scholarly journals Improving Drug Loading of Mucosal Solvent Cast Films Using a Combination of Hydrophilic Polymers with Amoxicillin and Paracetamol as Model Drugs

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Joshua Boateng ◽  
Justine Mani ◽  
Farnoosh Kianfar
Keyword(s):  
Drug Loading ◽  
Film Surface ◽  
Work Of Adhesion ◽  
Drug Dissolution ◽  
X Ray ◽  
Drug Diffusion ◽  
Molecular Dispersion ◽  
Swelling Capacity ◽  
Solvent Cast ◽  
Polymer Erosion

Solvent cast mucosal films with improved drug loading have been developed by combining carboxymethyl cellulose (CMC), sodium alginate (SA), and carrageenan (CAR) using paracetamol and amoxicillin as model drugs and glycerol (GLY) as plasticizer. Films were characterized using X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), folding resilience, swelling capacity, mucoadhesivity, and drug dissolution studies. SA, CMC, and GLY (5 : 3 : 6) films showed maximum amoxicillin loading of 26.3% whilst CAR, CMC, and GLY (1 : 2 : 3) films had a maximum paracetamol loading of 40%. XRPD analysis showed different physical forms of the drugs depending on the amount loaded. Films containing 29.4% paracetamol and 26.3% amoxicillin showed molecular dispersion of the drugs while excess paracetamol was observed on the film surface when the maximum 40% was loaded. Work of adhesion was similar for blank films with slightly higher cohesiveness for CAR and CMC based films, but the differences were significant between paracetamol and amoxicillin containing films. The stickiness and cohesiveness for drug loaded films were generally similar with no significant differences. The maximum percentage cumulative drug release was 84.65% and 70.59% for paracetamol and amoxicillin, respectively, with anomalous case two transport mechanism involving both drug diffusion and polymer erosion.

Mesoporous Silica Molecular Sieve based Nanocarriers: Transpiring Drug Dissolution Research

2017 ◽  
Vol 23 (3) ◽  
pp. 467-480 ◽  
Author(s):  
Satyanarayan Pattnaik ◽  
Kamla Pathak
Keyword(s):  
Drug Release ◽  
Mesoporous Silica ◽  
Molecular Sieves ◽  
Release Kinetics ◽  
Drug Loading ◽  
Scale Up ◽  
Water Soluble ◽  
Drug Dissolution ◽  
Water Soluble Drugs ◽  
Loading Methods

Background: Improvement of oral bioavailability through enhancement of dissolution for poorly soluble drugs has been a very promising approach. Recently, mesoporous silica based molecular sieves have demonstrated excellent properties to enhance the dissolution velocity of poorly water-soluble drugs. Description: Current research in this area is focused on investigating the factors influencing the drug release from these carriers, the kinetics of drug release and manufacturing approaches to scale-up production for commercial manufacture. Conclusion: This comprehensive review provides an overview of different methods adopted for synthesis of mesoporous materials, influence of processing factors on properties of these materials and drug loading methods. The drug release kinetics from mesoporous silica systems, the manufacturability and stability of these formulations are reviewed. Finally, the safety and biocompatibility issues related to these silica based materials are discussed.

scholarly journals A review of nanotechnology with an emphasis on Nanoplex

2015 ◽  
Vol 51 (2) ◽  
pp. 255-263
Author(s):  
Rupali Nanasaheb Kadam ◽  
Raosaheb Sopanrao Shendge ◽  
Vishal Vijay Pande
Keyword(s):  
Drug Delivery ◽  
Drug Delivery Systems ◽  
Drug Loading ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Conventional Drug ◽  
Anionic Drugs ◽  
Oppositely Charged ◽  
The Brain

<p>The use of nanotechnology based on the development and fabrication of nanostructures is one approach that has been employed to overcome the challenges involved with conventional drug delivery systems. Formulating Nanoplex is the new trend in nanotechnology. A nanoplex is a complex formed by a drug nanoparticle with an oppositely charged polyelectrolyte. Both cationic and anionic drugs form complexes with oppositely charged polyelectrolytes. Compared with other nanostructures, the yield of Nanoplex is greater and the complexation efficiency is better. Nanoplex are also easier to prepare. Nanoplex formulation is characterized through the production yield, complexation efficiency, drug loading, particle size and zeta potential using scanning electron microscopy, differential scanning calorimetry, X-ray diffraction and dialysis studies. Nanoplex have wide-ranging applications in different fields such as cancer therapy, gene drug delivery, drug delivery to the brain and protein and peptide drug delivery.</p>

scholarly journals Surface Stoichiometry and Depth Profile of Tix-CuyNz Thin Films Deposited by Magnetron Sputtering

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3191
Author(s):  
Arun Kumar Mukhopadhyay ◽  
Avishek Roy ◽  
Gourab Bhattacharjee ◽  
Sadhan Chandra Das ◽  
Abhijit Majumdar ◽  
...  
Keyword(s):  
Magnetron Sputtering ◽  
Photoelectron Spectroscopy ◽  
Film Surface ◽  
Grazing Incidence ◽  
X Ray Diffraction ◽  
X Ray ◽  
Relative Composition ◽  
Transmission Electron ◽  
Deposited Film ◽  
Deposited Films

We report the surface stoichiometry of Tix-CuyNz thin film as a function of film depth. Films are deposited by high power impulse (HiPIMS) and DC magnetron sputtering (DCMS). The composition of Ti, Cu, and N in the deposited film is investigated by X-ray photoelectron spectroscopy (XPS). At a larger depth, the relative composition of Cu and Ti in the film is increased compared to the surface. The amount of adventitious carbon which is present on the film surface strongly decreases with film depth. Deposited films also contain a significant amount of oxygen whose origin is not fully clear. Grazing incidence X-ray diffraction (GIXD) shows a Cu3N phase on the surface, while transmission electron microscopy (TEM) indicates a polycrystalline structure and the presence of a Ti3CuN phase.

scholarly journals Nanostructural Arrangements and Surface Morphology on Ureasil-Polyether Films Loaded with Dexamethasone Acetate

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1362
Author(s):  
Joao Augusto Oshiro ◽  
Angelo Lusuardi ◽  
Elena M. Beamud ◽  
Leila Aparecida Chiavacci ◽  
M. Teresa Cuberes
Keyword(s):  
Film Surface ◽  
Crystalline Phases ◽  
Essential Information ◽  
X Ray ◽  
Force Microscopy ◽  
Ether Oxygen ◽  
Dexamethasone Acetate ◽  
Poly Ethylene ◽  
The One ◽  
Poly Propylene

Ureasil-Poly(ethylene oxide) (ureasil-PEO500) and ureasil-Poly(propylene oxide) (u-PPO400) films, unloaded and loaded with dexamethasone acetate (DMA), have been investigated by carrying out atomic force microscopy (AFM), ultrasonic force microscopy (UFM), contact-angle, and drug release experiments. In addition, X-ray diffraction, small angle X-ray scattering, and infrared spectroscopy have provided essential information to understand the films’ structural organization. Our results reveal that while in u-PEO500 DMA occupies sites near the ether oxygen and remains absent from the film surface, in u-PPO400 new crystalline phases are formed when DMA is loaded, which show up as ~30–100 nm in diameter rounded clusters aligned along a well-defined direction, presumably related to the one defined by the characteristic polymer ropes distinguished on the surface of the unloaded u-POP film; occasionally, larger needle-shaped DMA crystals are also observed. UFM reveals that in the unloaded u-PPO matrix the polymer ropes are made up of strands, which in turn consist of aligned ~180 nm in diameter stiffer rounded clusters possibly formed by siloxane-node aggregates; the new crystalline phases may grow in-between the strands when the drug is loaded. The results illustrate the potential of AFM-based procedures, in combination with additional physico-chemical techniques, to picture the nanostructural arrangements in polymer matrices intended for drug delivery.

scholarly journals Multifunctional Biodegradable Vascular PLLA Scaffold with Improved X-ray Opacity, Anti-Inflammation, and Re-Endothelization

Polymers ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 1979
Author(s):  
Ho In Lee ◽  
Yun Heo ◽  
Seung-Woon Baek ◽  
Da-Seul Kim ◽  
Duck Hyun Song ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Inflammatory Responses ◽  
Neointimal Hyperplasia ◽  
Film Surface ◽  
High Mechanical Property ◽  
X Ray ◽  
Stent Restenosis ◽  
X Ray Computed ◽  
Hydrolysis Of

Poly(L-lactic acid) (PLLA) has been used as a biodegradable vascular scaffold (BVS) material due to high mechanical property, biodegradability, and biocompatibility. However, acidic byproducts from hydrolysis of PLLA reduce the pH after the surrounding implanted area and cause inflammatory responses. As a result, severe inflammation, thrombosis, and in-stent restenosis can occur after implantation by using BVS. Additionally, polymers such as PLLA could not find on X-ray computed tomography (CT) because of low radiopacity. To this end, here, we fabricated PLLA films as the surface of BVS and divided PLLA films into two coating layers. At the first layer, PLLA film was coated by 2,3,5-triiodobenzoic acid (TIBA) and magnesium hydroxide (MH) with poly(D,L-lactic acid) (PDLLA) for radiopaque and neutralization of acidic environment, respectively. The second layer of coated PLLA films is composed of polydopamine (PDA) and then cystamine (Cys) for the generation of nitric oxide (NO) release, which is needed for suppression of smooth muscle cells (SMCs) and proliferation of endothelial cells (ECs). The characterization of the film surface was conducted via various analyses. Through the surface modification of PLLA films, they have multifunctional abilities to overcome problems of BVS effectively such as X-ray penetrability, inflammation, thrombosis, and neointimal hyperplasia. These results suggest that the modification of biodegradable PLLA using TIBA, MH, PDA, and Cys will have important potential in implant applications.

The Microstructure and Electrical Property of Porous Cu Film on Soft PVDF Substrate

2012 ◽  
Vol 472-475 ◽  
pp. 1451-1454
Author(s):  
Xue Hui Wang ◽  
Wu Tang ◽  
Ji Jun Yang
Keyword(s):  
Electrical Properties ◽  
Film Surface ◽  
X Ray Diffraction ◽  
Si Substrate ◽  
X Ray ◽  
Cu Films ◽  
Cu Film ◽  
Diffraction Peaks ◽  
Sputtering Pressure ◽  
Effect Method

The porous Cu film was deposited on soft PVDF substrate by magnetron sputtering at different sputtering pressure. The microstructure and electrical properties of Cu films were investigated as a function of sputtering pressure by X-ray diffraction XRD and Hall effect method. The results show that the surface morphology of Cu film is porous, and the XRD revealed that there are Cu diffraction peaks with highly textured having a Cu-(220) or a mixture of Cu-(111) and Cu-(220) at sputtering pressure 0.5 Pa. The electrical properties are also severely influenced by sputtering pressure, the resistivity of the porous Cu film is much larger than that fabricated on Si substrate. Furthermore, the resistivity increases simultaneously with the increasing of Cu film surface aperture, but the resistivity of Cu film still decreases with the increasing grain size. It can be concluded that the crystal structure is still the most important factor for the porous Cu film resistivity.

scholarly journals Emerging surface characterization techniques for carbon steel corrosion: a critical brief review

2017 ◽  
Vol 473 (2199) ◽  
pp. 20160852 ◽  
Author(s):  
D. Dwivedi ◽  
K. Lepkova ◽  
T. Becker
Keyword(s):  
Carbon Steel ◽  
Analytical Methods ◽  
Surface Characterization ◽  
Construction Material ◽  
Film Surface ◽  
Surface Films ◽  
Corrosive Media ◽  
Metallic Substrates ◽  
X Ray ◽  
X Ray Absorption

Carbon steel is a preferred construction material in many industrial and domestic applications, including oil and gas pipelines, where corrosion mitigation using film-forming corrosion inhibitor formulations is a widely accepted method. This review identifies surface analytical techniques that are considered suitable for analysis of thin films at metallic substrates, but are yet to be applied to analysis of carbon steel surfaces in corrosive media or treated with corrosion inhibitors. The reviewed methods include time of flight-secondary ion mass spectrometry, X-ray absorption spectroscopy methods, particle-induced X-ray emission, Rutherford backscatter spectroscopy, Auger electron spectroscopy, electron probe microanalysis, near-edge X-ray absorption fine structure spectroscopy, X-ray photoemission electron microscopy, low-energy electron diffraction, small-angle neutron scattering and neutron reflectometry, and conversion electron Moessbauer spectrometry. Advantages and limitations of the analytical methods in thin-film surface investigations are discussed. Technical parameters of nominated analytical methods are provided to assist in the selection of suitable methods for analysis of metallic substrates deposited with surface films. The challenges associated with the applications of the emerging analytical methods in corrosion science are also addressed.

Fusion as an Approach to Enhance Dissolution Rate of a Poorly Water-Soluble Drug (Curcurmin)

2011 ◽  
Vol 393-395 ◽  
pp. 119-122
Author(s):  
Dong Hua Wan ◽  
Fen Lin ◽  
Qu Xiang Liao
Keyword(s):  
Dissolution Rate ◽  
Drug Loading ◽  
Solid Dispersions ◽  
Gastric Fluid ◽  
Molecular State ◽  
Water Soluble ◽  
Drug Dissolution ◽  
Simulated Gastric Fluid ◽  
Scanning Calorimetry ◽  
Rate Improvement

It’s well known that curcumin is practically insoluble in water. Therefore, to improve the drug dissolution rate, fusion approach was employed to prepare curcumin solid dispersions (SDs) in the carrier Pluronic F68 with three different drug loads. The dissolution rate of curcumin from the SDs was measured at simulated gastric fluid. The concentration of the dissolved drug in the medium was determined by HPLC. The dissolution rates of the formulations were dependent on the drug loading in SDs. 92.2% CUR was dissolved in 10 min from the SDs with 8.97% drug load, whereas the amounts of drug released were 65.8% and 84.2% within 120 min from the SDs with 18.9% and 29.0% drug loads, respectively. The Fourier transform infrared spectra indicated hydrogen bond between the drug and carrier. Furthermore, their physicochemical properties were well investigated using differential scanning calorimetry and X-ray diffraction. In the dispersions containing 8.97% CUR, the drug was in the molecular state. At a composition of approximately 18.9%, CUR was dispersed as micro-fine crystals. These interesting results indicate that the physical states of the drug in the carrier, which are governed by the drug loading, can affect the dissolution rate improvement.

Ultraviolet light effect on characteristics of PbZrxTi1-xO3 (PZT) film during poling process

2019 ◽  
Vol 201 (1) ◽  
pp. 12-22
Author(s):  
Chin-Chi Cheng
Keyword(s):  
Room Temperature ◽  
Uv Light ◽  
Film Surface ◽  
Light Effect ◽  
Film Properties ◽  
Impedance Analyzer ◽  
Poling Process ◽  
X Ray ◽  
Pzt Film ◽  
Corona Poling

Poling process is one of the widely used strategies to enhance the film properties during the manufacturing processes of ceramic film. A lab-made PbZrxTi1-xO3 (PZT) film by spin-coating on Ti substrate is presented. After heating treatments, the fabricated film was passed corona poling under ultraviolent (UV) light of various power. The characteristics of the PZT film have been evaluated by several instruments, such as X-ray diffractometer (XRD), scanning electron microscopy (SEM) and impedance analyzer. The results indicated that UV light would affect the orientation of crystallization, microstructure and grain size of PZT film surface during poling process under room temperature.

The piezoresistive properties research of SiC thin films prepared by RF magnetron sputtering

2019 ◽  
Vol 33 (15) ◽  
pp. 1950152 ◽  
Author(s):  
Jing Wu ◽  
Xiaofeng Zhao ◽  
Chunpeng Ai ◽  
Zhipeng Yu ◽  
Dianzhong Wen
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
Cantilever Beam ◽  
Photoelectron Spectroscopy ◽  
Film Surface ◽  
Rf Magnetron Sputtering ◽  
Micro Electro Mechanical System ◽  
Gauge Factor ◽  
X Ray ◽  
Sputtering Power

To research the piezoresistive properties of SiC thin films, a testing structure consisting of a cantilever beam, SiC thin films piezoresistors and a Cr/Pt electrode is proposed in this paper. The chips of testing structure were fabricated by micro-electro-mechanical system (MEMS) technology on a silicon wafer with [Formula: see text]100[Formula: see text] orientation, in which SiC thin films were deposited by using radio-frequency (13.56 MHz) magnetron sputtering method. The effect of sputtering power, annealing temperature and time on the microstructure and morphology of the SiC thin films were investigated by the X-ray diffraction (XRD) and scanning electron microscopy (SEM). It indicates that a good continuity and uniform particles on the SiC thin film surface can be achieved at sputtering power of 160 W after annealing. To verify the existence of Si–C bonds in the thin films, X-ray photoelectron spectroscopy (XPS) was used. Meanwhile, the piezoresistive properties of SiC thin films piezoresistors were measured using the proposed cantilever beam. The test result shows that it is possible to achieve a gauge factor of 35.1.

Sign in / Sign up

Export Citation Format

Share Document