scholarly journals Nickel Removal from Aqueous Solution Using Chemically Treated Mahogany Sawdust as Biosorbent

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Rajesh Chanda ◽  
Amir Hamza Mithun ◽  
Md. Abu Hasan ◽  
Biplob Kumar Biswas
Keyword(s):  
Aqueous Solution ◽  
Wood Products ◽  
Waste Material ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Nickel Ion ◽  
Ion Removal ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Data Extrapolation

Sawdust is a waste material, which is generally produced during making furniture and other necessary wood products. With a view to utilizing this waste material, a biosorbent was prepared from mahogany (Swietenia macrophylla) sawdust through simple chemical treatment and was used to remove nickel ion (Ni2+) from an aqueous solution. The adsorbent material was characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and energy dispersive X-ray (EDX) analysis. The effects of biosorbent dosage (2∼18 g/L), pH of the tested solution (4∼10.5), contact time (up to 360 min), and temperature (298∼318 K) were studied in batchwise experiments. The maximum adsorption capacity of the treated sawdust was determined to be 13.42 mg/g at an optimum condition (sorbent dose of 15 g/L, pH of 9, and temperature of 298 K). The experimental data extrapolation revealed that the adsorption process fitted the Langmuir isotherm model and the kinetics was a pseudo-second-order kinetic model. The obtained thermodynamic parameters indicated that the adsorption reaction was spontaneous, endothermic, and random in nature. The study revealed that sawdust biosorbent has potential adsorption efficiency for nickel ion removal from an aqueous solution.

Fast Removal of Pb2+ from Aqueous Solution by Water Insoluble Konjac Glucomannan

2009 ◽  
Vol 610-613 ◽  
pp. 65-68 ◽  
Author(s):  
Xue Gang Luo ◽  
Feng Liu ◽  
Xiao Yan Lin
Keyword(s):  
Aqueous Solution ◽  
Correlation Coefficients ◽  
Konjac Glucomannan ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Equilibrium Process ◽  
Fast Removal

Konjac glucomannan (KGM) was converted into water insoluble konjac glucomannan (WIKGM) by treating with NaOH through completely deacetylated reaction. Adsorption study was carried out for the adsorption of Pb2+ from aqueous solution using water insoluble konjac glucomannan. The influences of pH, contact time, temperature and initial Pb2+ concentration on the absorbent were studied. Results of kinetic data showed that the Pb2+ adsorption rate was fast and good correlation coefficients were obtained for the pseudo second-order kinetic model. The equilibrium process was described well by the Langmuir isotherm model with maximum adsorption capacity of 9.18 mg/g on WIKGM at 25°C.

scholarly journals Adsorption of Lead(II) Ions from Aqueous Solution onto Lignin

2009 ◽  
Vol 27 (4) ◽  
pp. 435-445 ◽  
Author(s):  
Laura Bulgariu ◽  
Dumitru Bulgariu ◽  
Theodor Malutan ◽  
Matei Macoveanu
Keyword(s):  
Aqueous Solution ◽  
Ion Concentration ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Solution Ph ◽  
Batch System ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

The adsorption of lead(II) ions from aqueous solution onto lignin was investigated in this study. Thus, the influence of the initial solution pH, the lignin dosage, the initial Pb(II) ion concentration and the contact time were investigated at room temperature (19 ± 0.5 °C) in a batch system. Adsorption equilibrium was approached within 30 min. The adsorption kinetic data could be well described by the pseudo-second-order kinetic model, while the equilibrium data were well fitted using the Langmuir isotherm model. A maximum adsorption capacity of 32.36 mg/g was observed. The results of this study indicate that lignin has the potential to become an effective and economical adsorbent for the removal of Pb(II) ions from industrial wastewaters.

Enhanced removal of Hg(II) from acidic aqueous solution using thiol-functionalized biomass

2010 ◽  
Vol 62 (9) ◽  
pp. 2157-2166 ◽  
Author(s):  
Liyuan Chai ◽  
Qingwei Wang ◽  
Qingzhu Li ◽  
Zhihui Yang ◽  
Yunyan Wang
Keyword(s):  
Aqueous Solution ◽  
Low Cost ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Brewing Industry ◽  
Acidic Aqueous Solution ◽  
Equilibrium And Kinetics ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Spent Grain

Spent grain, the low-cost and abundant biomass produced in the brewing industry, was functionalized with thiol groups to be used as an adsorbent for Hg(II) removal from acidic aqueous solution. The adsorbents were characterized by the energy-dispersive X-ray analysis (EDAX) and Fourier transform infrared (FTIR) spectroscopy. Optimum pH for Hg(II) adsorption onto the thiol-functionalized spent grain (TFSG) was 2.0. The equilibrium and kinetics of the adsorption of Hg(II) onto TFSG from acidic aqueous solution were investigated. From the Langmuir isotherm model the maximum adsorption capacity of TFSG for Hg(II) was found to be 221.73 mg g−1, which was higher than that of most various adsorbents reported in literature. Moreover, the adsorption of Hg(II) onto TFSG followed pseudo-second-order kinetic model.

Utilization of cross-linked chitosan/bentonite composite in the removal of methyl orange from aqueous solution

2014 ◽  
Vol 71 (2) ◽  
pp. 174-182 ◽  
Author(s):  
Ruihua Huang ◽  
Qian Liu ◽  
Lujie Zhang ◽  
Bingchao Yang
Keyword(s):  
Methyl Orange ◽  
Aqueous Solutions ◽  
Ph Value ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Wide Ph Range ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Ph Range ◽  
A Minor

A kind of biocomposite was prepared by the intercalation of chitosan in bentonite and the cross-linking reaction of chitosan with glutaraldehyde, which was referred to as cross-linked chitosan/bentonite (CCS/BT) composite. Adsorptive removal of methyl orange (MO) from aqueous solutions was investigated by batch method. The adsorption of MO onto CCS/BT composite was affected by the ratio of chitosan to BT and contact time. pH value had only a minor impact on MO adsorption in a wide pH range. Adsorption kinetics was mainly controlled by the pseudo-second-order kinetic model. The adsorption of MO onto CCS/BT composite followed the Langmuir isotherm model, and the maximum adsorption capacity of CCS/BT composite calculated by the Langmuir model was 224.8 mg/g. Experimental results indicated that this adsorbent had a potential for the removal of MO from aqueous solutions.

scholarly journals Mechanosynthesis of MFe2O4 (M = Co, Ni, and Zn) Magnetic Nanoparticles for Pb Removal from Aqueous Solution

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
America R. Vazquez-Olmos ◽  
Mohamed Abatal ◽  
Roberto Y. Sato-Berru ◽  
G. K. Pedraza-Basulto ◽  
Valentin Garcia-Vazquez ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Xrd Analysis ◽  
Maximum Adsorption Capacity ◽  
Sorption Behavior ◽  
Order Kinetic ◽  
X Ray ◽  
Isotherm Adsorption ◽  
Crystallite Sizes ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Adsorption of Pb(II) from aqueous solution using MFe2O4 nanoferrites (M = Co, Ni, and Zn) was studied. Nanoferrite samples were prepared via the mechanochemical method and were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), micro-Raman, and vibrating sample magnetometry (VSM). XRD analysis confirms the formation of pure single phases of cubic ferrites with average crystallite sizes of 23.8, 19.4, and 19.2 nm for CoFe2O4, NiFe2O4, and ZnFe2O4, respectively. Only NiFe2O4 and ZnFe2O4 samples show superparamagnetic behavior at room temperature, whereas CoFe2O4 is ferromagnetic. Kinetics and isotherm adsorption studies for adsorption of Pb(II) were carried out. A pseudo-second-order kinetic describes the sorption behavior. The experimental data of the isotherms were well fitted to the Langmuir isotherm model. The maximum adsorption capacity of Pb(II) on the nanoferrites was found to be 20.58, 17.76, and 9.34 mg·g−1 for M = Co, Ni, and Zn, respectively.

scholarly journals Adsorption of tricresyl phosphate onto graphene nanomaterials from aqueous solution

2017 ◽  
Vol 76 (6) ◽  
pp. 1565-1573 ◽  
Author(s):  
Jun Liu ◽  
Siying Xia ◽  
Xiaomeng Lü ◽  
Hongxiang Shen
Keyword(s):  
Experimental Data ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Tricresyl Phosphate ◽  
Batch Mode ◽  
Order Kinetic Model ◽  
Endothermic Process ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Increasing Temperature

Phosphorus flame retardant tricresyl phosphate (TCP) adsorption on graphene nanomaterials from aqueous solutions was explored using batch and column modes. Comparative studies were performed regarding the kinetics and equilibrium of TCP adsorption on graphene oxide (GO) and graphene (G) in batch mode. The adsorption kinetics exhibited a rapid TCP uptake, and experimental data were well described by the pseudo-second-order kinetic model. Adsorption isotherm data of TCP on the two adsorbents displayed an improved TCP removal performance with increasing temperature at pH 5, while experimental data were well described by the Langmuir isotherm model with a maximum adsorption capacity of 87.7 mg·g−1 for G, and 30.7 mg·g−1 for GO) at 303 K. The thermodynamic parameters show that the adsorption reaction is a spontaneous and endothermic process. In addition, dynamic adsorption of TCP in a fixed G column confirmed a faster approach to breakthrough at high flow rate, high influent TCP concentration, and low filling height of adsorbent. Breakthrough data were successfully described by the Thomas and Yoon-Nelson models.

scholarly journals SURFACE MODIFICATION OF CANARIUM OVATUMENGL.(PILI) SHELL AS ADSORBENT OF LEAD(Pb2+) FROM AQUEOUS SOLUTION

2021 ◽  
Author(s):  
Ernesto Jr. S. Cajucom ◽  
◽  
Lolibeth V. Figueroa ◽  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Cost Effective ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Carboxylic Groups ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Surface Modified

This study was carried out to investigate the efficiency of raw pili shell (RPS) and the surface modified pili shell using EDTA (EMPS) and oxalic acid (OMPS). A comparative study on the adsorption capacity of the adsorbents was performed against lead (Pb2+) from aqueous solution. The adsorbents were characterized by FTIR, which showed higher peak of adsorption bands of carboxylic groups on the acid modified pili shells. Scanning electron microscope orSEM was also used to describe the surface morphology of the adsorbents. The linear form of Langmuir and Freundlich models were applied to represent adsorption data. The calculated equilibrium data of Pb (II) best fitted to Langmuir compare to Freundlich isotherm model with maximum adsorption capacity (qmax) of 27.03 mg/g and 45.45 mg/g using EMPS and OMPS, respectively. Kinetic sorption models were used to determine the adsorption mechanism and the kinetic data of all the adsorbents correlated (R2=1) wellwith the pseudo second order kinetic model. Among the three adsorbents, OMPS shown higher percent removal of lead compared to RPS and EMPS. The large adsorption capacity rate indicated that chemically modified pili shell in present study has great potential to be used as a cost-effective adsorbent for the removal of lead ions from the water.

scholarly journals Steel slag as low-cost adsorbent for the removal of phenanthrene and naphthalene

2018 ◽  
Vol 36 (3-4) ◽  
pp. 1160-1177 ◽  
Author(s):  
Liyun Yang ◽  
Xiaoming Qian ◽  
Zhi Wang ◽  
Yuan Li ◽  
Hao Bai ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Low Cost ◽  
Steel Slag ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Batch Experiments ◽  
Obvious Effect ◽  
X Ray ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model

This study investigates the removal effectiveness and characteristics of phenanthrene and naphthalene using low-cost steel slag with batch experiments. The adsorption characteristics of steel slag were measured and analysed using X-ray fluorescence, X-ray diffraction, and Fourier transform infrared spectroscopy. The batch experiments investigated the effect of the time gradient, pH, and steel slag dosage gradient on the adsorption of the steel slag. The results show that with time and dosage of steel slag increased, the adsorption capacity of phenanthrene and naphthalene increased and gradually became balanced, but pH had no obvious effect on the adsorption of phenanthrene and naphthalene. The Langmuir isotherm model best describes the phenanthrene and naphthalene removal by the steel slag, which shows the adsorption occurring in a monolayer. The maximum adsorption capacity of the steel slag to phenanthrene and naphthalene is 0.043 and 0.041 mg/g, respectively. A pseudo-first-order kinetic model can better represent the adsorption of phenanthrene and naphthalene by steel slag. The research demonstrates that the steel slag has a certain adsorption capacity for phenanthrene and naphthalene.

Preparation of titanate nanoflower for sorption of 75Se(IV) radioisotope from aqueous solution: Equilibrium, kinetic and thermodynamic studies

2015 ◽  
Vol 103 (12) ◽  
Author(s):  
Sahar El-Sayed Abd El-Kader Sharaf El-Deen ◽  
Karam Fatwhi Allan ◽  
Mohamed Holeil ◽  
Gehan El-Sayed Abd El-Kader Sharaf El-Deen
Keyword(s):  
Aqueous Solution ◽  
Electrostatic Interactions ◽  
Outer Sphere ◽  
Solution Temperature ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
X Ray ◽  
Adsorptive Removal ◽  
Order Kinetic Model

AbstractIn this study, the adsorptive removal of selenium (IV) from aqueous solution by titanate nanoflower (TNF) was prepared via alkaline hydrothermal method. The morphology and crystal phase of the TNF were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscope (EDX), selected area electron diffraction (SAED), thermogravimetric analysis (TGA), fourier transform infrared spectroscopy (FTIR) and specific surface area. This study was conducted to determine the influence of various operating parameters such as pH, adsorbate weight, initial anion concentration, contact time and solution temperature on the adsorptive removal of selenium (IV). Equilibrium adsorption data were analyzed using Freundlich, Langmuir and Dubinin–Radushkevich (D–R) isotherm models. The results demonstrated that the adsorption was well described by the Langmuir adsorption isotherm with the maximum adsorption capacity up to 46.52 mg/g at pH 3.5. The adsorption of Se(IV) anions onto the surface of TNF may proceed through outer sphere electrostatic interactions and/or inner-sphere complexation interaction. The kinetic data indicated that the adsorption fit well with the pseudo-second-order kinetic model. The thermodynamic parameters implied that the adsorption process was spontaneous and endothermic in nature.

scholarly journals KINETIC AND ISOTHERM STUDY OF CUPPER ADSORPTION FROM AQUEOUS SOLUTION USING WASTE EGGSHELL

2014 ◽  
Vol 22 (2) ◽  
pp. 132-140 ◽  
Author(s):  
Ayben Polat ◽  
Sukru Aslan
Keyword(s):  
Ph Value ◽  
Experimental System ◽  
Second Order ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Isotherm Study ◽  
Initial Ph ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

The sorption of Cu2+ ions from aqueous solutions by eggshell was investigated in a batch experimental system with respect to the temperature, initial Cu2+ concentrations, pH, and biosorbent doses. The adsorption equilibrium was well described by the Langmuir isotherm model with the maximum adsorption capacity of 5.05 mg Cu2+/g eggshell at 25 °C. The value of qe increased with increasing the temperature while also increases the release of Ca2+ and HCO−3 ions from the eggshell. The highest sorption of Cu onto the waste eggshell was determined at the initial pH value of 4.0. The results confirming that the adsorption reaction of Cu2+ on the eggshell was thought to be endothermic. A comparison of the kinetic models such as pseudo first and second-order kinetics, intraparticle diffusion, and Elovich on the sorption rate demonstrated that the system was best described by the pseudo second-order kinetic model.

Sign in / Sign up

Export Citation Format

Share Document