scholarly journals Interactions between propagating rifts and linear weaknesses in the lower crust

Geosphere ◽  
2019 ◽  
Vol 15 (5) ◽  
pp. 1617-1640 ◽  
Author(s):  
Nicolas E. Molnar ◽  
Alexander R. Cruden ◽  
Peter G. Betts
Keyword(s):  
Three Dimensional ◽  
Structural Evolution ◽  
Shear Zones ◽  
Rift Basins ◽  
Significant Control ◽  
Existing Structures ◽  
Rift Propagation ◽  
Continental Rifts ◽  
Extension Direction ◽  
Changes Over Time

Abstract Pre-existing structures in the crust such as shear zones, faults, and mobile belts are known to exert a significant control on the structural evolution of continental rifts. However, the influence of such features when the extension direction progressively changes over time remains uncertain. Here we present new results from three-dimensional lithospheric-scale laboratory experiments of rotational extension that provide key insights into the temporal evolution of propagating rifts. We specifically test and characterize how rifts propagate and interact with linear crustal rheological heterogeneities oriented at variable angles with respect to the extension direction. Results show that approximately rift-parallel pre-existing heterogeneities favor the formation of long, linear faults that reach near-final lengths at early stages. Low angles between the heterogeneities and the propagating rift axis may result in strong strike-slip reactivation of the pre-existing structures if they are suitably oriented with respect to the stretching direction. When the linear heterogeneities are oriented at intermediate to high angles rift branches become laterally offset as they propagate, resulting in complex rhombic fault patterns. Rift-perpendicular crustal heterogeneities do not affect fault trends during rift propagation, but cause stalling and deepening of laterally growing rift basins. Similarities between the analogue experimental results and selected natural examples provide insights on how nature finds the preferential pathway to breakup in heterogeneous continental lithosphere.

Temporal variations in the dynamic evolution of an overriding plate: Evidence from the Wulong area in the eastern North China Craton, China

2020 ◽  
Vol 132 (9-10) ◽  
pp. 2023-2042 ◽  
Author(s):  
Shuai Zhang ◽  
Guang Zhu ◽  
Shiye Xiao ◽  
Nan Su ◽  
Cheng Liu ◽  
...  
Keyword(s):  
Early Cretaceous ◽  
North China Craton ◽  
North China ◽  
Structural Evolution ◽  
Shear Zones ◽  
Temporal Variations ◽  
Normal Faults ◽  
Second Phase ◽  
Existing Structures ◽  
Plate Deformation

Abstract The evolution of overriding-plate deformation, and the mechanisms responsible for this deformation, are debated. One area where these processes can be investigated is the eastern North China Craton (NCC) in China, which was situated in an overriding-plate position relative to the subducting Paleo-Pacific Plate during the Jurassic and Cretaceous. Here we constrain the structural evolution of the Jurassic and Cretaceous using new structural, stress field, and geochronological data from the Wulong area. The results show that the first phase of deformation (D1) produced a series of SE-dipping reverse shear zones and parallel folds in response to NW-SE shortening at 157–146 Ma (Late Jurassic). Based on microscopic observations and quartz c-axis analysis, it is suggested that the temperature during D1 deformation was 500 ± 50 °C. A second phase of contractional deformation (D2) at 146–132 Ma (earliest Early Cretaceous) gave rise to numerous NE-SW–striking sinistral faults and shear zones. The majority of D2 structures display ductile fabrics in the southwest of the Wulong area and brittle deformational features in the northeast, thus indicating enhanced exhumation in the former area. Microstructures of D2 sinistral shear zones indicate deformation temperatures of 300–400 °C. Inversion of fault slip data from the sinistral faults demonstrate that N-S compression was responsible for the D2 structures. The third phase of deformation (D3) was related to WNW-ESE extension during the middle to late Early Cretaceous (132–100 Ma). This extensional phase produced a series of NE-SW–striking normal faults and reactivated pre-existing structures. Dikes and plutons were emplaced during the D3 deformation, synchronous with the peak destruction of the NCC. Our results indicate that the eastern NCC showed temporal variations in stress and strain during the Jurassic and Cretaceous. Consistent with the slab-driven model, we suggest that this behavior represents the response of the overriding-plate to changes in subduction kinematics.

Structural evolution of the northeast Asian continental margin: an example from the western Koryak fold and thrust belt (northeast Russia)

1998 ◽  
Vol 135 (3) ◽  
pp. 311-330 ◽  
Author(s):  
ANDREI K. KHUDOLEY ◽  
SERGEI D. SOKOLOV
Keyword(s):  
Structural Evolution ◽  
Early Carboniferous ◽  
Shear Zones ◽  
Strike Slip ◽  
Thrust Belt ◽  
Northeast Russia ◽  
Existing Structures ◽  
Event Structures ◽  
Fold And Thrust Belt ◽  
Metamorphic Terranes

The western Koryak fold and thrust belt consists of a set of tectonostratigraphic terranes that contain units ranging from Lower Palaeozoic to Cenozoic. Three deformational events have been identified in the study area. The first event structures are folds, domes and shear zones with related high-pressure/low-temperature metamorphism. These structures are early Carboniferous and are only recognized in the metamorphic terranes. The second event structures are imbricate fans of thrusts and folds with southeast vergence, broken formation and serpentinite mélange. These are latest Jurassic to early Cretaceous (early Albian) and occur throughout the study area. During this event, thrusting was accompanied by dextral strike-slip faulting. The second event structures are overlapped by the Upper Albian sedimentary rocks with an angular unconformity at the base. During metamorphism associated with the first and second deformational events, some of the rocks were metamorphosed to blueschist grade and were affected by strain with axial ratios of up to 15[ratio ]1. The third deformational event is characterized by significant sinistral strike-slip displacement at higher crustal levels. This resulted in a new set of structures and rotation of pre-existing structures. The age of the sinistral strike-slip faults is interpreted to be late Cretaceous to Cenozoic. The kinematics of the second and third deformational events correspond to assumed proto-Pacific plate motions based on palaeomagnetic data.

scholarly journals Computer-aided design of multi-purpose steel headframes for mines with a new technical level

2020 ◽  
Vol 174 ◽  
pp. 01048
Author(s):  
Elena Kassikhina ◽  
Vladimir Pershin ◽  
Nina Rusakova
Keyword(s):  
Cross Sections ◽  
Computer Aided Design ◽  
Information Technologies ◽  
Three Dimensional ◽  
Numerical Control ◽  
Technical Level ◽  
Resource Saving ◽  
Existing Structures ◽  
Set Up ◽  
Aided Design

The existing structures of the steel sinking headgear and permanent headframe do not meet the requirements of resource saving (metal consumption and manpower input at installation), and the present methods of the headframe designing do not fully reflect recent possibilities of applying of the advanced information technologies. Technical level of the modern software makes it possible for designers to set up multiple numerical experiments to create a computer simulation that allows solving the problem without field and laboratory experiments, and therefore without special costs. In this regard, a mathematical simulation has been developed and based on it, software to select cross-sections of multi- purpose steel headframe elements and to calculate proper weight of its metal structures depending on the characteristics and hoisting equipment. A headframe drawing is displayed, as the results of the software work, including list of elements, obtained optimal hoisting equipment in accordance with the initial data. The software allows speeding up graphic work and reducing manpower input on calculations and paper work. The software allows developing a three-dimensional image of the structure and its functional blocks, based on the obtained initial parameters, as well as developing control software for units with numerical control (NC) in order to manufacture multi-purpose headframes.

scholarly journals Structural analysis of the Rio Preto fold belt (northwestern Bahia / southern Piauí), a doubly-vergent asymmetric fan developed during the Brasiliano Orogeny

2014 ◽  
Vol 86 (3) ◽  
pp. 1101-1113 ◽  
Author(s):  
FABRÍCIO A. CAXITO ◽  
ALEXANDRE UHLEIN ◽  
LUIZ F.G. MORALES ◽  
MARCOS EGYDIO-SILVA ◽  
JULIO C.D. SANGLARD ◽  
...  
Keyword(s):  
Structural Analysis ◽  
Structural Evolution ◽  
Shear Zones ◽  
Central Compartment ◽  
Strike Slip ◽  
Fold Belt ◽  
Main Structure ◽  
The North ◽  
Brasiliano Orogeny ◽  
Analog Models

The Rio Preto fold belt borders the northwestern São Francisco craton and shows an exquisite kilometric doubly-vergent asymmetric fan structure, of polyphasic structural evolution attributed exclusively to the Brasiliano Orogeny (∼600-540 Ma). The fold belt can be subdivided into three structural compartments: The Northern and Southern compartments showing a general NE-SW trend, separated by the Central Compartment which shows a roughly E-W trend. The change of dip of S2, a tight crenulation foliation which is the main structure of the fold belt, between the three compartments, characterizes the fan structure. The Central Compartment is characterized by sub-vertical mylonitic quartzites, which materialize a system of low-T strike slip shear zones (Malhadinha – Rio Preto Shear Zone) crosscutting the central portion of the fold belt. In comparison to published analog models, we consider that the unique structure of the Rio Preto fold belt was generated by the oblique, dextral-sense interaction between the Cristalândia do Piauí block to the north and the São Francisco craton to the south.

scholarly journals Looking beyond kinematics: 3D thermo-mechanical modelling reveals the dynamic of transform margins

2021 ◽  
Author(s):  
Anthony Jourdon ◽  
Charlie Kergaravat ◽  
Guillaume Duclaux ◽  
Caroline Huguen
Keyword(s):  
Boundary Conditions ◽  
Strain Localization ◽  
Numerical Models ◽  
Local Stress ◽  
Shear Zones ◽  
Strike Slip ◽  
Convergent Margins ◽  
Mechanical Modelling ◽  
Kinematic Models ◽  
Extension Direction

Abstract. Transform margins represent ~30 % of the non-convergent margins worldwide. Their formation and evolution have long been addressed through kinematic models that do not account for the mechanical behaviour of the lithosphere. In this study, we use high resolution 3D numerical thermo-mechanical modelling to simulate and investigate the evolution of the intra-continental strain localization under oblique extension. The obliquity is set through velocity boundary conditions that range from 15° (high obliquity) to 75° (low obliquity) every 15° for strong and weak lower continental crust rheologies. Numerical models show that the formation of localized strike-slip shear zones leading to transform continental margins always follows a thinning phase during which the lithosphere is thermally and mechanically weakened. For low (75°) to intermediate (45°) obliquity cases, the strike-slip faults are not parallel to the extension direction but form an angle of 20° to 40° with the plates' motion while for higher obliquities (30° to 15°) the strike-slip faults develop parallel to the extension direction. Numerical models also show that during the thinning of the lithosphere, the stress and strain re-orient while boundary conditions are kept constant. This evolution, due to the weakening of the lithosphere, leads to a strain localization process in three major phases: (1) strain initiates in a rigid plate where structures are sub-perpendicular to the extension direction; (2) distributed deformation with local stress field variations and formation of transtensional and strike-slip structures; (3) formation of highly localized plates boundaries stopping the intra-continental deformation. Our results call for a thorough re-evaluation of the kinematic approach to studying transform margins.

scholarly journals Creation of virtual 3D models of the existing architectonic structures using the web resources

Spatium ◽  
2016 ◽  
pp. 30-36 ◽  
Author(s):  
Petar Pejic ◽  
Sonja Krasic
Keyword(s):  
Laser Scanning ◽  
Three Dimensional ◽  
3D Models ◽  
Three Dimensional Model ◽  
Web Resources ◽  
Existing Structures ◽  
Software Packages ◽  
Physical Presence ◽  
The Creation ◽  
Three Dimensional Models

Digital three-dimensional models of the existing architectonic structures are created for the purpose of digitalization of the archive documents, presentation of buildings or an urban entity or for conducting various analyses and tests. Traditional methods for the creation of 3D models of the existing buildings assume manual measuring of their dimensions, using the photogrammetry method or laser scanning. Such approaches require considerable time spent in data acquisition or application of specific instruments and equipment. The goal of this paper is presentation of the procedure for the creation of 3D models of the existing structures using the globally available web resources and free software packages on standard PCs. This shortens the time of the production of a digital three-dimensional model of the structure considerably and excludes the physical presence at the location. In addition, precision of this method was tested and compared with the results acquired in a previous research.

scholarly journals Stretching and Contraction of Extensional Basins With Pre-Rift Salt: A Numerical Modeling Approach

2021 ◽  
Vol 9 ◽  
Author(s):  
Pablo Granado ◽  
Jonas B. Ruh ◽  
Pablo Santolaria ◽  
Philipp Strauss ◽  
Josep Anton Muñoz
Keyword(s):  
Hanging Wall ◽  
Structural Evolution ◽  
Extension Rate ◽  
Rift Basins ◽  
Basin Inversion ◽  
Accommodation Space ◽  
Basement Faults ◽  
Original Distribution ◽  
Thrust Belts ◽  
Half Graben

We present a series of 2D thermo-mechanical numerical experiments of thick-skinned crustal extension including a pre-rift salt horizon and subsequent thin-, thick-skinned, or mixed styles of convergence accompanied by surface processes. Extension localization along steep basement faults produces half-graben structures and leads to variations in the original distribution of pre-rift salt. Thick-skinned extension rate and salt rheology control hanging wall accommodation space as well as the locus and timing of minibasin grounding. Upon shortening, extension-related basement steps hinder forward propagation of evolving shallow thrust systems; conversely, if full basin inversion takes place along every individual fault, the regional salt layer is placed back to its pre-extensional configuration, constituting a regionally continuous décollement. Continued shortening and basement involvement deform the shallow fold-thrust structures and locally breaches the shallow décollement. We aim at obtaining a series of structural, stratigraphic and kinematic templates of fold-and-thrust belts involving rift basins with an intervening pre-rift salt horizon. Numerical results are compared to natural cases of salt-related inversion tectonics to better understand their structural evolution.

Three-dimensional strain accumulation and partitioning in an arcuate orogenic wedge: An example from the Himalaya

2020 ◽  
Vol 133 (1-2) ◽  
pp. 3-18 ◽  
Author(s):  
Suoya Fan ◽  
Michael A. Murphy
Keyword(s):  
Cross Sections ◽  
Three Dimensional ◽  
Western Himalaya ◽  
Shear Zones ◽  
High Elevation ◽  
Central Himalaya ◽  
Structural Style ◽  
Orogenic Wedge ◽  
Oblique Convergence ◽  
Thickness Variations

Abstract In this study, we use published geologic maps and cross-sections to construct a three-dimensional geologic model of major shear zones that make up the Himalayan orogenic wedge. The model incorporates microseismicity, megathrust coupling, and various derivatives of the topography to address several questions regarding observed crustal strain patterns and how they are expressed in the landscape. These questions include: (1) How does vertical thickening vary along strike of the orogen? (2) What is the role of oblique convergence in contributing to along-strike thickness variations and the style of deformation? (3) How do variations in the coupling along the megathrust affect the overlying structural style? (4) Do lateral ramps exist along the megathrust? (5) What structural styles underlie and are possibly responsible for the generation of high-elevation, low-relief landscapes? Our model shows that the orogenic core of the western and central Himalaya displays significant along-strike variation in its thickness, from ∼25–26 km in the western Himalaya to ∼34–42 km in the central Himalaya. The thickness of the orogenic core changes abruptly across the western bounding shear zone of the Gurla Mandhata metamorphic core complex, demonstrating a change in the style of strain there. Pressure-temperature-time results indicate that the thickness of the orogenic core at 37 Ma is 17 km. Assuming this is constant along strike from 81°E to 85°E indicates that, the western and central Nepal Himalaya have been thickened by 0.5 and 1–1.5 times, respectively. West of Gurla Mandhata the orogenic core is significantly thinner and underlies a large 11,000 km2 Neogene basin (Zhada). A broad, thick orogenic core associated with thrust duplexing is collocated with an 8500 km2 high-elevation, low-relief surface in the Mugu-Dolpa region of west Nepal. We propose that these results can be explained by oblique convergence along a megathrust with an along-strike and down-dip heterogeneous coupling pattern influenced by frontal and oblique ramps along the megathrust.

Sign in / Sign up

Export Citation Format

Share Document