scholarly journals Considerable Variation of Antibacterial Activity of Cu Nanoparticles Suspensions Depending on the Storage Time, Dispersive Medium, and Particle Sizes

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Olga V. Zakharova ◽  
Anna Yu. Godymchuk ◽  
Alexander A. Gusev ◽  
Svyatoslav I. Gulchenko ◽  
Inna A. Vasyukova ◽  
...  
Keyword(s):  
Storage Time ◽  
Antibacterial Properties ◽  
Physiological Solution ◽  
Cu Nanoparticles ◽  
E Coli ◽  
New Class ◽  
Low Concentrations ◽  
Nanoparticle Suspensions ◽  
Sodium Dichloroisocyanurate ◽  
Average Size

Suspensions of Cu nanoparticles are promising for creating the new class of alternative antimicrobial products. In this study we examined copper nanoparticles of various sizes obtained by the method of wire electric explosion: nanopowder average size 50 nm (Cu 50) and 100 nm (Cu 100). The paper presents the complex study of the influence of physicochemical properties such as particle size and concentration of the freshly prepared and 24-hour suspensions of Cu nanoparticles in distilled water and physiological solution upon their toxicity to bacteriaE. coliM-17. Ionic solution of Cu2+and sodium dichloroisocyanurate was used for comparison study. It has been shown that decrease in the nanoparticle size leads to changes in the correlation between toxicity and concentration as toxicity peaks are observed at low concentrations (0.0001⋯0.01 mg/L). It has been observed that antibacterial properties of Cu 50 nanoparticle suspensions are ceased after 24-hour storage, while for Cu 100 suspensions no correlation between antibacterial properties and storage time has been noted. Cu 100 nanoparticle suspensions at 10 mg/L concentration display higher toxicity at substituting physiological solution for water than Cu 50 suspensions. Dependence of the toxicity on the mean particle aggregates size in suspension was not revealed.

scholarly journals Bactericides Properties of Chitosan Metal Quantum Dots Microbial Pathogenicity Against E. coli, S. aureus, and S. Typhi

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Galo Cárdenas-Triviño ◽  
María J. Saludes-Betanzo ◽  
Luis Vergara-González
Keyword(s):  
Quantum Dots ◽  
Antibacterial Properties ◽  
Inhibition Zone ◽  
Bactericidal Effect ◽  
Salmonella Typhi ◽  
Disk Diffusion ◽  
Initial Inoculum ◽  
E Coli ◽  
Growth Inhibition Zone ◽  
Average Size

The nanotechnology is considered as a tool to overcome antibiotic-resistant infections. The aim of this study was to investigate the antibacterial properties of quantum dots (QDs) of Au, Ag, and Cu supported in chitosan against Escherichia coli (ATCC 25922), Staphylococcus aureus (ATCC 29213), and Salmonella Typhi (ATCC 9993) strains. The QDs were synthesized by the method (Chemical Liquid Deposition, CLD) using 2-ethoxyethanol as solvent (1×10−3 M approximate dispersion concentration). Then, NPs supported in chitosan were synthesized by solvated metal atom dispersion (SMAD) in two concentrations, labelled [A] and [B] (0.05 and 0.1 g/L) for each metal with chitosan resulting in an average size of Au 10±2.0, Ag 6±1.3, and Cu 10±2.4 nm, respectively. Several other techniques were performed such as TEM, SEM/EDX, TGA, DSC, and FT-IR for characterizing QDs. The antibacterial assay was performed with 8 agents on cultures of E. coli, S. aureus, and S. Typhi by disk diffusion, broth macrodilution, and determining death curve to the most sensitive pathogen. The antibacterial effect of the nanoparticles was compared using the diameter of growth inhibition zone by agar disk diffusion and through the minimal inhibitory concentration (MIC) and minimal bactericide concentration (MBC) obtained by macrodilution in batch culture with an initial inoculum of 5×105 CFU/mL. The highest bactericidal effect was obtained with nanoparticles of Au, Ag, and Cu (0.1 g/L) with MIC and MBC of 200 and 400 mg/mL, respectively. The greatest bactericidal effect considering the three pathogens turned out to be Ag QDs (0.05 and 0.1 g/L). A bactericidal effect of metal nanoparticles is affected mainly by the electronegativity, the concentration of nanoparticles, and the bacterial age culture.

scholarly journals Residual Maintenance Using Sodium Hypochlorite, Sodium Dichloroisocyanurate, and Chlorine Dioxide in Laboratory Waters of Varying Turbidity

Water ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 1309 ◽  
Author(s):  
Karin Gallandat ◽  
David Stack ◽  
Gabrielle String ◽  
Daniele Lantagne
Keyword(s):  
Sodium Hypochlorite ◽  
Chlorine Dioxide ◽  
Storage Time ◽  
Water Storage ◽  
Decay Rates ◽  
Kaolin Clay ◽  
Household Water Treatment ◽  
E Coli ◽  
Household Water ◽  
Sodium Dichloroisocyanurate

Sodium hypochlorite (NaOCl) and sodium dichloroisocyanurate (NaDCC) are commonly used for household water treatment (HWT); chlorine dioxide (ClO2) is a potential new HWT option. We compared the residual maintenance of NaOCl, NaDCC, and ClO2 over 24 hours using recommended dosages (2 and 4 mg/L) in waters of varying turbidity (0–300 NTU, from kaolin clay or creek-bottom sediments) and total organic carbon (TOC) concentrations (0–100 mg/L), for a total of 324 reactors. NaOCl and NaDCC had similar free chlorine decay rates, and ClO2 decayed more rapidly across all of the tested conditions. Little variability was observed across clay-based turbidity levels and TOC concentrations. With a dosage of 2 mg/L, a residual ≥0.2 mg/L was maintained at 30 NTU for NaOCl and 100 NTU for NaDCC; for ClO2, 4 mg/L were required to maintain ≥0.2 mg/L under all conditions except at zero turbidity. Comparisons with data from the literature suggest that the three compounds would inactivate E. coli, rotavirus, and Giardia cysts within 1 hour under all conditions, except 300 NTU for NaOCl and NaDCC. All three disinfectants are similarly efficacious for this usage; however, differences are seen in decay rates that may influence disinfectant selection depending on water storage time.

scholarly journals Biogenic Synthesis of Bi-Metallic (Zn-Cu) Nanoparticles by Leaf Extract of Citrus Limon and Evaluation of its Antibiofilm Activity Against E. coli

2021 ◽  
Vol 14 (4) ◽  
pp. 2017-2028
Author(s):  
Tooba Mazhar ◽  
Vikas Shrivastava ◽  
Rajesh Singh Tomar
Keyword(s):  
Metallic Nanoparticles ◽  
Bimetallic Nanoparticles ◽  
Average Particle Size ◽  
Antibacterial Properties ◽  
Colour Change ◽  
Antibiofilm Activity ◽  
Citrus Limon ◽  
Average Particle ◽  
Cu Nanoparticles ◽  
E Coli

The rapid hike in the usage of metallic as well as non-metallic nanoparticles demands their increased synthesis. In our study we synthesized bimetallic Zn-Cu nanoparticles using the greener route i.e. dry leaves powder of Citrus limon as it is environment-friendly, cost-effective, has a high surface area to volume ratio and hence superior over monometallic nanoparticles synthesized via physical or chemical approach. UTI is the most common nosocomial infection and the bacteria associated with it usually is E. coli. This pathogen forms biofilm and makes it difficult to treat the disease in less time. Hence, antimicrobial as well as antibiofilm activity of synthesized bimetallic nanoparticles was checked against E. coli. Our experimental procedure involved the preparation of ethanolic plant extract using dry leaf powder followed by synthesis of bimetallic nanoparticles. Particles were then characterized by using biophysical techniques such as FTIR, Powder-XRD and SEM-EDX. Next, we identified bacteria isolated from environment and hospital source and prepared their pure cultures. Lastly, we carried out the antibacterial and antibiofilm activity of synthesized nanoparticles against isolated E. coli. Particles showed the colour change from blue to green upon synthesis and were found to be a triclinic primitive type with an average particle size calculated to be 27.76nm as seen in PXRD. FTIR analysis gave characteristic peaks of functional groups. SEM-EDX confirmed successful doping and grain size of the particle. Bacteria isolated from samples showed pink rods in gram staining indicating gram-negative bacilli. Biochemical findings confirmed E. coli in samples. Characteristic zones of inhibition in range 12-18mm establish good antibacterial properties with MIC of synthesized nanoparticles <0.5mg/ml and crystal violet assay assure antibiofilm properties of Zn-Cu. The result of the study can be advantageous to develop an understanding of the development of nano-based medicine for biofilm-producing pathogens.

Prominent antibacterial effect of sub-5 nm Cu nanoparticles/MoS2 composite under visible light

2021 ◽  
Author(s):  
Jingze Li ◽  
Jiaxin Ma ◽  
Liu Hong ◽  
Cheng Yang
Keyword(s):  
Visible Light ◽  
Antibacterial Effect ◽  
Antibacterial Properties ◽  
Bactericidal Effect ◽  
Metal Nanoparticle ◽  
Oxygen Species ◽  
Cu Nanoparticles ◽  
Cost Performance ◽  
E Coli ◽  
Cu Ions

Abstract Achieving an efficient and inexpensive bactericidal effect is a key point for the design of antibacterial agent. Recent advances have proved molybdenum disulfide (MoS2) as a promising platform for antimicrobial applications, while the combination of metal nanoparticle would promote the antibacterial efficiency. Nevertheless, the dispersivity, cheapness and safety of metal nanoparticle loaded on MoS2 raised some concerns. In this paper, we successfully realized a uniform decoration of copper nanoparticles (CuNPs) on surface of MoS2 nanosheets, and the size of CuNPs could be controlled below 5 nm. Under 5 min irradiation of 660 nm visible light, the synthesized CuNPs/MoS2 composite demonstrated superior antibacterial performances (almost 100% bacterial killed) towards both Gram-negative E. coli and Gram-positive S. aureus over the single component (Cu or MoS2), while the bactericidal effect could last for at least 6 h. The synergism of photodynamic generated hydroxyl radical (∙OH), oxidative stress without reactive oxygen species (ROS) production and the release of Cu ions was considered as the mechanism for the antibacterial properties of CuNPs/MoS2. Our findings provided new insights into the development of two-dimensional antibacterial nanomaterials of high cost performance.

Immunogold labeling of CMP-KDO synthetase produced by recombinant E. Coli cells

1987 ◽  
Vol 45 ◽  
pp. 924-925
Author(s):  
F. A. Durum ◽  
R. G. Goldman ◽  
T. J. Bolling ◽  
M. F. Miller
Keyword(s):  
Inclusion Bodies ◽  
Large Scale ◽  
Recombinant Dna ◽  
Test System ◽  
Cell Protein ◽  
Gram Negative Bacteria ◽  
Cytoplasmic Inclusions ◽  
Isolation And Purification ◽  
E Coli ◽  
Low Concentrations

CMP-KDO synthetase (CKS) is an enzyme which plays a key role in the synthesis of LPS, an outer membrane component unique to gram negative bacteria. CKS activates KDO to CMP-KDO for incorporation into LPS. The enzyme is normally present in low concentrations (0.02% of total cell protein) which makes it difficult to perform large scale isolation and purification. Recently, the gene for CKS from E. coli was cloned and various recombinant DNA constructs overproducing CKS several thousandfold (unpublished data) were derived. Interestingly, no cytoplasmic inclusions of overproduced CKS were observed by EM (Fig. 1) which is in contrast to other reports of large proteinaceous inclusion bodies in various overproducing recombinant strains. The present immunocytochemical study was undertaken to localize CKS in these cells.Immune labeling conditions were first optimized using a previously described cell-free test system. Briefly, this involves soaking small blocks of polymerized bovine serum albumin in purified CKS antigen and subjecting them to various fixation, embedding and immunochemical conditions.

Large-scale High-throughput Screening Revealed 5'-(carbonylamino)-2,3'- bithiophene-4'-carboxylate as Novel Template for Antibacterial Agents

2020 ◽  
Vol 17 (5) ◽  
pp. 716-724
Author(s):  
Yan A. Ivanenkov ◽  
Renat S. Yamidanov ◽  
Ilya A. Osterman ◽  
Petr V. Sergiev ◽  
Vladimir A. Aladinskiy ◽  
...  
Keyword(s):  
Antibacterial Activity ◽  
High Throughput ◽  
High Throughput Screening ◽  
Large Scale ◽  
Antibacterial Agents ◽  
Sos Response ◽  
Luciferase Assay ◽  
Translational Machinery ◽  
E Coli ◽  
New Class

Background: The key issue in the development of novel antimicrobials is a rapid expansion of new bacterial strains resistant to current antibiotics. Indeed, World Health Organization has reported that bacteria commonly causing infections in hospitals and in the community, e.g. E. Coli, K. pneumoniae and S. aureus, have high resistance vs the last generations of cephalosporins, carbapenems and fluoroquinolones. During the past decades, only few successful efforts to develop and launch new antibacterial medications have been performed. This study aims to identify new class of antibacterial agents using novel high-throughput screening technique. Methods: We have designed library containing 125K compounds not similar in structure (Tanimoto coeff.< 0.7) to that published previously as antibiotics. The HTS platform based on double reporter system pDualrep2 was used to distinguish between molecules able to block translational machinery or induce SOS-response in a model E. coli system. MICs for most active chemicals in LB and M9 medium were determined using broth microdilution assay. Results: In an attempt to discover novel classes of antibacterials, we performed HTS of a large-scale small molecule library using our unique screening platform. This approach permitted us to quickly and robustly evaluate a lot of compounds as well as to determine the mechanism of action in the case of compounds being either translational machinery inhibitors or DNA-damaging agents/replication blockers. HTS has resulted in several new structural classes of molecules exhibiting an attractive antibacterial activity. Herein, we report as promising antibacterials. Two most active compounds from this series showed MIC value of 1.2 (5) and 1.8 μg/mL (6) and good selectivity index. Compound 6 caused RFP induction and low SOS response. In vitro luciferase assay has revealed that it is able to slightly inhibit protein biosynthesis. Compound 5 was tested on several archival strains and exhibited slight activity against gram-negative bacteria and outstanding activity against S. aureus. The key structural requirements for antibacterial potency were also explored. We found, that the unsubstituted carboxylic group is crucial for antibacterial activity as well as the presence of bulky hydrophobic substituents at phenyl fragment. Conclusion: The obtained results provide a solid background for further characterization of the 5'- (carbonylamino)-2,3'-bithiophene-4'-carboxylate derivatives discussed herein as new class of antibacterials and their optimization campaign.

scholarly journals Facile Synthesis of Carboxymethyl Cellulose Coated Core/Shell SiO2@Cu Nanoparticles and Their Antifungal Activity against Phytophthora capsici

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 888
Author(s):  
Nguyen Thi Thanh Hai ◽  
Nguyen Duc Cuong ◽  
Nguyen Tran Quyen ◽  
Nguyen Quoc Hien ◽  
Tran Thi Dieu Hien ◽  
...  
Keyword(s):  
Antifungal Activity ◽  
Carboxymethyl Cellulose ◽  
Chemical Reduction ◽  
Low Cost ◽  
Phytophthora Capsici ◽  
Reduction Process ◽  
Spherical Shape ◽  
Core Shell ◽  
Cu Nanoparticles ◽  
Average Size

Cu nanoparticles are a potential material for creating novel alternative antimicrobial products due to their unique antibacterial/antifungal properties, stability, dispersion, low cost and abundance as well as being economical and ecofriendly. In this work, carboxymethyl cellulose coated core/shell SiO2@Cu nanoparticles (NPs) were synthesized by a simple and effective chemical reduction process. The initial SiO2 NPs, which were prepared from rice husk ash, were coated by a copper ultrathin film using hydrazine and carboxymethyl cellulose (CMC) as reducing agent and stable agent, respectively. The core/shell SiO2@Cu nanoparticles with an average size of ~19 nm were surrounded by CMC. The results indicated that the SiO2@Cu@CMC suspension was a homogenous morphology with a spherical shape, regular dispersion and good stability. Furthermore, the multicomponent SiO2@Cu@CMC NPs showed good antifungal activity against Phytophthora capsici (P. capsici). The novel Cu NPs-based multicomponent suspension is a key compound in the development of new fungicides for the control of the Phytophthora disease.

scholarly journals Improved cytocompatibility and antibacterial properties of zinc-substituted brushite bone cement based on β-tricalcium phosphate

2021 ◽  
Vol 32 (9) ◽  
Author(s):  
Inna V. Fadeeva ◽  
Margarita A. Goldberg ◽  
Ilya I. Preobrazhensky ◽  
Georgy V. Mamin ◽  
Galina A. Davidova ◽  
...  
Keyword(s):  
Escherichia Coli ◽  
Tricalcium Phosphate ◽  
Bacterial Resistance ◽  
Antibacterial Properties ◽  
Modern Medicine ◽  
Physiological Solution ◽  
Final Phase ◽  
Bone Replacement ◽  
Challenging Tasks ◽  
Murine Fibroblast

AbstractFor bone replacement materials, osteoconductive, osteoinductive, and osteogenic properties are desired. The bacterial resistance and the need for new antibacterial strategies stand among the most challenging tasks of the modern medicine. In this work, brushite cements based on powders of Zinc (Zn) (1.4 wt%) substituted tricalcium phosphate (β-TCP) and non-substituted β-TCP were prepared and investigated. Their initial and final phase composition, time of setting, morphology, pH evolution, and compressive strength are reported. After soaking for 60 days in physiological solution, the cements transformed into a mixture of brushite and hydroxyapatite. Antibacterial activity of the cements against Enterococcus faecium, Escherichia coli, and Pseudomonas aeruginosa bacteria strains was attested. The absence of cytotoxicity of cements was proved for murine fibroblast NCTC L929 cells. Moreover, the cell viability on the β-TCP cement containing Zn2+ ions was 10% higher compared to the β-TCP cement without zinc. The developed cements are perspective for applications in orthopedics and traumatology.

scholarly journals Green Synthesis and Incorporation of Sericin Silver Nanoclusters into Electrospun Ultrafine Cellulose Acetate Fibers for Anti-Bacterial Applications

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1411
Author(s):  
Mujahid Mehdi ◽  
Huihui Qiu ◽  
Bing Dai ◽  
Raja Fahad Qureshi ◽  
Sadam Hussain ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Green Synthesis ◽  
Cellulose Acetate ◽  
Antibacterial Properties ◽  
Vital Role ◽  
Silver Nanoclusters ◽  
Composite Fibers ◽  
E Coli ◽  
Antibacterial Performance ◽  
Field Emission Electron Microscopy

Fiber based antibacterial materials have gained an enormous attraction for the researchers in these days. In this study, a novel Sericin Encapsulated Silver Nanoclusters (sericin-AgNCs) were synthesized through single pot and green synthesis route. Subsequently these sericin-AgNCs were incorporated into ultrafine electrospun cellulose acetate (CA) fibers for assessing the antibacterial performance. The physicochemical properties of sericin-AgNCs/CA composite fibers were investigated by transmission electron microscopy (TEM), field emission electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FTIR) and wide X-ray diffraction (XRD). The antibacterial properties of sericin-AgNCs/CA composite fibers against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were systematically evaluated. The results showed that sericin-AgNCs incorporated in ultrafine CA fibers have played a vital role for antibacterial activity. An amount of 0.17 mg/mL sericin-AgNCs to CA fibers showed more than 90% results and elevated upto >99.9% with 1.7 mg/mL of sericin-AgNCs against E. coli. The study indicated that sericin-AgNCs/CA composite confirms an enhanced antibacterial efficiency, which could be used as a promising antibacterial product.

scholarly journals Interaction of Temporin-L Analogues with the E. coli FtsZ Protein

Antibiotics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 704
Author(s):  
Angela Di Somma ◽  
Carolina Canè ◽  
Antonio Moretta ◽  
Angela Duilio
Keyword(s):  
Protein Interactions ◽  
Bacterial Infections ◽  
Antibacterial Properties ◽  
Bacterial Cell Division ◽  
Structural Determinants ◽  
E Coli ◽  
Functional Studies ◽  
Division Process ◽  
Z Ring ◽  
Peptide Complexes

The research of new therapeutic agents to fight bacterial infections has recently focused on the investigation of antimicrobial peptides (AMPs), the most common weapon that all organisms produce to prevent invasion by external pathogens. Among AMPs, the amphibian Temporins constitute a well-known family with high antibacterial properties against Gram-positive and Gram-negative bacteria. In particular, Temporin-L was shown to affect bacterial cell division by inhibiting FtsZ, a tubulin-like protein involved in the crucial step of Z-ring formation at the beginning of the division process. As FtsZ represents a leading target for new antibacterial compounds, in this paper we investigated in detail the interaction of Temporin L with Escherichia coli FtsZ and designed two TL analogues in an attempt to increase peptide-protein interactions and to better understand the structural determinants leading to FtsZ inhibition. The results demonstrated that the TL analogues improved their binding to FtsZ, originating stable protein-peptide complexes. Functional studies showed that both peptides were endowed with a high capability of inhibiting both the enzymatic and polymerization activities of the protein. Moreover, the TL analogues were able to inhibit bacterial growth at low micromolar concentrations. These observations may open up the way to the development of novel peptide or peptidomimetic drugs tailored to bind FtsZ, hampering a crucial process of bacterial life that might be proposed for future pharmaceutical applications.

Sign in / Sign up

Export Citation Format

Share Document