The ellipsoidal algal cell

2019 ◽  
Vol 155 ◽  
pp. 41-55
Author(s):  
Allan Pentecost
Keyword(s):  
2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ghazal Azarfar ◽  
Ebrahim Aboualizadeh ◽  
Simona Ratti ◽  
Camilla Olivieri ◽  
Alessandra Norici ◽  
...  

AbstractAlgae are the main primary producers in aquatic environments and therefore of fundamental importance for the global ecosystem. Mid-infrared (IR) microspectroscopy is a non-invasive tool that allows in principle studying chemical composition on a single-cell level. For a long time, however, mid-infrared (IR) imaging of living algal cells in an aqueous environment has been a challenge due to the strong IR absorption of water. In this study, we employed multi-beam synchrotron radiation to measure time-resolved IR hyperspectral images of individual Thalassiosira weissflogii cells in water in the course of acclimation to an abrupt change of CO2 availability (from 390 to 5000 ppm and vice versa) over 75 min. We used a previously developed algorithm to correct sinusoidal interference fringes from IR hyperspectral imaging data. After preprocessing and fringe correction of the hyperspectral data, principal component analysis (PCA) was performed to assess the spatial distribution of organic pools within the algal cells. Through the analysis of 200,000 spectra, we were able to identify compositional modifications associated with CO2 treatment. PCA revealed changes in the carbohydrate pool (1200–950 cm$$^{-1}$$ - 1 ), lipids (1740, 2852, 2922 cm$$^{-1}$$ - 1 ), and nucleic acid (1160 and 1201 cm$$^{-1}$$ - 1 ) as the major response of exposure to elevated CO2 concentrations. Our results show a local metabolism response to this external perturbation.


The cell walls of a number of marine algae, namely species of Bryopsis, Caulerpa, Udotea, Halimeda and Penicillus and of one freshwater alga, Dichotomosiphon , are examined using both chemical and physical techniques. It is shown that, with the possible exception of Bryopsis , cellulose is completely absent and that the walls contain instead β -l,3-linked xylan as the structural polysaccharide. Bryopsis contains, in addition, a glucan which is most abundant in the outer layers of the wall and which stains like cellulose. The xylan is microfibrillar but the microfibrils are more strongly adherent than they are in cellulose, and in some species appear in the electron microscope to be joined by short crossed rod-like bodies. The orientation of the microfibrils is found to vary, ranging from a net tendency to transverse orientation through complete randomness to almost perfect longitudinal alinement. The microfibrils are negatively birefringent, so that all walls seen in optical section, and all parallel arrays of microfibrils whether in face view or in section (except strictly transverse section) are negatively birefringent. With Bryopsis , the negative birefringence in face view is overcompensated by the positive birefringence of the incrusting glucan so that the true birefringence of the crystalline polysaccharide is observed only after the glucan is removed. The X-ray diagram of parallel arrays of microfibrils as found, for instance, in Penicillus dumetosus shows that the xylan chains are helically coiled, in harmony with the negative birefringence. It is deduced that the microfibrils consist of hexagonally packed, double-stranded helices. The diameter of the helices increases with increasing relative humidity, as water is taken into the lattice, from 13.7 Å in material dried over phosphorus pentoxide to a maximum of 1.54 Å at 65 % relative humidity when the xylan contains 30 % of its weight as water. The repeat distance along the helix axis ranges from 5.85 Å (dry) to 6.06 Å (wet), the length of a half turn of each helix containing three xylose residues. The incrusting substances in these walls often include a glucan which is said also to be 1,3-linked. The significance of the extensive differences between this xylan and cellulose are examined both as regards some of the physical properties of the respective cell walls and in relation to the taxonomic position of these plants.


2018 ◽  
Vol 28 (4) ◽  
pp. 169-178 ◽  
Author(s):  
Hyun-Ju Hwang ◽  
Yong Tae Kim ◽  
Nam Seon Kang ◽  
Jong Won Han

The algal cell wall is a potent barrier for delivery of transgenes for genetic engineering. Conventional methods developed for higher plant systems are often unable to penetrate or remove algal cell walls owing to their unique physical and chemical properties. Therefore, we developed a simple transformation method for <i>Chlamydomonas reinhardtii</i> using commercially available enzymes. Out of 7 enzymes screened for cell wall disruption, a commercial form of subtilisin (Alcalase) was the most effective at a low concentration (0.3 Anson units/mL). The efficiency was comparable to that of gamete lytic enzyme, a protease commonly used for the genetic transformation of <i>C. reinhardtii</i>. The transformation efficiency of our noninvasive method was similar to that of previous methods using autolysin as a cell wall-degrading enzyme in conjunction with glass bead transformation. Subtilisin showed approximately 35% sequence identity with sporangin, a hatching enzyme of <i>C. reinhardtii</i>, and shared conserved active domains, which may explain the effective cell wall degradation. Our trans­formation method using commercial subtilisin is more reliable and time saving than the conventional method using autolysin released from gametes for cell wall lysis.


1992 ◽  
Vol 25 (10) ◽  
pp. 319-327 ◽  
Author(s):  
P. D. Rose ◽  
B. A. Maart ◽  
T. D. Phillips ◽  
S. L. Tucker ◽  
A. K. Cowan ◽  
...  

An algal high rate oxidation ponding process for treating organic s present in saline effluents has been described. The extreme halophile Dunaliella salina can be made to predominate in the system by manipulating salinity, producing products of value together with a waste treatment function. Application in treating tannery saline organic wastes was examined. Techniques appropriate for the harvesting of micro-algae from this and other algal production systems presents a limiting factor in the development of algal biotechnology. Cross-flow filtration was evaluated as a technique for micro-algal cell separation. Both microfiltration and ultrafiltration were found to produce effective algal removal from the medium, Cross-flow ultrafiltration with a polyethersulfone coated tubular filter produced effective separation with the production of cell concentrates in a viable condition. Flux rates of 30 - 40 LMH fall within acceptable levels for application in industrial processes. Cell shattering observed with microfiltration precludes its use for recovering whole or viable cell concentrates.


2012 ◽  
Vol 48 (2) ◽  
pp. 293-302 ◽  
Author(s):  
Michel Lavoie ◽  
Séverine Le Faucheur ◽  
Amiel Boullemant ◽  
Claude Fortin ◽  
Peter G. C. Campbell

Author(s):  
Dieter F. Ihrig ◽  
H. Michael Heise ◽  
Ulrich Brunert ◽  
Martin Poschmann ◽  
Ruediger Kuckuk ◽  
...  

Biomass production by micro-algae is by a factor of 10 more efficient than by plants, by which an economic process of solar energy harvesting can be established. Owing to the very low dry mass content of algal suspensions, the most promising way of their conversion to a high exoergic and transportable form of energy is the anaerobic production of biogas. On account of this, we are developing such processes including a micro-algal reactor, methods for micro-algal cell separation and biomass treatment, and a subsequent two-stage anaerobic fermentation process. First results from parts of this development work are shown. The continuous feeding of the anaerobic process over several weeks using micro-algal biomass is discussed in more details. The biogas is composed of methane, higher hydrocarbons, carbon dioxide, and hydrogen sulphide. Using steam reforming, it can be converted to a mixture of carbon dioxide and hydrogen. These gases can be separated using membrane technology. It is possible to form a closed carbon cycle by recycling the carbon dioxide to the micro-algal process. The transportable and storable hydrogen product is a valuable energy source and can be converted to electrical energy and heat using fuel cells. The simulation of such a process will be explicated.


2020 ◽  
Vol 477 (13) ◽  
pp. 2543-2559
Author(s):  
Janka Widzgowski ◽  
Alexander Vogel ◽  
Lena Altrogge ◽  
Julia Pfaff ◽  
Heiko Schoof ◽  
...  

Algae have evolved several mechanisms to adjust to changing environmental conditions. To separate from their surroundings, algal cell membranes form a hydrophobic barrier that is critical for life. Thus, it is important to maintain or adjust the physical and biochemical properties of cell membranes which are exposed to environmental factors. Especially glycerolipids of thylakoid membranes, the site of photosynthesis and photoprotection within chloroplasts, are affected by different light conditions. Since little is known about membrane lipid remodeling upon different light treatments, we examined light induced alterations in the glycerolipid composition of the two Chlorella species, C. vulgaris and C. sorokiniana, which differ strongly in their ability to cope with different light intensities. Lipidomic analysis and isotopic labeling experiments revealed differences in the composition of their galactolipid species, although both species likely utilize galactolipid precursors originated from the endoplasmic reticulum. However, in silico research of de novo sequenced genomes and ortholog mapping of proteins putatively involved in lipid metabolism showed largely conserved lipid biosynthesis pathways suggesting species specific lipid remodeling mechanisms, which possibly have an impact on the response to different light conditions.


Sign in / Sign up

Export Citation Format

Share Document