scholarly journals Binding Rather Than Metabolism May Explain the Interaction of Two Food-Grade Lactobacillus Strains with Zearalenone and Its Derivative ɑ́-Zearalenol

2002 ◽  
Vol 68 (7) ◽  
pp. 3545-3549 ◽  
Author(s):  
Hani El-Nezami ◽  
Nektaria Polychronaki ◽  
Seppo Salminen ◽  
Hannu Mykkänen
Keyword(s):  
High Performance ◽  
Degradation Products ◽  
Lactobacillus Rhamnosus ◽  
Considerable Proportion ◽  
Bacterial Concentration ◽  
New Approach ◽  
Food Grade ◽  
Bacterial Surface ◽  
Heat Treated ◽  
The Media

ABSTRACT The interaction between two Fusarium mycotoxins, zearalenone (ZEN) and its derivative ά-zearalenol (ά-ZOL), with two food-grade strains of Lactobacillus was investigated. The mycotoxins (2 μg ml−1) were incubated with either Lactobacillus rhamnosus strain GG or L. rhamnosus strain LC705. A considerable proportion (38 to 46%) of both toxins was recovered from the bacterial pellet, and no degradation products of ZEN and ά-ZOL were detected in the high-performance liquid chromatograms of the supernatant of the culturing media and the methanol extract of the pellet. Both heat-treated and acid-treated bacteria were capable of removing the toxins, indicating that binding, not metabolism, is the mechanism by which the toxins are removed from the media. Binding of ZEN or ά-ZOL by lyophilized L. rhamnosus GG and L. rhamnosus LC705 was a rapid reaction: approximately 55% of the toxins were bound instantly after mixing with the bacteria. Binding was dependent on the bacterial concentration, and coincubation of ZEN with ά-ZOL significantly affected the percentage of the toxin bound, indicating that these toxins may share the same binding site on the bacterial surface. These results can be exploited in developing a new approach for detoxification of mycotoxins from foods and feeds.

BRUSHFORM 96

Alloy Digest ◽  
2014 ◽  
Vol 63 (7) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
High Performance ◽  
Strength Characteristics ◽  
Bend Strength ◽  
Copper Nickel ◽  
Heat Treated

Abstract BrushForm 96 strip is a high-performance, heat treatable spinodal copper-nickel-tin alloy designed to provide optimal formability and strength characteristics in conductive spring applications. It is available in both pre-heat treated (mill hardened) and heat treatable (age hardenable) forms. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. and bend strength. It also includes information on forming. Filing Code: Cu-833. Producer or source: Materion Brush Performance Alloys.

The Influence of Some Factors on Spirolactone Stability in Solution

2008 ◽  
Vol 59 (7) ◽  
Author(s):  
Daniela Lucia Muntean ◽  
Silvia Imre ◽  
Cosmina Voda
Keyword(s):  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
Uv Irradiation ◽  
High Performance ◽  
Degradation Products ◽  
Simultaneous Action ◽  
Ethanolic Solution ◽  
Degradation Processes ◽  
Stable Solutions ◽  
Preformulation Study

The influence of some factors on spironolactone stability in solution was studied, by applying high-performance liquid chromatography, as a part of a pharmaceutical preformulation study in order to obtain a spironolactone solution for alopecia treatment. Solutions of 1 mg/ml spironolactone in aqueous ethanolic solution 1 : 1 and in 20 mM cyclodextrines solutions (b-, hydroxi-b- and methyl-b-cyclodextrine) was used, maintained at 8 and 22 �C, protected from light and after UV irradiation at 254 nm. The main degradation products were 7a-thiospirolactone and canrenone. The most stable solutions were the alcoholic ones and with methyl-beta-cyclodextrine, but the simultaneous action of temperature and UV irradiation allowed degradation processes after one hour of exposure, more aggressive in the presence of methyl-beta-cyclodextrine. In conclusion, for alopecia treatment with spironolactone a 1 mg/mL ethanolic solution could be used and it is recommendable the protection of treated zone.

Recent Applications of High Performance Thin Layer Chromatography and Derivative Spectrophotometry in Pharmaceutical Analysis

2020 ◽  
Vol 16 (6) ◽  
pp. 671-689
Author(s):  
Marcin Gackowski ◽  
Marcin Koba ◽  
Katarzyna Mądra-Gackowska ◽  
Piotr Kośliński ◽  
Stefan Kruszewski
Keyword(s):  
Thin Layer ◽  
Thin Layer Chromatography ◽  
Pharmaceutical Analysis ◽  
High Performance ◽  
Degradation Products ◽  
Derivative Spectrophotometry ◽  
Accuracy And Precision ◽  
Post Marketing ◽  
Layer Chromatography

At present, no one can imagine drug development, marketing and post-marketing without rigorous quality control at each stage. Only modern, selective, accurate and precise analytical methods for determination of active compounds, their degradation products and stability studies are able to assure the appropriate amount and purity of drugs administered every day to millions of patients all over the world. For routine control of drugs simple, economic, rapid and reliable methods are desirable. The major focus of current scrutiny is placed on high-performance thin layer chromatography and derivative spectrophotometry methods, which fulfill routine drug estimation’s expectations [1-4]. The present paper reveals state-of-the-art and possible applications of those methods in pharmaceutical analysis between 2010 and 2018. The review shows advantages of high-performance thin layer chromatography and derivative spectrophotometry, including accuracy and precision comparable to more expensive and time-consuming methods as well as additional fields of possible applications, which contribute to resolving many analytical problems in everyday laboratory practice.

ICH/FDA Guidelines-Compliant Validated Stability-Indicating HPLC-UV Method for the Determination of Axitinib in Bulk and Dosage Forms

2020 ◽  
Vol 16 (8) ◽  
pp. 1106-1112
Author(s):  
Ibrahim A. Darwish ◽  
Nasr Y. Khalil ◽  
Mohammad AlZeer
Keyword(s):  
High Performance ◽  
Kinase Inhibitor ◽  
Degradation Products ◽  
Internal Standard ◽  
Dosage Forms ◽  
Uv Detector ◽  
Stability Indicating ◽  
Therapeutic Benefits ◽  
Relative Standard

Background: Axitinib (AXT) is a member of the new generation of the kinase inhibitor indicated for the treatment of advanced renal cell carcinoma. Its therapeutic benefits depend on assuring the good-quality of its dosage forms in terms of content and stability of the pharmaceutically active ingredient. Objective: This study was devoted to the development of a simple, sensitive and accurate stabilityindicating high-performance liquid chromatographic method with ultraviolet detection (HPLC-UV) for the determination of AXT in its bulk and dosage forms. Methods: Waters HPLC system was used. The chromatographic separation of AXT, internal standard (olaparib), and degradation products were performed on the Nucleosil CN column (250 × 4.6 mm, 5 μm). The mobile phase consisted of water:acetonitrile:methanol (40:40:20, v/v/v) with a flow rate of 1 ml/min, and the UV detector was set at 225 nm. AXT was subjected to different accelerated stress conditions and the degradation products, when any, were completely resolved from the intact AXT. Results: The method was linear (r = 0.9998) in the concentration range of 5-50 μg/ml. The limits of detection and quantitation were 0.85 and 2.57 μg/ml, respectively. The accuracy of the method, measured as recovery, was in the range of 98.0-103.6% with relative standard deviations in the range of 0.06-3.43%. The results of stability testing revealed that AXT was mostly stable in neutral and oxidative conditions; however, it was unstable in alkaline and acidic conditions. The kinetics of degradation were studied, and the kinetic rate constants were determined. The proposed method was successfully applied for the determination of AXT in bulk drug and dosage forms. Conclusions: A stability-indicating HPLC-UV method was developed and validated for assessing AXT stability in its bulk and dosage forms. The method met the regulatory requirements of the International Conference on Harmonization (ICH) and the Food and Drug Administration (FDA). The results demonstrated that the method would have great value when applied in quality control and stability studies for AXT.

Validated Stability Indicating HPTLC Method for the Estimation of Amoxapine in Different Stress Conditions

2019 ◽  
Vol 15 (3) ◽  
pp. 273-279
Author(s):  
Shweta G. Rangari ◽  
Nishikant A. Raut ◽  
Pradip W. Dhore
Keyword(s):  
High Performance ◽  
Limit Of Detection ◽  
Degradation Products ◽  
Analysis Data ◽  
Peak Height ◽  
Good Resolution ◽  
Stability Indicating ◽  
Limit Of Quantitation ◽  
Wide Range ◽  
Hptlc Method

Background:The unstable and/or toxic degradation products may form due to degradation of drug which results into loss of therapeutic activity and lead to life threatening condition. Hence, it is important to establish the stability characteristics of drug in various conditions such as in temperature, light, oxidising agent and susceptibility across a wide range of pH values.Introduction:The aim of the proposed study was to develop simple, sensitive and economic stability indicating high performance thin layer chromatography (HPTLC) method for the quantification of Amoxapine in the presence of degradation products.Methods:Amoxapine and its degraded products were separated on precoated silica gel 60F254 TLC plates by using mobile phase comprising of methanol: toluene: ammonium acetate (6:3:1, v/v/v). The densitometric evaluation was carried out at 320 nm in reflectance/absorbance mode. The degradation products obtained as per ICH guidelines under acidic, basic and oxidative conditions have different Rf values 0.12, 0.26 and 0.6 indicating good resolution from each other and pure drug with Rf: 0.47. Amoxapine was found to be stable under neutral, thermal and photo conditions.Results:The method was validated as per ICH Q2 (R1) guidelines in terms of accuracy, precision, ruggedness, robustness and linearity. A good linear relationship between concentration and response (peak area and peak height) over the range of 80 ng/spot to 720 ng/spot was observed from regression analysis data showing correlation coefficient 0.991 and 0.994 for area and height, respectively. The limit of detection (LOD) and limit of quantitation (LOQ) for area were found to be 1.176 ng/mL and 3.565 ng/mL, whereas for height, 50.063 ng/mL and 151.707 ng/mL respectively.Conclusion:The statistical analysis confirmed the accuracy, precision and selectivity of the proposed method which can be effectively used for the analysis of amoxapine in the presence of degradation products.

Theoretical Interpretation of High-Performance Chromatographic Data for a Heterogeneous Series of Compounds

1992 ◽  
Vol 57 (1) ◽  
pp. 33-45
Author(s):  
Vladimír Jakuš
Keyword(s):  
Experimental Data ◽  
High Performance ◽  
Theoretical Interpretation ◽  
Retention Data ◽  
Theoretical Evaluation ◽  
New Approach ◽  
Free Energy Of Solvation ◽  
Rp Hplc ◽  
Mobile Phases ◽  
Reversed Phases

A new approach to theoretical evaluation of the Gibbs free energy of solvation was applied for estimation of retention data in high-performance liquid chromatography on reversed phases (RP-HPLC). Simple and improved models of stationary and mobile phases in RP-HPLC were employed. Statistically significant correlations between the calculated and experimental data were obtained for a heterogeneous series of twelve compounds.

Vacuum processed large area doped thin-film crystals: A new approach for high-performance organic electronics

2021 ◽  
Vol 17 ◽  
pp. 100352
Author(s):  
S.-J. Wang ◽  
M. Sawatzki ◽  
H. Kleemann ◽  
I. Lashkov ◽  
D. Wolf ◽  
...  
Keyword(s):  
Thin Film ◽  
Organic Electronics ◽  
High Performance ◽  
Large Area ◽  
New Approach

scholarly journals A Selective High-Performance Liquid Chromatography Method for the Determination of Reboxetine in Bulk Drug and Tablets

2006 ◽  
Vol 89 (6) ◽  
pp. 1552-1556
Author(s):  
ArmaĞan Önal ◽  
Olcay SaĞiri ◽  
S Müge Çetin ◽  
Sidika Toker
Keyword(s):  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
High Performance ◽  
Depressive Disorders ◽  
Degradation Products ◽  
Severe Depression ◽  
Hplc Method ◽  
Chromatography Method ◽  
Relative Standard

Abstract Reboxetine is used as a selective noradrenaline reuptake inhibitor for the treatment of major depressive disorders. It is effective in the treatment of severe depression and safer to use than traditional tricyclic antidepressants. In this study, a novel, simple, and rapid stability-indicating high-performance liquid chromatography (HPLC) method for reboxetine methansulfonate was successfully developed and validated for the assay of tablets. The method was used to quantify reboxetine in tablets; it employed a C18 column (150 4.6 mm id) with an isocratic mobile phase consisting of methanolphosphate buffer (pH 7, 0.02 M; 55 + 45, v/v) at a flow rate of 1.0 μmL/min. Reboxetine was detected by an ultraviolet detector at 277 nm. The retention time of reboxetine was about 4.5 min. The developed HPLC method was validated with respect to linearity, precision, sensitivity, accuracy, and selectivity. The method was linear over the concentration range 150 g/mL (r 0.9999). The limits of detection and the quantitation of reboxetine were 0.1 and 0.3 μg/mL, respectively. The relative standard deviation values for intraday and interday precision were 0.781.01 and 1.081.37%, respectively. Selectivity was validated by subjecting a stock solution of reboxetine to neutral, acid, and alkali hydrolysis, as well as oxidation, dry heat treatment, and photodegradation. The peaks of the degradation products did not interfere with the peak of reboxetine. The results indicated that the proposed method could be used in a stability assay. The proposed method was successfully applied to the determination of reboxetine in tablets. Excipients present in the tablets did not interfere with the analysis.

Sign in / Sign up

Export Citation Format

Share Document