scholarly journals Liquid intrusion in and extrusion from non-wettable nanopores for technological applications

2021 ◽  
Vol 94 (8) ◽  
Author(s):  
Alberto Giacomello ◽  
Carlo Massimo Casciola ◽  
Yaroslav Grosu ◽  
Simone Meloni
Keyword(s):  
Degrees Of Freedom ◽  
Rare Event ◽  
Point Of View ◽  
Molecular Systems ◽  
Nanoporous Media ◽  
Conversion Materials ◽  
Microscopic Interpretation ◽  
And Control ◽  
Kinetics Of ◽  
Theoretical Results

AbstractIn this article, we review some recent theoretical results about intrusion and extrusion of non-wetting liquids in and out of cavities of nanotextured surfaces and nanoporous materials. Nanoscale confinement allows these processes to happen at conditions which significantly differ from bulk phase coexistence. In particular, the pressure at which a liquid penetrates in and exits from cavities is of interest for many technological applications such as energy storage, dissipation, and conversion, materials with negative compressibility, ion channels, liquid chromatography, and more. Notwithstanding its technological interest, intrusion/extrusion processes are difficult to understand and control solely via experiments: the missing step is often a simple theory capable of providing a microscopic interpretation of the results, e.g., of liquid porosimetry or other techniques used in the field, especially in the case of complex nanoporous media. In this context, simulations can help shedding light on the relation between the morphology of pores, the chemical composition of the solids and liquids, and the thermodynamics and kinetics of intrusion and extrusion. Indeed, the intrusion/extrusion kinetics is determined by the presence of free energy barriers and special approaches, the so-called rare event techniques, must be used to study these processes. Usually, rare event techniques are employed to investigate processes occurring in relatively simple molecular systems, while intrusion/extrusion concerns the collective dynamics of hundreds to thousands of degrees of freedom, the molecules of a liquid entering in or exiting from a cavity, which, from the methodological point of view, is itself a challenge.

Modelling and Simulation of Suborbital Launcher for Testing

2014 ◽  
Vol 555 ◽  
pp. 32-39 ◽  
Author(s):  
Teodor Viorel Chelaru ◽  
Valentin Pana ◽  
Adrian Chelaru
Keyword(s):  
Computational Model ◽  
Degrees Of Freedom ◽  
Variable Mass ◽  
Point Of View ◽  
Original Design ◽  
Hybrid Propulsion ◽  
Rocket Motors ◽  
Multi Stage ◽  
And Control ◽  
Term Objective

The purpose of this paper is to present some aspects regarding the computational model and technical solutions for multistage suborbital launcher for testing (SLT) used to test spatial equipment and scientific measurements. The computational model consists in numerical simulation of SLT evolution for different start conditions. The launcher model presented will be with six degrees of freedom (6DOF) and variable mass. The results analysed will be the flight parameters and ballistic performances. The discussions area will focus around the technical possibility to realize a small multi-stage launcher, by recycling military rocket motors. From technical point of view, the paper is focused on national project “Suborbital Launcher for Testing” (SLT), which is based on hybrid propulsion and control systems, obtained through an original design. Therefore, while classical suborbital sounding rockets are unguided and they use as propulsion solid fuel motor having an uncontrolled ballistic flight, SLT project is introducing a different approach, by proposing the creation of a guided suborbital launcher, which is basically a satellite launcher at a smaller scale, containing its main subsystems. This is why the project itself can be considered an intermediary step in the development of a wider range of launching systems based on hybrid propulsion technology, which may have a major impact in the future European launchers programs. SLT project, as it is shown in the title, has two major objectives: first, a short term objective, which consists in obtaining a suborbital launching system which will be able to go into service in a predictable period of time, and a long term objective that consists in the development and testing of some unconventional sub-systems which will be integrated later in the satellite launcher as a part of the European space program. This is why the technical content of the project must be carried out beyond the range of the existing suborbital vehicle programs towards the current technological necessities in the space field, especially the European one.

Investigation of irradiation-induced nucleation processes in silicon and germanium

1995 ◽  
Vol 53 ◽  
pp. 224-225
Author(s):  
Harry A. Atwater ◽  
C.M. Yang ◽  
K.V. Shcheglov
Keyword(s):  
Room Temperature ◽  
Crystal Size ◽  
Initial Distribution ◽  
Engineering Control ◽  
Size Evolution ◽  
Silicon And Germanium ◽  
Ge Quantum Dot ◽  
And Control ◽  
Germanium Quantum Dots ◽  
Kinetics Of

Studies of the initial stages of nucleation of silicon and germanium have yielded insights that point the way to achievement of engineering control over crystal size evolution at the nanometer scale. In addition to their importance in understanding fundamental issues in nucleation, these studies are relevant to efforts to (i) control the size distributions of silicon and germanium “quantum dots𠇍, which will in turn enable control of the optical properties of these materials, (ii) and control the kinetics of crystallization of amorphous silicon and germanium films on amorphous insulating substrates so as to, e.g., produce crystalline grains of essentially arbitrary size.Ge quantum dot nanocrystals with average sizes between 2 nm and 9 nm were formed by room temperature ion implantation into SiO2, followed by precipitation during thermal anneals at temperatures between 30°C and 1200°C[1]. Surprisingly, it was found that Ge nanocrystal nucleation occurs at room temperature as shown in Fig. 1, and that subsequent microstructural evolution occurred via coarsening of the initial distribution.

Atomistic Simulation Study of Controlled Nanostructure Patterning

2003 ◽  
Vol 775 ◽  
Author(s):  
Byeongchan Lee ◽  
Kyeongjae Cho
Keyword(s):  
Diffusion Barrier ◽  
Atomistic Simulation ◽  
Degrees Of Freedom ◽  
Embedded Atom Method ◽  
Surface Kinetics ◽  
Bulk Properties ◽  
Embedded Atom ◽  
Kinetics Of ◽  
Dissociation Barrier ◽  
Strain Dependent

AbstractWe investigate the surface kinetics of Pt using the extended embedded-atom method, an extension of the embedded-atom method with additional degrees of freedom to include the nonbulk data from lower-coordinated systems as well as the bulk properties. The surface energies of the clean Pt (111) and Pt (100) surfaces are found to be 0.13 eV and 0.147 eV respectively, in excellent agreement with experiment. The Pt on Pt (111) adatom diffusion barrier is found to be 0.38 eV and predicted to be strongly strain-dependent, indicating that, in the compressive domain, adatoms are unstable and the diffusion barrier is lower; the nucleation occurs in the tensile domain. In addition, the dissociation barrier from the dimer configuration is found to be 0.82 eV. Therefore, we expect that atoms, once coalesced, are unlikely to dissociate into single adatoms. This essentially tells that by changing the applied strain, we can control the patterning of nanostructures on the metal surface.

DEVELOPMENT OF COMPUTERIZED MONITORING AND CONTROL SYSTEM OF THE MOBILE ROBOT’S POSITIONING ON LARGE FERROMAGNETIC SURFACES BASED ON INTELLIGENT TECHNIQUES. COMPLEX OF TASKS OF MONITORING AND AUTOMATIC CONTROL OF MOBILE

2019 ◽  
pp. 37-47
Author(s):  
Yao Yueqin ◽  
Oleksiy Kozlov ◽  
Oleksandr Gerasin ◽  
Galyna Kondratenko
Keyword(s):  
Automatic Control ◽  
Point Of View ◽  
Monitoring And Control ◽  
Large Area ◽  
Monitoring And Control System ◽  
Technical Parameters ◽  
Automatic Control Systems ◽  
Current State ◽  
Computerized Monitoring ◽  
And Control

Analysis and formalization of the monitoring and automatic control tasks of the MR for the movement and execution of various types of technological operations on inclined and vertical ferromagnetic surfaces are obtained. Generalized structure of mobile robotic complex is shown with main subsystems consideration. Critical analysis of the current state of the problem of development of universal structures of mobile robots (MRs) for the various types of technological operations execution and elaborations of computerized systems for monitoring and control of MR movement is done. In particular, wheeled, walked and crawler type MRs with pneumatic, vacuum-propeller, magnetic and magnetically operated clamping devices to grip with vertical and ceiling surfaces are reviewed. The constructive features of the crawler MR with magnetic clamping devices capable of moving along sloping ferromagnetic surfaces are considered. The basic technical parameters of the MR are shown for the further synthesis of computerized monitoring and automatic control systems. Formalization of the tasks of monitoring and control of the MR positioning at the processing of large area ferromagnetic surfaces is considered from the point of view of control theory.

Control of processing at multi-tool two-support setup

2020 ◽  
pp. 67-73
Author(s):  
N.D. YUsubov ◽  
G.M. Abbasova
Keyword(s):  
Degrees Of Freedom ◽  
Factor Model ◽  
Angular Displacement ◽  
Factor Models ◽  
Technological System ◽  
Displacement Control ◽  
Model Accuracy ◽  
Six Degrees Of Freedom ◽  
Angular Displacements ◽  
And Control

The accuracy of two-tool machining on automatic lathes is analyzed. Full-factor models of distortions and scattering fields of the performed dimensions, taking into account the flexibility of the technological system on six degrees of freedom, i. e. angular displacements in the technological system, were used in the research. Possibilities of design and control of two-tool adjustment are considered. Keywords turning processing, cutting mode, two-tool setup, full-factor model, accuracy, angular displacement, control, calculation [email protected]

ABOUT UNIFORMITY OF THE PHENOMENOLOGY AND THE MATHEMATICAL DESCRIPTION OF SO-CALLED « JOINED» ACTION OF HAZARDS AND COMBINED TOXICITY (ON THE EXAMPLE OF A COMBIBATION OF THE FLUORIDE AND THE STATIC MAGNETIC FIELD)

2016 ◽  
pp. 13-20
Author(s):  
B. A. Katsnelson ◽  
M. P. Sutunkova ◽  
N. A. Tsepilov ◽  
V. G. Panov ◽  
A. N. Varaksin ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Static Magnetic Field ◽  
Point Of View ◽  
Whole Body ◽  
Surface Model ◽  
Combined Toxicity ◽  
Fluoride Solution ◽  
Adverse Action ◽  
Biochemical Indices ◽  
And Control

Sodium fluoride solution was injected i.p. to three groups of rats at a dose equivalent to 0.1 LD50 three times a week up to 18 injections. Two out of these groups and two out of three groups were sham-injected with normal saline and were exposed to the whole body impact of a 25 mT static magnetic field (SMF) for 2 or 4 hr a day, 5 times a week. Following the exposure, various functional and biochemical indices were evaluated along with histological examination and morphometric measurements of the femur in the differently exposed and control rats. The mathematical analysis of the combined effects of the SMF and fluoride based on the a response surface model demonstrated that, in full correspondence with what we had previously found for the combined toxicity of different chemicals, the combined adverse action of a chemical plus a physical agent was characterized by a tipological diversity depending not only on particular effects these types were assessed for but on the dose and effect levels as well. From this point of view, the indices for which at least one statistically significant effect was observed could be classified as identifying (I) mainly single-factor action; (II) additive unidirectional action; (III) synergism (superadditive unidirectional action); (IV) antagonism, including both subadditive unidirectional action and all variants of contradirectional action.

scholarly journals Thermochromic aggregation-induced dual phosphorescence via temperature-dependent sp3-linked donor-acceptor electronic coupling

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Tao Wang ◽  
Zhubin Hu ◽  
Xiancheng Nie ◽  
Linkun Huang ◽  
Miao Hui ◽  
...  
Keyword(s):  
Excited State ◽  
Room Temperature ◽  
Electronic Coupling ◽  
Temperature Dependent ◽  
Molecular Systems ◽  
Donor And Acceptor ◽  
Theoretical Investigations ◽  
Donor Acceptor ◽  
And Control ◽  
Two Temperature

AbstractAggregation-induced emission (AIE) has proven to be a viable strategy to achieve highly efficient room temperature phosphorescence (RTP) in bulk by restricting molecular motions. Here, we show that by utilizing triphenylamine (TPA) as an electronic donor that connects to an acceptor via an sp3 linker, six TPA-based AIE-active RTP luminophores were obtained. Distinct dual phosphorescence bands emitting from largely localized donor and acceptor triplet emitting states could be recorded at lowered temperatures; at room temperature, only a merged RTP band is present. Theoretical investigations reveal that the two temperature-dependent phosphorescence bands both originate from local/global minima from the lowest triplet excited state (T1). The reported molecular construct serves as an intermediary case between a fully conjugated donor-acceptor system and a donor/acceptor binary mix, which may provide important clues on the design and control of high-freedom molecular systems with complex excited-state dynamics.

On the kinetics of Hadamard-type fractional differential systems

2020 ◽  
Vol 23 (2) ◽  
pp. 553-570 ◽  
Author(s):  
Li Ma
Keyword(s):  
Differential Operator ◽  
Numerical Simulations ◽  
Type Inequality ◽  
The Other ◽  
Differential Systems ◽  
Fractional Differential Systems ◽  
Fractional Differential Operator ◽  
Fractional Differential ◽  
Kinetics Of ◽  
Theoretical Results

AbstractThis paper is devoted to the investigation of the kinetics of Hadamard-type fractional differential systems (HTFDSs) in two aspects. On one hand, the nonexistence of non-trivial periodic solutions for general HTFDSs, which are considered in some functional spaces, is proved and the corresponding eigenfunction of Hadamard-type fractional differential operator is also discussed. On the other hand, by the generalized Gronwall-type inequality, we estimate the bound of the Lyapunov exponents for HTFDSs. In addition, numerical simulations are addressed to verify the obtained theoretical results.

scholarly journals Role of attitude in nurses’ responses to requests for assisted dying

2020 ◽  
pp. 096973302096677
Author(s):  
Michael Wilson ◽  
Marie Wilson ◽  
Suzanne Edwards ◽  
Lynette Cusack ◽  
Richard Wiechula
Keyword(s):  
Online Survey ◽  
Rare Event ◽  
Control Beliefs ◽  
Assisted Dying ◽  
Cross Sectional ◽  
Assisted Death ◽  
Institutional Ethics ◽  
The Face ◽  
Generalised Linear Modelling ◽  
And Control

Background: Legal assisted dying is a rare event, but as legalisation expands, requests for it will likely increase, and the nurse most often receives the informal, initial request. Objectives: To assess the effects of attitude in interaction with normative and control beliefs on an intention to respond to a request for legal assisted dying. Ethical considerations: The study had the lead author’s institutional ethics approval, and participants were informed that participation was both anonymous and voluntary. Methodology: This was a cross-sectional correlational study of 377 Australian registered nurses who completed an online survey. Generalised linear modelling assessed the effects of independent variables against intended responses to requests for legal assisted dying. Results: Compared to nurses who did not support legal assisted dying, nurses who did had stronger beliefs in patient rights, perceived social expectations to refer the request and stronger control in that intention. Nurses who did not support legal assisted dying had stronger beliefs in ethics of duty to the patient and often held dual intentions to discuss the request with the patient but also held an intention to deflect the request to consideration of alternatives. Discussion: This study advances the international literature by developing quantified models explaining the complexity of nurses’ experiences with requests for an assisted death. Attitude was operationalised in interaction with other beliefs and was identified as the strongest influence on intentions, but significantly moderated by ethical norms. Conclusion: The complex of determinants of those intentions to respond to requests for an assisted death suggests they are not isolated from each other. Nurses might have distinct intentions, but they can also hold multiple intentions even when they prioritise one. These findings present opportunities to prepare nurses in a way that enhances moral resilience in the face of complex moral encounters.

Cyclopean Vision, Size Estimation, and Presence in Orthostereoscopic Images

2001 ◽  
Vol 10 (3) ◽  
pp. 312-330 ◽  
Author(s):  
Bernard Harper ◽  
Richard Latto
Keyword(s):  
Visual System ◽  
Three Dimensional ◽  
Point Of View ◽  
Psychophysical Experiment ◽  
Size Estimation ◽  
Human Form ◽  
Image Capture ◽  
Series Of Experiments ◽  
Abstract Shapes ◽  
And Control

Stereo scene capture and generation is an important facet of presence research in that stereoscopic images have been linked to naturalness as a component of reported presence. Three-dimensional images can be captured and presented in many ways, but it is rare that the most simple and “natural” method is used: full orthostereoscopic image capture and projection. This technique mimics as closely as possible the geometry of the human visual system and uses convergent axis stereography with the cameras separated by the human interocular distance. It simulates human viewing angles, magnification, and convergences so that the point of zero disparity in the captured scene is reproduced without disparity in the display. In a series of experiments, we have used this technique to investigate body image distortion in photographic images. Three psychophysical experiments compared size, weight, or shape estimations (perceived waist-hip ratio) in 2-D and 3-D images for the human form and real or virtual abstract shapes. In all cases, there was a relative slimming effect of binocular disparity. A well-known photographic distortion is the perspective flattening effect of telephoto lenses. A fourth psychophysical experiment using photographic portraits taken at different distances found a fattening effect with telephoto lenses and a slimming effect with wide-angle lenses. We conclude that, where possible, photographic inputs to the visual system should allow it to generate the cyclopean point of view by which we normally see the world. This is best achieved by viewing images made with full orthostereoscopic capture and display geometry. The technique can result in more-accurate estimations of object shape or size and control of ocular suppression. These are assets that have particular utility in the generation of realistic virtual environments.

Sign in / Sign up

Export Citation Format

Share Document