Inflow Conditions and the Flow Behavior of a Biofluid in a Separated Flow Region

2014 ◽  
Author(s):  
Khaled J. Hammad
Keyword(s):  
Velocity Profile ◽  
Flow Behavior ◽  
Separated Flow ◽  
Flow Region ◽  
Shear Thinning ◽  
Inflow Velocity ◽  
Flow Restriction ◽  
Upstream Flow ◽  
Inflow Conditions ◽  
Region Size

Inflow conditions influence on the flow behavior of human blood in a separated and reattached flow region is investigated. Hemorheological data that account for the yield stress and shear-thinning non-Newtonian characteristics of blood are used. The governing mass and momentum conservation equations along with the Herschel-Bulkley constitutive equation are solved numerically using a finite-difference scheme. Two inflow velocity profiles are considered, uniform and fully-developed ones. A parametric study is performed to reveal the impact of inflow velocity profile, upstream flow restriction, and rheology on the recirculation strength and reattachment characteristics of the flow field. Uniform inflow conditions result in larger relative recirculation intensity, in comparison with the fully-developed ones, only for a moderate upstream flow restriction. The separated flow region size in the case of a fully-developed inflow is always smaller than the one observed for uniform inflow. Larger separated flow regions with stronger flow recirculation, are predicted by the Newtonian model in comparison with the yield shear-thinning model for all studied inflow and upstream restriction conditions. The separated flow region size displays a strong dependency on the inflow velocity profile and upstream flow restriction, in comparison with the observed dependency on the used hemorheological model.

The Flow Behavior of a Biofluid in a Separated and Reattached Flow Region

2015 ◽  
Vol 137 (6) ◽  
Author(s):  
Khaled J. Hammad
Keyword(s):  
Velocity Profile ◽  
Flow Behavior ◽  
Separated Flow ◽  
Flow Region ◽  
Shear Thinning ◽  
Inflow Velocity ◽  
Flow Restriction ◽  
Separated And Reattached Flow ◽  
Upstream Flow ◽  
Region Size

The flow behavior of human blood in a separated and reattached flow region is investigated. Hemorheological data that account for the yield stress and shear-thinning non-Newtonian characteristics of blood are used. The governing mass and momentum conservation equations along with the Herschel–Bulkley constitutive equation are solved numerically using a finite-difference scheme. Two inflow velocity profiles are considered, uniform and fully developed (fd) ones. A parametric study is performed to reveal the impact of inflow velocity profile, upstream flow restriction, and rheology on the recirculation strength and reattachment characteristics of the flow field. Uniform inflow conditions result in larger relative recirculation intensity, in comparison with the fd ones, only for a moderate upstream flow restriction. The separated flow region size in the case of a fd inflow is always larger than the one observed for uniform inflow. Larger separated flow regions with stronger flow recirculation, are predicted by the Newtonian (N) model in comparison with the yield shear-thinning (HB) model for all studied inflow and upstream restriction conditions. The separated flow region size displays a stronger dependency on the inflow velocity profile and upstream flow restriction, in comparison with the observed dependency on the used hemorheological model.

Hemorheology and the Flow Behavior in a Separated Flow Region

2013 ◽  
Author(s):  
Khaled J. Hammad
Keyword(s):  
Yield Stress ◽  
Heart Valves ◽  
Flow Behavior ◽  
Circulatory System ◽  
Separated Flow ◽  
Flow Region ◽  
Shear Thinning ◽  
Momentum Conservation ◽  
Artificial Organs ◽  
Rotary Blood Pumps

Separating flows can be encountered in the cardiovascular circulatory system and many biomedical applications such as artificial organs, rotary blood pumps, heart valves, stents, catheters, and probes. The current study investigates the influence of hemorheology on the flow behavior in a confined separated flow region. Recent hemorheological models and data are utilized to account for the yield stress and shear-thinning non-Newtonian characteristics of human blood. The flow field information is obtained by numerically solving the governing mass and momentum conservation equations along with the Herschel-Bulkley rheological model. The yield shear-thinning model always results in the smallest flow separation region. The yield stress and shear-thinning non-Newtonian models predict lower recirculation strength in comparison with the Newtonian model.

Inflow Conditions and Suddenly Expanding Annular Shear-Thinning Flows

2017 ◽  
Author(s):  
Khaled J. Hammad
Keyword(s):  
Power Law ◽  
Numerical Solutions ◽  
Shear Thinning ◽  
Diameter Ratio ◽  
Inflow Velocity ◽  
Flow Recirculation ◽  
Shear Thinning Fluids ◽  
Power Law Index ◽  
The Impact ◽  
Inflow Conditions

The impact of inflow conditions on the flow structure and evolution characteristics of annular flows of Newtonian and shear-thinning fluids through a sudden pipe expansion are studied. Numerical solutions to the elliptic form of the governing equations along with the power-law constitutive equation were obtained using a finite-difference scheme. A parametric study is performed to reveal the influence of inflow velocity profiles, annular diameter ratio, k, and power-law index, n, over the following range of parameters: inflow velocity profile = {fully-developed, uniform}, k = {0, 0.5, 0.7} and n = {1, 0.8, 0.6}. Flow separation and entrainment, downstream of the expansion plane, creates central and a much larger outer recirculation regions. The results demonstrate the influence of inflow conditions, annular diameter ratio, and rheology on the extent and intensity of both flow recirculation regions, the wall shear stress distribution, and the evolution and redevelopment characteristics of the flow downstream the expansion plane. Fully-developed inflows result in larger reattachment and redevelopment lengths as well as more intense recirculation, within the central and corner regions, in comparison with uniform inflow conditions.

Experimental Study of the Fence Wake Manipulation Using Pulsating Jet

2009 ◽  
Author(s):  
In-Su Kang ◽  
Young-Ho Choi ◽  
Chel-Woo Park ◽  
Hyoung-Bum Kim
Keyword(s):  
Boundary Layer ◽  
Experimental Study ◽  
Separation Bubble ◽  
Water Channel ◽  
Separated Flow ◽  
Flow Region ◽  
Velocity Fields ◽  
Circulating Water ◽  
Pulsating Jet ◽  
Upstream Flow

In this study, we experimentally investigated the effect of rear-located pulsating jet to reduce the separated flow region behind the vertical fence. The separation bubble behind the fence is the representative feature of fence wake. Control of fence wake can be used for various purposes such as the reduction of drag, increasing or decreasing the mixing, etc. The vertical fence was submerged in the turbulent boundary layer in the circulating water channel. Reynolds number based on the fence height and upstream flow velocity was 3000. The parameters used for controlling the pulsating jet included the frequency, jet speed and distance between the fence and slit nozzle. In addition, we investigated the effect of continuous jet on the fence wake. Phase averaged DPIV method was applied to measure the instantaneous velocity fields around the fence. And the obtained results were compared with those of uncontrolled fence flow. The obtained results quantitatively show the decrease of reattachment region brought by the pulsating jet. And the specific jet condition which were effective to reduce the separation bubble behind the fence were found.

Investigation of the influence of the flow structure on the accuracy of flow measurement before a hydrometric structure in an open channel

2020 ◽  
pp. 41-44
Author(s):  
Anatoly Kusher
Keyword(s):  
Velocity Profile ◽  
Flow Velocity ◽  
Water Flow ◽  
Flow Measurement ◽  
Water Discharge ◽  
Critical Depth ◽  
Flow Measurements ◽  
Study Results ◽  
Flow Velocity Profile ◽  
Upstream Flow

The reliability of water flow measurement in irrigational canals depends on the measurement method and design features of the flow-measuring structure and the upstream flow velocity profile. The flow velocity profile is a function of the channel geometry and wall roughness. The article presents the study results of the influence of the upstream flow velocity profile on the discharge measurement accuracy. For this, the physical and numerical modeling of two structures was carried out: a critical depth flume and a hydrometric overfall in a rectangular channel. According to the data of numerical simulation of the critical depth flume with a uniform and parabolic (1/7) velocity profile in the upstream channel, the values of water discharge differ very little from the experimental values in the laboratory model with a similar geometry (δ < 2 %). In contrast to the critical depth flume, a change in the velocity profile only due to an increase in the height of the bottom roughness by 3 mm causes a decrease of the overfall discharge coefficient by 4…5 %. According to the results of the numerical and physical modeling, it was found that an increase of backwater by hydrometric structure reduces the influence of the upstream flow velocity profile and increases the reliability of water flow measurements.

scholarly journals Modification of Airflow Structure Due to Wave Breaking on a Submerged Topography

2021 ◽  
Author(s):  
Petter Vollestad ◽  
Atle Jensen
Keyword(s):  
Wind Wave ◽  
Separated Flow ◽  
Flow Region ◽  
Breaking Waves ◽  
Leeward Side ◽  
Geometrical Properties ◽  
Image Velocimetry ◽  
Wind Profiles ◽  
The Waves ◽  
Sheltered Area

AbstractExperimental results from a combined wind–wave tank are presented. Wind profiles and resulting wind–wave spectra are described, and an investigation of the airflow above breaking waves is presented. Monochromatic waves created by the wave maker are directed towards a submerged topography. This causes the waves to break at a predictable location, facilitating particle-image-velocimetry measurements of the airflow above steep breaking and non-breaking waves. We analyze how the breaking state modifies the airflow structure, and in particular the extent of the sheltered area on the leeward side of the waves. Results illustrate that while the geometrical properties of the waves greatly influence the airflow structure on the leeward side of the waves, the state of breaking (i.e., whether the waves are currently in a state of active breaking) is not observed to have a clear effect on the extent of the separated flow region, or on the velocity distribution within the sheltered region.

A Numerical and Experimental Investigation of Turbulent Heat Transport Downstream From an Abrupt Pipe Expansion

1983 ◽  
Vol 105 (4) ◽  
pp. 862-869 ◽  
Author(s):  
R. S. Amano ◽  
M. K. Jensen ◽  
P. Goel
Keyword(s):  
Heat Transfer ◽  
Numerical Solutions ◽  
Numerical Study ◽  
Separated Flow ◽  
Flow Region ◽  
Reynolds Numbers ◽  
Turbulent Heat ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Pipe Expansion

An experimental and numerical study is reported on heat transfer in the separated flow region created by an abrupt circular pipe expansion. Heat transfer coefficients were measured along the pipe wall downstream from an expansion for three different expansion ratios of d/D = 0.195, 0.391, and 0.586 for Reynolds numbers ranging from 104 to 1.5 × 105. The results are compared with the numerical solutions obtained with the k ∼ ε turbulence model. In this computation a new finite difference scheme is developed which shows several advantages over the ordinary hybrid scheme. The study also covers the derivation of a new wall function model. Generally good agreement between the measured and the computed results is shown.

Effects of Nano-Nozzles Cross-Sectional Geometry on Fluid Flow: Molecular Dynamic Simulation

2017 ◽  
Vol 34 (5) ◽  
pp. 667-678 ◽  
Author(s):  
H. Nowruzi ◽  
H. Ghassemi
Keyword(s):  
Fluid Flow ◽  
Velocity Profile ◽  
Cross Sections ◽  
Md Simulation ◽  
Flow Behavior ◽  
Water Model ◽  
Physical Parameters ◽  
Cross Sectional ◽  
Behavior Characteristics ◽  
Fanning Friction Factor

AbstractNano-nozzles are an essential part of the nano electromechanical systems (NEMS). Cross-sectional geometry of nano-nozzles has a significant role on the fluid flow inside them. So, main purpose of the present study is related to the effects of different symmetrical cross-sections on the fluid flow behavior inside of nano-nozzles. To this accomplishment, five different cross-sectional geometries (equilateral triangle, square, regular hexagon, elliptical and circular) are investigated by using molecular dynamics (MD) simulation. In addition, TIP4P is used for atomistic water model. In order to evaluate the fluid flow behavior, non-dimensional physical parameters such as Fanning friction factor, velocity profile and density number are analyzed. Obtained results are shown that the flow behavior characteristics appreciably depend on the geometry of nano-nozzle's cross-section. Velocity profile and density number for five different cross sections of nano-nozzle at three various measurement gauges are presented and discussed.

scholarly journals Effect of the Flame Dome Depth and Improvement of the Pressure Loss in the Dump Diffuser

1998 ◽  
Author(s):  
Shinji Honami ◽  
Wataru Tsuboi ◽  
Takaaki Shizawa
Keyword(s):  
Velocity Profile ◽  
Reynolds Stress ◽  
Flow Rate ◽  
Pressure Loss ◽  
Total Pressure ◽  
Flow Behavior ◽  
Sudden Expansion ◽  
Mean Velocity ◽  
The Mean ◽  
Stress Profiles

This paper presents the effect of flame dome depth on the total pressure performance and flow behavior in a sudden expansion region of the combustor diffuser without flow entering the dome head. The mean velocity and turbulent Reynolds stress profiles in the sudden expansion region were measured by a Laser Doppler Velocitmetry (LDV) system. The experiments show that total pressure loss is increased, when flame dome depth is increased. Installation of an inclined combuster wall in the sudden expansion region is suggested from the viewpoint of a control of the reattaching flow. The inclined combustor wall is found to be effective in improvement of the diffuser performance. Better characteristics of the flow rate distribution into the branched channels are obtained in the inclined wall configuration, even if the distorted velocity profile is provided at the diffuser inlet.

Sign in / Sign up

Export Citation Format

Share Document