose of this study is to compare and analyze the kinematic characteristics of the upper limb segments during the archery shooting of Paralympic Wheelchair Class archers (ARW2—second wheelchair class—paraplegia or comparable disability) and Paralympic Standing Class archers (ARST—standing archery class—loss of 25 points in the upper limbs or lower limbs), where archers are classified according to their disability grade among elite disabled archers. The participants of this study were selected as seven elite athletes with disabilities by the ARW2 (n = 4) and ARST (n = 3). The analysis variables were (1) the time required for each phase, (2) the angle of inclination of the body center, (3) the change of trajectory of body center, and (4) the change of the movement trajectory of the bow center by phase when performing six shots in total. The ARW2 group (drawing phase; M = 2.228 s, p < 0.05, holding phase; M = 4.414 s, p < 0.05) showed a longer time than the ARST group (drawing phase; M = 0.985 s, holding phase; M = 3.042 s), and the angle of the body did not show a significant difference between the two groups. Additionally, in the direction of the anteroposterior axis in the drawing phase, the change in the movement trajectory of the body center showed a more significant amount of change in the ARW2 group than in the ARST group, and the change in the movement trajectory of the bow center did not show a significant difference between the two groups.

Analysis of the First Order and Slowly Varying Motions of an Axisymmetric Floating Body in Bichromatic Waves

2013 ◽  
Vol 135 (1) ◽  
Author(s):  
João Pessoa ◽  
Nuno Fonseca ◽  
C. Guedes Soares
Keyword(s):  
Vertical Cylinder ◽  
Vertical Axis ◽  
Second Order ◽  
The Body ◽  
Floating Body ◽  
Drift Motion ◽  
First Order ◽  
Motion Responses ◽  
Simple Geometry ◽  
Good Agreement

The paper presents an experimental and numerical investigation on the motions of a floating body of simple geometry subjected to harmonic and biharmonic waves. The experiments were carried out in three different water depths representing shallow and deep water. The body is axisymmetric about the vertical axis, like a vertical cylinder with a rounded bottom, and it is kept in place with a soft mooring system. The experimental results include the first order motion responses, the steady drift motion offset in regular waves and the slowly varying motions due to second order interaction in biharmonic waves. The hydrodynamic problem is solved numerically with a second order boundary element method. The results show a good agreement of the numerical calculations with the experiments.

High Frequency Vibration Analysis of Automotive Body Panels with Damping Materials

2010 ◽  
Vol 36 ◽  
pp. 293-296
Author(s):  
Yoshio Kurosawa ◽  
Takao Yamaguchi
Keyword(s):  
High Frequency ◽  
Large Scale ◽  
The Body ◽  
Viscoelastic Damping ◽  
Fe Model ◽  
Test Results ◽  
Automotive Body ◽  
Modal Damping ◽  
Practical Tool ◽  
Damping Materials

We have developed a technique for estimating vibrations of an automotive body structures with viscoelastic damping materials using large-scale finite element (FE) model, which will enable us to grasp and to reduce high-frequency road noise（200～500Hz）. In the new technique, first order solutions for modal loss factors are derived applying asymptotic method. This method saves calculation time to estimate modal damping as a practical tool in the design stages of the body structures. Frequency responses were calculated using this technique and the results almost agreed with the test results. This technique can show the effect of the viscoelastic damping materials on the automotive body panels, and it enables the more efficient layout of the viscoelastic damping materials. Further, we clarified damping properties of the automotive body structures under coupled vibration between frames and panels with the viscoelastic damping materials.

Sign in / Sign up

Export Citation Format

Share Document